Vectors cannot be used as array indexes, however, single-component
swizzles (such as vec.x) can be used.
This suggests that single-component swizzles should actually be
scalars and not vectors of dimx = 1.
It is worth noting that the use of single-component swizzles on scalars
should still be allowed.
Co-authored-by: Francisco Casas <fcasas@codeweavers.com>
Co-authored-by: Zebediah Figura <zfigura@codeweavers.com>
Because copy_propagation_transform_object_load() replaces a deref
instead of an instruction, it is currently prone to two problems:
1- It can replace a deref with the same deref, returning true every
time and getting the compilation stuck in an endless loop of
copy-propagation iterations.
2- When performed multiple times in the same deref, the second time it
can replace the deref with a deref from a temp that is only valid in
another point of the program execution, resulting in an incorrect value.
This patch preempts this by avoiding replacing derefs when the new deref
doesn't point to a uniform variable. Because, uniform variables cannot
be written to.
Reinterpret min16float, min10float, min16int, min12int, and min16uint
as their regular counterparts: float, float, int, int, uint,
respectively.
A proper implementation would require adding minimum precision
indicators to all the dxbc-tpf instructions that use these types.
Consider the output of fxc 10.1 with the following shader:
uniform int i;
float4 main() : sv_target
{
min16float4 a = {0, 1, 2, i};
min16int2 b = {4, i};
min10float3 c = {6.4, 7, i};
min12int d = 9.4;
min16uint4x2 e = {14.4, 15, 16, 17, 18, 19, 20, i};
return mul(e, b) + a + c.xyzx + d;
}
However, if the graphics driver doesn't have minimum precision support,
it ignores the minimum precision indicators and runs at 32-bit
precision, which is equivalent as working with regular types.
If a hlsl_ir_load loads a variable whose components are stored from different
instructions, copy propagation doesn't replace it.
But if all these instructions are constants (which currently is the case
for value constructors), the load could be replaced with a constant value.
Which is expected in some other instructions, e.g. texel_offsets when
using aoffimmi modifiers.
For instance, this shader:
```
sampler s;
Texture2D t;
float4 main() : sv_target
{
return t.Gather(s, float2(0.6, 0.6), int2(0, 0));
}
```
results in the following IR before applying the patch:
```
float | 6.00000024e-01
float | 6.00000024e-01
uint | 0
| = (<constructor-2>[@4].x @2)
uint | 1
| = (<constructor-2>[@6].x @3)
float2 | <constructor-2>
int | 0
int | 0
uint | 0
| = (<constructor-5>[@11].x @9)
uint | 1
| = (<constructor-5>[@13].x @10)
int2 | <constructor-5>
float4 | gather_red(resource = t, sampler = s, coords = @8, offset = @15)
| return
| = (<output-sv_target0> @16)
```
and this IR afterwards:
```
float2 | {6.00000024e-01 6.00000024e-01 }
int2 | {0 0 }
float4 | gather_red(resource = t, sampler = s, coords = @2, offset = @3)
| return
| = (<output-sv_target0> @4)
```
On cross builds, shaders are compiled with d3dcompiler_47.dll and
run with d3dN.dll. On non-cross builds, shaders are compiled with
vkd3d-shader and run with d3dN.dll (on Windows) or Vulkan and vkd3d
(on Linux).
validate_static_object_references() validates that uninitialized static
objects are not referenced in the shader.
In case a static variable contains both numeric and object types, the
"Static variables cannot have both numeric and resource components."
error should preempt uninitialized numeric values to reach further
compilation steps.
Note that in the future we should call
validate_static_object_references() after DCE and pruning branches,
because shaders such as these compile (at least in more modern versions
of the native compiler):
Branch pruning:
```
static RWTexture2D<float> tex;
float4 main() : sv_target
{
if (0)
{
tex[int2(0, 0)] = 2;
}
return 0;
}
```
DCE:
```
static Texture2D tex;
uniform uint i;
float4 main() : sv_target
{
float4 unused = tex.Load(int3(0, 1, 2));
return 0;
}
```
These are "todo" tests in hlsl-static-initializer.shader_test
that depend on this.
We are currently not initializing static values to zero by default.
Consider the following shader:
```hlsl
static float4 va;
float4 main() : sv_target
{
return va;
}
```
we get the following output:
```
ps_5_0
dcl_output o0.xyzw
dcl_temps 2
mov r0.xyzw, r1.xyzw
mov o0.xyzw, r0.xyzw
ret
```
where r1.xyzw is not initialized.
This patch solves this by assigning the static variable the value of an
uint 0, and thus, relying on complex broadcasts.
This seems to be the behaviour of the 9.29.952.3111 version of the native
compiler, since it retrieves the following error on a shader that lacks
an initializer on a data type with object components:
```
error X3017: cannot convert from 'uint' to 'struct <unnamed>'
```
Using add_unary_arithmetic_expr() instead of hlsl_new_unary_expr()
allows the intrinsic to work with matrices.
Otherwise we get:
E5017: Aborting due to not yet implemented feature: Copying from unsupported node type.
because an HLSL_IR_EXPR reaches split_matrix_copies().
Some intrinsics have different rules for the allowed data types than
expressions:
- Vectors and matrices at the same time are not allowed, regardless of
their dimensions. Even if they have the same number of components.
- Any combination of matrices is always allowed, even those when no
matrix fits inside another, e.g.:
float2x3 is compatible with float3x2, resulting in float 2x2.
The common data type is the min on each dimension.
This is the case for max, pow, ldexp, clamp and smoothstep; which suggest that
it is the case for all intrinsics where the operation is applied element-wise.
Tests for mul() are also added as a counter-example where the operation
is not element-wise.
Until vkd3d-shader is patched, an atomic op on a typed buffer where
StorageImageReadWithoutFormat is available will cause SPIR-V validation
failure, and assertion in Mesa debug builds, because the image will be
declared with Unknown format.
Otherwise, for instance, the added test results in:
debug_hlsl_writemask: Assertion `!(writemask & ~VKD3DSP_WRITEMASK_ALL)' failed.
Which happens in allocate_variable_temp_register() when the variable's
type reg_size is <= 4 but its component count is larger, which may
happen if it contains objects.
Do not rely on a draw or dispatch command to do this.
This allows more efficiently testing syntax, in cases where testing the actual
shader functionality is not interesting.
Otherwise the test fails on a NVIDIA GeForce GTX 1050 Ti GPU.
The error being:
shader_runner:535:Section [test], line 9: Test failed: Got {2.72165507e-01, 4.08248246e-01, 5.44331014e-01, 6.80413783e-01}, expected {2.72165537e-01, 4.08248305e-01, 5.44331074e-01, 6.80413842e-01} at (0, 0).
This should silence warnings about some branches non returning any value
without requiring additional "return 0" statement or similar.
Also, in theory this might enable to compiler to optimize the program
a little bit more, though that's unlikely to have any measurable effect.
HLSL_ARRAY_ELEMENTS_COUNT_IMPLICIT (zero) is used as a temporal value
for elements_count for implicit size arrays.
This value is replaced by the correct one after parsing the initializer.
In case the implicit array is not initialized correctly, hlsl_error()
is called but the array size is kept at 0. So the rest of the code
must handle these cases.
In shader model 5.1, unlike in 5.0, declaring a multi-dimensional
object-type array with the last dimension implicit results in
an error. This happens even in presence of an initializer.
So, both gen_struct_fields() and declare_vars() first check if the
shader model is 5.1, the array elements are objects, and if there is
at least one implicit array size to handle the whole type as an
unbounded resource array.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
It is responsibility of the shader's programmer to ensure that
object references can be solved statically.
Resource arrays for ps_5_1 and vs_5_1 are an exception which is not
properly handled yet. They probably deserve a different object type.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Otherwise we get false in implicit_compatible_data_types() when passing
types that are equal but not convertible according to
convertible_data_type(); e.g. getting:
"Can't implicitly convert from Texture2D<float4> to Texture2D<float4>."
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Fixes reflections in Control appearing with only their red component.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52146
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
This currently fails if the shader loads from the UAV, because it causes
vkd3d-shader to specify the R32f format instead of Unknown.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Prepare to allow for dynamically changing the bound attachments in consecutive
draw calls.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Split the probe_vec4() directive into get_rt_readback() and release_readback().
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Move the "resource" field to a new "d3d12_resource_readback" structure
encapsulating struct resource_readback.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Strictly increasing timeline values must be mapped to fence virtual values
to avoid invalid use of Vulkan timeline semaphores. In particular, non-
increasing values and value jumps of >= 4G are permitted in d3d12.
Different virtual D3D12 command queues may map to the same Vulkan queue.
If a wait of value N is submitted on one command queue, and then a signal
for >= N is submitted on another, but they are sent to the same Vk queue,
the wait will never complete. The solution is to buffer out-of-order waits
and any subsequent queue commands until an unblocking signal value is
submitted to a different D3D12 queue, or signaled on the CPU.
Buffering out-of-order waits also fixes the old fence implementation so it
is fully functional, though a bit less efficient than timeline semaphores.
Based in part on vkd3d-proton patches by Hans-Kristian Arntzen. Unlike the
vkd3d-proton implementation, this patch does not use worker threads for
submissions to the Vulkan queue.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
We would like to allow overriding the soname of libvulkan, in which case the
tests and demos should respect that override.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
We would like to allow overriding the soname of libvulkan, in which case the
tests and demos should respect that override.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
We would like to allow overriding the soname of libvulkan, in which case the
tests and demos should respect that override.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This commit includes work by Francisco Casas.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This commit includes work by Francisco Casas.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
We will need to allocate some structures in the Vulkan backend; this is easier
if we don't need to worry about allocating them dynamically.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
We will need to allocate some structures in the Vulkan backend; this is easier
if we don't need to worry about allocating them dynamically.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
For compatibility with shader models before 4.0.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Ensures the new fence implementation using timeline semaphores handles
this correctly.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
D3D12 supports signalling a fence to a lower value, while Vulkan timeline
semaphores do not. On the GPU side this is handled by simply submitting
the signal anyway, if a test for this passes on device creation, because
working around this is impractical. For CPU signals the Vulkan semaphore
is replaced with a new one at the lower value only if no waits and/or
signals are pending on the GPU. Otherwise, a fixme is emitted.
Partly based on a vkd3d-proton patch by Hans-Kristian Arntzen (not
including the handling of lower fence values).
The old implementation is used if KHR_timeline_semaphore is not
available or GPU signals do not work for a lower value.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Use it to hold any type of resource, regardless of type and binding.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This is a bit clearer, and avoids colliding with other things named "context",
e.g. struct test_context, or d3d11 device contexts.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The existing implementation using virtual descriptor heaps, where Vk
descriptor sets are created for the bindings in the root descriptor tables,
is inefficient when multiple command lists are used with large descriptor
heaps. It also cannot support updating a descriptor set after it is bound.
This patch creates Vk sets for each D3D12 heap. Because D3D12 heaps
can contain CBV, SRV and UAV descriptors in the same heap, multiple Vk sets
are needed for each heap, however the total number of populated descriptors
is never more than (heap size + UAV counter count).
A new 'virtual_heaps' config option is introduced to make the old
implementation available when needed. It's not always possible to determine
if this is necessary when the device is created.
Up to nine Vk descriptor sets may be used. It's theoretically possible to
reduce this to eight by placing immutable samplers in the push descriptor
set layout, but contradictions in earlier versions of the Vulkan spec made
driver support inconsistent. The documentation was corrected in version
1.2.203.
This patch also adds support for UAV counter descriptor arrays. It's not
practical to add this in a separate patch due to complications with
combining the old UAV counter implementation with the new descriptor heap
implementation.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=47713
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=47154
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
They seem to work with mesa 21.3.7. Since some developers are
using older releases where the bug is not yet fixed, I am leaving
it marked as a bug.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
NVIDIA and AMD round differently the assignment of 0.5f to a UAV
of type R16G16_UNORM. NVIDIA rounds to 0x7fff and AMD to 0x8000.
According to both Vulkan and D3D12 specifications, both values
are acceptable, but the discrepancy currently appears as a
failure on NVIDIA cards.
Work around the issue by using 0.25f instead of 0.5f, which is
rounded as 0x4000 on both implementations.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The d3d12 specification forbids simultaneously binding more than one heap of a
given type.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
