Some drivers (AMD Radeon RX 6700 XT, with radeonsi from Mesa 22.2.0-rc3) emit
less than one invocation per pixel, presumably because they detect that the
shader control flow is uniform for all pixels. Having the control flow depend on
SV_Position avoids this test failure.
Cf. 34bd0dd0704c613abef8a9aa3ba2a2507ed02843 in wine.
The expected use case where a heap is freed before its contained
resources is not reasonably testable, so the ability to place a new
resource is tested instead.
Until vkd3d-shader is patched, an atomic op on a typed buffer where
StorageImageReadWithoutFormat is available will cause SPIR-V validation
failure, and assertion in Mesa debug builds, because the image will be
declared with Unknown format.
Fixes reflections in Control appearing with only their red component.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52146
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
This currently fails if the shader loads from the UAV, because it causes
vkd3d-shader to specify the R32f format instead of Unknown.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Move the "resource" field to a new "d3d12_resource_readback" structure
encapsulating struct resource_readback.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Strictly increasing timeline values must be mapped to fence virtual values
to avoid invalid use of Vulkan timeline semaphores. In particular, non-
increasing values and value jumps of >= 4G are permitted in d3d12.
Different virtual D3D12 command queues may map to the same Vulkan queue.
If a wait of value N is submitted on one command queue, and then a signal
for >= N is submitted on another, but they are sent to the same Vk queue,
the wait will never complete. The solution is to buffer out-of-order waits
and any subsequent queue commands until an unblocking signal value is
submitted to a different D3D12 queue, or signaled on the CPU.
Buffering out-of-order waits also fixes the old fence implementation so it
is fully functional, though a bit less efficient than timeline semaphores.
Based in part on vkd3d-proton patches by Hans-Kristian Arntzen. Unlike the
vkd3d-proton implementation, this patch does not use worker threads for
submissions to the Vulkan queue.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Ensures the new fence implementation using timeline semaphores handles
this correctly.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
D3D12 supports signalling a fence to a lower value, while Vulkan timeline
semaphores do not. On the GPU side this is handled by simply submitting
the signal anyway, if a test for this passes on device creation, because
working around this is impractical. For CPU signals the Vulkan semaphore
is replaced with a new one at the lower value only if no waits and/or
signals are pending on the GPU. Otherwise, a fixme is emitted.
Partly based on a vkd3d-proton patch by Hans-Kristian Arntzen (not
including the handling of lower fence values).
The old implementation is used if KHR_timeline_semaphore is not
available or GPU signals do not work for a lower value.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The existing implementation using virtual descriptor heaps, where Vk
descriptor sets are created for the bindings in the root descriptor tables,
is inefficient when multiple command lists are used with large descriptor
heaps. It also cannot support updating a descriptor set after it is bound.
This patch creates Vk sets for each D3D12 heap. Because D3D12 heaps
can contain CBV, SRV and UAV descriptors in the same heap, multiple Vk sets
are needed for each heap, however the total number of populated descriptors
is never more than (heap size + UAV counter count).
A new 'virtual_heaps' config option is introduced to make the old
implementation available when needed. It's not always possible to determine
if this is necessary when the device is created.
Up to nine Vk descriptor sets may be used. It's theoretically possible to
reduce this to eight by placing immutable samplers in the push descriptor
set layout, but contradictions in earlier versions of the Vulkan spec made
driver support inconsistent. The documentation was corrected in version
1.2.203.
This patch also adds support for UAV counter descriptor arrays. It's not
practical to add this in a separate patch due to complications with
combining the old UAV counter implementation with the new descriptor heap
implementation.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=47713
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=47154
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
They seem to work with mesa 21.3.7. Since some developers are
using older releases where the bug is not yet fixed, I am leaving
it marked as a bug.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
NVIDIA and AMD round differently the assignment of 0.5f to a UAV
of type R16G16_UNORM. NVIDIA rounds to 0x7fff and AMD to 0x8000.
According to both Vulkan and D3D12 specifications, both values
are acceptable, but the discrepancy currently appears as a
failure on NVIDIA cards.
Work around the issue by using 0.25f instead of 0.5f, which is
rounded as 0x4000 on both implementations.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This reverts commit 41230b6e76.
The tests can hang and the Wait() implementation has issues.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Testing this before NULL event handling is patched results in a crash.
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This results in a valid format instead of NULL being returned for
buffers and any other case where DXGI_FORMAT_UNKNOWN is specified.
In some cases invalid use of a buffer or DXGI_FORMAT_UNKNOWN will
not result in E_INVALIDARG, and would need to be tested explicitly
if proven to be an issue.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Extends vkd3d_instance_create_info with struct vkd3d_host_time_domain_info
to allow host ticks per second to be changed from the default 10000000.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
It's technically correct in warning about overwriting the entire
vec4 from the address of .x, if a bit overzealous. It's probably a
good warning to keep enabled.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Has no effect in Windows at least on AMD. Not calling SetDescriptorHeaps()
at all has no effect in Windows on any hardware so this is likely to be
universal too.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The Wait() implementation was added some time ago and these tests succeed.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Otherwise if the input is located above position 0 in the private array
it will be swizzled incorrectly, e.g. a.yz instead of a.xy in
test_domain_shader_inputs().
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
For isoline tessellation, "density" is specified by OL0, and "detail" by OL1.
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This specifically tests the case where "count" would end up being one for
arrayed builtins in needs_private_io_variable().
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based on a vkd3d-proton patch by Philip Rebohle.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Using vk_logic_op_from_d3d12() from a vkd3d-proton patch by Philip
Rebohle.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Windows returns E_INVALIDARG at least on AMD and Intel.
Psychonauts 2 attempts to create resources with this argument.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Part of a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Testing without the fixes in vkd3d_create_texture_uav() has nasty results in
radv and possibly others.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based in part on vkd3d-proton patches by Philip Rebohle and Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Similarly to ReadFromSubresource, WriteToSubresource is currently
implemented only for images with linear tiling, which NVIDIA drivers
currently do not support.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based in part on a vkd3d-proton patch by Joshua Ashton.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Descriptor indexing is required for its partial binding feature. Separate
buffer and image descriptor arrays are needed for implementing D3D12 SRV and
UAV descriptor ranges, so not all of the Vulkan descriptors will be populated.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Otherwise vkBindBufferMemory() or vkBindImageMemory() will fail, which
can result in a generic E_FAIL.
Based on a vkd3d-proton patch by Samuel Pitoiset which fixes a GPU hang
with Cyberpunk 2077.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
As per vkd3d-proton commit 72d9b322, E_INVALIDARG should be returned to
indicate the type of failure.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Fixes NVIDIA HairWorks GPU crash on Metro Exodus, and test failures
in test_line_tessellation().
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Source modifiers and immediate constants are not supported.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
CounterOffsetInBytes must be a multiple of the required alignment,
and must be zero if no counter buffer is specified. This allows the
test to succeed in Windows.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Like the Wine d3d11 test it was originally ported from.
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
ID3D12GraphicsCommandList2 and WriteBufferImmediate() are used by
Hitman 2, but implementing the function on top of an AMD extension has
no effect on game behaviour. It's commonly used to write debug info.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Test large DepthOrArraySize for small resources, and test compressed
textures at the 64KB limit.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
There is no bit-compatible UINT format, so we'll use DXGI_FORMAT_R32_UINT.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Addresses the following limitations of the previous implementation:
- Only R32_{UINT,TYPELESS} were supported for buffers.
- Clearing an image UAV did not behave correctly for images with non-UINT formats.
- Due to the use of transfer operations, extra memory barriers were needed.
If necessary, this will create a temporary view with a bit-compatible
UINT format for the resource in order to perform a bit-exact clear.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This fixes Shadow of the Tomb Raider crashing because of NULL root
signatures being passed since c002aee119.
Signed-off-by: R茅mi Bernon <rbernon@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
In order to exercise that the destroyed heap isn't accessed.
Signed-off-by: J贸zef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
UAV support for B8G8R8A8_UNORM appears to be present even on feature
level 11_0 on newer Windows versions.
Signed-off-by: J贸zef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The test is affected by bugs mentioned in
18442763f1.
Signed-off-by: J贸zef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
In Vulkan both behaviors are allowed.
Signed-off-by: J贸zef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Fixes crashes, Vulkan and Direct3D validation errors.
* Fix state transitions.
* Use a multisample texture with ResolveSubresource().
Signed-off-by: J贸zef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This fixes a regression introduced by commit
91820630cb.
We need to take into account the combined write mask returned from
needs_private_io_variable().
Signed-off-by: J贸zef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Allows us to create the render pass while creating the pipeline state.
Signed-off-by: J贸zef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The test checks the content of uninitialized pixel shader outputs and it
fails on Windows with Intel GPUs.
Signed-off-by: J贸zef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
