In Shader Model 6 each signature element can span a range of register
indices, or 'rows', and system values do not share a register index with
non-system values. Inputs and outputs are referenced by element index
instead of register index. This patch merges multiple signature elements
into a single element under the following conditions:
- The register index in a load or store is specified dynamically by
including a relative address parameter with a base register index. The
dcl_index_range instruction is used to identify these.
- A register declaration is split across multiple elements which declare
different components of the register.
- A patch constant function writes tessellation factors. These are an
array in SPIR-V, but in SM 5.x each factor is declared as a separate
register, and these are dynamically indexed by the fork/join instance
id. Elimination of multiple fork/join phases converts the indices to
constants, but merging the signature elements into a single arrayed
element matches the SPIR-V output.
All references to input/output register indices are converted to element
indices. If a relative address is present, the element index is moved up
a slot so it cannot be confused with a constant offset. Existing code
only handles register index relative addressing for tessellation factors.
This patch adds generic support for it.
Some drivers (AMD Radeon RX 6700 XT, with radeonsi from Mesa 22.2.0-rc3) emit
less than one invocation per pixel, presumably because they detect that the
shader control flow is uniform for all pixels. Having the control flow depend on
SV_Position avoids this test failure.
Cf. 34bd0dd0704c613abef8a9aa3ba2a2507ed02843 in wine.
The expected use case where a heap is freed before its contained
resources is not reasonably testable, so the ability to place a new
resource is tested instead.
Until vkd3d-shader is patched, an atomic op on a typed buffer where
StorageImageReadWithoutFormat is available will cause SPIR-V validation
failure, and assertion in Mesa debug builds, because the image will be
declared with Unknown format.
Fixes reflections in Control appearing with only their red component.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52146
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
This currently fails if the shader loads from the UAV, because it causes
vkd3d-shader to specify the R32f format instead of Unknown.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Move the "resource" field to a new "d3d12_resource_readback" structure
encapsulating struct resource_readback.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Strictly increasing timeline values must be mapped to fence virtual values
to avoid invalid use of Vulkan timeline semaphores. In particular, non-
increasing values and value jumps of >= 4G are permitted in d3d12.
Different virtual D3D12 command queues may map to the same Vulkan queue.
If a wait of value N is submitted on one command queue, and then a signal
for >= N is submitted on another, but they are sent to the same Vk queue,
the wait will never complete. The solution is to buffer out-of-order waits
and any subsequent queue commands until an unblocking signal value is
submitted to a different D3D12 queue, or signaled on the CPU.
Buffering out-of-order waits also fixes the old fence implementation so it
is fully functional, though a bit less efficient than timeline semaphores.
Based in part on vkd3d-proton patches by Hans-Kristian Arntzen. Unlike the
vkd3d-proton implementation, this patch does not use worker threads for
submissions to the Vulkan queue.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Ensures the new fence implementation using timeline semaphores handles
this correctly.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
D3D12 supports signalling a fence to a lower value, while Vulkan timeline
semaphores do not. On the GPU side this is handled by simply submitting
the signal anyway, if a test for this passes on device creation, because
working around this is impractical. For CPU signals the Vulkan semaphore
is replaced with a new one at the lower value only if no waits and/or
signals are pending on the GPU. Otherwise, a fixme is emitted.
Partly based on a vkd3d-proton patch by Hans-Kristian Arntzen (not
including the handling of lower fence values).
The old implementation is used if KHR_timeline_semaphore is not
available or GPU signals do not work for a lower value.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The existing implementation using virtual descriptor heaps, where Vk
descriptor sets are created for the bindings in the root descriptor tables,
is inefficient when multiple command lists are used with large descriptor
heaps. It also cannot support updating a descriptor set after it is bound.
This patch creates Vk sets for each D3D12 heap. Because D3D12 heaps
can contain CBV, SRV and UAV descriptors in the same heap, multiple Vk sets
are needed for each heap, however the total number of populated descriptors
is never more than (heap size + UAV counter count).
A new 'virtual_heaps' config option is introduced to make the old
implementation available when needed. It's not always possible to determine
if this is necessary when the device is created.
Up to nine Vk descriptor sets may be used. It's theoretically possible to
reduce this to eight by placing immutable samplers in the push descriptor
set layout, but contradictions in earlier versions of the Vulkan spec made
driver support inconsistent. The documentation was corrected in version
1.2.203.
This patch also adds support for UAV counter descriptor arrays. It's not
practical to add this in a separate patch due to complications with
combining the old UAV counter implementation with the new descriptor heap
implementation.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=47713
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=47154
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
They seem to work with mesa 21.3.7. Since some developers are
using older releases where the bug is not yet fixed, I am leaving
it marked as a bug.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
NVIDIA and AMD round differently the assignment of 0.5f to a UAV
of type R16G16_UNORM. NVIDIA rounds to 0x7fff and AMD to 0x8000.
According to both Vulkan and D3D12 specifications, both values
are acceptable, but the discrepancy currently appears as a
failure on NVIDIA cards.
Work around the issue by using 0.25f instead of 0.5f, which is
rounded as 0x4000 on both implementations.
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This reverts commit 41230b6e76.
The tests can hang and the Wait() implementation has issues.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Testing this before NULL event handling is patched results in a crash.
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This results in a valid format instead of NULL being returned for
buffers and any other case where DXGI_FORMAT_UNKNOWN is specified.
In some cases invalid use of a buffer or DXGI_FORMAT_UNKNOWN will
not result in E_INVALIDARG, and would need to be tested explicitly
if proven to be an issue.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Extends vkd3d_instance_create_info with struct vkd3d_host_time_domain_info
to allow host ticks per second to be changed from the default 10000000.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
It's technically correct in warning about overwriting the entire
vec4 from the address of .x, if a bit overzealous. It's probably a
good warning to keep enabled.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Has no effect in Windows at least on AMD. Not calling SetDescriptorHeaps()
at all has no effect in Windows on any hardware so this is likely to be
universal too.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The Wait() implementation was added some time ago and these tests succeed.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Otherwise if the input is located above position 0 in the private array
it will be swizzled incorrectly, e.g. a.yz instead of a.xy in
test_domain_shader_inputs().
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
For isoline tessellation, "density" is specified by OL0, and "detail" by OL1.
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This specifically tests the case where "count" would end up being one for
arrayed builtins in needs_private_io_variable().
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based on a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Based on a vkd3d-proton patch by Philip Rebohle.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Using vk_logic_op_from_d3d12() from a vkd3d-proton patch by Philip
Rebohle.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Windows returns E_INVALIDARG at least on AMD and Intel.
Psychonauts 2 attempts to create resources with this argument.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Part of a vkd3d-proton patch by Hans-Kristian Arntzen.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
