This codepath path is currently triggered when transpiling d3dbc shaders
that use vPos (or other of these special registers).
While vPos gets added to the input signature and gets assigned an INPUT
register, the registers in the shader instructions are still of
VKD3DSPR_MISCTYPE type and are not propperly mapped yet. This gives
invalid results.
Some SM1 tests must be set back to "todo" but they only work because, by
coincidence, we are assigning vPos the input register with index 0.
Propper mapping of these registers is still required.
Properly passing the inverse-trig.shader_test tests whose qualifiers
have been removed requires making spirv.c capable of handling ABS.
The same happens for the ps_3_0 equality test in
float-comparison.shader_test.
Values in DXIL have no signedness, so it is ambiguous whether 16-bit
constants should or should not be sign-extended when 16-bit execution
is not supported.
There is no way to tell in spirv_compiler_emit_load_reg() if the write
mask is 64-bit. All loads are 32-bit except for IMMCONST64 and SSA, and
the latter ignores the mask, so the only issue lies with IMMCONST64.
Tests have already been implemented in 92044d5e; this commit also reduces
the scope of some of the todos (because now they're implemented!).
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=55154
Co-authored-by: Giovanni Mascellani <gmascellani@codeweavers.com>
These may happen when storing to structured buffers, and we are not
handling them properly yet. The included test reaches unreacheable code
before this patch.
Storing to buffers is complicated since we need to split the index
chain in two paths:
- The path within the variable where the resource is.
- The subpath to the part of the resource element that is being stored
to.
For now, we will emit a fixme when the index chain in the lhs is not a
direct resource access.
On shader_test files, now resources should be declared this way:
[texture n] -> [srv n]
[srv buffer n] -> [srv n]
[uav n] -> [uav n]
[uav buffer n] -> [uav n]
[vertex buffer n] -> [vb n]
[render target n] -> [rtv n]
The dimension (buffer or 2D) is now specified as an additional parameter
in the "size" directive:
For 2D resources:
size (n, m) -> size (2d, n, m)
For buffers:
size (n, 1) -> size (buffer, n)
For temporary registers, SM1-SM3 integer types are internally
represented as floating point, so, in order to perform a cast
from ints to floats we need a mere MOV.
For constant integer registers "iN" there is no operation for casting
from a floating point register to them. For address registers "aN", and
the loop counting register "aL", vertex shaders have the "mova" operation
but we haven't used these registers in any way yet.
We probably would want to introduce these as synthetic variables
allocated in a special register set. In that case we have to remember to
use MOVA instead of MOV in the store operations, but they shouldn't be src
or dst of CAST operations.
Regarding constant integer registers, in some shaders, constants are
expected to be received formatted as an integer, such as:
int m;
float4 main() : sv_target
{
float4 res = {0, 0, 0, 0};
for (int k = 0; k < m; ++k)
res += k;
return res;
}
which compiles as:
// Registers:
//
// Name Reg Size
// ------------ ----- ----
// m i0 1
//
ps_3_0
def c0, 0, 1, 0, 0
mov r0, c0.x
mov r1.x, c0.x
rep i0
add r0, r0, r1.x
add r1.x, r1.x, c0.y
endrep
mov oC0, r0
but this only happens if the integer constant is used directly in an
instruction that needs it, and as I said there is no instruction that
allows converting them to a float representation.
Notice how a more complex shader, that performs operations with this
integer variable "m":
int m;
float4 main() : sv_target
{
float4 res = {0, 0, 0, 0};
for (int k = 0; k < m * m; ++k)
res += k;
return res;
}
gives the following output:
// Registers:
//
// Name Reg Size
// ------------ ----- ----
// m c0 1
//
ps_3_0
def c1, 0, 0, 1, 0
defi i0, 255, 0, 0, 0
mul r0.x, c0.x, c0.x
mov r1, c1.y
mov r0.y, c1.y
rep i0
mov r0.z, r0.x
break_ge r0.y, r0.z
add r1, r0.y, r1
add r0.y, r0.y, c1.z
endrep
mov oC0, r1
Meaning that the uniform "m" is just stored as a floating point in
"c0", the constant integer register "i0" is just set to 255 (hoping
it is a high enough value) using "defi", and the "break_ge"
involving c0 is used to break from the loop.
We could potentially use this approach to implement loops from SM3
without expecting the variables being received as constant integer
registers.
According to the D3D documentation, for SM1-SM3 constant integer
registers are only used by the 'loop' and 'rep' instructions.
These tests should actually compile and run in SM1, which is possible
if we pass the int and uint uniforms in the expected IEEE 754 float
format for SM1 shaders.
Also, bools should be passed as 1.0f or 0.0f to SM1.
When the "if" qualifier is added to a directive, the directive is
skipped if the shader->minimum_shader_model is not included in the
range.
This can be used on the "probe" directives for tests that have different
expected results on different shader models, without having to resort to
[require] blocks.
