Hull shaders have a different temps count for each phase, and the
parser only reports the count for the patch constant phase.
In order to properly check for temps count on hull shaders, we first
need to decode its phases.
For relative addressing, the vkd3d_shader_registers must point to
another vkd3d_shader_src_param. For now, use the sm4_instruction to save
them, since the only purpose of this struct is to be used as paramter
for write_sm4_instruction.
RWBuffer objects would trigger a vkd3d_unreachable() in sm4_base_type().
It would be easy enough to add the required case there, but (manual,
unfortunately) tests show that we aren't supposed to write constant
buffer entries for objects in the first place, as you'd expect.
This particular path ends up being exercised by vkd3d's internal UAV
clear shaders, but unfortunately it looks like our RDEF data may have
more issues; the ability to write tests for it would seem helpful.
None of these currently have any meaning, and none of these can currently be
parsed as distinct tokens either (i.e. they will generate a syntax error
anyway).
Co-authored-by: Evan Tang <etang@codeweavers.com>
Evan Tang reported that new fixmes appeared on the shader_runner when
running some of his tests after
f50d0ae2cb.
vkd3d:652593:fixme:shader_sm4_read_src_param Unhandled mask 0x4.
The change to blame seems to be this added line in
sm4_src_from_constant_value().
+ src->swizzle = VKD3D_SHADER_NO_SWIZZLE;
On tpf binaries the last 12 bits of each src register in an instruction
specify the swizzle, and there are 5 possible combinations:
Dimension NONE
-------- 00
Dimension SCALAR
-------- 01
Dimension VEC4, with a 4 bit writemask:
---- xxxx 00 01
Dimension VEC4, with an 8 bit swizzle:
xx xx xx xx 01 01
Dimension VEC4, with a 2bit scalar dimension number:
------ xx 10 01
So far, we have only seen src registers use 4 bit writemasks in a
single case: for vec4 constants, and it is always zero.
So we expect this:
---- 0000 00 01
Now, I probably wanted to initialize src->swizzle to zero when writing
constants, but VKD3D_SHADER_NO_SWIZZLE is not zero, it is actually the
default swizzle:
11 10 01 00
And the last 4 bits (0x4) get written in the mask part, which causes
the reader to complain.
On macOS vkd3d_shader_global_flags has underlying type unsigned long,
while uint64_t is defined as unsigned long long. This difference
causes a few warnings to be raised.
The hull shader barrier used for this was broken by I/O normalization, since
vocp is no longer exposed to the spirv backend.
Restore this barrier by checking for vocp during normalization instead.
So that they are dumped even if parsing fails, which is a circumstance
in which one likely wants to see the problematic shader.
The downside of that is that for shader types other than HLSL
the profile is not written any more in the filename. This should
not be a big problem, because in those cases the shader describes
its own type.
When dumping an HLSL shader, the id is brought in front of the profile
in the file name, in order to make it more tab-friendly: when dealing
with a directory full of shaders it's likely that the id determines
the profile, but the other way around.
This field is now analogous to vkd3d_shader_register_index.rel_addr.
Also, it makes sense to rename it now because all the constant part of
the offset is now handled to hlsl_deref.const_offset. Consequently, it
may also be NULL now.
This uint will be used for the following:
- Since SM4's relative addressing (the capability of passing a register
as an index to another register) only has whole-register granularity,
we will need to make the offset node express the offset in
whole-registers and specify the register component in this uint,
otherwise we would have to add additional / and % operations in the
output binary.
- If, after we apply constant folding and copy propagation, we determine
that the offset is a single constant node, we can store all the offset
in this uint constant, and remove the offset src.
This allows DCE to remove a good bunch of the nodes previously required
only for the offset constants, which makes the output more liteweight
and readable, and simplifies the implementation of relative addressing
when writing tpf in the following patches.
In dump_deref(), we use "c" to indicate components instead of whole
registers. Since now both the offset node and the offset uint are in
components a lowered deref would look like:
var[@42c + 2c]
But, once we express the offset node in whole registers we will remove
the "c" from the node part:
var[@22 + 3c]
Some functions work with dereferences and need to know if they are
lowered yet.
This can be known checking if deref->offset.node is NULL or
deref->data_type is NULL. I am using the latter since it keeps working
even after the following patches that split deref->offset into
constant and variable parts.
Besides simply avoiding carrying around some uninitialised data, we
check "symbol->descriptor_array" in spirv_compiler_prepare_image(), both
for separate resources and for combined resource/sampler symbols.
The declaration instruction register contains id, range first, and range
last. The backend includes range first in the variable name. After commit
e8b3561252 it was always zero, and since commit 67f0196c33 it is
UINT_MAX, so constant buffers are named, e.g., "%cb0_4294967295".
Adding extra bits to instr->opcode doesn't seem correct, given that it
is an enum.
For instance, get_opcode_info() would return NULL if additional bits are
added to instr->opcode. This is not a problem now because that function
is called when reading and not writing.
Components only span across a single regset, so instead of expecting the
regset as input for the offset, hlsl_type_get_component_offset() can
actually retrieve it.
vkd3d-shader/tpf.c:3810:39: warning: passing argument 2 of ‘sm4_register_from_node’ from incompatible pointer type [-Wincompatible-pointer-types]
vkd3d-shader/tpf.c:4750:59: warning: passing argument 3 of ‘sm4_register_from_deref’ from incompatible pointer type [-Wincompatible-pointer-types]
Change to use uint32_t as requested.
This change ensures that we don't dump the writemask for registers that
have a scalar dimension.
For instance, for this shader:
float r;
float4 main(out float d : DEPTH) : sv_target
{
d = r;
return 0;
}
we now correctly dump
dcl_output oDepth
instead of
dcl_output oDepth.x
The assumption that sampler registers never have a swizzle is not
totally correct.
For instance, for the following shader:
Texture2D tex;
sampler sam;
float4 main() : sv_target
{
return tex.GatherGreen(sam, float2(0, 0));
}
the gather instruction is being disassembled as
gather4_indexable(texture2d) o0.xyzw, l(0.0, 0.0, 0.0, 0.0), t0.xyzw, s0
instead of
gather4_indexable(texture2d)(float,float,float,float) o0.xyzw, l(0.0, 0.0, 0.0, 0.0), t0.xyzw, s0.y
(notice the missing swizzle in the last parameter s0).
This is because the Gather instructions give the sampler register a vec4
dimension (and scalar swizzle type) to indicate the channel for the
gather operation.
The solution is using the new vkd3d_shader_register.dimension instead of
checking the swizzle type.
