Francisco Casas
2b06bcc615
tests: Check that -0.0f is not less than 0.0f.
2024-03-11 22:09:44 +01:00
Francisco Casas
308c7941d4
tests: Test comparison and logic operators on SM1 vertex shaders.
...
Currently these are failing for SM1 because VKD3DSIH_SLT is not being
handled by spirv.c.
2024-03-11 22:09:43 +01:00
Francisco Casas
fda08de61d
tests/shader-runner: Pass uniforms to vertex shaders in d3d9 and d3d11.
2024-03-11 22:09:41 +01:00
Conor McCarthy
5a6fd010ac
vkd3d-shader/dxil: Implement DX intrinsic TextureGather.
2024-03-11 22:09:18 +01:00
Conor McCarthy
8337b99a2c
tests/shader-runner: Add a Gather test with non-constant offset.
2024-03-11 22:09:16 +01:00
Conor McCarthy
7fcf1b6ca2
tests/shader-runner: Add sampler comparison tests.
2024-03-11 22:09:08 +01:00
Evan Tang
4553b2a0dc
vkd3d-shader/spirv: Implement support for rasteriser-ordered views.
...
Using SPV_EXT_fragment_shader_interlock.
2024-03-08 23:36:35 +01:00
Conor McCarthy
e65055b435
vkd3d-shader/spirv: Handle the ORD and UNO instructions.
2024-03-08 23:36:14 +01:00
Conor McCarthy
94583815bc
tests/shader-runner: Add a test for FCMP_ORD (is ordered).
2024-03-08 23:36:12 +01:00
Conor McCarthy
4dafd6bedf
vkd3d: Implement GetCopyableFootprints1().
2024-03-08 23:36:08 +01:00
Conor McCarthy
197f16efa9
vkd3d: Implement CreatePlacedResource1().
2024-03-08 23:36:08 +01:00
Conor McCarthy
e5ae6bd3c2
vkd3d: Implement CreateCommittedResource2().
2024-03-08 23:36:08 +01:00
Conor McCarthy
6edba86a26
vkd3d: Implement GetResourceAllocationInfo2().
2024-03-08 23:36:08 +01:00
Conor McCarthy
2ed36efcb5
tests/d3d12: Add tests for GetCopyableFootprints1().
2024-03-08 23:36:06 +01:00
Conor McCarthy
9987b519a2
tests/d3d12: Add tests for CreatePlacedResource1().
2024-03-08 23:36:05 +01:00
Conor McCarthy
c09ae2c93f
tests/d3d12: Add tests for CreateCommittedResource2().
2024-03-08 23:36:04 +01:00
Conor McCarthy
81a4dbe52d
tests/d3d12: Add tests for GetResourceAllocationInfo2().
2024-03-08 23:36:02 +01:00
Francisco Casas
9e9b3d263f
tests: Get detailed information on failing tests.
2024-03-08 23:35:36 +01:00
Francisco Casas
faea8cd7c8
tests: Copy autotool's testsuite driver script.
...
For the driver script to run properly it is necessary to run
"autoreconf" in the source directory and call the configure script again
in the build directory.
2024-03-08 23:35:28 +01:00
Nikolay Sivov
b13d60d805
vkd3d-shader/hlsl: Add determinant() function.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-03-08 23:35:23 +01:00
Giovanni Mascellani
6163d82485
tests: Test emitting the signature.
2024-03-07 23:08:25 +01:00
Nikolay Sivov
a0d52dc385
vkd3d-shader/hlsl: Improve VertexShader/PixelShader types handling.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-03-06 23:04:25 +01:00
Nikolay Sivov
4dd1bbae40
tests: Add some tests for shader object type names.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-03-06 23:04:25 +01:00
Nikolay Sivov
8c5db57ea7
vkd3d-shader/fx: Reject fx_2_0 output without techniques.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-03-06 23:04:19 +01:00
Nikolay Sivov
dd5e42d347
vkd3d-shader/hlsl: Allow technique10 {} blocks for fx_2_0.
...
Such techniques are ignored later, but do not cause compilation errors.
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-03-06 23:04:18 +01:00
Conor McCarthy
5082893e5d
vkd3d-shader/spirv: Always use a 64-bit write mask for IMMCONST64 src params.
...
There is no way to tell in spirv_compiler_emit_load_reg() if the write
mask is 64-bit. All loads are 32-bit except for IMMCONST64 and SSA, and
the latter ignores the mask, so the only issue lies with IMMCONST64.
2024-03-06 23:04:12 +01:00
Conor McCarthy
13143700b7
tests/shader-runner: Add raw UAV tests.
2024-03-06 23:04:11 +01:00
Francisco Casas
58c456ff2b
vkd3d-shader/d3dbc: Implement bool to float cast as MOV.
...
In SM1, bools are always represented as either 0.0f or 1.0f at runtime.
2024-03-06 23:04:07 +01:00
Francisco Casas
747511131d
vkd3d-shader/hlsl: Lower non-float operators for SM1.
2024-03-06 23:04:05 +01:00
Henri Verbeet
f866fb95ad
Release 1.11.
2024-03-05 20:39:45 +01:00
Henri Verbeet
5c637d68da
tests/shader_runner: Set the SPIR-V feature flags based on the runner caps.
2024-03-04 22:34:38 +01:00
Henri Verbeet
015fde5e23
tests/shader_runner: Set the vkd3d-shader API version in the Vulkan runner.
2024-03-04 22:34:37 +01:00
Giovanni Mascellani
500b61c383
tests: Test how constant folding works on SM1.
2024-02-26 23:04:08 +01:00
Conor McCarthy
c083b1d0fc
vkd3d-shader/dxil: Implement DX intrinsic GetDimensions.
2024-02-26 23:03:48 +01:00
Conor McCarthy
2330ffdeda
vkd3d-shader/dxil: Implement DX intrinsics SampleBias and SampleLevel.
2024-02-22 22:45:34 +01:00
Conor McCarthy
cab8b781ab
vkd3d-shader/dxil: Handle raw and structured buffers in sm6_parser_emit_dx_buffer_store().
2024-02-22 22:45:07 +01:00
Conor McCarthy
ce1875c435
vkd3d-shader/dxil: Implement DX intrinsic BufferStore.
2024-02-22 22:45:06 +01:00
Conor McCarthy
b447a725ec
tests/shader-runner: Add a test for a signed int structured buffer UAV.
...
Check for backend type mismatches resulting from the absence of
signedness in SM 6.
2024-02-22 22:45:05 +01:00
Conor McCarthy
9180ea6591
tests/shader-runner: Add a test for a signed int typed buffer UAV.
...
Check for backend type mismatches resulting from the absence of
signedness in SM 6.
2024-02-22 22:45:04 +01:00
Conor McCarthy
081c9dbc96
tests/shader-runner: Support structured buffer UAVs.
2024-02-22 22:45:02 +01:00
Petrichor Park
02a3667822
vkd3d-shader/hlsl: Implement atan and atan2.
...
Also narrows some more todos on the tests.
2024-02-21 23:23:13 +01:00
Petrichor Park
69294c290b
vkd3d-shader/hlsl: Implement acos and asin trig intrinsics.
...
Tests have already been implemented in 92044d5e; this commit also reduces
the scope of some of the todos (because now they're implemented!).
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=55154
2024-02-21 23:23:11 +01:00
Conor McCarthy
96a0685ba6
vkd3d-shader/dxil: Implement DX intrinsic AtomicCompareExchange.
2024-02-20 22:50:16 +01:00
Conor McCarthy
560c9413c3
vkd3d-shader/dxil: Implement DX intrinsic AtomicBinOp.
2024-02-20 22:50:15 +01:00
Conor McCarthy
3906c12476
tests/shader-runner: Add tests for UAV atomic ops.
2024-02-20 22:50:13 +01:00
Conor McCarthy
a04f16918f
tests/shader-runner: Support scalar signed int probe values.
2024-02-20 22:50:12 +01:00
Henri Verbeet
54142eb0bd
tests/shader_runner: Print information about the run configuration in run_shader_tests().
2024-02-19 21:12:33 +01:00
Henri Verbeet
f15a0ace3e
tests/shader_runner: Print a summary of the runner capabilities in run_shader_tests().
2024-02-19 21:12:32 +01:00
Henri Verbeet
930fbcbb26
tests/shader_runner: Pass the runner capabilities to run_shader_tests().
...
Allowing these to be checked by run_shader_tests() itself, instead of
reimplementing those checks in each individual runner.
2024-02-19 21:12:30 +01:00
Evan Tang
7b41abaa1b
vkd3d-shader/hlsl: Support SV_PrimitiveID in pixel shaders.
2024-02-19 21:12:23 +01:00
Francisco Casas
8df34fce62
vkd3d-shader/hlsl: Emit fixme on non-direct resource stores.
...
Co-authored-by: Giovanni Mascellani <gmascellani@codeweavers.com>
These may happen when storing to structured buffers, and we are not
handling them properly yet. The included test reaches unreacheable code
before this patch.
Storing to buffers is complicated since we need to split the index
chain in two paths:
- The path within the variable where the resource is.
- The subpath to the part of the resource element that is being stored
to.
For now, we will emit a fixme when the index chain in the lhs is not a
direct resource access.
2024-02-19 21:12:14 +01:00
Francisco Casas
c249461e97
vkd3d-shader/hlsl: Parse Buffer types.
2024-02-19 21:11:55 +01:00
Francisco Casas
4fe9ab0a90
tests/shader-runner: Change probe directive syntax on shader_test files.
...
For consistency with the previous commit.
2024-02-19 21:11:53 +01:00
Francisco Casas
b08be04465
tests/shader-runner: Change resource declaration syntax on shader_test files.
...
On shader_test files, now resources should be declared this way:
[texture n] -> [srv n]
[srv buffer n] -> [srv n]
[uav n] -> [uav n]
[uav buffer n] -> [uav n]
[vertex buffer n] -> [vb n]
[render target n] -> [rtv n]
The dimension (buffer or 2D) is now specified as an additional parameter
in the "size" directive:
For 2D resources:
size (n, m) -> size (2d, n, m)
For buffers:
size (n, 1) -> size (buffer, n)
2024-02-19 21:11:52 +01:00
Francisco Casas
4d855611b7
tests/shader-runner: Support SRV buffers.
2024-02-19 21:11:51 +01:00
Francisco Casas
22a0f14a2f
tests/shader-runner: Separate resource_type into type and dimension.
...
If in the same shader_test file we have both a [buffer uav n] and a
[uav n] with the same slot "n", we want the last one to override the
first one instead of passing both resources to the backends.
Same for [buffer srv n] and [texture n] after we introduce SRV buffers.
2024-02-19 21:11:49 +01:00
Evan Tang
ee867bd470
vkd3d-shader/hlsl: Parse rasteriser-ordered view types.
2024-02-15 23:29:46 +01:00
Francisco Casas
e3ed5ac77e
vkd3d-shader/hlsl: Lower casts to int for SM1.
2024-02-15 23:29:39 +01:00
Francisco Casas
e62bd1927e
tests: Add simple test for implicit cast to int.
2024-02-15 23:29:39 +01:00
Francisco Casas
4b5c7e3721
vkd3d-shader/d3dbc: Implement casts from ints to floats as a MOV.
...
For temporary registers, SM1-SM3 integer types are internally
represented as floating point, so, in order to perform a cast
from ints to floats we need a mere MOV.
For constant integer registers "iN" there is no operation for casting
from a floating point register to them. For address registers "aN", and
the loop counting register "aL", vertex shaders have the "mova" operation
but we haven't used these registers in any way yet.
We probably would want to introduce these as synthetic variables
allocated in a special register set. In that case we have to remember to
use MOVA instead of MOV in the store operations, but they shouldn't be src
or dst of CAST operations.
Regarding constant integer registers, in some shaders, constants are
expected to be received formatted as an integer, such as:
int m;
float4 main() : sv_target
{
float4 res = {0, 0, 0, 0};
for (int k = 0; k < m; ++k)
res += k;
return res;
}
which compiles as:
// Registers:
//
// Name Reg Size
// ------------ ----- ----
// m i0 1
//
ps_3_0
def c0, 0, 1, 0, 0
mov r0, c0.x
mov r1.x, c0.x
rep i0
add r0, r0, r1.x
add r1.x, r1.x, c0.y
endrep
mov oC0, r0
but this only happens if the integer constant is used directly in an
instruction that needs it, and as I said there is no instruction that
allows converting them to a float representation.
Notice how a more complex shader, that performs operations with this
integer variable "m":
int m;
float4 main() : sv_target
{
float4 res = {0, 0, 0, 0};
for (int k = 0; k < m * m; ++k)
res += k;
return res;
}
gives the following output:
// Registers:
//
// Name Reg Size
// ------------ ----- ----
// m c0 1
//
ps_3_0
def c1, 0, 0, 1, 0
defi i0, 255, 0, 0, 0
mul r0.x, c0.x, c0.x
mov r1, c1.y
mov r0.y, c1.y
rep i0
mov r0.z, r0.x
break_ge r0.y, r0.z
add r1, r0.y, r1
add r0.y, r0.y, c1.z
endrep
mov oC0, r1
Meaning that the uniform "m" is just stored as a floating point in
"c0", the constant integer register "i0" is just set to 255 (hoping
it is a high enough value) using "defi", and the "break_ge"
involving c0 is used to break from the loop.
We could potentially use this approach to implement loops from SM3
without expecting the variables being received as constant integer
registers.
According to the D3D documentation, for SM1-SM3 constant integer
registers are only used by the 'loop' and 'rep' instructions.
2024-02-15 23:29:37 +01:00
Conor McCarthy
99947deeb7
tests/d3d12: Add a test for zero description count in test_resource_allocation_info().
2024-02-15 23:29:32 +01:00
Conor McCarthy
4668271872
vkd3d: Return DXGI_ERROR_NOT_FOUND from GetProtectedResourceSession().
2024-02-15 23:29:32 +01:00
Conor McCarthy
e38f3995fd
tests/d3d12: Add tests for GetProtectedResourceSession().
2024-02-15 23:29:30 +01:00
Evan Tang
628acb6b96
tests: Add some tests for rasteriser-ordered views.
2024-02-14 21:48:53 +01:00
Henri Verbeet
f614d98759
tests/shader_runner: Allow UAV resources to be created without initial data.
...
We can e.g. initialise these with a shader.
2024-02-14 21:48:51 +01:00
Conor McCarthy
7d51a7d99c
tests/shader-runner: Add a 64-bit switch test.
2024-02-14 21:48:44 +01:00
Conor McCarthy
5a76cedf87
vkd3d-shader/dxil: Implement DX intrinsic SampleGrad.
2024-02-14 21:48:08 +01:00
Conor McCarthy
5178fb7364
vkd3d-shader/dxil: Implement DX intrinsic Sample.
2024-02-14 21:48:06 +01:00
Henri Verbeet
0f3a42c34b
tests: Implement check_requirements() for the OpenGL shader runner.
2024-02-13 22:51:36 +01:00
Francisco Casas
6a8939e19f
tests: Remove [require] directives for tests that use int and bool uniforms.
...
These tests should actually compile and run in SM1, which is possible
if we pass the int and uint uniforms in the expected IEEE 754 float
format for SM1 shaders.
Also, bools should be passed as 1.0f or 0.0f to SM1.
2024-02-13 22:51:23 +01:00
Francisco Casas
22c47e57f5
tests/shader-runner: Introduce "if" qualifier.
...
When the "if" qualifier is added to a directive, the directive is
skipped if the shader->minimum_shader_model is not included in the
range.
This can be used on the "probe" directives for tests that have different
expected results on different shader models, without having to resort to
[require] blocks.
2024-02-13 22:51:22 +01:00
Francisco Casas
faec42e8a1
tests: Don't ignore SM1 on a non-const-indexing.shader_test test.
...
The previous [require] block makes us skip the test for SM4.
2024-02-13 22:51:20 +01:00
Francisco Casas
0f9f5269e9
tests/vkd3d-shader: Set uninitialized uniforms to a value.
...
Avoids a potential source of non-determinism because the padding bytes
between uniforms could be left uninitialized.
2024-02-13 22:51:19 +01:00
Giovanni Mascellani
2359ebc976
tests: Release the code blob in test_thread_id() (Valgrind).
2024-02-09 22:47:47 +01:00
Giovanni Mascellani
4ba324d37c
tests: Work around a Metal bug.
...
This test currently hit a Metal bug when run on Apple Silicon with
MoltenVK and fails. We don't have an easy way to mark shader runner
tests as buggy and we're not interested in tracking that bug anyway,
so I'm just working around it.
2024-02-07 22:59:27 +01:00
Conor McCarthy
625e289574
vkd3d-shader/dxil: Handle hyperbolic trigonometric functions in sm6_parser_emit_dx_unary().
2024-02-07 22:59:23 +01:00
Conor McCarthy
c2f6985454
tests/shader-runner: Add hyperbolic trigonometry tests.
2024-02-07 22:59:22 +01:00
Conor McCarthy
c35ec4f820
vkd3d-shader/dxil: Implement DX intrinsic TextureStore.
2024-02-07 22:59:18 +01:00
Conor McCarthy
cf4ed988d0
tests/shader-runner: Add shader model 6 texture UAV tests.
...
The UAV default register allocation rules changed with SM 5.1.
2024-02-07 22:59:16 +01:00
Conor McCarthy
805a4bc1e8
tests/shader-runner: Emit descriptor ranges for consecutive resources.
...
Shader models >= 5.1 support descriptor indexing, and emit arrayed
resource declarations.
2024-02-07 22:59:15 +01:00
Conor McCarthy
7f87a3e5fc
vkd3d-shader/spirv: Handle the ACOS, ASIN and ATAN instructions in spirv_compiler_emit_ext_glsl_instruction().
2024-02-06 23:09:55 +01:00
Petrichor Park
e6746cbbdc
tests/shader-runner: Add tests for atan and atan2 trig intrinsics.
...
Extracted by Conor McCarthy from an HLSL patch, with ulp values
doubled in some cases to cover SM 6 results.
2024-02-06 23:09:48 +01:00
Petrichor Park
92044d5e41
tests/shader-runner: Add tests for acos and asin trig intrinsics.
...
Extracted by Conor McCarthy from an HLSL patch, and modified to include
SM 6 variations.
2024-02-06 23:09:46 +01:00
Henri Verbeet
532e902a56
vkd3d-common: Get rid of InterlockedDecrement().
2024-02-06 23:07:36 +01:00
Henri Verbeet
c64921e79b
vkd3d-common: Get rid of InterlockedIncrement().
2024-02-06 23:07:36 +01:00
Giovanni Mascellani
51f13391e6
vkd3d-shader/ir: Introduce a simple control flow graph structurizer.
...
The structurizer is implemented along the lines of what is usually called
the "structured program theorem": the control flow is completely
virtualized by mean of an additional TEMP register which stores the
block index which is currently running. The whole program is then
converted to a huge switch construction enclosed in a loop, executing
at each iteration the appropriate block and updating the register
depending on block jump instruction.
The algorithm's generality is also its major weakness: it accepts any
input program, even if its CFG is not reducible, but the output
program lacks any useful convergence information. It satisfies the
letter of the SPIR-V requirements, but it is expected that it will
be very inefficient to run on a GPU (unless a downstream compiler is
able to devirtualize the control flow and do a proper convergence
analysis pass). The algorithm is however very simple, and good enough
to at least pass tests, enabling further development. A better
alternative is expected to be upstreamed incrementally.
Side note: the structured program theorem is often called the
Böhm-Jacopini theorem; Böhm and Jacopini did indeed prove a variation
of it, but their algorithm is different from what is commontly attributed
to them and implemented here, so I opted for not using their name.
2024-02-06 23:07:07 +01:00
Conor McCarthy
eae4b7b4a2
vkd3d: Implement GetResourceAllocationInfo1().
2024-02-01 22:25:13 +01:00
Conor McCarthy
67b4ae658a
tests/d3d12: Add tests for GetResourceAllocationInfo1().
2024-02-01 22:25:12 +01:00
Conor McCarthy
7e84421b9c
vkd3d: Support multiple descriptions in GetResourceAllocationInfo().
2024-02-01 22:25:11 +01:00
Conor McCarthy
8d0331df6c
tests/d3d12: Test multiple descriptions in test_resource_allocation_info().
2024-02-01 22:25:10 +01:00
Conor McCarthy
95e4222cc6
vkd3d-shader/spirv: Emit a vector bitcast if necessary in spirv_compiler_emit_load_ssa_reg().
2024-02-01 22:25:04 +01:00
Conor McCarthy
ebec0aa434
vkd3d-shader/dxil: Implement DX intrinsic TextureLoad.
2024-02-01 22:25:02 +01:00
Conor McCarthy
e6d52861e9
vkd3d-shader/dxil: Implement DX intrinsic SplitDouble.
2024-02-01 22:24:58 +01:00
Conor McCarthy
254e812b12
tests/shader-runner: Add an asuint() test to the 64-bit cast tests.
2024-02-01 22:24:57 +01:00
Evan Tang
13ac795061
tests/shader-runner: Support testing for integer pixel data.
...
Modified by Conor McCarthy to use read_uint() and read_uint4().
2024-02-01 22:24:54 +01:00
Henri Verbeet
fef30dac2c
vkd3d-shader/d3dbc: Do not fail parsing the shader when undeclared inputs are encountered.
...
These can be disassembled by D3DDisassemble() just fine, and perhaps
more importantly, shader model 1 vertex shaders do not require dcl_
instructions in Direct3D 8.
2024-01-29 22:33:46 +01:00
Henri Verbeet
8c6f5b847b
vkd3d-utils: Implement D3DDisassemble().
...
Very loosely based on Wine's d3dcompiler_43.
2024-01-29 22:33:44 +01:00
Francisco Casas
13f713f74b
vkd3d-shader/hlsl: Turn register(cX) reservations into buffer offset for SM4.
2024-01-29 22:33:27 +01:00
Francisco Casas
c7f7636534
vkd3d-shader/hlsl: Make register(cX) reservations work for SM1.
2024-01-29 22:33:25 +01:00
Francisco Casas
4791c7c23b
tests: Test register(cX) reservations.
2024-01-29 22:33:25 +01:00
Francisco Casas
d7d4c9bc90
tests: Rename register-reservations.shader_test to register-reservations-resources.shader_test.
2024-01-29 22:33:25 +01:00
Giovanni Mascellani
fd7d23f64b
tests: Mark a strip cut test as buggy in MoltenVK.
...
Metal, and therefore MoltenVK, doesn't support disabling primitive
restart.
2024-01-25 22:25:05 +01:00
Giovanni Mascellani
c5469c85e8
tests: Mark a depth sampling test as buggy on MoltenVK.
...
MoltenVK seems to be unable to handle tight inequalities (i.e.,
0.5 <= 0.5) properly on 16 bit depth resources.
2024-01-25 22:25:03 +01:00
Giovanni Mascellani
b6c1e6dcdf
tests: Mark the tessellation pipeline as buggy on MoltenVK.
2024-01-25 22:25:03 +01:00
Giovanni Mascellani
74a14dad28
tests: Mark geometry shaders as buggy on MoltenVK.
2024-01-25 22:25:03 +01:00
Giovanni Mascellani
586ebeafec
tests: Mark ReadFromSubresource() and WriteToSubresource() as todo on MoltenVK.
2024-01-25 22:25:03 +01:00
Giovanni Mascellani
17f3f2914e
tests: Mark a test related to instanced draws as buggy on MoltenVK.
...
I haven't been able to understand what's happening here exactly,
but it doesn't look like we're generating bad Vulkan calls.
2024-01-25 22:25:01 +01:00
Conor McCarthy
f954724870
vkd3d-shader/spirv: Handle the TAN instruction in spirv_compiler_emit_ext_glsl_instruction().
2024-01-25 22:24:44 +01:00
Conor McCarthy
2a260b8d56
vkd3d-shader/dxil: Implement DX intrinsics Cos and Sin.
2024-01-25 22:24:41 +01:00
Francisco Casas
d7ffdd7340
tests/shader_runner: Free runner->cs_source and runner->fx_source (valgrind).
2024-01-25 22:24:34 +01:00
Francisco Casas
70e1924e6e
tests/shader_runner: Free runner->input_elements in parse_test_directive() (valgrind).
2024-01-25 22:24:33 +01:00
Francisco Casas
8379e5337c
tests/shader_runner: Free extensions pointer on vulkan runner (valgrind).
2024-01-25 22:24:32 +01:00
Francisco Casas
48e61fa323
tests/shader_runner: Free runner->uniforms (valgrind).
2024-01-25 22:24:31 +01:00
Francisco Casas
969350a280
tests/shader_runner: Free params.data on test directives (valgrind).
2024-01-25 22:24:30 +01:00
Francisco Casas
8f9b48c455
tests/shader_runner: Pass a pointer to the data when creating uav buffers in d3d12.
...
The implementation of upload_buffer_data_with_states(), unlike the
implementation of upload_texture_data_with_states(), does not expect a
pointer to a D3D12_SUBRESOURCE_DATA, but rather, a direct pointer to the
data.
2024-01-25 22:24:29 +01:00
Giovanni Mascellani
d304422a34
tests: Mark count buffers as buggy on MoltenVK.
...
They require Vulkan indirect draw count extension.
2024-01-24 22:38:28 +01:00
Giovanni Mascellani
5d4edba925
tests: Mark a timestamp query test as buggy on MoltenVK.
...
The generated Vulkan calls look right and do not trigger any
validation error, but the returned timestamp is 0. A valid
timestamp is returned if the CopyResource() call is commented,
or the second EndQuery() call is moved before CopyResource(),
or the first EndQuery() call is commented. I am not seeing any
sensible pattern here, so I guess there is just a bug in
MoltenVK.
2024-01-24 22:38:26 +01:00
Giovanni Mascellani
66cd2af188
tests: Mark clip distance as unsupported on MoltenVK.
...
At least for tessellation and geometry shaders.
2024-01-24 22:38:23 +01:00
Giovanni Mascellani
9a83e568b4
tests: Mark cull distance as buggy on MoltenVK.
...
The generated MSL code is not accepted by the Metal runtime, and
it looks wrong anyway.
2024-01-24 22:38:19 +01:00
Giovanni Mascellani
60e0246436
tests: Skip unbounded descriptor ranges tests when they're unsupported.
...
They are unsupported if the Vulkan descriptor indexing extension
is not available; on MoltenVK it is known to be buggy, so it is
disabled.
2024-01-24 22:38:18 +01:00
Giovanni Mascellani
711ce4e65d
tests: Mark loading from stencil as buggy on MoltenVK.
...
Specifically, MoltenVK seems to be able to load from stencil, but
the specific replicating swizzle (repeating the stencil value on
all the channels) is not honored. The stencil value is read only
on the red channel.
2024-01-24 22:38:15 +01:00
Conor McCarthy
e973271a40
vkd3d-shader/spirv: Handle the ISINF and ISNAN instructions in spirv_compiler_emit_alu_instruction().
2024-01-24 22:38:04 +01:00
Conor McCarthy
cd674d593e
vkd3d-shader/spirv: Implement the ISFINITE instruction.
2024-01-24 22:38:03 +01:00
Conor McCarthy
35d46cf3d9
tests/shader-runner: Add tests for floating point special values.
2024-01-24 22:38:00 +01:00
Zebediah Figura
0f46e7bbad
tests: Test signature reflection via D3DReflect().
...
Ported from Wine.
2024-01-24 22:37:53 +01:00
Zebediah Figura
d1be80e08d
tests: Test VKD3D_SHADER_COMPILE_OPTION_BACKCOMPAT_MAP_SEMANTIC_NAMES.
2024-01-24 22:37:53 +01:00
Francisco Casas
1c73513425
tests: Use the vulkan runner to run SM1 compilation tests.
...
At the current moment this is a little odd because for SM1 [test]
directives are skipped, and the [shader] directives are not executed by
the shader_runner_vulkan.c:compile_shader() but by the general
shader_runner.c:compile_shader(). So in principle it is a little weird
that we go through the vulkan runner.
But fret not, because in the future we plan to make the parser agnostic
to the language of the tests, so we will get rid of the general
shader_runner.c:compile_shader() function and instead call a
runner->compile_shader() function, defined for each runner. Granted,
most of these may call a generic implementation that uses native
compiler in Windows, and vkd3d-shader on Linux, but it would be more
conceptually correct.
2024-01-24 22:37:44 +01:00
Francisco Casas
671f4ec2b2
tests/shader-runner: Call each runner only once.
...
If the runners require multiple calls to run_shader_tests() for
different shader model ranges, these are moved inside the sole runner
call.
For the same reason, the trace() messages are also moved inside the
runner calls.
2024-01-24 22:37:34 +01:00
Francisco Casas
79de3ec766
tests/shader-runner: Support reading multiple model range args for qualifiers.
...
We can now pass (sm<4) and (sm>=4) to "fail" and "todo" qualifiers, and
we can use multiple of these qualifier arguments using "&" for AND and
"|" for OR.
examples:
todo(sm>=4 & sm<6)
todo(sm<4 | sm>6)
parenthesis are not supported.
Adding additional model ranges for the tests, if we need them, should be
easier now, since they only have to be added to the "valid_args" array.
2024-01-24 22:37:30 +01:00
Zebediah Figura
57c4a13024
tests: Add tests for valid conditional types.
2024-01-23 20:26:47 +01:00
Conor McCarthy
b3903636f7
vkd3d-shader/dxil: Implement DX intrinsic Binary.
2024-01-23 20:26:29 +01:00
Nikolay Sivov
2c1905b780
vkd3d-shader/hlsl: Allow annotations on techniques.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-01-23 20:26:19 +01:00
Nikolay Sivov
341963bbec
tests/hlsl: Add some tests for annotations.
2024-01-23 20:26:14 +01:00
Giovanni Mascellani
72e2eeaf14
tests: Add a test for SV_ViewportArrayIndex.
2024-01-22 22:19:16 +01:00
Giovanni Mascellani
bd84b96e9f
tests: Use test utils to create the pipeline state in test_ps_layer().
2024-01-22 22:19:16 +01:00
Giovanni Mascellani
245cce02bd
tests: Test using SV_RenderTargetArrayIndex in the vertex shader.
2024-01-22 22:19:16 +01:00
Giovanni Mascellani
5ddf745d95
tests: Compile HLSL shaders at runtime in test_ps_layer().
2024-01-22 22:19:15 +01:00
Conor McCarthy
55c7cd5c22
vkd3d-shader/dxil: Handle semantic kind ISFRONTFACE.
2024-01-22 22:18:33 +01:00
Conor McCarthy
9f409b67d7
vkd3d-shader/dxil: Handle semantic kind VERTEXID.
2024-01-22 22:18:32 +01:00
Conor McCarthy
ca7487a56d
vkd3d-shader/spirv: Handle UINT32_MAX result from FIRSTBIT_HI and FIRSTBIT_SHI instructions.
2024-01-22 22:18:27 +01:00
Conor McCarthy
62e15dac8d
tests/d3d12: Add a raw firstbit test to test_shader_instructions().
2024-01-22 22:18:25 +01:00
Zebediah Figura
9ad48f16ea
vkd3d-shader/hlsl: Forbid mismatched argument types in ternaries.
2024-01-18 23:15:44 +01:00
Zebediah Figura
275901557c
vkd3d-shader/hlsl: Handle scalar values in ternaries.
2024-01-18 23:15:43 +01:00
Zebediah Figura
11112798c8
vkd3d-shader/hlsl: Handle scalar conditions in ternaries.
2024-01-18 23:15:42 +01:00
Zebediah Figura
2c8751478f
vkd3d-shader/hlsl: Forbid objects in ternary conditions.
2024-01-18 23:15:41 +01:00
Giovanni Mascellani
93100edb4b
tests: Test a couple of degenerate switch instances.
2024-01-18 23:15:35 +01:00
Giovanni Mascellani
6cb7487fb0
tests: Add a test with non-trivial control flow.
2024-01-18 23:15:35 +01:00
Conor McCarthy
83851133c5
vkd3d-shader/ir: Set merged signature element interpolation mode only from used elements.
2024-01-18 23:15:27 +01:00
Conor McCarthy
759362b527
tests: Test an interpolated PS input where component x is unused.
...
FXC does not emit an interpolation mode for unused elements.
2024-01-18 23:15:26 +01:00
Conor McCarthy
4c30b23821
vkd3d-shader: Make the control point count the outer dimension of I/O arrays.
...
The relative-addressed case in shader_register_normalise_arrayed_addressing()
leaves the control point id in idx[0], while for constant register
indices it is placed in idx[1]. The latter case could be fixed instead,
but placing the control point count in the outer dimension is more
logical.
2024-01-17 22:28:59 +01:00
Conor McCarthy
b8561d6fd2
tests: Test punned array access in patch constant functions.
...
The FXC optimiser sometimes converts a local array of input values into
direct array addressing of the inputs, which can result in a
dcl_indexrange instruction spanning input elements with different masks.
2024-01-17 22:28:58 +01:00
Zebediah Figura
16962ac6f1
vkd3d-shader/hlsl: Allow non-numeric types in the ternary operator.
2024-01-17 22:28:51 +01:00
Zebediah Figura
9ac210eb1e
tests: Add many more tests for ternary expressions.
2024-01-17 22:28:50 +01:00
Nikolay Sivov
e7d65d39ba
vkd3d-shader/fx: Initial support for fx_5_0 output.
2024-01-15 19:57:42 +01:00
Francisco Casas
43ff28b00b
vkd3d-shader/hlsl: Emit fixmes on non-constant vector addressing.
...
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=56162
Storing to a vector component using a non-constant index is not allowed
on profiles lower than 6.0. Unless this happens inside a loop that can be
unrolled, which we are not doing yet.
For this reason, a validate_nonconstant_vector_store_derefs pass is
added to detect these cases.
Ideally we would want to emit an hlsl_error on this pass, but before
implementing loop unrolling, we could reach this point on valid HLSL.
Also, as pointed out by Nikolay in the mentioned bug, currently
new_offset_from_path_index() fails an assertion when this happens,
because it expects an hlsl_ir_constant, so a check is added.
It also felt correct to emit an hlsl_fixme there, despite the
redundancy.
2024-01-15 19:57:12 +01:00
Conor McCarthy
c5bc28b454
tests/d3d12: Test vector parameter for countbits() and firstbithigh() in test_shader_instructions().
2024-01-15 19:56:36 +01:00
Nikolay Sivov
a0207436f2
vkd3d-shader/tpf: Add initial support for writing fx_4_0/fx_4_1 binaries.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-01-11 23:04:48 +01:00
Nikolay Sivov
e527d7c1e7
vkd3d-shader/hlsl: Handle effect group statement.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-01-11 23:04:46 +01:00
Nikolay Sivov
f7a02a5da2
vkd3d-shader/hlsl: Add variables for techniques.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-01-11 23:04:45 +01:00
Nikolay Sivov
c3af1f9989
vkd3d-shader/hlsl: Add 'fxgroup' token.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-01-11 23:04:42 +01:00
Nikolay Sivov
ffae369748
tests: Add some tests for effects groups syntax.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-01-11 23:04:42 +01:00
Giovanni Mascellani
90bcc6691d
tests: Mark resource arrays as buggy on MoltenVK.
...
They require Vulkan descriptor indexing extension, which is
exposed by MoltenVK but known to be buggy, so we assume it is
disabled.
2024-01-08 21:44:58 +01:00
Giovanni Mascellani
a610ccaed9
tests: Mark predicated rendering as buggy on MoltenVK.
...
It requires Vulkan conditional rendering extension.
2024-01-08 21:44:56 +01:00
Giovanni Mascellani
54514ba7dd
tests: Mark streaming output as buggy on MoltenVK.
...
It requires Vulkan transform feedback extension.
2024-01-08 21:44:55 +01:00
Giovanni Mascellani
1cc2ccaf98
tests: Mark some sampling tests as buggy on MoltenVK.
...
Apparently Metal doesn't support specifying a bias directly in the
sampler, and, with "nearest" mip filtering, it doesn't switch
precisely at LOD 0.5 (though still between 0.5 and 0.6).
2024-01-08 21:44:53 +01:00
Giovanni Mascellani
9c9b1fadbd
tests: Use a uint target for rendering uint data.
...
This fixes a failure in MoltenVK.
2024-01-08 21:44:50 +01:00
Zebediah Figura
1ce7e3d8b1
vkd3d-shader/d3dbc: Assign unique register indices for VKD3DSPR_RASTOUT.
2024-01-04 22:23:09 +01:00
Henri Verbeet
62f18f749b
tests: Print the failing line numbers when a test fails.
...
Currently, if a probe fails, it will print the line number of the [test]
block the probe is in, not the line number of the probe itself. This
makes it somewhat difficult to debug.
This commit makes it print the line number that a test fails at.
2024-01-02 23:03:25 +01:00
Conor McCarthy
812f01c2e2
vkd3d-shader/spirv: Handle ITOI and UTOU in spirv_compiler_map_alu_instruction().
...
These instructions perform integer casts to/from 64 bits.
2024-01-02 23:03:07 +01:00
Conor McCarthy
99924d913b
vkd3d-shader/spirv: Support 64-bit sources in spirv_compiler_emit_int_div().
2024-01-02 23:03:05 +01:00
Conor McCarthy
13459a55f1
vkd3d-shader/spirv: Introduce a UINT64 component type.
2024-01-02 23:03:04 +01:00
Conor McCarthy
cc43ef3bca
vkd3d: Pass int64 capability info to vkd3d-shader.
2024-01-02 23:03:00 +01:00
Zebediah Figura
6a514ebe8e
tests: Avoid using "SV_Position" as a name for the vertex shader input.
...
We use vkd3d_shader_find_signature_element() in the Vulkan runner, and
vkd3d-shader translates SM1 position to "POSITION".
2023-12-14 23:19:30 +01:00
Zebediah Figura
aa44f9b390
tests: Use struct vkd3d_shader_scan_signature_info to retrieve the VS input signature.
...
In order to allow retrieving it from d3dbc shaders.
2023-12-14 23:19:28 +01:00
Conor McCarthy
f23426ec32
tests/shader-runner: Check for int64 support in the Vulkan runner.
2023-12-14 21:00:41 +01:00
Conor McCarthy
a80ea8168f
tests/shader-runner: Check for float64 support in the Vulkan runner.
2023-12-14 21:00:39 +01:00
Conor McCarthy
cd43cb3752
tests/shader-runner: Check for float64 support in the d3d11 runner.
2023-12-14 21:00:38 +01:00
Giovanni Mascellani
09235d9e09
tests: Test assigning multisampled textures with different sample counts.
2023-12-13 22:32:38 +01:00
Conor McCarthy
af731024d7
tests/shader-runner: Fix the arithmetic-int-uniform int64 abs expected results.
2023-12-13 22:32:31 +01:00
Conor McCarthy
108941fce0
tests/shader-runner: Add 64-bit bitwise tests.
2023-12-12 22:50:52 +01:00
Conor McCarthy
27d4ccf225
tests/shader-runner: Add 64-bit arithmetic tests.
2023-12-12 22:50:51 +01:00
Conor McCarthy
8a1eb306e8
tests/shader-runner: Introduce a 'float64' requirement directive.
2023-12-12 22:50:50 +01:00
Conor McCarthy
95c48eb98e
tests/shader-runner: Introduce an 'int64' requirement directive.
2023-12-12 22:50:49 +01:00
Conor McCarthy
af86cdf713
tests/shader-runner: Add a non-const-indexing test for asfloat() result storage.
2023-12-11 23:18:54 +01:00
Conor McCarthy
3db7c2a62d
vkd3d-shader/dxil: Implement the DXIL STORE instruction.
2023-12-11 23:18:51 +01:00
Conor McCarthy
df82c61482
tests/shader-runner: Test an uninitialised indexable temp.
2023-12-11 23:18:49 +01:00
Stefan Dösinger
b0d1fb0bd7
tests: Show that CreatePipelineState also doesn't reuse duplicate objects.
2023-12-07 21:57:45 +01:00
Stefan Dösinger
1eaf7fa37b
tests: Show that compute pipeline state objects are not reused.
2023-12-07 21:57:45 +01:00
Stefan Dösinger
82a3209ee2
tests: Show that graphics pipeline state objects are not reused.
2023-12-07 21:57:45 +01:00
Stefan Dösinger
705cf10626
tests: Show that creating identical root signatures returns the same pointer.
2023-12-07 21:57:45 +01:00
Zebediah Figura
fcd6ec33bd
tests: Avoid shadowing "l" in test_get_copyable_footprints().
...
Found with -Wshadow.
2023-12-07 21:57:18 +01:00
Conor McCarthy
a33a9127ca
vkd3d-shader/dxil: Implement DX intrinsic Unary.
2023-12-07 21:56:53 +01:00
Conor McCarthy
16cb6fdbad
vkd3d-shader/spirv: Support constant initialisers in indexable temps.
2023-12-07 21:56:44 +01:00
Henri Verbeet
0c33f82f72
Release 1.10.
2023-12-06 15:31:21 +01:00
Francisco Casas
736f3ae2df
vkd3d-shader/hlsl: Use values at the time of the swizzle's load in copy-propagation.
...
This preempts us from replacing a swizzle incorrectly, as in the
following example:
1: A.x = 1.0
2: A
3: A.x = 2.0
4: @2.x
were @4 ends up being 2.0 instead of 1.0, because that's the value stored in
A.x at time 4, and we should be querying it at time 2.
This also helps us to avoid replacing a swizzle with itself in copy-prop
which can result in infinite loops, as with the included tests this commit.
Consider the following sequence of instructions:
1 : A
2 : B = @1
3 : B
4 : A = @3
5 : @1.x
Current copy-prop would replace 5 so it points to @3 now:
1 : A
2 : B = @1
3 : B
4 : A = @3
5 : @3.x
But in the next iteration it would make it point back to @1, keeping it
spinning infinitively.
The solution is to index the instructions and don't replace the swizzle
if the new load happens after the current load.
2023-11-29 22:53:24 +01:00
Francisco Casas
e6b7b38a29
tests: Test current failure when propagating swizzles.
...
The included test fails because copy_propagation_transform_swizzle()
is using the value recorded for the variable when the swizzle is being
read, and not the swizzle's load.
2023-11-29 22:53:16 +01:00
Zebediah Figura
d1ce069ea6
tests/shader_runner: Remove an unnecessary local variable declaration.
...
Found with -Wshadow.
2023-11-28 00:09:51 +01:00
Alistair Leslie-Hughes
5c134d44d6
include: D3D12_RT_FORMAT_ARRAY remove typedef to make header compatible with windows.
...
windows d3d12.idl doesn't have this as a typedef.
2023-11-28 00:09:20 +01:00
Giovanni Mascellani
f0a16d84ce
ci: Execute the shader runner on the correct test data on Windows.
2023-11-23 22:37:21 +01:00
Henri Verbeet
beb3f6e0c2
tests: Introduce an OpenGL shader runner.
2023-11-22 22:08:11 +01:00
Francisco Casas
4e1bf5e163
vkd3d-shader/hlsl: Discern between signed and unsigned ints when parsing.
2023-11-22 22:08:05 +01:00
Francisco Casas
1ee9e23e00
tests: Test overloads with signed and unsigned numeric values.
2023-11-22 22:08:05 +01:00
Francisco Casas
9a8f6e0edb
vkd3d-shader/hlsl: Parse integers with the 'u' postfix.
2023-11-22 22:08:04 +01:00
Francisco Casas
3f09cdcaa1
tests: Test integers with the 'u' postfix.
2023-11-22 22:08:04 +01:00
Conor McCarthy
eb05e434ff
vkd3d-shader/dxil: Implement the DXIL LOAD instruction.
2023-11-22 22:07:59 +01:00
Henri Verbeet
73c563ffb7
vkd3d-shader/d3dbc: Adjust the token count for DEF and DEFI instructions in shader_sm1_skip_opcode().
...
This was broken by commit e390bc35e2c9b0a2110370f916033eea2366317e; that
commit fixed the source count for these instructions, but didn't adjust
shader_sm1_skip_opcode(). Note that this only affects shader model 1;
later versions have a token count embedded in the initial opcode token.
2023-11-20 22:07:29 +01:00
Akihiro Sagawa
aed2d142cf
vkd3d-shader/hlsl: Add degrees() function.
2023-11-20 22:07:19 +01:00
Akihiro Sagawa
e493627130
vkd3d-shader/hlsl: Add radians() function.
2023-11-20 22:07:17 +01:00
Conor McCarthy
63b8972b0e
tests: Test CreatePipelineState().
...
Based on vkd3d-proton patches by Hans-Kristian Arntzen and Philip
Rebohle.
2023-11-15 21:48:44 +01:00
Conor McCarthy
3c4631a4d4
vkd3d-shader/dxil: Implement the DXIL VSELECT instruction.
2023-11-15 21:48:35 +01:00
Conor McCarthy
130e7bdf0f
tests/shader-runner: Add tests for 64-bit casts.
2023-11-15 21:48:33 +01:00
Conor McCarthy
38e85079aa
tests/shader-runner: Add a test for float comparisons.
2023-11-15 21:48:30 +01:00
Conor McCarthy
d957247c67
tests/shader-runner: Run d3d11 tests with a mimimum shader model of 4.0.
...
Passing less than 4.0 breaks the use of [require] with
'shader model < 4.0'.
2023-11-15 21:48:28 +01:00
Henri Verbeet
9de793f180
vkd3d-shader: Implement scanning combined resource/sampler information.
2023-11-13 23:19:23 +01:00
Nikolay Sivov
41a72a4eae
tests: Fix some spelling mistakes.
2023-11-13 23:19:14 +01:00
Conor McCarthy
d3b90cc877
vkd3d-shader/dxil: Implement the DXIL CMP2 instruction.
2023-11-10 20:23:50 +01:00
Zebediah Figura
514d179b70
vkd3d-shader/hlsl: Do not consider scalars and 1-dimensional vectors to be equivalent in function parameters.
2023-11-09 21:15:14 +01:00
Zebediah Figura
3e35570221
tests: Add some more tests for function overloads.
2023-11-09 21:15:08 +01:00
Conor McCarthy
90d178bf12
vkd3d-shader/dxil: Implement the DXIL CAST instruction.
2023-11-09 21:14:42 +01:00
Zebediah Figura
0805ce121e
tests: Add more semantics to test_nop_tessellation_shaders().
...
To act as a regression test for 852eefc01d
.
2023-11-08 22:49:51 +01:00
Nikolay Sivov
4778d051df
vkd3d-shader: Add constant folding for 'floor'.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-08 22:49:40 +01:00
Nikolay Sivov
494f681bf6
vkd3d-shader/tpf: Add support for ceil().
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-08 22:49:38 +01:00
Nikolay Sivov
e57bf3db0b
tests: Add some tests for ceil().
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-08 22:49:37 +01:00
Nikolay Sivov
522a0dfb56
vkd3d-shader/hlsl: Add tex2Dlod() function.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-08 22:49:26 +01:00
Francisco Casas
0ef25ad137
vkd3d-shader/tpf: Support relative addressing for indexable temps in SM4.
...
For relative addressing, the vkd3d_shader_registers must point to
another vkd3d_shader_src_param. For now, use the sm4_instruction to save
them, since the only purpose of this struct is to be used as paramter
for write_sm4_instruction.
2023-11-07 22:25:49 +01:00
Francisco Casas
915f9f1373
tests: Add aditional relative addressing tests.
2023-11-07 22:25:44 +01:00
Francisco Casas
3deb3b5a21
tests: Rename array-index-expr.shader_test as non-const-indexing.shader_test.
2023-11-07 22:25:42 +01:00
Conor McCarthy
749df8dec2
vkd3d-shader/dxil: Implement the DXIL BINOP instruction.
2023-11-06 23:09:03 +01:00
Conor McCarthy
7419f4e31d
vkd3d-shader/dxil: Allow empty struct types.
2023-11-02 18:23:12 +01:00
Nikolay Sivov
dbcc4c4e40
vkd3d-shader/hlsl: Parse empty technique declarations.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-02 18:23:07 +01:00
Nikolay Sivov
53b0101a53
vkd3d-shader/hlsl: Use case-insensitive match for the "technique" keyword.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-02 18:23:06 +01:00
Nikolay Sivov
ea8ff5394c
vkd3d-shader/hlsl: Add a keyword for fx_5_0 techniques.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-02 18:23:05 +01:00
Nikolay Sivov
c588f33822
tests: Add some tests for using technique blocks when compiling for pixel/vertex profiles.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-02 18:23:04 +01:00
Nikolay Sivov
ecdc3f39d4
vkd3d-shader: Accept 'loop' attribute, on loops.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-01 21:47:49 +01:00
Nikolay Sivov
26784672d8
vkd3d-shader: Check loop [unroll] attribute for conflict with other attributes.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-01 21:47:49 +01:00
Nikolay Sivov
b8047fd650
tests: Add some tests for loop attributes.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-11-01 21:47:49 +01:00
Giovanni Mascellani
c691ad8869
tests: Immediately transition buffers after creation in the shader runner.
...
The resource could be destructed before the command list left open
is executed; instead, we immediately perform the transition.
2023-11-01 21:47:44 +01:00
Giovanni Mascellani
46b7fccfd7
tests: Immediately transition textures after creation in the shader runner.
...
The resource could be destructed before the command list left open
is executed; instead, we immediately perform the transition.
2023-11-01 21:47:43 +01:00
Giovanni Mascellani
ca7fa0c015
tests: Immediately transition resources after readback in the shader runner.
...
The resource could be destructed before the command list left open
is executed; instead, we immediately perform the transition.
2023-11-01 21:47:41 +01:00
Conor McCarthy
589670180a
vkd3d-shader/dxil: Implement the DXIL EXTRACTVAL instruction.
2023-11-01 21:47:34 +01:00
Nikolay Sivov
8e5c8c1725
tests: Add some tests for 'technique' token behaviour.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-31 21:59:45 +01:00
Nikolay Sivov
214d44fb11
tests: Add [effect] section support.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-31 21:59:45 +01:00
Nikolay Sivov
ea554b91d7
tests: Remove unused parameter from mul() tests functions.
2023-10-31 21:59:29 +01:00
Francisco Casas
ab463f74bd
tests: Test array indexing with multiple swizzles.
2023-10-31 21:59:11 +01:00
Nikolay Sivov
bc2a4ee66a
vkd3d-shader/tpf: Write out 'switch' statements.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-31 21:59:05 +01:00
Nikolay Sivov
68c14079a6
vkd3d-shader/hlsl: Add a pass to normalize switch cases blocks.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-31 21:59:04 +01:00
Nikolay Sivov
72623031a2
vkd3d-shader/hlsl: Validate break/continue context.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-31 21:59:01 +01:00
Nikolay Sivov
ec8dfa467f
vkd3d-shader/hlsl: Add initial support for parsing 'switch' statements.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-31 21:58:57 +01:00
Nikolay Sivov
ebb5aacabf
tests: Add some tests for the 'switch' statements.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-31 21:58:57 +01:00
Giovanni Mascellani
f462d237c1
ci: Run shader tests on Windows.
2023-10-31 21:58:53 +01:00
Giovanni Mascellani
dbc5e7d07c
ci: Run cross tests on Windows.
...
A driver program is introduced to coordinate test running on Windows,
similarly to what "make test" does on Linux and macOS.
2023-10-31 21:58:51 +01:00
Henri Verbeet
f75bdd6e21
vkd3d-utils: Implement D3DStripShader().
2023-10-19 23:07:50 +02:00
Henri Verbeet
96556a8834
vkd3d-shader/hlsl: Add support for RWTexture2DArray.
2023-10-19 23:07:31 +02:00
Henri Verbeet
6fe781ff50
tests: Add basic RWTexture2DArray tests.
2023-10-19 23:07:31 +02:00
Henri Verbeet
2c71c18879
vkd3d-shader/hlsl: Add support for RWTexture1DArray.
2023-10-19 23:07:30 +02:00
Henri Verbeet
ae9d29a377
tests: Add basic RWTexture1DArray tests.
2023-10-19 23:07:29 +02:00
Henri Verbeet
b63c853688
vkd3d-utils: Implement D3DGetBlobPart().
...
This was largely adapted from Wine's d3dcompiler_43, with some style
adjustments.
2023-10-18 20:58:22 +02:00
Giovanni Mascellani
0dc40d7c1e
tests: Skip processing resources according to [require] directives.
2023-10-18 20:58:19 +02:00
Giovanni Mascellani
d69c04471e
tests: Do not test matrix majority on SM1-3.
...
I'm not sure of what's happening here, but it seems that this change
fixes a crash when running on Windows in the CI. Since most of the
test excludes SM1-3 anyway, this shouldn't be a big loss.
2023-10-18 20:58:18 +02:00
Giovanni Mascellani
ca51c359ec
tests: Fix the usage of require directives.
...
They are reset each time "[require]" is encountered.
2023-10-18 20:58:17 +02:00
Giovanni Mascellani
ead98ef329
tests: Remove an irrelevant input from a test.
...
The irrelevant input caused the test to fail on D3D12 for reasons
unrelated to the test's goal.
2023-10-18 20:58:16 +02:00
Giovanni Mascellani
671548494f
tests: Do not test integral types for SM1-3.
2023-10-18 20:58:16 +02:00
Giovanni Mascellani
90f9407b80
tests: Do not use global half values.
...
They are not allowed by the native compiler, except in compatibility
mode.
2023-10-18 20:58:14 +02:00
Henri Verbeet
803e5183cc
tests: Specify argument types for dxcompiler_create().
2023-10-17 22:18:36 +02:00
Henri Verbeet
47d4097efa
vkd3d-utils: Check for a NULL 'blob' pointer in D3DCreateBlob().
2023-10-16 22:36:58 +02:00
Giovanni Mascellani
eaf35c394d
tests: Skip test_atomic_instructions() on WARP.
...
Pipeline creation fails with E_INVALIDARG, atomics are likely not
supported on WARP.
2023-10-16 22:36:52 +02:00
Giovanni Mascellani
0d4a5f1860
tests: Skip test_unbounded_resource_arrays() on WARP.
...
Most reads on WARP are off by a few units. I haven't investigated
the reason.
2023-10-16 22:36:50 +02:00
Giovanni Mascellani
fe88dafdbd
tests: Skip test_execute_indirect() on WARP.
...
The device is eventually lost, indirect commands are likely not
supported on WARP.
2023-10-16 22:36:49 +02:00
Giovanni Mascellani
ee3c4b6555
tests: Skip test_get_copyable_footprints() on WARP.
...
There are 12025 failures with WARP. I haven't investigated them.
2023-10-16 22:36:47 +02:00
Giovanni Mascellani
d72e30f1d1
tests: Skip test_null_vbv() on WARP.
...
On WARP 0xffffffff is read instead of zero.
2023-10-16 22:36:45 +02:00
Giovanni Mascellani
14c9be697f
tests: Acknowledge some double operations being broken on WARP.
2023-10-16 22:36:45 +02:00
Giovanni Mascellani
3f87cf9d7f
tests: Acknowledge WARP giving a GPU handle to a non-shader-visible descriptor heap.
...
WARP has no GPU, so it probably treats GPU handles just like CPU handles.
2023-10-16 22:36:43 +02:00
Giovanni Mascellani
862dcf27a6
tests: Acknowledge WARP accepting some unusual CreateCommittedResource() configuration.
...
A software implementation can conceivably satisfy some requests that
cannot work on real hardware.
2023-10-16 22:36:41 +02:00
Conor McCarthy
e0d0a04b79
vkd3d-shader/dxil: Handle multi-row signature elements.
2023-10-16 22:36:38 +02:00
Henri Verbeet
e53178f395
tests: Use the same viewport origin and front-face orientation in the Vulkan and D3D runners.
...
I.e., top-left origin, and clockwise front-facing. These end up cancelling
each other out when drawing full-screen quads, but that's not necessarily true
for other geometry.
2023-10-16 22:36:22 +02:00
Giovanni Mascellani
c1de65a99b
tests: Fail if dxcompiler is not available at runtime.
2023-10-16 22:36:17 +02:00
Conor McCarthy
57280673e5
tests/shader-runner: Test shaders with dxcompiler.
...
The location of dxcompiler should be set during configuration with
'DXCOMPILER_LIBS=-L/path/to/dxcompiler', and then at runtime with
LD_LIBRARY_PATH, WINEPATH or PATH as applicable.
A new 'fail(sm<6)' decoration is needed on many shader declarations
because dxcompiler succeeds on many shaders which fail with fxc. The
opposite case is less common and is flagged with 'fail(sm>=6)'. A few
tests cause dxcompiler to crash or hang, so these are avoided using
[require], which now skips tests until reset instead of exiting. Also,
'todo(sm<6)' and 'todo(sm>=6)' are used to separate checking of results.
2023-10-11 22:21:14 +02:00
Conor McCarthy
d211160b89
tests/shader-runner: Replace immediate shader type strings with an enum.
2023-10-11 22:21:14 +02:00
Conor McCarthy
0ef0735999
tests/shader-runner: Do not exit if a 'require' directive is not met.
...
Tests are skipped until the next 'require' directive, which restores
the defaults before the new requirements are read.
2023-10-11 22:21:14 +02:00
Conor McCarthy
192f4dcb2b
tests/shader-runner: Handle individual keywords in shader directives.
...
Matching all possible combinations of keywords becomes too complex
if more keywords are added.
2023-10-11 22:21:14 +02:00
Nikolay Sivov
9c6c7cb78f
vkd3d: Add partial implementation for CreateCommittedResource1().
2023-10-10 22:11:46 +02:00
Nikolay Sivov
8479ceedfc
vkd3d-shader/hlsl: Propagate structure fields modifiers when copying shader inputs.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-09 21:58:29 +02:00
Nikolay Sivov
1930b51d97
vkd3d-shader/hlsl: Allow interpolation modifiers on structure fields.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-09 21:58:27 +02:00
Nikolay Sivov
de860c3cbf
vkd3d-shader/hlsl: Parse 'centroid' and 'noperspective' modifiers.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-09 21:58:24 +02:00
Nikolay Sivov
4b8a4809d1
tests: Add a test for interpolation modifiers specified on structure fields.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-09 21:58:24 +02:00
Nikolay Sivov
c5414fa92f
vkd3d-shader/tpf: Write 'continue' instruction.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-09 21:58:17 +02:00
Nikolay Sivov
0e5749e78e
vkd3d-shader/hlsl: Allow 'break' instructions in loops.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-09 21:58:12 +02:00
Nikolay Sivov
89f493b900
tests: Add some tests for 'break'/'continue' in loops.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-09 21:58:12 +02:00
Nikolay Sivov
6ba75fd92f
vkd3d: Add partial implementation for CreateHeap1().
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-09 21:58:07 +02:00
Nikolay Sivov
7c378cc6f9
vkd3d-shader/hlsl: Remove conditional branching when condition is a compile time constant.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-05 16:16:09 +02:00
Nikolay Sivov
8ebccad3c9
vkd3d-shader/hlsl: Add constant folding for rshift.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-05 16:15:54 +02:00
Nikolay Sivov
6e74819eb7
vkd3d-shader/hlsl: Add constant folding for lshift.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-05 16:15:52 +02:00
Francisco Casas
e64e08b2b7
tests: Test register reservations on structs for SM5.
2023-10-05 16:15:30 +02:00
Nikolay Sivov
b5c0c9c22f
vkd3d-shader/hlsl: Add fwidth() function.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-10-05 16:15:10 +02:00
Conor McCarthy
39be40ce94
tests: Destroy the test context in test_readback_map_stability().
2023-10-02 22:25:10 +02:00
Henri Verbeet
5503a025d9
tests: Add some missing vkd3d_test_pop_context() calls to test_shader_instructions().
2023-09-28 23:13:04 +02:00
Giovanni Mascellani
4374d45655
tests: Work around a MoltenVK bug in test_tgsm().
2023-09-26 22:07:43 +02:00
Petrichor Park
976fd67f51
vkd3d-shader/hlsl: Implement intrinsic tan.
...
This commit also extends the trigonometry tests a little bit to make
sure that tan works right.
2023-09-25 22:07:13 +02:00
Giovanni Mascellani
ca05e57e67
tests: Mark a bug as resolved on Mesa.
2023-09-22 11:06:57 +02:00
Giovanni Mascellani
d640b213b2
tests: Do not crash if the render target doesn't support MSAA 8.
...
This currently happens on MoltenVK.
2023-09-22 11:06:50 +02:00
Giovanni Mascellani
6dfdbb5c26
tests: Do not crash if a pipeline statistics query heap cannot be created.
...
This currently happens on MoltenVK.
2023-09-22 11:06:44 +02:00
Giovanni Mascellani
d742770499
tests: Compile HLSL shaders at runtime in test_draw_depth_only().
2023-09-22 11:06:41 +02:00
Giovanni Mascellani
4557ad36b0
tests: Compile HLSL shaders at runtime in test_draw_depth_no_ps().
2023-09-22 11:06:41 +02:00
Giovanni Mascellani
b7c951ba78
tests: Compile HLSL shaders at runtime in test_scissor().
2023-09-22 11:06:41 +02:00
Giovanni Mascellani
15c5ef5bb5
tests: Compile HLSL shaders at runtime in test_fractional_viewports().
2023-09-22 11:06:40 +02:00
Giovanni Mascellani
49bbd98a04
vkd3d-shader/hlsl: Correctly fold casts from float.
...
I.e., without invoking undefined behavior in the compiler. The rules
are desumed from the the MSDN documentation for ftoi and ftou.
2023-09-22 11:06:28 +02:00
Nikolay Sivov
6d1ba83856
vkd3d-shader/hlsl: Use conditional moves for arithmetic operators instead of branching.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-09-22 11:06:22 +02:00
Zebediah Figura
9417c7cfb7
vkd3d-shader/d3dbc: Translate sm1 fragment outputs to system values.
2023-09-21 19:16:31 +02:00
Zebediah Figura
1615e5a76b
vkd3d-shader/dxbc: Map sm4 fragment outputs to system values based on their name.
2023-09-21 19:16:29 +02:00
Henri Verbeet
419c6364db
tests: Add a small test for vkd3d_shader_build_varying_map().
...
There's probably room for improvement, but this at least verifies the
function can be called.
2023-09-19 21:30:37 +02:00
Giovanni Mascellani
b8f2c3e1f4
tests: Relax the precision of some tests so that they pass on MoltenVK.
2023-09-18 21:04:06 +02:00
Nikolay Sivov
177ea3bcbd
vkd3d-shader/hlsl: Produce 2D resource declarations and loads for tex1D().
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-09-13 23:11:11 +02:00
Giovanni Mascellani
61b403a032
tests: Compile HLSL shaders at runtime in test_unknown_dsv_format().
2023-09-13 23:11:04 +02:00
Giovanni Mascellani
264ff9e2da
tests: Compile HLSL shaders at runtime in test_unknown_rtv_format().
2023-09-13 23:11:04 +02:00
Giovanni Mascellani
b1cae0dd1e
tests: Compile HLSL shaders at runtime in test_multiple_render_targets().
2023-09-13 23:11:04 +02:00
Giovanni Mascellani
f7354ff9e3
tests: Compile HLSL shaders at runtime in test_create_compute_pipeline_state().
2023-09-13 23:11:04 +02:00
Zebediah Figura
e847df9528
tests: Check the result of vkCreateGraphicsPipelines().
2023-09-13 23:10:46 +02:00
Francisco Casas
39563aa5b3
vkd3d-shader/hlsl: Lower matrix swizzles.
2023-09-13 23:10:38 +02:00
Francisco Casas
60a3279318
tests: Test matrix swizzles.
2023-09-13 23:10:37 +02:00
Nikolay Sivov
cab1f57e01
tests: Add a test for fmod() with vector arguments.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-09-07 19:15:26 +02:00
Nikolay Sivov
1002a6b357
vkd3d-shader/tpf: Use 'movc' to implement ternary operator.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-09-07 19:15:25 +02:00
Nikolay Sivov
c5d680d141
vkd3d-shader/hlsl: Add tex1D() function.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-09-07 19:15:06 +02:00
Zebediah Figura
a597dc8755
vkd3d-shader/hlsl: Define lit() in HLSL.
2023-08-30 22:49:03 +02:00
Nikolay Sivov
c39c5b3907
vkd3d-shader/hlsl: Add texCUBE() function.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-29 22:07:56 +02:00
Nikolay Sivov
269747dbf3
tests: Enable compiler backwards compatibility mode only for shaders that require it.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-28 20:40:06 +02:00
Nikolay Sivov
18c1477464
vkd3d-shader/hlsl: Ignore 'inline' modifier for functions.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-28 20:39:53 +02:00
Nikolay Sivov
30be83f911
tests: Add some 'inline' function modifier tests.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-28 20:39:53 +02:00
Evan Tang
f374934281
tests: Test CopyResource depth to color.
2023-08-24 21:43:59 +02:00
Nikolay Sivov
1153f6bb34
vkd3d-shader/hlsl: Parse "if" statement attributes.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-24 21:43:49 +02:00
Nikolay Sivov
9605993af3
tests: Add some tests for "if" statement attributes.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-24 21:43:49 +02:00
Zebediah Figura
926575a6f3
vkd3d-shader/hlsl: Force sm1 inputs to be 4-component only for vertex shaders.
...
Pixel shaders still have an appropriate writemask.
2023-08-24 21:43:44 +02:00
Nikolay Sivov
4f2e07a45d
vkd3d-shader/hlsl: Allow 'const' modifier without initializer in the global scope.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-15 21:51:50 +02:00
Nikolay Sivov
7fd10bb6bc
tests: Add some tests for a 'const' modifier.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-15 21:51:50 +02:00
Francisco Casas
37cfbe47d7
vkd3d-shader/hlsl: Sort synthetic separated samplers first for SM4.
2023-08-15 21:51:31 +02:00
Francisco Casas
948c4145f5
tests: Test texture allocation ordering in complex scenarios.
2023-08-15 21:51:26 +02:00
Nikolay Sivov
25ff56769b
vkd3d-shader: Add constant folding for the 'dot' operation.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-08-14 18:38:15 +02:00
Zebediah Figura
bad72d1874
vkd3d-shader/d3dbc: Make sure all inter-stage varyings have a unique register index.
...
spirv will need this.
2023-08-03 21:20:22 +09:00
Zebediah Figura
b4bb3931c5
vkd3d-shader/preproc: Append spaces between tokens in macro invocations.
2023-08-02 20:19:21 +09:00
Zebediah Figura
250a24bd3f
vkd3d-shader/preproc: Strip whitespace when stringifying.
2023-08-02 20:19:20 +09:00
Zebediah Figura
6fc3ae2b5c
vkd3d-shader/preproc: Stringify text immediately in macro invocations.
2023-08-02 20:19:19 +09:00
Zebediah Figura
3a235b57f6
vkd3d-shader/preproc: Expand macro arguments in macro invocations.
...
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=55361
2023-08-02 20:19:17 +09:00
Zebediah Figura
9b98489155
vkd3d-shader/preproc: Parse hash marks as two separate tokens when not in stringification contexts.
2023-08-02 20:19:15 +09:00
Conor McCarthy
1e178efa01
tests/d3d12: Add tests for GetResourceTiling().
...
Based on vkd3d-proton patches by Philip Rebohle and
Hans-Kristian Arntzen.
2023-07-31 21:07:56 +09:00
Nikolay Sivov
bfdd5c142d
vkd3d-shader/tpf: Add support for writing 'resinfo' instruction.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-07-31 21:07:50 +09:00
Nikolay Sivov
18731d71a6
tests: Add some tests for GetDimensions().
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-07-31 21:07:46 +09:00
Nikolay Sivov
0b77b5f99e
tests: Add some tests for matrix packing compiler options.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-07-24 22:41:10 +02:00
Nikolay Sivov
01faf6ad9e
tests: Add test file syntax to specify compiler options.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-07-24 22:41:09 +02:00
Conor McCarthy
31ff1fa9b6
tests: Test releasing the command signature immediately after use.
...
D3D12 docs are silent on a required lifetime and immediate release
works in Windows.
2023-07-24 22:40:54 +02:00
Conor McCarthy
9014183100
vkd3d: Return a null handle from GetGPUDescriptorHandleForHeapStart() for non-shader-visible heaps.
2023-07-20 22:33:17 +02:00
Conor McCarthy
981034e6e4
tests: Test GetGPUDescriptorHandleForHeapStart() on a non-shader-visible heap.
2023-07-20 22:33:07 +02:00
Zebediah Figura
d077562f79
vkd3d-shader/d3dbc: Scan descriptors for constant register sets.
2023-07-17 22:56:39 +02:00
Nikolay Sivov
a18ace731d
tests: Add a test for side effects of ternary operator.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-07-17 22:56:32 +02:00
Zebediah Figura
a55973d695
vkd3d-shader/hlsl: Lower combined samplers to separate sampler and texture objects for SM4.
...
Co-authored-by: Francisco Casas <fcasas@codeweavers.com>
2023-07-17 22:55:51 +02:00
Francisco Casas
b8a85c6ad5
tests: Add lowering combined samplers tests.
2023-07-17 22:55:43 +02:00
Francisco Casas
ab37b27a7d
tests: Pass D3DCOMPILE_ENABLE_BACKWARDS_COMPATIBILITY when compiling with the shader-runner.
2023-07-17 22:55:43 +02:00
Francisco Casas
c58d666d1b
vkd3d-shader/hlsl: Handle resource components individually for SM 5.0.
2023-07-17 22:55:40 +02:00
Zebediah Figura
d4b5e79c8b
vkd3d-shader/hlsl: Skip unallocated variables when looking for reservation conflicts.
2023-07-13 23:00:03 +02:00
Nikolay Sivov
06040d2a30
vkd3d-shader/hlsl: Disallow certain instruction types from constant expressions.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-07-04 22:39:57 +02:00
Nikolay Sivov
a65c0b0e22
vkd3d-shader/hlsl: Support evaluated expressions for sample count in multisampled textures declarations.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-07-04 22:39:55 +02:00
Francisco Casas
01800942a9
vkd3d-shader/hlsl: Declare vars individually when parsing struct declarations.
...
A struct declaration with variables is now absorbed into the 'declaration'
rule, like any other variable declaration.
A struct declaration without variables is now reduced to the
'struct_declaration_without_vars' rule.
They both are reduced to a 'declaration_statement' in the end.
2023-07-04 22:39:24 +02:00
Francisco Casas
62c891b796
vkd3d-shader/hlsl: Declare vars individually when parsing regular declarations.
...
In a declaration with multiple variables, the variables must be created
before the initializer of the next variable is parsed. This is required
for initializers such as:
float a = 1, b = a, c = b + 1;
A requisite for this is that the type information is parsed in the same
rule as the first variable (as a variable_def_typed) so it is
immediately available to declare the first variable. Then, the next
untyped variable declaration is parsed, and the type from the first
variable can be used to declare the second, before the third is parsed,
and so on.
2023-07-04 22:39:21 +02:00
Francisco Casas
396edae281
tests: Test multiple variable initializers.
2023-07-04 22:39:18 +02:00
Francisco Casas
d8e6a1066d
tests: Test semantics in uniform variables.
2023-07-04 22:39:18 +02:00
Francisco Casas
e4d94d955c
vkd3d-shader/hlsl: Support fine derivates.
2023-07-04 22:39:12 +02:00
Francisco Casas
ff31284f8d
vkd3d-shader/hlsl: Support coarse derivates.
2023-07-04 22:39:10 +02:00
Francisco Casas
dc84afe73a
tests: Quantize regular and coarse derivate test results.
...
Co-authored-by: Giovanni Mascellani <gmascellani@codeweavers.com>
2023-07-04 22:39:07 +02:00
Francisco Casas
f0584cad62
tests: Make ddx() and ddy() test behave correctly for shader models < 4.
2023-07-04 22:39:07 +02:00
Francisco Casas
62e9b86697
tests: Test coarse and fine derivates.
...
Co-authored-by: Giovanni Mascellani <gmascellani@codeweavers.com>
2023-07-04 22:39:04 +02:00
Zebediah Figura
0d2f2e1860
tests: Move HLSL tests to a subdirectory.
2023-06-28 21:40:32 +02:00
Nikolay Sivov
3aee386e2f
tests: Add another test for register reservation.
2023-06-27 22:34:42 +02:00
Zebediah Figura
69ecfdfb0b
tests: Use compare_uint() in compare_float().
...
Comparing the result of abs() is broken in the case that x - y == INT_MIN.
2023-06-27 22:34:37 +02:00
Nikolay Sivov
861078d63a
vkd3d-shader/hlsl: Handle 'texkill' discard type for sm4+.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-06-27 22:33:50 +02:00
Nikolay Sivov
6ef0213135
tests: Add some tests for clip().
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-06-27 22:33:48 +02:00
Zebediah Figura
7e1fcdca89
vkd3d-shader: Synthesize signatures for d3dbc shaders.
2023-06-27 22:33:41 +02:00
Zebediah Figura
20190a1388
vkd3d-shader: Introduce an API to retrieve all signatures from DXBC shaders.
2023-06-27 22:33:41 +02:00
Nikolay Sivov
c8ffe8e1a8
vkd3d-shader/hlsl: Don't report a register type mismatch for unused reserved variables.
2023-06-22 22:00:19 +02:00
Zebediah Figura
d6ac823dd6
vkd3d-shader/hlsl: Don't set "allocated" for unused reserved variables.
2023-06-22 22:00:17 +02:00
Nikolay Sivov
883ab880e3
tests: Add more tests for unused registers with a reservation.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-06-22 22:00:16 +02:00
Nikolay Sivov
d856be0519
vkd3d-shader/hlsl: Handle static constants in array size expressions.
2023-06-12 22:50:12 +02:00
Nikolay Sivov
38c89442ac
tests: Add a test for array size expressions using static constants.
2023-06-12 22:50:12 +02:00
Francisco Casas
ebf7573571
vkd3d-shader/hlsl: Support non-constant vector indexing.
...
Non-constant vector indexing is not solved with relative addressing
in the register indexes because this indexation cannot be at the level
of register-components.
Mathematical operations must be used instead.
2023-06-07 20:48:59 +02:00
Francisco Casas
f24598c9a0
tests: Test indexing temps.
2023-06-07 20:48:57 +02:00
Francisco Casas
8d7cc8c84e
tests: Test non-constant vector indexing.
2023-06-07 20:48:55 +02:00
Ethan Lee
aa17d139be
tests: Add a test for arrays with an expression as the index.
...
Currently, the compiler requires that dereferences be HLSL_IR_CONSTANT, so that
it can compute the offset at compile time. However, scenarios such as this test
will produce a dereference with HLSL_IR_EXPR, which will generate an error.
Passing this test in particular will require adding support for SM4 relative
addressing, as well as support for non-constant indexing in general.
Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
2023-05-29 20:21:01 +02:00
Ethan Lee
ea7d8c65bd
vkd3d-shader/tpf: Add support for emitting sample_l instructions.
...
Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
2023-05-24 22:00:41 +02:00
Conor McCarthy
6835e8176f
vkd3d-shader/ir: Normalise signatures and input/output registers to the Shader Model 6 pattern.
...
In Shader Model 6 each signature element can span a range of register
indices, or 'rows', and system values do not share a register index with
non-system values. Inputs and outputs are referenced by element index
instead of register index. This patch merges multiple signature elements
into a single element under the following conditions:
- The register index in a load or store is specified dynamically by
including a relative address parameter with a base register index. The
dcl_index_range instruction is used to identify these.
- A register declaration is split across multiple elements which declare
different components of the register.
- A patch constant function writes tessellation factors. These are an
array in SPIR-V, but in SM 5.x each factor is declared as a separate
register, and these are dynamically indexed by the fork/join instance
id. Elimination of multiple fork/join phases converts the indices to
constants, but merging the signature elements into a single arrayed
element matches the SPIR-V output.
All references to input/output register indices are converted to element
indices. If a relative address is present, the element index is moved up
a slot so it cannot be confused with a constant offset. Existing code
only handles register index relative addressing for tessellation factors.
This patch adds generic support for it.
2023-05-24 22:00:29 +02:00
Francisco Casas
e060773c19
vkd3d-shader/hlsl: Extend the liveness of nodes produced outside loops.
...
Otherwise, it is possible that the register used by the temp is
overridden by a subsequent instruction within the same loop.
2023-05-24 22:00:21 +02:00
Francisco Casas
fbd2df2ad5
tests: Add minimal tests for temp lifetimes within a loop.
2023-05-24 22:00:19 +02:00
Ethan Lee
24d4ab7fb3
vkd3d-shader/hlsl: Add support for SampleGrad() method.
...
Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
2023-05-23 21:07:49 +02:00
Ethan Lee
c3f10fe271
tests: Add a test for SampleGrad() method.
...
Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
2023-05-23 21:07:47 +02:00
Nikolay Sivov
1af662ae50
tests: Add RWBuffer writing test.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-05-22 22:03:36 +02:00
Zebediah Figura
66dab357eb
tests: Add support for UAV buffers in the d3d11 runner.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-05-22 22:03:36 +02:00
Nikolay Sivov
f470c00453
tests: Add support for UAV buffers to d3d12 runner.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-05-22 22:03:36 +02:00
Nikolay Sivov
74c0ad0a7a
tests: Rename readback helper to be more generic.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-05-22 22:03:28 +02:00
Nikolay Sivov
a4ebde202a
tests: Add support for UAV buffers in Vulkan runner.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-05-22 22:03:28 +02:00
Nikolay Sivov
cf8cacd336
vkd3d-shader/hlsl: Improve UAV format type checking for buffer types.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2023-05-22 22:03:27 +02:00
Nikolay Sivov
dfa0076473
vkd3d-shader/hlsl: Add support for sample index argument in Load().
2023-05-22 22:03:12 +02:00
Nikolay Sivov
dc41444941
vkd3d-shader/hlsl: Convert ternary operator true/false values to a common type.
2023-05-09 21:51:46 +02:00
Nikolay Sivov
a064009d3b
tests: Simplify conditional test.
2023-05-09 21:51:46 +02:00
Zebediah Figura
6129399b4f
tests: Add a test for SampleBias() with multiple mipmap levels.
2023-05-08 20:24:15 +02:00