Line tessellation factors use two different DXBC semantics that
both map to the same SPIR-V built-in. In this case, we cannot
rely on the semantic index.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Private variables are always vec4, so using a sparse write mask here
will lead to invalid code being generated when accessing the variable.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Fork and join phases in hull shaders allow dynamic indexing for
all output registers, not just the tessellation factor built-ins.
Moreover, the patch constant output register space is shared with
join phases, which can read back the outputs computed in the fork
phases, also allowing dynamic indexing.
In order to support this in a not overly complex way, use a private
array representing the entire patch constant space, and use epilogue
functions to assign them to the actual output variables.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Needed to support dynamically indexed output arrays.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Otherwise, if a private variable is used for the given output,
vkd3d_dxbc_compiler_emit_store_shader_output will write to the
private variable again instead of the actual output, and some
outputs may never be emitted. This is common in hull shaders.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The GPU VA allocator was allocating memory in a way where dereferencing
GPU VA required a lock + bsearch() to find the right VA range.
Rather than going this route, we turn the common case into O(1) and
lock-free by creating a slab allocator which allows us to lookup a
pointer directly from a GPU VA with (VA - Base) / PageSize.
The number of allocations in the fast path must be limited since we
cannot trivially grow the allocator while remaining lock-free for
dereferences.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
If separate transitions of the depth and stencil plane occur in the
same array of barriers, they will be consolidated into one Vulkan
layout transition. This can only be supported for combinations of
depth read and depth write states, or identical states.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Fixes an assertion when compiling shaders with more than four
clip or cull distances. Output arrays are arrays of scalars,
so shifting the write mask is not very meaningful.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
There appears to be a complete implementation of RS 1.1 already,
so enable this feature.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Even if the shader doesn't explicitly declare it.
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
By setting this flag, command pools cannot efficiently pool allocations.
This flag should be set to 0 so only the VkCommandPool may be reset.
This matches D3D12 API.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
D3D12 command allocators are intended to recycle memory across resets,
so we should do the same thing in vkd3d.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
It is possible to map a resource, but not disclose the VA to caller.
This is used for WriteToSubresource.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Shadow of the Tomb Raider overwrites descriptors while they are being
copied in another thread. This patch makes reads and writes atomic for
CBV, SRV, UAV, and sampler descriptors, but not RTV and DSV, for which
copying is not implemented.
Benchmark total frames vs mutex count (the single mutex was locked
only once for copying):
1 mutex: 6480 6489 6503
8 mutexes: 6691 6693 6661
16 mutexes: 6665 6682 6703
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Device is removed after CreateUnorderedAccessView().
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Enables ReadFromSubresource() to succeed in cases where it would have
failed otherwise.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The "allocations" array is filled with unused entries when D3D12 buffers
are destroyed. The majority of entries might be unused after running for
a while. Remove the entry when VA is freed in order to prevent
accumulation of unused entries. This makes destroying D3D12 buffers more
expensive.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Order of structures doesn't matter so we can simply prepend instead of
apending.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Use true and false instead.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
