## Summary
- Closes#730
**What is the goal of this PR?**
- Adds percentage-based value support to CSS properties that accept
percentages (padding, margin, text-indent)
**What changes are included?**
- Adds `Percent` as another CSS unit
- Passes the viewport width to `fromCssStyle` so that we can resolve
percentage-based values
- Adds a fallback of using an emspace for text-indent if we have an
unresolvable value for whatever reason
## Additional Context
- This was missed in my CSS support feature, and the fallback when we
encounter a percentage value is to use px instead. This means 5% (which
would be ~30px on the screen) turns into 5px. When percentages are used
in `text-indent`, this fallback behavior makes the indent look like a
single space character. Whoops! 😬
My test EPUB has been updated
[here](https://github.com/jdk2pq/css-test-epub) with percentage based
CSS values at the end of the book.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_, Claude Code
## Summary
* Allow OTA update from RC build to full release
* If all the segments match, then also check if the current version
contains "-rc"
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
**What is the goal of this PR?**
- Just a simple rename after feedback in #738
**What changes are included?**
- Renamed "Embedded Style" to "Book's Embedded Style" to more clearly
associate it with "Book's Style" option in "Paragraph Alignment"
settings
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Ref https://github.com/crosspoint-reader/crosspoint-reader/pull/737
This PR further reduce ~25ms from rendering time, testing inside the
Setting screen:
```
master:
[68440] [GFX] Time = 73 ms from clearScreen to displayBuffer
PR:
[97806] [GFX] Time = 47 ms from clearScreen to displayBuffer
```
And in extreme case (fill the entire screen with black or gray color):
```
master:
[1125] [ ] Test fillRectDither drawn in 327 ms
[1347] [ ] Test fillRect drawn in 222 ms
PR:
[1334] [ ] Test fillRectDither drawn in 225 ms
[1455] [ ] Test fillRect drawn in 121 ms
```
Note that
https://github.com/crosspoint-reader/crosspoint-reader/pull/737 is NOT
applied on top of this PR. But with 2 of them combined, it should reduce
from 47ms --> 42ms
## Details
This PR based on the fact that function calls are costly if the function
is small enough. For example, this simple call:
```
int rotatedX = 0;
int rotatedY = 0;
rotateCoordinates(x, y, &rotatedX, &rotatedY);
```
Generated assembly code:
<img width="771" height="215" alt="image"
src="https://github.com/user-attachments/assets/37991659-3304-41c3-a3b2-fb967da53f82"
/>
This adds ~10 instructions just to prepare the registers prior to the
function call, plus some more instructions for the function's
epilogue/prologue. Inlining it removing all of these:
<img width="1471" height="832" alt="image"
src="https://github.com/user-attachments/assets/b67a22ee-93ba-4017-88ed-c973e28ec914"
/>
Of course, this optimization is not magic. It's only beneficial under 3
conditions:
- The function is small, not in size, but in terms of effective
instructions. For example, the `rotateCoordinates` is simply a jump
table, where each branch is just 3-4 inst
- The function has multiple input arguments, which requires some move to
put it onto the correct place
- The function is called very frequently (i.e. critical path)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
## Summary
Fix for the page skip issue detected
https://github.com/crosspoint-reader/crosspoint-reader/pull/700#issuecomment-3856374323
by user @whyte-j
Skipping down on the last page now skips to the last item, and up on the
first page to the first item, rather than wrapping around the list in a
weird way.
## Additional Context
The calculation was outdated after several changes were added afterwards
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
This PR optimizes the `fillRectDither` function, making it as fast as a
normal `fillRect`
Testing code:
```cpp
{
auto start_t = millis();
renderer.fillRectDither(0, 0, renderer.getScreenWidth(), renderer.getScreenHeight(), Color::LightGray);
auto elapsed = millis() - start_t;
Serial.printf("[%lu] [ ] Test fillRectDither drawn in %lu ms\n", millis(), elapsed);
}
{
auto start_t = millis();
renderer.fillRect(0, 0, renderer.getScreenWidth(), renderer.getScreenHeight(), true);
auto elapsed = millis() - start_t;
Serial.printf("[%lu] [ ] Test fillRect drawn in %lu ms\n", millis(), elapsed);
}
```
Before:
```
[1125] [ ] Test fillRectDither drawn in 327 ms
[1347] [ ] Test fillRect drawn in 222 ms
```
After:
```
[1065] [ ] Test fillRectDither drawn in 238 ms
[1287] [ ] Test fillRect drawn in 222 ms
```
## Visual validation
Before:
<img width="415" height="216" alt="Screenshot 2026-02-07 at 01 04 19"
src="https://github.com/user-attachments/assets/5802dbba-187b-4d2b-a359-1318d3932d38"
/>
After:
<img width="420" height="191" alt="Screenshot 2026-02-07 at 01 36 30"
src="https://github.com/user-attachments/assets/3c3c8e14-3f3a-4205-be78-6ed771dcddf4"
/>
## Details
The original version is quite slow because it does quite a lot of
computations. A single pixel needs around 20 instructions just to know
if it's black or white:
<img width="1170" height="693" alt="Screenshot 2026-02-07 at 00 15 54"
src="https://github.com/user-attachments/assets/7c5a55e7-0598-4340-8b7b-17307d7921cb"
/>
With the new, templated and more light-weight approach, each pixel takes
only 3-4 instructions, the modulo operator is translated into bitwise
ops:
<img width="1175" height="682" alt="Screenshot 2026-02-07 at 01 47 51"
src="https://github.com/user-attachments/assets/4ec2cf74-6cc0-4b5b-87d5-831563ef164f"
/>
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
Closes#182. Closes#710. Closes#711.
## Summary
**What is the goal of this PR?**
- A longer-term, more robust fix for the issue with spurious spaces
appearing after style changes. Replaces solution from #694.
**What changes are included?**
- Add continuation flags to determine if to add a space after a word or
if the word connects to the previous word. Replaces simple solution that
only considered ending punctuation.
- Fixed an issue with greedy line-breaking algorithm where punctuation
could appear on the next line, separated from the word, if there was a
style change between the word and punctuation
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_, Claude Code
## Summary
Reduce/fix the lag on the home screen before recent book covers are
rendered
## Additional Context
We were previously rendering the screen in two steps, delaying the
recent book covers render to avoid a lag before the screen loads.
In this PR, we are now doing that only if at least one book doesn't have
the cover thumbnail generated yet. If all thumbs are already generated,
we load and display them right away, with no lag.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO **_
Closes#712
## Summary
**What is the goal of this PR?**
- To add new settings for toggling on/off embedded CSS styles in the
reader. This gives more control and customization to the user over how
the ereader experience looks.
**What changes are included?**
- Added new "Embedded Style" option to the Reader settings
- Added new "Book's Style" option for "Paragraph Alignment"
- User's selected "Paragraph Alignment" will take precedence and
override the embedded CSS `text-align` property, _unless_ the user has
"Book's Style" set as their "Paragraph Alignment"
## Additional Context
https://github.com/user-attachments/assets/9e404b13-c7e0-41c7-9406-4715f389166a
Addresses feedback from the community about the new CSS feature:
https://github.com/crosspoint-reader/crosspoint-reader/pull/700
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_, Claude Code
## Summary
* Direct swap of X with new logo for boot and sleep screens
* More to be done here in the future to make these screens look a little
nicer
## Additional Context
* The design comes straight from @lepislepis -
https://github.com/crosspoint-reader/crosspoint-reader/discussions/396#discussioncomment-15590508
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**No
## Summary
This pull request introduces a new "Chapter Progress Bar" mode to the
status bar, allowing users to track their progress within the current
chapter in addition to the existing book-level progress options. It also
unifies and increases the progress bar height for better visibility, and
updates the settings UI to support the new mode.
Closes#636
**Status Bar/Progress Bar Enhancements:**
* Added a new `CHAPTER_PROGRESS_BAR` mode to
`CrossPointSettings::STATUS_BAR_MODE`, and updated the settings UI to
allow users to select this mode.
[[1]](diffhunk://#diff-3af36372bb6233a83387a68091b5e0651c23585c7c0a95669ed893268ca709a8R34)
[[2]](diffhunk://#diff-c55df9ec3ade843be000ba463cb75aa3df27dc34620a56c248fc4cc4e917b34bL22-R23)
* Implemented `drawChapterProgressBar` in `ScreenComponents` and
integrated it into both EPUB and TXT reader activities, so the chapter
progress bar is displayed when the new mode is selected.
[[1]](diffhunk://#diff-be271778a942f7fab0d920acd73442512346ff811a4625c011275a7ca6be3a3eL51-R64)
[[2]](diffhunk://#diff-dd410cab3a363d78172706d2ad6591f327e9b5b05f314db405db31a667af03faL16-R20)
[[3]](diffhunk://#diff-82798dedbe135495e619d4aa27a4bef560c70c7663cf43148b67a26ddde45682R518-R525)
[[4]](diffhunk://#diff-471ba9d9eb65b1a8451d41246db2aa695a42ea4ae4762163adfda4c20fec0950R563-R567)
* Updated logic in EPUB and TXT reader activities to show the correct
progress bar, progress text, and battery indicator based on the selected
status bar mode, including the new chapter progress bar mode.
[[1]](diffhunk://#diff-82798dedbe135495e619d4aa27a4bef560c70c7663cf43148b67a26ddde45682R470-R481)
[[2]](diffhunk://#diff-82798dedbe135495e619d4aa27a4bef560c70c7663cf43148b67a26ddde45682L490-R503)
[[3]](diffhunk://#diff-471ba9d9eb65b1a8451d41246db2aa695a42ea4ae4762163adfda4c20fec0950R522-R533)
[[4]](diffhunk://#diff-471ba9d9eb65b1a8451d41246db2aa695a42ea4ae4762163adfda4c20fec0950L539-R548)
**UI/Visual Tweaks:**
* Increased the progress bar height from 4 to 6 pixels for improved
visibility, and refactored code to use the new constant.
[[1]](diffhunk://#diff-dd410cab3a363d78172706d2ad6591f327e9b5b05f314db405db31a667af03faL16-R20)
[[2]](diffhunk://#diff-82798dedbe135495e619d4aa27a4bef560c70c7663cf43148b67a26ddde45682L295-R295)
[[3]](diffhunk://#diff-471ba9d9eb65b1a8451d41246db2aa695a42ea4ae4762163adfda4c20fec0950L177-R177)
These changes collectively provide users with more granular progress
tracking options and a clearer visual indicator for reading progress.
## Additional Context
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
* **What is the goal of this PR?**
Move the "Sync Progress" option from TOC (Chapter Selection) screen to
the Reader Menu, and fix use-after-free crashes related to callback
handling in activity lifecycle.
* **What changes are included?**
- Added "Sync Progress" as a menu item in `EpubReaderMenuActivity` (now
4 items: Go to Chapter, Sync Progress, Go Home, Delete Book Cache)
- Removed sync-related logic from `EpubReaderChapterSelectionActivity` -
TOC now only displays chapters
- Implemented `pendingGoHome` and `pendingSubactivityExit` flags in
`EpubReaderActivity` to safely handle activity destruction
- Fixed GO_HOME, DELETE_CACHE, and SYNC menu actions to use deferred
callbacks avoiding use-after-free
## Additional Context
* Root cause of crashes: callbacks like `onGoHome()` or `onCancel()`
invoked from activity handlers could destroy the current activity while
code was still executing, causing use-after-free and race conditions
with FreeRTOS display task.
* Solution: Deferred execution pattern - set flags and process them in
`loop()` after all nested activity loops have safely returned.
* Files changed: `EpubReaderMenuActivity.h`,
`EpubReaderActivity.h/.cpp`, `EpubReaderChapterSelectionActivity.h/.cpp`
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
Co-authored-by: danoooob <danoooob@example.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
Fixes issue #182
## Summary
**What is the goal of this PR?**
When inline styles change mid-paragraph, words like periods, commas, and
quotes could end up as separate tokens. The justified text algorithm was
treating these as regular words, adding space before them.
**What changes are included?**
Now tracks which words are "attaching punctuation" (., , ! ? ; : " ' and
smart quotes) and excludes them from gap counting. These punctuation
marks attach directly to the preceding word without spacing.
## Additional Context
This is split out from code in #411 to address this comment
https://github.com/crosspoint-reader/crosspoint-reader/pull/411#discussion_r2751166631
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_, Claude Code
## Summary
Minor fix
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? no
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Add shift lock to KeyboardEntryActivity
https://github.com/user-attachments/assets/00973866-6b87-4d5b-a3bf-6f4f85a5e0a6
(Apologies for the graininess of the video - I was struggling to get it
below 10mb)
* **What changes are included?**
* Relax shift disable criteria to include any character
* Add third shift option `LOCK` which is not disabled on character
entry.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
This adds renaming and moving files to the File Manager
* **What changes are included?**
New `/move` and `/rename` endpoints, and corresponding modals and icons
added. Uses the `file.rename()` function, after sanity checking.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
Fixes#559, #661, #663. Only touches the File Manager, so low risk of
affecting other systems.
Simpler than #619, at the cost of not migrating the cache of renamed
books.
<img width="870" height="437" alt="image"
src="https://github.com/user-attachments/assets/73e0e750-dfc8-48e0-a7a6-9694470b7ded"
/>
<img width="575" height="318" alt="image"
src="https://github.com/user-attachments/assets/38c5fb19-c38a-436b-b3ad-75c1be7375ab"
/>
<img width="574" height="293" alt="image"
src="https://github.com/user-attachments/assets/1d2a2403-765d-473f-8c4f-c6968e9bbfeb"
/>
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
I used Codex for the implementation itself, and then carefully reviewed
the code myself. As this is a simple change and only to the webserver,
it is low risk.
## Summary
* **What is the goal of this PR?**
The goal of this PR is to deliver a fix for or at least mitigate the
impact of the issue described in #561
* **What changes are included?**
This PR includes a new option "Sunlight Fading Fix" under "Settings ->
Display".
When set to ON, we will disable the displays analog supply voltage after
every update and turn it back on before the next update.
## Additional Context
* Until now, I was only able to do limited testing because of limited
sunlight at my location, but the fix seems to be working. I'll also
attach a pre-built binary based on 0.16.0 (current master) with the fix
applied to the linked ticket, as building this fix is a bit annoying
because the submodule open-x4-sdk also needs an update.
* [PR in
open-x4-sdk](https://github.com/open-x4-epaper/community-sdk/pull/15)
needs to be merged first, we also need to add another commit to this
here PR, updating this dependency.
* I decided to hide this behind a default-OFF option. While I'm not
really concerned that this fix might potentially damage the display,
someone more knowledgeable on E-Ink technology could maybe have a look
at this.
* There's a binary attached in the linked issue, if someone has the
required sunlight to test this in-depth.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Add PR title check on sync
## Additional Context
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
* Adds Go To % action in Epub Reader menu with slider style percent
selector
<img width="860" height="1147" alt="image"
src="https://github.com/user-attachments/assets/a38ecc71-429e-40e8-94ac-37fb1509dbd9"
/>
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
* **What is the goal of this PR?** Provide support to koreader sync
server embedded in the popular *Calibre Web Automated* self-hosted
digital library solution.
* **What changes are included?**
* Trivial addition of **HTTP Basic Auth (RFC 7617) header** to
`lib/KOReaderSync/KOReaderSyncClient.cpp`
## Additional Context
None
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: drbourbon <fabio@MacBook-Air-di-Fabio.local>
## Summary
* Add CI check job to consolidate status
## Additional Context
* As in the inline comment:
> This job is used as the PR required actions check, allows for changes
to other steps in the future without breaking PR requirements.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
* adds rotation setting in epub reader menu, actual rotation happens on
going back
* improves button hint drawing to draw correctly in all orientations
<img width="860" height="1147" alt="image"
src="https://github.com/user-attachments/assets/91ceeca6-729f-4304-b68a-e412f6e2c9a7"
/>
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
Allows to fallback to custom sleep screens if the book does not have a
cover.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< partially >**_
---------
Co-authored-by: mrtnvgr <root@unixis.fun>
## Summary
Use non-crop mode as expected for home thumb generation. I likely broke
this when I fixed the artifacts on the sleep screen.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
- Allows back button to be held to escape boot loops when reader
activity crashes and device attempts to boot to previous state
- Reduces the need of removing SD card and access to another device to
delete the `/.crosspoint/state.bin`
* **What changes are included?**
- Back button can be held while booting to boot to home screen
- Update of User Guide section to include this feature
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Arthur Tazhitdinov <lisnake@gmail.com>
## Summary
* Additional documentation for CrossPoint in the way of a SCOPE.md and
GOVERNANCE.md document.
* These are intentionally pretty lightweight for now
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? Partially
## Summary
### What is the goal of this PR?
- Visual UI overhaul
- UI theme selection
### What changes are included?
- Added a setting "UI Theme": Classic, Lyra
- The classic theme is the current Crosspoint theme
- The Lyra theme implements these mockups:
https://www.figma.com/design/UhxoV4DgUnfrDQgMPPTXog/Lyra-Theme?node-id=2003-7596&t=4CSOZqf0n9uQMxDt-0
by Discord users yagofarias, ruby and gan_shu
- New functions in GFXRenderer to render rounded rectangles, greyscale
fills (using dithering) and thick lines
- Basic UI components are factored into BaseTheme methods which can be
overridden by each additional theme. Methods that are not overridden
will fallback to BaseTheme behavior. This means any new
features/components in CrossPoint only need to be developed for the
"Classic" BaseTheme.
- Additional themes can easily be developed by the community using this
foundation
## Additional Context
- Only the Home, Library and main Settings screens have been implemented
so far, this will be extended to the transfer screens and chapter
selection screen later on, but we need to get the ball rolling somehow
:)
- Loading extra covers on the home screen in the Lyra theme takes a
little more time (about 2 seconds), I added a loading bar popup (reusing
the Indexing progress bar from the reader view, factored into a neat UI
component) but the popup adds ~400ms to the loading time.
- ~~Home screen thumbnails will need to be generated separately for each
theme, because they are displayed in different sizes. Because we're
using dithering, displaying a thumb with the wrong size causes the
picture to look janky or dark as it does on the screenshots above. No
worries this will be fixed in a future PR.~~ Thumbs are now generated
with a size parameter
- UI Icons will need to be implemented in a future PR.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
This is not a vibe coded PR. Copilot was used for autocompletion to save
time but I reviewed, understood and edited all generated code.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
- Adds basic CSS parsing to EPUBs and determine the CSS rules when
rendering to the screen so that text is styled correctly. Currently
supports bold, underline, italics, margin, padding, and text alignment
## Additional Context
- My main reason for wanting this is that the book I'm currently
reading, Carl's Doomsday Scenario (2nd in the Dungeon Crawler Carl
series), relies _a lot_ on styled text for telling parts of the story.
When text is bolded, it's supposed to be a message that's rendered
"on-screen" in the story. When characters are "chatting" with each
other, the text is bolded and their names are underlined. Plus, normal
emphasis is provided with italicizing words here and there. So, this
greatly improves my experience reading this book on the Xteink, and I
figured it was useful enough for others too.
- For transparency: I'm a software engineer, but I'm mostly frontend and
TypeScript/JavaScript. It's been _years_ since I did any C/C++, so I
would not be surprised if I'm doing something dumb along the way in this
code. Please don't hesitate to ask for changes if something looks off. I
heavily relied on Claude Code for help, and I had a lot of inspiration
from how [microreader](https://github.com/CidVonHighwind/microreader)
achieves their CSS parsing and styling. I did give this as good of a
code review as I could and went through everything, and _it works on my
machine_ 😄
### Before
### After
---
### AI Usage
Did you use AI tools to help write this code? **YES**, Claude Code
## Summary
The main motivation behind this PR was because `uploadBuffer` is
statically allocated, but only used when web server is enabled. This
results in 4KB of memory sitting idle most of the time.
As expected, 4KB of initial RAM is freed with this PR:
```
master:
RAM: [=== ] 32.5% (used 106508 bytes from 327680 bytes)
PR:
RAM: [=== ] 31.2% (used 102276 bytes from 327680 bytes)
```
## Additional Context
This also highlights the importance of only using statically-allocated
buffer when absolutely needed (for example, if the component is active
most of the time). Otherwise, it makes more sense to tie the buffer's
life cycle to its activity.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
## Summary
**What is the goal of this PR?**
- Minor correction to the `debugging_monitor.py` script instructions
**What changes are included?**
- `pyserial` should be installed, NOT `serial`, which is a [different
lib](https://pypi.org/project/serial/)
- Added macOS serial port
## Additional Context
- Just a minor docs update. I can confirm the debugging script is
working great on macOS
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
## Summary
* Instruction text says "Press OK to scan again" but button label is
actually "Connect" (not OK)
* Corrects instruction text
---
### AI Usage
Did you use AI tools to help write this code? **No**
## Rationale
I have 2 wifi access points with almost identical names, just one has
`_EXT` at the end of it. With the current display limit of 13 characters
before adding ellipsis, I can't tell which is which.
Before device screenshot with masked SSIDs:
<img
src="https://github.com/user-attachments/assets/3c5cbbaa-b2f6-412f-b5a8-6278963bd0f2"
width="300">
## Summary
Adjusted displayed length from 13 characters to 30 in the Wifi selection
screen - I've left some space for potential proportional font changes in
the future
After image with masked SSIDs:
<img
src="https://github.com/user-attachments/assets/c5f0712b-bbd3-4eec-9820-4693fae90c9f"
width="300">
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
## Summary
Resolves#562
Implements regex change to support valid characters discussed by
@daveallie in issue
[here](https://github.com/crosspoint-reader/crosspoint-reader/issues/562#issuecomment-3830809156).
Also rejects `.` and `..` as folder names which are invalid in FAT32 and
exFAT filesystems
## Additional Context
- Unsure on the wording for the alert, it feels overly explicit, but
that might be a good thing. Happy to change.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
* **What is the goal of this PR?**
Add a debugging script to help developers monitor the ESP32 serial port
directly from a PC.
* **What changes are included?**
Added a new script: scripts/debugging_monitor.py
## Additional Context
While working on a new Crosspoint-Reader feature, it quickly became
clear that watching the ESP32 serial output without any visual cues was
inconvenient and easy to mess up.
This script improves the debugging experience by reading data from the
serial port and providing:
1. A timestamp prefix for every log line (instead of milliseconds since
power-up)
2. Color-coded output for different message types
3. A secondary window displaying a live graph of RAM usage, which is
especially useful for tracking the memory impact of new features
<img width="1916" height="1049" alt="Screenshot_20260126_183811"
src="https://github.com/user-attachments/assets/6291887f-ac17-43ac-9e43-f5dec8a7097e"
/>
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY >**_
I wrote the initial version of the script. Gemini was used to help add
the Matplotlib-based graphing and threading logic.
## Summary
* Truncating chapter titles using utf8 safe functions (Cyrillic titles
were split mid codepoint)
* refactoring of lib/Utf8
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
* Fixing custom sleep behaviour where the first image in the /sleep
directory is not shown
* image at index 0 is not being rendered when more than 1 image is
stored in /sleep directory, because `APP_STATE.lastSleepImage` is always
0.
## Additional Context
* `APP_STATE.lastSleepImage` is reset to 0 when a epub is open, this
value is only used to compare it to the randomly selected one in
`renderCustomSleepScreen()` that should always be a valid index, since
the list of valid bmp images is colected from scratch. -> no need to
reset it and block image @ index 0 from being rendered
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Co-authored-by: Oyster <Oyster@home>
## Summary
* This change hides the button hints from overlapping chapter titles
when in landscape CW mode.
Before
After
## Additional Context
* I initially considered implementing an offset fix, but with potential
UI changes on the horizon, hiding the button hints appears to be the
simplest solution for now.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? < Partially >
## Summary
* Clarify strings on Wifi connection error screens
* I have confirmed on device that these are short enough not to overflow
screen margins
## Additional Context
* Several screens give duplicative text (e.g., header "Connection
Failed" with contents text "Connection failed") or slightly confusing
text (header "Forget Network?" with text "Remove saved password?")
---
### AI Usage
Did you use AI tools to help write this code? **No**
## Summary
* refactors Indexing popups into ScreenComponents (they had different
implementations in different files)
* removes Indexing popup for small chapters
* only show Indexing popup (without progress bar) for large chapters
(using same minimum file size condition as for progress bar before)
## Additional Context
* Having to show even single popup message and redraw the screen slows
down the flow significantly
* Testing results:
* Opening large chapter with progress bar - 11 seconds
* Same chapter without progress bar, only single Indexing popup - 5
seconds
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY>**_
## Summary
* Adds a menu in the Epub reader
* The Chapter selection is moved there to pos 1 (so it can be reached by
double tapping the confirm button)
* A Go Home is there, too
* Most significantly, a function "Delete Book Cache" is added. This
returns to main (to avoid directly rebuilding cached items, eg. if this
is used to debug/develop other areas - and it's also easier ;))
Probably, the Sync function could now be moved from the Chapter
selection to this menu, too.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
Extracted some changes from
https://github.com/crosspoint-reader/crosspoint-reader/pull/500 to make
reviewing easier
This PR adds HAL (Hardware Abstraction Layer) for display and GPIO
components, making it easier to write a stub or an emulated
implementation of the hardware.
SD card HAL will be added via another PR, because it's a bit more
tricky.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
* **What is the goal of this PR?** Implement a metadata viewer for the
Recents screen
* **What changes are included?**
| Recents | Files |
| --- | --- |
| <img alt="image"
src="https://github.com/user-attachments/assets/e0f2d816-ddce-4a2e-bd4a-cd431d0e6532"
/> | <img alt="image"
src="https://github.com/user-attachments/assets/3225cdce-d501-4175-bc92-73cb8bfe7a41"
/> |
For the Files screen, I have not made any changes on purpose. For the
Recents screen, we now display the Book title and author. If it is a
file with no epub metadata like txt or md, we display the file name
without the file extension.
---
Did you use AI tools to help write this code? _**< YES >**_
Although I went trough all the code manually and made changes as well,
please be aware the majority of the code is AI generated.
---------
Co-authored-by: Eliz Kilic <elizk@google.com>
## Summary
* Correctly render italics on image alt placeholders
* Parser incorrectly handled depth of self-closing tags
* Self-closing tags immediately call start and end tag
## Additional Context
* Previously, it would incorrectly make the whole chapter bold/italics,
or not italicised the image alt
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
* **What is the goal of this PR?**
Quality of Life
* **What changes are included?**
Add compile_commands.json & .cache to .gitignore .
Both are use by clangd that can help IDE support.
Run `pio run --target compiledb` to generate `compile_commands.json`.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Finally, I have received my device and got to chance to work on OTA.
https://github.com/crosspoint-reader/crosspoint-reader/issues/176
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Existing OTA functionality is very buggy, many of times (I would say 8
out of 10) are end up with fail for me. When the time that it works it
is very slow and take ages. For others looks like end up with crash or
different issues.
* **What changes are included?**
To be honest, I'm not familiar with Arduino APIs of OTA process, but
looks like not good as much esp-idf itself. I always found Arduino APIs
very bulky for esp32. Wrappers and wrappers.
## Additional Context
Right now, OTA takes ~ 3min 10sec (of course depends on size of .bin
file). Can be tested with playing version info inside from
`platform.ini` file.
```
[crosspoint]
version = 0.14.0
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
## Summary
Optimizes EPUB metadata indexing for large books (2000+ chapters) from
~30 minutes to ~50 seconds by replacing O(n²) algorithms with O(n log n)
hash-indexed lookups.
Fixes#134
## Problem
Three phases had O(n²) complexity due to nested loops:
| Phase | Operation | Before (2768 chapters) |
|-------|-----------|------------------------|
| OPF Pass | For each spine ref, scan all manifest items | ~25 min |
| TOC Pass | For each TOC entry, scan all spine items | ~5 min |
| buildBookBin | For each spine item, scan ZIP central directory | ~8.4
min |
Total: **~30+ minutes** for first-time indexing of large EPUBs.
## Solution
Replace linear scans with sorted hash indexes + binary search:
- **OPF Pass**: Build `{hash(id), len, offset}` index from manifest,
binary search for each spine ref
- **TOC Pass**: Build `{hash(href), len, spineIndex}` index from spine,
binary search for each TOC entry
- **buildBookBin**: New `ZipFile::fillUncompressedSizes()` API - single
ZIP central directory scan with batch hash matching
All indexes use FNV-1a hashing with length as secondary key to minimize
collisions. Indexes are freed immediately after each phase.
## Results
**Shadow Slave EPUB (2768 chapters):**
| Phase | Before | After | Speedup |
|-------|--------|-------|---------|
| OPF pass | ~25 min | 10.8 sec | ~140x |
| TOC pass | ~5 min | 4.7 sec | ~60x |
| buildBookBin | 506 sec | 34.6 sec | ~15x |
| **Total** | **~30+ min** | **~50 sec** | **~36x** |
**Normal EPUB (87 chapters):** 1.7 sec - no regression.
## Memory
Peak temporary memory during indexing:
- OPF index: ~33KB (2770 items × 12 bytes)
- TOC index: ~33KB (2768 items × 12 bytes)
- ZIP batch: ~44KB (targets + sizes arrays)
All indexes cleared immediately after each phase. No OOM risk on
ESP32-C3.
## Note on Threshold
All optimizations are gated by `LARGE_SPINE_THRESHOLD = 400` to preserve
existing behavior for small books. However, the algorithms work
correctly for any book size and are faster even for small books:
| Book Size | Old O(n²) | New O(n log n) | Improvement |
|-----------|-----------|----------------|-------------|
| 10 ch | 100 ops | 50 ops | 2x |
| 100 ch | 10K ops | 800 ops | 12x |
| 400 ch | 160K ops | 4K ops | 40x |
If preferred, the threshold could be removed to use the optimized path
universally.
## Testing
- [x] Shadow Slave (2768 chapters): 50s first-time indexing, loads and
navigates correctly
- [x] Normal book (87 chapters): 1.7s indexing, no regression
- [x] Build passes
- [x] clang-format passes
## Files Changed
- `lib/Epub/Epub/parsers/ContentOpfParser.h/.cpp` - OPF manifest index
- `lib/Epub/Epub/BookMetadataCache.h/.cpp` - TOC index + batch size
lookup
- `lib/ZipFile/ZipFile.h/.cpp` - New `fillUncompressedSizes()` API
- `lib/Epub/Epub.cpp` - Timing logs
<details>
<summary><b>Algorithm Details</b> (click to expand)</summary>
### Phase 1: OPF Pass - Manifest to Spine Lookup
**Problem**: Each `<itemref idref="ch001">` in spine must find matching
`<item id="ch001" href="...">` in manifest.
```
OLD: For each of 2768 spine refs, scan all 2770 manifest items
= 7.6M string comparisons
NEW: While parsing manifest, build index:
{ hash("ch001"), len=5, file_offset=120 }
Sort index, then binary search for each spine ref:
2768 × log₂(2770) ≈ 2768 × 11 = 30K comparisons
```
### Phase 2: TOC Pass - TOC Entry to Spine Index Lookup
**Problem**: Each TOC entry with `href="chapter0001.xhtml"` must find
its spine index.
```
OLD: For each of 2768 TOC entries, scan all 2768 spine entries
= 7.6M string comparisons
NEW: At beginTocPass(), read spine once and build index:
{ hash("OEBPS/chapter0001.xhtml"), len=25, spineIndex=0 }
Sort index, binary search for each TOC entry:
2768 × log₂(2768) ≈ 30K comparisons
Clear index at endTocPass() to free memory.
```
### Phase 3: buildBookBin - ZIP Size Lookup
**Problem**: Need uncompressed file size for each spine item (for
reading progress). Sizes are in ZIP central directory.
```
OLD: For each of 2768 spine items, scan ZIP central directory (2773 entries)
= 7.6M filename reads + string comparisons
Time: 506 seconds
NEW:
Step 1: Build targets from spine
{ hash("OEBPS/chapter0001.xhtml"), len=25, index=0 }
Sort by (hash, len)
Step 2: Single pass through ZIP central directory
For each entry:
- Compute hash ON THE FLY (no string allocation)
- Binary search targets
- If match: sizes[target.index] = uncompressedSize
Step 3: Use sizes array directly (O(1) per spine item)
Total: 2773 entries × log₂(2768) ≈ 33K comparisons
Time: 35 seconds
```
### Why Hash + Length?
Using 64-bit FNV-1a hash + string length as a composite key:
- Collision probability: ~1 in 2⁶⁴ × typical_path_lengths
- No string storage needed in index (just 12-16 bytes per entry)
- Integer comparisons are faster than string comparisons
- Verification on match handles the rare collision case
</details>
---
_AI-assisted development. All changes tested on hardware._
## Summary
* **What is the goal of this PR?** Add Spanish language hyphenation
support to improve text rendering for Spanish books.
* **What changes are included?**
- Added Spanish hyphenation trie (`hyph-es.trie.h`) generated from
Typst's hypher patterns
- Registered `spanishHyphenator` in `LanguageRegistry.cpp` for language
tag `es`
- Added Spanish to the hyphenation evaluation test suite
- Added Spanish test data file with 5000 test cases
## Additional Context
* **Test Results:** Spanish hyphenation achieves 99.02% F1 Score (97.72%
perfect matches out of 5000 test cases)
* **Compatibility:** Works automatically for EPUBs with
`<dc:language>es</dc:language>` (or es-ES, es-MX, etc.)
<img width="115" height="189" alt="imagen"
src="https://github.com/user-attachments/assets/9b92e7fc-b98d-48af-8d53-dfdc2e68abee"
/>
| Metric | Value |
|--------|-------|
| Perfect matches | 97.72% |
| Overall Precision | 99.33% |
| Overall Recall | 99.42% |
| Overall F1 Score | 99.38% |
---
### AI Usage
Did you use AI tools to help write this code? _**PARTIALLY**_
AI assisted with:
- Guiding and compile
- Preparing the PR description
## Summary
* If long-press chapter skip is disabled, turn pages on button pressed,
not released
* Makes page turning snappier
* Refactors MappedInputManager for readability
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY>**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** This PR introduces a new "Status Bar"
mode that displays a visual progress bar at the bottom of the screen,
providing readers with a graphical indication of their position within
the book.
* **What changes are included?**
* **Settings**: Updated SettingsActivity to expand the "Status Bar"
configuration with a new option: Full w/ Progress Bar.
* **EPUB Reader**: Modified EpubReaderActivity to calculate the global
book progress and render a progress bar at the bottom of the viewable
area when the new setting is active.
* **TXT Reader**: Modified TxtReaderActivity to implement similar
progress bar rendering logic based on the current page and total page
count.
## Additional Context
* The progress bar is rendered with a height of 4 pixels at the very
bottom of the screen (adjusted for margins).
* The feature reuses the existing renderStatusBar logic but
conditionally draws the bar instead of (or in addition to) other
elements depending on the specific implementation details in each
reader.
* Renamed existing 'Full' mode to 'Full w/ Percentage'
* Added new 'Full w/ Progress Bar' option
<img
src="https://github.com/user-attachments/assets/08c0dd49-c64c-4d4d-9fbb-f576c02d05d9"
width="500">
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Fixes#487
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _** YES **_
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
This was originally a comment in #499, but I'm making it its own PR,
because it doesn't depend on anything there and then I can base that PR
on this one.
Currently, `drawBitmap` is used for covers and sleep wallpaper, and
`drawImage` is used for the boot logo. `drawBitmap` goes row by row and
pixel by pixel, so it respects the renderer orientation. `drawImage`
just calls the `EInkDisplay`'s `drawImage`, which works in the eink
panel's native display orientation.
`drawImage` rotates the x,y coordinates where it's going to draw the
image, but doesn't account for the fact that the northwest corner in
portrait orientation becomes, the southwest corner of the image
rectangle in the native orientation. The boot and sleep activities
currently work around this by calculating the north*east* corner of
where the image should go, which becomes the northwest corner after
`rotateCoordinates`.
I think this wasn't really apparent because the CrossPoint logo is
rotationally symmetrical. The `EInkDisplay` `drawImage` always draws the
image in native orientation, but that looks the same for the "X" image.
If we rotate the origin coordinate in `GfxRenderer`'s `drawImage`, we
can use a much clearer northwest corner coordinate in the boot and sleep
activities. (And then, in #499, we can actually rotate the boot screen
to the user's preferred orientation).
This does *not* yet rotate the actual bits in the image; it's still
displayed in native orientation. This doesn't affect the
rotationally-symmetric logo, but if it's ever changed, we will probably
want to allocate a new `u8int[]` and transpose rows and columns if
necessary.
## Additional Context
I've created an additional branch on top of this to demonstrate by
replacing the logo with a non-rotationally-symmetrical image:
<img width="128" height="128" alt="Cat-in-a-pan-128-bw"
src="https://github.com/user-attachments/assets/d0b239bc-fe75-4ec8-bc02-9cf9436ca65f"
/>
https://github.com/crosspoint-reader/crosspoint-reader/compare/master...maeveynot:rotated-cat
(many thanks to https://notisrac.github.io/FileToCArray/)
As you can see, it is always drawn in native orientation, which makes it
sideways (turned clockwise) in portrait.
---
### AI Usage
No
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* Extract author from XTC/XTCH files
## Additional Context
* Based on updated details in
https://gist.github.com/CrazyCoder/b125f26d6987c0620058249f59f1327d
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
* **What is the goal of this PR?** Simple quality of life, ease
maintenance
* **What changes are included?**
Update fontconvert.py to include the command used to generate each font
file in the header comment, making it easier to regenerate fonts when
needed.
I plan on adding options to this scripts (kerning, and maybe ligatures),
thus knowing which command was used, even with already existing options
like `--additional-intervals`, is important.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
- Update README with the list of supported languages for EPUB files.
- Update USER_GUIDE with an extended list of supported and unsupported
languages.
## Additional Context
For weeks, I thought this firmware only supported English, because I
remember you saying that full language support would only be possible
after implementing proper font rendering. I also remember mentioning a
separate Korean fork, Vietnamese issues and so on.
All of this made it clear that this system doesn't support my languages.
I was surprised when I saw a Reddit post with a photo of a book in my
native language. Only then I did learn that such languages are
supported. Therefore, mentioning the supported languages would help
future buyers and new users.
---
### AI Usage
Did you use AI tools to help write this code? _**NO**_
## Summary
* **What is the goal of this PR?**
Resolve [KoSync progress does not sync between Crosspoint-reader and
KOReader
(Kindle)](https://github.com/crosspoint-reader/crosspoint-reader/issues/502)
* **What changes are included?**
KOReaderDocumentId::getOffset() - Update the value for the md5 offset
calculation to match KOReader.
## Additional Context
I've tested this with a couple of my ebooks and binary matching with
KOReader sync seems to be working fine now for both pushing and pulling
progress.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Should address issues discussed in #168 and potentially fix#478.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* Aims to fix Issue #220
* **What changes are included?**
- Increased size of `progress.bin` such that total page count of current
section can be stored
- Comparison of total page count is done to determine if reader settings
were changed
- New position/page number is calculated using percentage calculated
from read progress
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Fix https://github.com/crosspoint-reader/crosspoint-reader/issues/288
Based on my observation, it seems like the problem was that
`inputManager.isPressed(InputManager::BTN_POWER)` takes a bit of time
after waking up to report the correct value. I haven't tested this
behavior with a standalone ESP32C3, but if you know more about this,
feel free to comment.
However, if we just want short press, I think it's enough to check for
wake up source. If we plan to allow multiple buttons to wake up in the
future, may consider using ext1 / `esp_sleep_get_ext1_wakeup_status()`
to allow identify which pin triggered wake up.
Note that I'm not particularly experienced in esp32 developments, just
happen to have prior knowledge hacking esphome.
## Additional Context
N/A
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Fixes#519
* Refactors repeated code into new function:
`ChapterHtmlSlimParser::flushPartWordBuffer()`
## Additional Context
* The `<br/>` tag is self closing and _in-line_, so the existing logic
for closing block tags does not get applied to `<br/>` tags.
* This PR adds the _in-line_ logic to:
* Flush the word preceding the `<br/>` tag from `partWordBuffer` to
`currentTextBlock` before calling `startNewTextBlock`
* **New function**: `ChapterHtmlSlimParser::flushPartWordBuffer()`
* **Purpose**: Consolidates the logic for flushing `partWordBuffer` to
`currentTextBlock`
* **Impact**: Simplifies `ChapterHtmlSlimParser::characterData(…)`,
`ChapterHtmlSlimParser::startElement(…)`, and
`ChapterHtmlSlimParser::endElement(…)` by integrating reused code into
single function
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Our esp32 consistently dropped the last few packets of the TCP transfer
in the old implementation. Only about 1/5 transfers would complete. I've
refactored that entire system into an actual Calibre Device Plugin that
basically uses the exact same system as the web server's file transfer
protocol. I kept them separate so that we don't muddy up the existing
file transfer stuff even if it's basically the same at the end of the
day I didn't want to limit our ability to change it later.
I've also added basic auth to OPDS and renamed that feature to OPDS
Browser to just disassociate it from Calibre.
---------
Co-authored-by: Arthur Tazhitdinov <lisnake@gmail.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
On the Forget Network page
* Update the default option to be DON'T forget the network
* Make the options clearer ("Cancel" and "Forget network")
* Unify the button hints to match the rest of the UI
## Additional Context
Closes#427
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? PARTIALLY
## Summary
* Fixes#475
* Fixes#477
* Closes#428
## Additional Context
* Updates to
`src/activities/reader/EpubReaderChapterSelectionActivity.cpp` are
copied verbatim from #433 (thanks to @jonasdiemer)
* Update to `src/activities/settings/KOReaderSettingsActivity.cpp` per
discussion with @itsthisjustin at #428
Tested on my device with several books and koreader sync turned on and
off.
---
### AI Usage
Did you use AI tools to help write this code? _NO_
## Summary
Addresses
https://github.com/crosspoint-reader/crosspoint-reader/issues/504
- Reverts book progress % to showing as an integer instead of with a
decimal place
- This was changed to 1 decimal point of precision in
https://github.com/crosspoint-reader/crosspoint-reader/pull/232 from
what I can tell
- As this wasn't the primary intention of that PR, I'm assuming it was
left in accidentally
IMO having a decimal place of precision is too much for something as
vague as book completion percent. This de-clutters the status bar and
prevents extra updates as you change pages.
---
### AI Usage
YES
When reading on Landscape Counter ClockWise mode, the left/right button
appear inverted: the upper button (left) goes down and the lower button
(right) goes up.
Discussion: #449
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Add a new configuration for the front buttons: Back, Confirm, Right,
Left
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
* Add additional punctuation marks to the list of characters that can be
immediately followed by a line break even where there is no explicit
space
## Additional Context
* Huge appreciation to @osteotek for his amazing work on hyphenation.
Reading on the device is so much better now.
* I am getting bad line breaks when ellipses (…) are between words and
book file does not explicitly include some kind of breaking space.
* Per
[discussion](https://github.com/crosspoint-reader/crosspoint-reader/pull/305#issuecomment-3765411406),
several new characters are added in this PR to the `isExplicitHyphen`
list to allow line breaks immediately after them:
Character | Unicode | Usage | Why include it?
-- | -- | -- | --
Solidus (Slash) | U+002F | / | Essential for breaking URLs and "and/or"
constructs.
Backslash | U+005C | \ | Critical for technical text, file paths, and
coding documentation.
Underscore | U+005F | _ | Prevents "runaway" line lengths in usernames
or code snippets.
Middle Dot | U+00B7 | · | Acts as a semantic separator in dictionaries
or stylistic lists.
Ellipsis | U+2026 | … | Prevents justification failure when dialogue
lacks following spaces.
Midline Horizontal Ellipsis | U+22EF | ⋯ | Useful for mathematical
sequences and technical notation.
### Example:
This shows an example of what line breaking looks like *with* this PR.
Note the line break after "matter…" (which would not previously have
been allowed). It's particularly important here because the book
includes non-breaking spaces in "Mr. Aldrich" and "Mr. Rockefeller."
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **PARTIALLY**
## Summary
- Rewrite OpdsParser to stream parsing instead of full content
- Fix OOM due to big http xml response
Closes#385
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## More detailed documentation
* **What is the goal of this PR?**
Add more information about the exposed webserver.
* **What changes are included?**
Detailed documentation for the webserver endpoints
(`./docs/webserver-endpoints.md`)
Adding a table of content so it is easier to navigate directly to the
section you're interested on (Almost all `.md` files or at least all
those relevant)
## Additional Context
Not sure if this would get accepted but I thought it might be useful for
those trying to create separate apps that would sync files to the
device. It was at least to me trying to upload files using python as
stated
[here](https://github.com/crosspoint-reader/crosspoint-reader/discussions/434#discussioncomment-15545349)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
When uploading or downloading an updated ebook from SD/WebUI/OPDS with
same the filename the `.crosspoint` cache is not cleared. This can lead
to issues with the Table of Contents and hangs when switching between
chapters.
I encountered this issue in two places:
- When I need to do further ePub cleaning using Calibre after I load an
ePub and find that some of its formatting should be cleaned up. When I
reprocess the same book and want to place it back in the same location I
need a way to invalidate the cache.
- When syncing RSS feed generated epubs. I generate news ePubs with
filenames like `news-outlet.epub` and so every day when I fetch new news
the crosspoint cache needs to be cleared to load that file.
This change offers the following features:
- On web uploads, if the file already exists, the cache for that file is
cleared
- On OPDS downloads, if the file already exists, the cache for that file
is cleared
- There's now an action for `Clear Cache` in the Settings page which can
clear the cache for all books
Addresses
https://github.com/crosspoint-reader/crosspoint-reader/issues/281
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? PARTIALLY
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Disables going to sleep after uploading new firmware
* Makes developer experience easier
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
Give space to the chapter title if we don't show battery percentage.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Include superscripts and subscripts in fonts
## Additional Context
* Original change came from
https://github.com/crosspoint-reader/crosspoint-reader/pull/248
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
---------
Co-authored-by: cor <cor@pruijs.dev>
# Summary
This PR introduces a reusable Tab Bar component and combines the Recent
Books and File Browser into a unified tabbed page called "My Library"
accessible from the Home screen.
## Features
### New Tab Bar Component
A flexible, reusable tab bar component added to `ScreenComponents` that
can be used throughout the application.
### New Scroll Indicator Component
A page position indicator for lists that span multiple pages.
**Features:**
- Up/down arrow indicators
- Current page fraction display (e.g., "1/3")
- Only renders when content spans multiple pages
### My Library Activity
A new unified view combining Recent Books and File Browser into a single
tabbed page.
**Tabs:**
- **Recent** - Shows recently opened books
- **Files** - Browse SD card directory structure
**Navigation:**
- Up/Down or Left/Right: Navigate through list items
- Left/Right (when first item selected): Switch between tabs
- Confirm: Open selected book or enter directory
- Back: Go up directory (Files tab) or return home
- Long press Back: Jump to root directory (Files tab)
**UI Elements:**
- Tab bar with selection indicator
- Scroll/page indicator on right side
- Side button hints (up/down arrows)
- Dynamic bottom button labels ("BACK" in subdirectories, "HOME" at
root)
## Tab Bar Usage
The tab bar component is designed to be reusable across different
activities. Here's how to use it:
### Basic Example
```cpp
#include "ScreenComponents.h"
void MyActivity::render() const {
renderer.clearScreen();
// Define tabs with labels and selection state
std::vector<TabInfo> tabs = {
{"Tab One", currentTab == 0}, // Selected when currentTab is 0
{"Tab Two", currentTab == 1}, // Selected when currentTab is 1
{"Tab Three", currentTab == 2} // Selected when currentTab is 2
};
// Draw tab bar at Y position 15, returns height of the tab bar
int tabBarHeight = ScreenComponents::drawTabBar(renderer, 15, tabs);
// Position your content below the tab bar
int contentStartY = 15 + tabBarHeight + 10; // Add some padding
// Draw content based on selected tab
if (currentTab == 0) {
renderTabOneContent(contentStartY);
} else if (currentTab == 1) {
renderTabTwoContent(contentStartY);
} else {
renderTabThreeContent(contentStartY);
}
renderer.displayBuffer();
}
```
Video Demo: https://share.cleanshot.com/P6NBncFS
<img width="250"
src="https://github.com/user-attachments/assets/07de4418-968e-4a88-9b42-ac5f53d8a832"
/>
<img width="250"
src="https://github.com/user-attachments/assets/e40201ed-dcc8-4568-b008-cd2bf13ebb2a"
/>
<img width="250"
src="https://github.com/user-attachments/assets/73db269f-e629-4696-b8ca-0b8443451a05"
/>
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
As we get more settings, I think it makes sense to do categories for
them. This just allows users to find the settings easier and navigate to
them.
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
Co-authored-by: dpoulter <daniel@yoco.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
- Implements a fix to truncate chapter names that exceeds display width
* **What changes are included?**
- Implements a fix to truncate chapter names that exceeds display width
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
- Prior to the fix, if the book contains multiple chapters with names
longer than the display width, there is a noticeable delay when
scrolling through the list of chapters.
Serial output of the issue:
```
[25673] [ACT] Entering activity: EpubReaderChapterSelection
[25693] [GFX] !! Outside range (485, 65) -> (65, -6)
[25693] [GFX] !! Outside range (486, 65) -> (65, -7)
[25693] [GFX] !! Outside range (487, 65) -> (65, -8)
[25693] [GFX] !! Outside range (488, 65) -> (65, -9)
[25693] [GFX] !! Outside range (485, 66) -> (66, -6)
[25693] [GFX] !! Outside range (486, 66) -> (66, -7)
[25694] [GFX] !! Outside range (487, 66) -> (66, -8)
[25694] [GFX] !! Outside range (484, 67) -> (67, -5)
[25694] [GFX] !! Outside range (485, 67) -> (67, -6)
[25694] [GFX] !! Outside range (486, 67) -> (67, -7)
[25694] [GFX] !! Outside range (483, 68) -> (68, -4)
[25694] [GFX] !! Outside range (484, 68) -> (68, -5)
[25694] [GFX] !! Outside range (485, 68) -> (68, -6)
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Adds (optional) Hyphenation for English, French, German, Russian
languages
## Additional Context
* Included hyphenation dictionaries add approximately 280kb to the flash
usage (German alone takes 200kb)
* Trie encoded dictionaries are adopted from hypher project
(https://github.com/typst/hypher)
* Soft hyphens (and other explicit hyphens) take precedence over
dict-based hyphenation. Overall, the hyphenation rules are quite
aggressive, as I believe it makes more sense on our smaller screen.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
The current behavior of rendering `?` for an unknown Unicode character
can be hard to distinguish from a typo. Use the standard Unicode
"replacement character" instead, that's what it's designed for:
https://en.wikipedia.org/wiki/Specials_(Unicode_block)
I'm making this PR as a draft because I'm not sure I did everything that
was needed to change the character set covered by the fonts. Running
that script is in its own commit. If this is proper, I'll rebase/squash
into one commit and un-draft.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* Fixes#388
## Additional Context
* Tested on my own device
* See images at #388 for what home screen looked like before.
* With this PR the home screen shows the following (selected and
unselected recent book × cover image rendered or not)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **YES**
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
- Adds KOReader progress sync integration, allowing CrossPoint to sync
reading positions with other
KOReader-compatible devices
- Stores credentials securely with XOR obfuscation
- Uses KOReader's partial MD5 document hashing for cross-device book
matching
- Syncs position via percentage with estimated XPath for compatibility
# Features
- Settings: KOReader Username, Password, and Authenticate options
- Sync from chapters menu: "Sync Progress" option appears when
credentials are configured
- Bidirectional sync: Can apply remote progress or upload local progress
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* This PR solves issue
https://github.com/crosspoint-reader/crosspoint-reader/issues/357 in the
first commit
* I then added an additional commit which means when you reach the end
of the keyboard, if you go 'beyond', you wrap back to the other side.
* This replaces existing behaviour, so if you would rather this be
removed, let me know and I'll just do the `caps` -> `shift` change
## Additional Context
### Screenshots for the new shift display
I thought it might not fit and need column size changes, but ended up
fitting fine, see screenshots showing this below:
<img width="573" height="366" alt="image"
src="https://github.com/user-attachments/assets/b8f6a4ec-94f5-4f5e-b9a6-06cc5f250ddb"
/>
<img width="570" height="308" alt="image"
src="https://github.com/user-attachments/assets/7d775518-4784-4120-a20a-a9dc67af8565"
/>
### Gif showing the wrap-around of the text
---
### AI Usage
Did you use AI tools to help write this code? **PARTIALLY** - used to
double check the text wrapping had no edge-cases. (It did also suggest
rewriting the function, but I decided that was too big of a change for a
working part of the codebase, for now!)
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* **What changes are included?**
- Fix inverted colors in Continue Reading cover image for 1-bit XTC
files
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
- Fix `grayValue = pixelBit ? 0 : 255` → `grayValue = pixelBit ? 255 :
0` in `lib/Xtc/Xtc.cpp`
- The thumb BMP generation had inverted polarity compared to cover BMP
generation
- bit=0 should be black, bit=1 should be white (matching the BMP palette
order)
- Update misleading comment about XTC polarity
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
* Implements #380, allowing the user to see the device's MAC address in
order to register on wifi networks
## Additional Context
* Although @markatlnk suggested showing on the settings screen, I
implemented display at the bottom of the WiFi Networks selection screen
(accessed via "File Transfer" > "Join a Network") since I think it makes
more sense there.
* Tested on my own device
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
* This builds upon the helpful PR
https://github.com/crosspoint-reader/crosspoint-reader/pull/341, and
adds support for the setting to also apply to the XTC reader, which I
believed has just been missed and was not intentionally left out.
* XTC does not have chapter support yet, but it does skip 10 pages when
long-pressed, and so I think this is useful.
---
### AI Usage
Did you use AI tools to help write this code? No
~~Quick~~ fix for
https://github.com/daveallie/crosspoint-reader/issues/362
(this just applies to the chapter selection menu:)
~~If the orientation is portrait, hints as we know them make sense to
draw. If the orientation is inverted, we'd have to change the order of
the labels (along with everything's position), and if it's one of the
landscape choices, we'd have to render the text and buttons vertically.
All those other cases will be more complicated.~~
~~Punt on this for now by only rendering if portrait.~~
Update: this now draws the hints at the physical button position no
matter what the orientation is, by temporarily changing orientation to
portrait.
---------
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
Let's start small by showing the ALT text of IMG. This is rudimentary,
but avoids those otherwise completely blank chapters.
I feel we will need this even when we can render images if that
rendering takes >1s - I would then prefer rendering optional and showing
the ALT text first.
## Summary
* **What is the goal of this PR?**: Fix the bug I reported in
https://github.com/daveallie/crosspoint-reader/issues/292
* **What changes are included?**: Instead of silently dropping table
content in EPUBs., replace with an italicized '[Table omitted]' message
where tables appear.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY **_
---------
Co-authored-by: Evan Fenner <evan@evanfenner.com>
Co-authored-by: Warp <agent@warp.dev>
Currently there is no visual indication whatsoever if something is in a
list. An `<li>` is essentially just another paragraph.
As a partial remedy for this, add a bullet character to the beginning of
`<li>` text blocks so that the user can see that they're list items.
This is incomplete in that an `<ol>` should also have a counter so that
its list items can get numbers instead of bullets (right now I don't
think we track if we're in a `<ul>` or an `<ol>` at all), but it's
strictly better than the current situation.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
Currently, when Extra Paragraph Spacing is off, an em-space is added to
the beginning of each ParsedText even for blocks like headers that are
centered. This whitespace makes the centering slightly off. Change the
calculation here to only add the em-space for left/justified text.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* **What is the goal of this PR?** Fix WiFi file transfer stability
issues (especially crashes during uploads) and improve upload speed via
WebSocket binary protocol. File transfers now don't really crash as
much, if they do it recovers and speed has gone form 50KB/s to 300+KB/s.
* **What changes are included?**
- **WebSocket upload support** - Adds WebSocket binary protocol for file
uploads, achieving faster speeds 335 KB/s vs HTTP multipart)
- **Watchdog stability fixes** - Adds `esp_task_wdt_reset()` calls
throughout upload path to prevent watchdog timeouts during:
- File creation (FAT allocation can be slow)
- SD card write operations
- HTTP header parsing
- WebSocket chunk processing
- **4KB write buffering** - Batches SD card writes to reduce I/O
overhead
- **WiFi health monitoring** - Detects WiFi disconnection in STA mode
and exits gracefully
- **Improved handleClient loop** - 500 iterations with periodic watchdog
resets and button checks for responsiveness
- **Progress bar improvements** - Fixed jumping/inaccurate progress by
capping local progress at 95% until server confirms completion
- **Exit button responsiveness** - Button now checked inside the
handleClient loop every 64 iterations
- **Reduced exit delays** - Decreased shutdown delays from ~850ms to
~140ms
**Files changed:**
- `platformio.ini` - Added WebSockets library dependency
- `CrossPointWebServer.cpp/h` - WebSocket server, upload buffering,
watchdog resets
- `CrossPointWebServerActivity.cpp` - WiFi monitoring, improved loop,
button handling
- `FilesPage.html` - WebSocket upload JavaScript with HTTP fallback
## Additional Context
- WebSocket uses 4KB chunks with backpressure management to prevent
ESP32 buffer overflow
- Falls back to HTTP automatically if WebSocket connection fails
- The main bottleneck now is SD card write speed (~44% of transfer
time), not WiFi
- STA mode was more prone to crashes than AP mode due to external
network factors; WiFi health monitoring helps detect and handle
disconnections gracefully
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_ Claude did it
ALL, I have no idea what I am doing, but my books transfer fast now.
---------
Co-authored-by: Claude <noreply@anthropic.com>
## Summary
Adds a new "Long-press Chapter Skip" toggle in Settings to control
whether holding the side buttons skips chapters.
I kept accidentally triggering chapter skips while reading, which caused
me to lose my place in the middle of long chapters.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY **_
## Summary
Adds define to omit optional fonts from the build. This reduces time to
flash from >31s to <13s. Useful for development that doesn't require
fonts. Addresses #193
Invoke it like this during development:
`PLATFORMIO_BUILD_FLAGS="-D OMIT_FONTS" pio run --target upload && pio
device monitor`
Changing the define causes `pio` to do a full rebuild (but it will be
quick if you keep the define).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
## Summary
Skip BOM character (sometimes used in front of em-dashes) - they are not
part of the glyph set and would render `?` otherwise.
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
## Summary
* **What is the goal of this PR?**
Add support for reading plain text (.txt) files, enabling users to
browse, read, and track progress in TXT documents alongside existing
EPUB and XTC formats.
* **What changes are included?**
- New Txt library for loading and parsing plain text files
- New TxtReaderActivity with streaming page rendering using 8KB chunks
to handle large files without memory issues on ESP32-C3
- Page index caching system (index.bin) for instant re-open after sleep
or app restart
- Progress bar UI during initial file indexing (matching EPUB style)
- Word wrapping with proper UTF-8 support
- Cover image support for TXT files:
- Primary: image with same filename as TXT (e.g., book.jpg for book.txt)
- Fallback: cover.bmp/jpg/jpeg in the same folder
- JPG to BMP conversion using existing converter
- Sleep screen cover mode now works with TXT files
- File browser now shows .txt files
## Additional Context
* Add any other information that might be helpful for the reviewer
* Memory constraints: The streaming approach was necessary because
ESP32-C3 only has 320KB RAM. A 700KB TXT file cannot be loaded entirely
into memory, so we read 8KB chunks and build a page offset index
instead.
* Cache invalidation: The page index cache automatically invalidates
when file size, viewport width, or lines per page changes (e.g., font
size or orientation change).
* Performance: First open requires indexing (with progress bar),
subsequent opens load from cache instantly.
* Cover image format: PNG is detected but not supported for conversion
(no PNG decoder available). Only BMP and JPG/JPEG work.
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module,
Display the book cover image in the **"Continue Reading"** card on the
home screen, with fast navigation using framebuffer caching.
* **What changes are included?**
- Display book cover image in the "Continue Reading" card on home screen
- Load cover from cached BMP (same as sleep screen cover)
- Add framebuffer store/restore functions (`copyStoredBwBuffer`,
`freeStoredBwBuffer`) for fast navigation after initial render
- Fix `drawBitmap` scaling bug: apply scale to offset only, not to base
coordinates
- Add white text boxes behind title/author/continue reading label for
readability on cover
- Support both EPUB and XTC file cover images
- Increase HomeActivity task stack size from 2048 to 4096 for cover
image rendering
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
- Performance: First render loads cover from SD card (~800ms),
subsequent navigation uses cached framebuffer (~instant)
- Memory: Framebuffer cache uses ~48KB (6 chunks × 8KB) while on home
screen, freed on exit
- Fallback: If cover image is not available, falls back to standard
text-only display
- The `drawBitmap` fix corrects a bug where screenY = (y + offset) scale
was incorrectly scaling the base coordinates. Now correctly uses screenY
= y + (offset scale)
When picking a random sleep image from a set of custom images, compare
the randomly chosen index against a cached value in settings. If the
value matches, use the next image (rolling over if it's the last image).
Cache the chosen image index to settings in either case.
## Summary
Implements a tweak on the custom sleep image feature that ensures that
the user gets a new image every time the device goes to sleep.
This change adds a new setting (perhaps there's a better place to cache
this?) that stores the most recently used file index. During picking the
random image index, we compare this against the random index and choose
the next one (modulo the number of image files) if it matches, ensuring
we get a new image.
## Additional Context
As mentioned, I used settings to cache this value since it is a
persisted store, perhaps that's overkill. Open to suggestions on if
there's a better way.
**Description**:
Add a new workflow to check the PR formatting to ensure consistency on
PR titles. We can also use this for semantic release versioning later,
if we so desire.
**Related Issue(s)**:
Implements first portion of #327
---------
Signed-off-by: Andrew Brandt <brandt.andrew89@gmail.com>
## Summary
* fix: Increase home activity stack size
## Additional Context
* Home activity can crash occasionally depending on book
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
- Nav file in EPUB 3 file is a HTML file with relative hrefs
- If this file exists anywhere but in the same location as the
content.opf file, navigating in the book will fail
- Bump the book cache version to rebuild potentially broken books
## Additional Context
- Fixes https://github.com/daveallie/crosspoint-reader/issues/264
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code?
- [ ] Yes
- [ ] Partially
- [x] No
1. Refactor Bitmap.cpp/h to expose the options for FloydSteinberg and
brightness/gamma correction at runtime
2. Fine-tune the thresholds for Floyd Steiberg and simple quantization
to better match the display's colors
Turns out that 2 is enough to make the images render properly, so the
brightness boost and gamma adjustment doesn't seem necessary currently
(at least for my test image).
## Summary
* **What is the goal of this PR?**
Fixes the Wi-Fi connection issue when launching the Calibre Library
(OPDS browser). The previous implementation always attempted to connect
using the first saved WiFi credential, which caused connection failures
when users were in locations where only other saved networks (not the
first one) were available. Now, the activity launches a WiFi selection
screen allowing users to choose from available networks.
* **What changes are included?**
## Additional Context
**Bug Fixed**: Previously, the code used `credentials[0]` (always the
first saved WiFi), so users in areas with only their secondary/tertiary
saved networks available could never connect.
---------
Co-authored-by: danoooob <danoooob@example.com>
**Description**:
The purpose of this change is to modify the spacing in the
`.github/workflow` files to ensure consistency.
**Related Issue(s)**:
Implements #319
Signed-off-by: Andrew Brandt <brandt.andrew89@gmail.com>
## Summary
* **What is the goal of this PR?**
* This PR adds a setting to (additionally) map the forward page turn
onto the powerbutton when in `EPUBReaderActivity` and powerbutton short
press is not mapped to sleep mode. I find the powerbutton to be exactly
where my thumb is while reading so it is very convenient to map the
forwardpage turn to that. Maybe Im not alone with this ^^
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
## Summary
* Remove HTML entity parsing
* This has been completely useless since the introduction of expat
* expat tries to parse all entities in the document, but only knows of
HTML ones
* Parsing will never end with HTML entities in the text, so the
additional step to parse them that we had went completely unused
* We should figure out the best way to parse that content in the future,
but for now remove that module as it generates a lot of heap allocations
with its map and strings
## Summary
Fixes https://github.com/daveallie/crosspoint-reader/issues/233
## Additional Context
By disabling the Text Anti-Aliasing in the settings, you can get faster
black-and-white page turns that work exactly like the stock firmware,
instead of having an additional flash after rendering (see issue linked
above for example).
Tested on the X4 and confirmed working.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Adds feature to file selection activity for better user navigation when
ascending folders. The activity now remembers the index of the parent
folder instead of always resetting to the first element.
I don't have any means of testing this, so if someone could test it
that'd be great
Resolves#259
## Summary
Adds support for browsing and downloading books from a Calibre-web
server via OPDS.
How it works
1. Configure server URL in Settings → Calibre Web URL (e.g.,
https://myserver.com:port I use Cloudflare tunnel to make my server
accessible anywhere fwiw)
2. "Calibre Library" will now show on the the home screen
3. Browse the catalog - navigate through categories like "By Newest",
"By Author", "By Series", etc.
4. Download books - select a book and press Confirm to download the EPUB
to your device
Navigation
- Up/Down - Move through entries
- Confirm - Open folder or download book
- Back - Go to parent catalog, or exit to home if at root
- Navigation entries show with > prefix, books show title and author
- Button hints update dynamically ("Open" for folders, "Download" for
books)
Technical details
- Fetches OPDS catalog from {server_url}/opds
- Parses both navigation feeds (catalog links) and acquisition feeds
(downloadable books)
- Maintains navigation history stack for back navigation
- Handles absolute paths in OPDS links correctly (e.g.,
/books/opds/navcatalog/...)
- Downloads EPUBs directly to the SD card root
Note
The server URL should be typed to include https:// if the server
requires it - HTTP→HTTPS redirects may cause SSL errors on ESP32.
## Additional Context
* I also changed the home titles to use uppercase for each word and
added a setting to change the size of the side margins
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
Added a setting to select `fit` or `crop` for cover image on sleep
screen.
Might add a `expand` feature in the future that does not crop but rather
fills the blank space with a mirror of the image.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
* This PR adds a setting to control the top left and right margins of
the reader screen in 4 sizes (5, 10, 20, 40 pt?) and defaults to `SMALL`
which is equivalent to the fixed margin of 5 that was already in use
before.
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Fixes a bug in the settings menu, where previously wrap-around only
worked when scrolling upwards. Now, scrolling downwards on the last list
element wraps around to the top as expected.
Resolves#236.
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: ratedcounsel <hello@ratedcounsel.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
This PR refactors the semantic version comparison logic used during OTA
update checks.
Memory stats before :
RAM: [=== ] 30.8% (used 101068 bytes from 327680 bytes)
Flash: [========= ] 85.7% (used **5617830** bytes from 6553600 bytes)
Memory stats before :
RAM: [=== ] 30.8% (used 101068 bytes from 327680 bytes)
Flash: [========= ] 85.7% (used **5616870** bytes from 6553600 bytes)
* **What changes are included?**
Replaced std::string::substr() and std::stoi() based parsing with a
lightweight, heap-free approach.
Version parsing is now done in a single pass without creating temporary
std::string objects.
Behavior remains identical: versions are still compared as
MAJOR.MINOR.PATCH.
## Additional Context
`std::string::substr() ` creates a new string and performs heap
allocation
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
## Summary
This adds the correctly styled button hints to the keyboard screen as
well as the ability to add hints to the side buttons (and up/down hints
to that screen)
## Additional Context
N/A
## Summary
* **What is the goal of this PR?** Add EPUB 3 support by implementing
native navigation document (nav.xhtml) parsing with NCX fallback,
addressing issue Fixes: #143.
* **What changes are included?**
- New `TocNavParser` for parsing EPUB 3 HTML5 navigation documents
(`<nav epub:type="toc">`)
- Detection of nav documents via `properties="nav"` attribute in OPF
manifest
- Fallback logic: try EPUB 3 nav first, fall back to NCX (EPUB 2) if
unavailable
- Graceful degradation: books without any TOC now load with a warning
instead of failing
## Additional Context
* The implementation follows the existing streaming XML parser pattern
using Expat to minimize RAM usage on the ESP32-C3
* EPUB 3 books that include both nav.xhtml and toc.ncx will prefer the
nav document (per EPUB 3 spec recommendation)
* No breaking changes - existing EPUB 2 books continue to work as before
* Tested on examples from
https://idpf.github.io/epub3-samples/30/samples.html
## Summary
* **What is the goal of this PR?**
Add a new user setting for paragraph alignment, instead of hard-coding
full justification.
* **What changes are included?**
One new line in the settings screen, with 4 options
(justify/left/center/right). Default is justified since that's what it
was already. I personally only wanted to disable justification and use
"left", but I included the other options for completeness since they
were already supported.
## Additional Context
Tested on my X4 and looks as expected for each alignment.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* **What is the goal of this PR?** Fixes a bug -
https://github.com/daveallie/crosspoint-reader/issues/187 - where the
screen would freeze after entering a WiFi password, causing the device
to appear hung.
* **What changes are included?**
- Fixed a race condition in `WifiSelectionActivity::displayTaskLoop()`
that caused rendering of an empty screen when transitioning from the
keyboard subactivity
- Added `vTaskDelay()` when a subactivity is active to prevent CPU
starvation from a tight `continue` loop
- Added a check to skip rendering when in `PASSWORD_ENTRY` state,
allowing the state machine to properly transition to `CONNECTING` before
the display updates
## Additional Context
* **Root cause:** When the keyboard subactivity exited after password
entry, the display task would wake up and attempt to render. However,
the `state` was still `PASSWORD_ENTRY` (before `attemptConnection()`
changed it to `CONNECTING`), and since there was no render case for
`PASSWORD_ENTRY`, the display would show a cleared/empty buffer,
appearing frozen.
* **Performance implications:** The added `vTaskDelay(10)` calls when
subactivity is active or in `PASSWORD_ENTRY` state actually improve
performance by preventing CPU starvation - previously the display task
would spin in a tight loop with `continue` while a subactivity was
present.
* **Testing focus:** Test the full WiFi connection flow:
1. Enter network selection
2. Select a network requiring a password
3. Enter password and press OK
4. Verify "Connecting..." screen appears
5. Verify connection completes and prompts to save password
## Summary
* **What is the goal of this PR?** Fixes#199 - Device falls asleep
during WiFi file transfer after 10 minutes of inactivity, disconnecting
the web server.
* **What changes are included?**
- Add `preventAutoSleep()` virtual method to `Activity` base class
- Modify main loop to reset inactivity timer when `preventAutoSleep()`
returns true
- Override `preventAutoSleep()` in `CrossPointWebServerActivity`
(returns true when web server running)
- Override `preventAutoSleep()` in `OtaUpdateActivity` (returns true
during update check/download)
## Additional Context
* The existing `skipLoopDelay()` method controls loop timing (yield vs
delay) for HTTP responsiveness. The new `preventAutoSleep()` method is
semantically separate - it explicitly signals that an activity should
keep the device awake.
* `CrossPointWebServerActivity` uses both methods: `skipLoopDelay()` for
responsive HTTP handling, `preventAutoSleep()` for staying awake.
* `OtaUpdateActivity` only needs `preventAutoSleep()` since the OTA
library handles HTTP internally.
## Summary
* Replace book and section bin format images with ImHex hexpat
definition
* This should give readers an understanding of the file format but also
supply some utility when validating content/output
## Summary
* Update EpdFontFamily::Style to be u8 instead of u32 (saving 3 bytes
per word)
* Update layout width/height to be u16 from int
* Update page element count to be u16 from u32
* Update text block element count to be u16 from u32
* Bumped section bin version to version 8
## Summary
- Update the button hints on the OTA update screen to reflect the
current front button layout.
- Update user guide to reflect current available settings. A lot has
been added recently!
## Summary
* **What is the goal of this PR?**
Fix file browser failing to navigate into subdirectories with non-ASCII
(Korean/Unicode) folder names.
* **What changes are included?**
- Enable UTF-8 long file names in SdFat (`USE_UTF8_LONG_NAMES=1`)
- Add directory validation before iterating files
- Add `rewindDirectory()` call for stability
## Additional Context
## Summary
* Move home screen battery indicator to avoid clashing with button hints
* Default button mapping was fine, but others clashes with the indicator
## Summary
* Swap from Aleo to Bookerly for wider glyph support
* Swap from Space Grotesk to a small Noto Sans
## Additional Context
* 0.11.0 swapped to Aleo which has a few issues (things like Cyrillic
support for eg)
## Summary
* Redesigned home screen with big option to continue reading and
slightly nicer options to navigate to core sections
* Attempt to use the cached EPUB details (title, author) if they exist,
otherwise fall back to file name
* Adjusted button hints on home screen, removed Back option and changed
left/right to up/down
## Additional Context
* Core of this work comes from @ChandhokTannay in
https://github.com/ChandhokTannay/crosspoint-reader/commit/1d36a86ef1f016e796ef993c14fb1f9ea2f0101d
This parses the guide section in the content.opf for text/start
references and jumps to this on first open of the book.
Currently, this behavior will be repeated in case the reader manually
jumps to Chapter 0 and then re-opens the book. IMO, this is an
acceptable edge case (for which I couldn't see a good fix other than to
drag a "first open" boolean around).
---------
Co-authored-by: Sam Davis <sam@sjd.co>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Add setting for line spacing to adjust space between lines
* Aleo is already a bit tighter than Noto Sans and Open Dyslexic, so
have adjusted the values to match, this can be tweaked in the future
## Summary
* Show previous title for unnamed spines
* The spec is a little unclear, but there are plenty of cases where
chapters are split up in parts and should show the previous chapter's
title
* List TOC items instead of spine items in chapter select
* Bump `BOOK_CACHE_VERSION` to `2` to force regeneration of spine item's
TOC indexes
## Summary
* Swap to updated SDCardManager which uses SdFat
* Add exFAT support
* Swap to using FsFile everywhere
* Use newly exposed `SdMan` macro to get to static instance of
SDCardManager
* Move a bunch of FsHelpers up to SDCardManager
## Summary
- **What is the goal of this PR?** Add chapter selection support to the
XTC reader activity, including parsing chapter metadata from XTC files.
- **What changes are included?** Implemented XTC chapter parsing and
exposure in the XTC library, added a chapter selection activity for XTC,
integrated it into XtcReaderActivity, and normalized chapter page
indices by shifting them to 0-based.
## Additional Context
- The reader uses 0-based page indexing (first page = 0), but the XTC
chapter table appears to be 1-based (first page = 1), so chapter
start/end pages are shifted down by 1 during parsing.
## Summary
**What is the goal of this PR?**
Adds a setting to swap the front buttons. The default functionality are:
Back/Confirm/Left/Right. When this setting is enabled they become:
Left/Right/Back/Confirm. This makes it more comfortable to use when
holding in your right hand since your thumb can more easily rest on the
next button. The original firmware has a similar setting.
**What changes are included?**
- Add the new setting.
- Create a mapper to dynamically switch the buttons based on the
setting.
- Use mapper on the various activity screens.
- Update the button hints to reflect the swapped buttons.
## Additional Context
Full disclosure: I used Codex CLI to put this PR together, but did
review it to make sure it makes sense.
Also tested on my device:
https://share.cleanshot.com/k76891NY
## Summary
* Consolidate chapter page data into single file
* Header structure of the file stays the same, following the page count,
we now put a LUT offset
* The page data is all then appended to this file
* Finally the LUT is appended to the end of the file, and the page count
is updated
* This will also significantly improve the duration of cache cleanup
which takes a while to scan the directory and cleanup content
* Remove page file version as it's all tied up into the section file now
* Bumped section file version to 7
* Moved section content into sub directory
* Updated docs
## Additional Context
* Benchmarks:
* Generating 74 pages of content from a chapter in Jade Legacy took:
* master: 6,229ms
* this PR: 1,305ms
* Speedup of 79%
* Generating 207 pages of content from Livesuit book:
* With progress bar UI updates:
* master: 24,250ms
* this PR: 8,063ms
* Speedup of 67%
* Without progress bar UI updates:
* master: 13,055ms
* this PR: 3,600ms
* Speedup of 72%
## Summary
* **What is the goal of this PR?**
Add support for XTC (XTeink X4 native) ebook format, which contains
pre-rendered 480x800 1-bit bitmap pages optimized for e-ink displays.
* **What changes are included?**
- New `lib/Xtc/` library with XtcParser for reading XTC files
- XtcReaderActivity for displaying XTC pages on e-ink display
- XTC file detection in FileSelectionActivity
- Cover BMP generation from first XTC page
- Correct XTG page header structure (22 bytes) and bit polarity handling
## Additional Context
- XTC files contain pre-rendered bitmap pages with embedded status bar
(page numbers, progress %)
- XTG page header: 22 bytes (magic + dimensions + reserved fields +
bitmap size)
- Bit polarity: 0 = black, 1 = white
- No runtime text rendering needed - pages display directly on e-ink
- Faster page display compared to EPUB since no parsing/rendering
required
- Memory efficient: loads one page at a time (48KB per page)
- Tested with XTC files generated from https://x4converter.rho.sh/
- Verified correct page alignment and color rendering
- Please report any issues if you test with XTC files from other
sources.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Use font ascender height for baseline offset
* Previously was using font height, but when rendering the font (even
from y = 0), there would be a lot of top margin
* Font would also go below the "bottom of the line" as we were using the
full font height as the baseline
## Additional Context
* This caused some text to move around, I've fixed everything I can
* Notably it moves the first line of font a little closer to the top of
the page
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Fix underscore on keyboard
* Remove special handling of special row characters
* Fix navigating between special row items
* Standardize keyboard activity to use standard loop
* Fix issue with rendering keyboard non-stop
Fixes https://github.com/daveallie/crosspoint-reader/issues/131
## Summary
* **What is the goal of this PR?**
Improve reliability and user experience during chapter indexing by
adding retry logic for SD card operations and a visual progress bar.
* **What changes are included?**
- **Retry logic**: Add 3 retry attempts with 50ms delay for ZIP to SD
card streaming to handle timing issues after display refresh
- **Progress bar**: Display a visual progress bar (0-100%) during
chapter indexing based on file read progress, updating every 10% to
balance responsiveness with e-ink display limitations
## Additional Context
* **Problem observed**: When navigating quickly through books with many
chapters (before chapter titles finish rendering), the "Indexing..."
screen would appear frozen. Checking the serial log revealed the
operation had silently failed, but the UI showed no indication of this.
Users would likely assume the device had crashed. Pressing the next
button again would resume operation, but this behavior was confusing and
unexpected.
* **Solution**:
- Retry logic handles transient SD card timing failures automatically,
so users don't need to manually retry
- Progress bar provides visual feedback so users know indexing is
actively working (not frozen)
* **Why timing issues occur**: After display refresh operations, there
can be timing conflicts when immediately starting SD card write
operations. This is more likely to happen when rapidly navigating
through chapters.
* **Progress bar design**: Updates every 10% to avoid excessive e-ink
refreshes while still providing meaningful feedback during long indexing
operations (especially for large chapters with CJK characters).
* **Performance**: Minimal overhead - progress calculation is simple
byte counting, and display updates use `FAST_REFRESH` mode.
Add setting toggle that allows status bar display options in EpubReader.
Supported options would be as follows:
- FULL: display as is today
- PROGRESS: display progress bar only
- BATTERY: display battery only
- NONE: hide status bar
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
Replace simple threshold-based grayscale quantization with ordered
dithering using a 4x4 Bayer matrix. This eliminates color banding
artifacts and produces smoother gradients on e-ink display.
* **What changes are included?**
- Add 4x4 Bayer dithering matrix for 16-level threshold patterns
- Modify `grayscaleTo2Bit()` function to accept pixel coordinates and
apply position-based dithering
- Replace simple `grayscale >> 6` threshold with ordered dithering
algorithm that produces smoother gradients
## Additional Context
* Bayer matrix approach: The 4x4 Bayer matrix creates a repeating
pattern that distributes quantization error spatially, effectively
simulating 16 levels of gray using only 4 actual color levels (black,
dark gray, light gray, white).
* Cache invalidation: Existing cached `cover.bmp` files will need to be
deleted to see the improved rendering, as the converter only runs when
the cache is missing.
## Summary
In using my build of
https://github.com/daveallie/crosspoint-reader/pull/130 I realized that
we need a "open" button hint above the second button in the File browser
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
## Summary
* **What is the goal of this PR?** Fixes a bug where text disappears
after approximately 25 pages in long chapters during EPUB indexing.
* **What changes are included?**
- Removed the `MAX_LINES = 1000` hard limit in
`ParsedText::computeLineBreaks()`
- Added safer infinite loop prevention by checking if `nextBreakIndex <=
currentWordIndex` and forcing advancement by one word when stuck
## Additional Context
* **Root cause:** The `MAX_LINES = 1000` limit was introduced to prevent
infinite loops, but it truncates content in long chapters. For example,
a 93KB chapter that generates ~242 pages (~9,680 lines) gets cut off at
~1000 lines, causing blank pages after page 25-27.
* **Solution approach:** Instead of a hard line limit, I now detect when
the line break algorithm gets stuck (when `nextBreakIndex` doesn't
advance) and force progress by moving one word at a time. This preserves
the infinite loop protection while allowing all content to be rendered.
* **Testing:** Verified with a Korean EPUB containing a 93KB chapter -
all 242 pages now render correctly without text disappearing.
Using QRCode library from pio to generate the QR code.
Done:
- Display QR code for URL in network mode
- minor fixes of layout
- Display QR for URL in AP mode
- Display QR for AP in AP mode
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
Add a "Continue Reading" feature to improve user experience when
returning to a previously opened book.
* **What changes are included?**
- Add dynamic "Continue: <book name>" menu item in Home screen when a
book was previously opened
- File browser now starts from the folder of the last opened book
instead of always starting from root directory
- Menu dynamically shows 3 or 4 items based on reading history:
- Without history: `Browse`, `File transfer`, `Settings`
- With history: `Continue: <book>`, `Browse`, `File transfer`,
`Settings`
## Additional Context
* This feature leverages the existing `APP_STATE.openEpubPath` which
already persists the last opened book path
* The Continue Reading menu only appears if the book file still exists
on the SD card
* Book name in the menu is truncated to 25 characters with "..." suffix
if too long
* If the last book's folder was deleted, the file browser gracefully
falls back to root directory
* No new dependencies or significant memory overhead - reuses existing
state management
## Summary
This creates a `renderer.drawButtonHints` to make all of the "hints"
over buttons to match the home screen.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
Replace linear O(n) search with binary search O(log n) for unicode
interval lookup. Korean fonts have many intervals (~30,000+ glyphs), so
this improves text rendering performance during page navigation.
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
Replace linear `O(n)` glyph lookup with binary search `O(log n)` to
improve text rendering performance during page navigation.
* **What changes are included?**
- Modified `EpdFont::getGlyph()` to use binary search instead of linear
search for unicode interval lookup
- Added early return for empty interval count
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
- Performance implications: Fonts with many unicode intervals benefit
the most. Korean fonts have ~30,000+ glyphs across multiple intervals,
but any font with significant glyph coverage (CJK, extended Latin,
emoji, etc.) will see improvement.
- Complexity: from `O(n)` to `O(log n)` where n = number of unicode
intervals. For fonts with 10+ intervals, this reduces lookup iterations
significantly.
- Risk: Low - the binary search logic is straightforward and the
intervals are already sorted by unicode codepoint (required for the
original early-exit optimization).
## Summary
* Use single unified cache file for book spine, table of contents, and
core metadata (title, author, cover image)
* Use new temp item store file in OPF parsing to store items to be
rescaned when parsing spine
* This avoids us holding these items in memory
* Use new toc.bin.tmp and spine.bin.tmp to build out partial toc / spine
data as part of parsing content.opf and the NCX file
* These files are re-read multiple times to ultimately build book.bin
## Additional Context
* Spec for file format included below as an image
* This should help with:
* #10
* #60
* #99
## Summary
* Prevent SD card error causing boot loop
* We need the screen and fonts to be initialized to show the full screen
error message
* Prior to this change, trying to render the font would crash the
firmware and boot loop it
## Summary
* Handle 16x16 MCU blocks in JPEG decoding
* We were only correctly handling 8x8 blocks, which means that we did
not correctly support a lot of JPGs leading to an interlacing style on
the images
## Additional Context
* Fixes https://github.com/daveallie/crosspoint-reader/issues/118
## Summary
* **What is the goal of this PR?** Adds WiFi Access Point (AP) mode
support for File Transfer, allowing the device to create its own WiFi
network that users can connect to directly - useful when no existing
WiFi network is available. And in my experience is faster when the
device is right next to your laptop (but maybe further from your wifi)
* **What changes are included?**
- New `NetworkModeSelectionActivity` - an interstitial screen asking
users to choose between:
- "Join a Network" - connects to an existing WiFi network (existing
behavior)
- "Create Hotspot" - creates a WiFi access point named
"CrossPoint-Reader"
- Modified `CrossPointWebServerActivity` to:
- Launch the network mode selection screen before proceeding
- Support starting an Access Point with mDNS (`crosspoint.local`) and
DNS server for captive portal behavior
- Display appropriate connection info for both modes
- Modified `CrossPointWebServer` to support starting when WiFi is in AP
mode (not just STA connected mode)
## Additional Context
* **AP Mode Details**: The device creates an open WiFi network named
"CrossPoint-Reader". Once connected, users can access the file transfer
page at `http://crosspoint.local/` or `http://192.168.4.1/`
* **DNS Captive Portal**: A DNS server redirects all domain requests to
the device's IP, enabling captive portal behavior on some devices
* **mDNS**: Hostname resolution via `crosspoint.local` is enabled for
both AP and STA modes
* **No breaking changes**: The "Join a Network" option preserves the
existing WiFi connection flow
* **Memory impact**: Minimal - the AP mode uses roughly the same
resources as STA mode
## Summary
* Adds support for OTA
* Gets latest firmware bin from latest GitHub release
* I have noticed it be a little flaky unpacking the JSON and
occasionally failing to start
## Summary
* HTML files are now static, streamed directly to the client without
modification
* For any dynamic values, load via JSON APIs
* For files page, we stream the JSON content as we scan the directory to
avoid holding onto too much data
## Additional details
* We were previously building up a very large string all generated on
the X4 directly, we should be leveraging the browser
* Fixes https://github.com/daveallie/crosspoint-reader/issues/94
Improves the duration for which the power button needs to be held - see
#53.
I left the measurement code for the calibration value in, as it will
likely change if we move the settings to NVS.
## Summary
* Give activities name and log when entering and exiting them
* Clearer logs when attempting to debug, knowing where users are coming
from/going to helps
## Summary
* Swap from `wasReleased` to `isPressed` when checking power button
duration
* In practice it makes the power down experience feel a lot snappier
* Remove the unnecessary 1000ms delay when powering off
## Additional Context
* A little discussion in here:
https://github.com/daveallie/crosspoint-reader/discussions/53#discussioncomment-15309707
## Summary
* adds cyrillic glyphs to pixel arial font, used as Small font in UI
## Additional Context
* with recent changes pixel arial font lost cyrillic glyphs
## Summary
* Fix incorrect justification of last line in paragraph
* `words` is changing size due to the slice, so `isLastLine` would
rarely be right, either removing justification mid-paragraph, or
including it in the last line.
## Additional Context
* Introduced in #73
## Summary
* Unset openEpubPath on boot and set once epub fully loaded
## Additional Context
* If an epub was crashing when loading, it was possible to get the
device stuck into a loop. There was no way to get back to the home
screen as we'd always load you back into old epub
* Break this loop by clearing the stored value when we boot, still
jumping to the last open epub, but only resetting that value once the
epub has been fully loaded
## Summary
- Add basic JPG image support
- Map JPG back to 2-bit BMP output
- Can be used to later render the BMP file from disk or directly pass to
output if wanted
- Give the 3 passes over the data needed to render grayscale content,
putting it on disk is preferred to outputting it multiple times
## Additional Context
- WIP, looking forward to BMP support from
https://github.com/daveallie/crosspoint-reader/pull/16
- Addresses some of #11
## Summary
* Paginate book list
* Avoid out of bounds rendering of long book titles, truncate with
ellipsis instead
## Additional Context
* Should partially help with
https://github.com/daveallie/crosspoint-reader/issues/75 as it was
previously rendering a lot of content off screen, will need to test with
a large directory
## Summary
* Extract EPUB TOC into temp file before parsing
* Streaming ZIP -> XML parser uses up a lot of memory as we're
allocating inflation buffers while also holding a few copies of the
buffer in different forms
* Instead, but streaming the inflated file down to the SD card (like we
do for HTML parsing, we can lower memory usage)
## Additional Context
* This should help with
https://github.com/daveallie/crosspoint-reader/issues/60 and
https://github.com/daveallie/crosspoint-reader/issues/10. It won't
remove those class of issues completely, but will allow for many more
books to be opened.
Still a bit raw, but gets the time required to determine the size of
each chapter (for reading progress) down from ~25ms to 0-1ms.
This is done by keeping the zipArchive open (so simple ;)).
Probably we don't need to cache the spine sizes anymore then...
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Build out lines for pages when holding over 750 buffered words
* Should fix issues with parsing long blocks of text causing memory
crashes
## Problem
`drawBmp()` allocates two row buffers via `malloc()` but doesn't check
if allocations succeed. On low memory, this causes a crash when the NULL
pointers are dereferenced.
## Fix
Add NULL check after both `malloc()` calls. If either fails, log error
and return early.
Changed `lib/GfxRenderer/GfxRenderer.cpp`.
## Test
- Defensive addition only - no logic changes
- Manual device testing appreciated
## Problem
Three Epub getter functions can throw exceptions:
- `getCumulativeSpineItemSize()`: No bounds check before
`.at(spineIndex)`
- `getSpineItem()`: If spine is empty and index invalid, `.at(0)` throws
- `getTocItem()`: If toc is empty and index invalid, `.at(0)` throws
## Fix
- Add bounds check to `getCumulativeSpineItemSize()`, return 0 on error
- Add empty container checks to `getSpineItem()` and `getTocItem()`
- Use static fallback objects for safe reference returns on empty
containers
Changed `lib/Epub/Epub.cpp`.
## Test
- Defensive additions - follows existing bounds check patterns
- No logic changes for valid inputs
- Manual device testing appreciated
## Problem
`readFileToMemory()` allocates an output buffer via `malloc()` at line
120 but doesn't check if allocation succeeds. On low memory, the NULL
pointer is passed to `fread()` causing a crash.
## Fix
Add NULL check after `malloc()` for the output buffer. Follows the
existing pattern already used for `deflatedData` at line 141.
Changed `lib/ZipFile/ZipFile.cpp`.
## Test
- Follows existing validated pattern from same function
- Defensive addition only - no logic changes
## Problem
`invertScreen()`, `storeBwBuffer()`, and `restoreBwBuffer()` dereference
`frameBuffer` without NULL validation. If the display isn't initialized,
these functions will crash.
## Fix
Add NULL checks before using `frameBuffer` in all three functions.
Follows the existing pattern from `drawPixel()` (line 11) which already
validates the pointer.
Changed `lib/GfxRenderer/GfxRenderer.cpp`.
## Test
- Follows existing validated pattern from `drawPixel()`
- No logic changes - only adds early return on NULL
- Manual device testing appreciated
## Summary
- **What is the goal of this PR?**
Implements wireless EPUB file management via a built-in web server,
enabling users to upload, browse, organize, and delete EPUB files from
any device on the same WiFi network without needing a computer cable
connection.
- **What changes are included?**
- **New Web Server**
([`CrossPointWebServer.cpp`](src/CrossPointWebServer.cpp),
[`CrossPointWebServer.h`](src/CrossPointWebServer.h)):
- HTTP server on port 80 with a responsive HTML/CSS interface
- Home page showing device status (version, IP, free memory)
- File Manager with folder navigation and breadcrumb support
- EPUB file upload with progress tracking
- Folder creation and file/folder deletion
- XSS protection via HTML escaping
- Hidden system folders (`.` prefixed, "System Volume Information",
"XTCache")
- **WiFi Screen** ([`WifiScreen.cpp`](src/screens/WifiScreen.cpp),
[`WifiScreen.h`](src/screens/WifiScreen.h)):
- Network scanning with signal strength indicators
- Visual indicators for encrypted (`*`) and saved (`+`) networks
- State machine managing: scanning, network selection, password entry,
connecting, save/forget prompts
- 15-second connection timeout handling
- Integration with web server (starts on connect, stops on exit)
- **WiFi Credential Storage**
([`WifiCredentialStore.cpp`](src/WifiCredentialStore.cpp),
[`WifiCredentialStore.h`](src/WifiCredentialStore.h)):
- Persistent storage in `/sd/.crosspoint/wifi.bin`
- XOR obfuscation for stored passwords (basic protection against casual
reading)
- Up to 8 saved networks with add/remove/update operations
- **On-Screen Keyboard**
([`OnScreenKeyboard.cpp`](src/screens/OnScreenKeyboard.cpp),
[`OnScreenKeyboard.h`](src/screens/OnScreenKeyboard.h)):
- Reusable QWERTY keyboard component with shift support
- Special keys: Shift, Space, Backspace, Done
- Support for password masking mode
- **Settings Screen Integration**
([`SettingsScreen.h`](src/screens/SettingsScreen.h)):
- Added WiFi action to navigate to the new WiFi screen
- **Documentation** ([`docs/webserver.md`](docs/webserver.md)):
- Comprehensive user guide covering WiFi setup, web interface usage,
file management, troubleshooting, and security notes
- See this for more screenshots!
- Working "displays the right way in GitHub" on my repo:
https://github.com/olearycrew/crosspoint-reader/blob/feature/connect-to-wifi/docs/webserver.md
**Video demo**
https://github.com/user-attachments/assets/283e32dc-2d9f-4ae2-848e-01f41166a731
## Additional Context
- **Security considerations**: The web server has no
authentication—anyone on the same WiFi network can access files. This is
documented as a limitation, recommending use only on trusted private
networks. Password obfuscation in the credential store is XOR-based, not
cryptographically secure.
- **Memory implications**: The web server and WiFi stack consume
significant memory. The implementation properly cleans up (stops server,
disconnects WiFi, sets `WIFI_OFF` mode) when exiting the WiFi screen to
free resources.
- **Async operations**: Network scanning and connection use async
patterns with FreeRTOS tasks to prevent blocking the UI. The display
task handles rendering on a dedicated thread with mutex protection.
- **Browser compatibility**: The web interface uses standard
HTML5/CSS3/JavaScript and is tested to work with all modern browsers on
desktop and mobile.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
Adresses #53
Please check if we still need the code to "Give the user up to 1000ms to
start holding the power button, and must hold for
SETTINGS.getPowerButtonDuration()" - the power button should be pressed
already when waking up...
Also, decided to return before the delay to wait more to make the
behavior more immediate.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Problem
Three `fopen()` calls in ZipFile.cpp did not check for NULL before using
the file handle. If files cannot be opened, `fseek`/`fread`/`fclose`
receive NULL and crash.
## Fix
Added NULL checks with appropriate error logging and early returns for
all three locations:
- `getDataOffset()`
- `readFileToMemory()`
- `readFileToStream()`
## Testing
- Builds successfully with `pio run`
- Affects: `lib/ZipFile/ZipFile.cpp`
## Problem
- `getBookSize()` calls `getCumulativeSpineItemSize(getSpineItemsCount()
- 1)` which passes -1 when spine is empty
- `calculateProgress()` then divides by zero when book size is 0
## Fix
- Return 0 from `getBookSize()` if spine is empty
- Return 0 from `calculateProgress()` if book size is 0
## Testing
- Builds successfully with `pio run`
- Affects: `lib/Epub/Epub.cpp`
## Problem
Reading progress.bin used `SD.exists()` then `SD.open()` without
checking if open succeeded. Race conditions or SD errors could cause
file handle to be invalid.
## Fix
- Removed redundant `SD.exists()` check
- Check if file opened successfully before reading
- Verify correct number of bytes were read
## Testing
- Builds successfully with `pio run`
- Affects: `src/activities/reader/EpubReaderActivity.cpp`
## Problem
`SD.begin()` return value was ignored. If the SD card fails to
initialize, the device continues and crashes when trying to load
settings/state.
## Fix
Check return value and display "SD card error" message instead of
proceeding with undefined state.
## Testing
- Builds successfully with `pio run`
- Affects: `src/main.cpp`
## Problem
The status bar title truncation loop crashes when the chapter title is
shorter than 8 characters.
```cpp
// title.length() - 8 underflows when length < 8 (size_t is unsigned)
title = title.substr(0, title.length() - 8) + "...";
```
## Fix
Added a length guard to skip truncation for titles that are too short to
truncate safely.
## Testing
- Builds successfully with `pio run`
- Affects: `src/activities/reader/EpubReaderActivity.cpp`
## Problem
`getSpineIndexForTocIndex()` and `getTocIndexForSpineIndex()` access
`toc[tocIndex]` and `spine[spineIndex]` without validating indices are
within bounds. Malformed EPUBs or edge cases could trigger out-of-bounds
access.
## Fix
Added bounds validation at the start of both functions before accessing
the arrays.
## Testing
- Builds successfully with `pio run`
- Affects: `lib/Epub/Epub.cpp`
## Summary
* Previously, only pure black pixels in the font were marked as black,
this expands the black range, and makes the lightest pixels white
## Additional Context
* Noticed personally it was kind of "thin" and washed out a bit, this
massively helps, should also address concerns raised here:
https://github.com/daveallie/crosspoint-reader/discussions/39
## Summary
* This PR drastically reshapes the structure of the codebase, moving
from the concept of "Screens" to "Activities", restructing the files and
setting up the concept of subactivities.
* This should help with keep the main file clean and containing all
functional logic in the relevant activity.
* CrossPointState is now also a global singleton which should help with
accessing it from within activities.
## Additional Context
* This is probably going to be a bit disruptive for people with open
PRs, sorry 😞
## Summary
* Rely on media-type="application/x-dtbncx+xml" to find TOC instead of
hardcoded values
## Additional Context
* Most of my epubs don't have id==ncx for toc file location. I think
this media-type is EPUB standard
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
- When allocating the `bwBuffer` required to restore the RED RAM in the
EPD, we were previously allocating the whole frame buffer in one
contiguous memory chunk (48kB)
- Depending on the state of memory fragmentation at the time of this
call, it may not be possible to allocate all that memory
- Instead, we now allocate 6 blocks of 8kB instead of the full 48kB,
this should mean the display updates are more resilient to different
memory conditions
## Additional Context
* add horizontal indent in first line of paragraph in case Extra Paragraph Spacing is OFF
* Treat tabs as whitespace (so they are properly stripped)
* Changed size of indent to 1 em.
* Fixed calculation of space when indenting (avoiding squeezed text).
* Source code formatting
* Enhance TOC parsing and chapter selection logic
- Update .gitignore to include additional paths
- Refactor Epub::parseContentOpf to improve NCX item retrieval
- Modify ContentOpfParser to store media type in ManifestItem
- Implement rebuildVisibleSpineIndices in EpubReaderChapterSelectionScreen for better chapter navigation
- Adjust rendering logic to handle empty chapter lists gracefully
* Refactor TOC parsing logic to streamline cover image and NCX item retrieval
* add cyrillic ranges
* revert
* clang format fix
* white sleep screen
* quicker pwr button
* no extra spacing between paragraphs
* Added settings class with de/serialization and whiteSleepScreen setting to control inverting the sleep screen
* Added Settings screen for real, made settings a global singleton
* Added setting for extra paragraph spacing.
* fixed typo
* Rework after feedback
* Fixed type from bool to uint8
Added Github templates for PRs and bugs
Also added one for funding, please do not feel obligated to
donate to the project, this is not a for-profit endevour, I
just had someone ask where they could send a few dollars so
I have set it up
* First pass at moving to SDK EInkDisplay library
* Add 2-bit grayscale text and anti-aliased rendering of text
* Render status bar for empty chapters
* Refresh screen every 15 pages to avoid ghosting
* Simplify boot and sleep screens
* Give FileSelectionScreen task more stack memory
* Move text around slightly on Boot and Sleep screens
* Re-use existing buffer and write to whole screen for 'partial update'
* Add expat and swap out ERB HTML parser
* Increase EpubHtmlParserSlim file buffer to 1024 bytes
* Cleanup TextBlock functions
* Do not break words when leaving spans
@@ -6,10 +6,7 @@ Built using **PlatformIO** and targeting the **ESP32-C3** microcontroller.
CrossPoint Reader is a purpose-built firmware designed to be a drop-in, fully open-source replacement for the official
Xteink firmware. It aims to match or improve upon the standard EPUB reading experience.
// TODO include some images
I look at the [**diy-esp32-epub-reader** by atomic14](https://github.com/atomic14/diy-esp32-epub-reader) project a lot
when making CrossPoint and a handful of lessons and some direct source code comes directly from that repo.
## Motivation
@@ -26,18 +23,54 @@ CrossPoint Reader aims to:
This project is **not affiliated with Xteink**; it's built as a community project.
## Features
## Features & Usage
- [x] EPUB parsing and rendering
- [x] Saved reading position
- [ ] File explorer with file picker
- Currently CrossPoint will just open the first EPUB it finds at the root of the SD card
- [x] EPUB parsing and rendering (EPUB 2 and EPUB 3)
- [ ] Image support within EPUB
- []Configurable font, layout, and display options
- []WiFi connectivity
- [] BLE connectivity
- [x]Saved reading position
- [x]File explorer with file picker
- [x] Basic EPUB picker from root directory
- [x] Support nested folders
- [ ] EPUB picker with cover art
- [x] Custom sleep screen
- [x] Cover sleep screen
- [x] Wifi book upload
- [x] Wifi OTA updates
- [x] Configurable font, layout, and display options
- [ ] User provided fonts
- [ ] Full UTF support
- [x] Screen rotation
## Getting Started
Multi-language support: Read EPUBs in various languages, including English, Spanish, French, German, Italian, Portuguese, Russian, Ukrainian, Polish, Swedish, Norwegian, [and more](./USER_GUIDE.md#supported-languages).
See [the user guide](./USER_GUIDE.md) for instructions on operating CrossPoint.
For more details about the scope of the project, see the [SCOPE.md](SCOPE.md) document.
## Installing
### Web (latest firmware)
1. Connect your Xteink X4 to your computer via USB-C
2. Go to https://xteink.dve.al/ and click "Flash CrossPoint firmware"
To revert back to the official firmware, you can flash the latest official firmware from https://xteink.dve.al/, or swap
back to the other partition using the "Swap boot partition" button here https://xteink.dve.al/debug.
### Web (specific firmware version)
1. Connect your Xteink X4 to your computer via USB-C
2. Download the `firmware.bin` file from the release of your choice via the [releases page](https://github.com/crosspoint-reader/crosspoint-reader/releases)
3. Go to https://xteink.dve.al/ and flash the firmware file using the "OTA fast flash controls" section
To revert back to the official firmware, you can flash the latest official firmware from https://xteink.dve.al/, or swap
back to the other partition using the "Swap boot partition" button here https://xteink.dve.al/debug.
### Manual
See [Development](#development) below.
## Development
### Prerequisites
@@ -46,13 +79,43 @@ This project is **not affiliated with Xteink**; it's built as a community projec
* USB-C cable for flashing the ESP32-C3
* Xteink X4
### Checking out the code
CrossPoint uses PlatformIO for building and flashing the firmware. To get started, clone the repository:
│ │ ├── page_0.bin # Each page is stored in a separate file, it
│ │ ├── page_1.bin #contains the position (x, y) and text for each word
│ │└── ...
│ ├── 1/
│ │ ├── section.bin
│ │ ├── page_0.bin
│ │ ├── page_1.bin
│ │ └── ...
│ └── ...
│ ├── cover.bmp # Book cover image (once generated)
│ ├── book.bin # Book metadata (title, author, spine, table of contents, etc.)
│ └── sections/ # All chapter data is stored in the sections subdirectory
│ ├── 0.bin # Chapter data (screen count, all text layout info, etc.)
│ ├── 1.bin # files are named by their index in the spine
│ └── ...
│
└── epub_189013891/
```
Deleting the `.crosspoint` directory will clear the cache.
Deleting the `.crosspoint` directory will clear the entire cache.
Due the way it's currently implemented, the cache is not automatically cleared when the EPUB is deleted and moving an
EPUB file will reset the reading progress.
Due the way it's currently implemented, the cache is not automatically cleared when a book is deleted and moving a book
file will use a new cache directory, resetting the reading progress.
For more details on the internal file structures, see the [file formats document](./docs/file-formats.md).
## Contributing
Contributions are very welcome!
If you're looking for a way to help out, take a look at the [ideas discussion board](https://github.com/crosspoint-reader/crosspoint-reader/discussions/categories/ideas).
If there's something there you'd like to work on, leave a comment so that we can avoid duplicated effort.
Everyone here is a volunteer, so please be respectful and patient. For more details on our goverance and community
principles, please see [GOVERNANCE.md](GOVERNANCE.md).
### To submit a contribution:
1. Fork the repo
@@ -104,3 +170,6 @@ Contributions are very welcome!
---
CrossPoint Reader is **not affiliated with Xteink or any manufacturer of the X4 hardware**.
Huge shoutout to [**diy-esp32-epub-reader** by atomic14](https://github.com/atomic14/diy-esp32-epub-reader), which was a project I took a lot of inspiration from as I
Button layout can be customized in **[Settings](#35-settings)**.
---
## 2. Power & Startup
### Power On / Off
To turn the device on or off, **press and hold the Power button for approximately half a second**.
In **[Settings](#35-settings)** you can configure the power button to turn the device off with a short press instead of a long one.
To reboot the device (for example if it's frozen, or after a firmware update), press and release the Reset button, and then quickly press and hold the Power button for a few seconds.
### First Launch
Upon turning the device on for the first time, you will be placed on the **[Home](#31-home-screen)** screen.
> [!NOTE]
> On subsequent restarts, the firmware will automatically reopen the last book you were reading.
---
## 3. Screens
### 3.1 Home Screen
The Home Screen is the main entry point to the firmware. From here you can navigate to **[Reading Mode](#4-reading-mode)** with the most recently read book, **[Book Selection](#32-book-selection)**, **[Settings](#35-settings)**, or the **[File Upload](#34-file-upload-screen)** screen.
### 3.2 Book Selection
The Book Selection acts as a folder and file browser.
* **Navigate List:** Use **Left** (or **Volume Up**), or **Right** (or **Volume Down**) to move the selection cursor up and down through folders and books. You can also long-press these buttons to scroll a full page up or down.
* **Open Selection:** Press **Confirm** to open a folder or read a selected book.
### 3.3 Reading Mode
See [Reading Mode](#4-reading-mode) below for more information.
### 3.4 File Upload Screen
The File Upload screen allows you to upload new e-books to the device. When you enter the screen, you'll be prompted with a WiFi selection dialog and then your X4 will start hosting a web server.
See the [webserver docs](./docs/webserver.md) for more information on how to connect to the web server and upload files.
> [!TIP]
> Advanced users can also manage files programmatically or via the command line using `curl`. See the [webserver docs](./docs/webserver.md) for details.
### 3.4.1 Calibre Wireless Transfers
CrossPoint supports sending books from Calibre using the CrossPoint Reader device plugin.
1. Install the plugin in Calibre:
- Head to https://github.com/crosspoint-reader/calibre-plugins/releases to download the latest version of the crosspoint_reader plugin.
- Download the zip file.
- Open Calibre → Preferences → Plugins → Load plugin from file → Select the zip file.
2. On the device: File Transfer → Connect to Calibre → Join a network.
3. Make sure your computer is on the same WiFi network.
4. In Calibre, click "Send to device" to transfer books.
### 3.5 Settings
The Settings screen allows you to configure the device's behavior. There are a few settings you can adjust:
- **Sleep Screen**: Which sleep screen to display when the device sleeps:
- "Dark" (default) - The default dark Crosspoint logo sleep screen
- "Light" - The same default sleep screen, on a white background
- "Custom" - Custom images from the SD card; see [Sleep Screen](#36-sleep-screen) below for more information
- "Cover" - The book cover image (Note: this is experimental and may not work as expected)
- "None" - A blank screen
- "Cover + Custom" - The book cover image, fallbacks to "Custom" behavior
- **Sleep Screen Cover Mode**: How to display the book cover when "Cover" sleep screen is selected:
- "Fit" (default) - Scale the image down to fit centered on the screen, padding with white borders as necessary
- "Crop" - Scale the image down and crop as necessary to try to to fill the screen (Note: this is experimental and may not work as expected)
- **Sleep Screen Cover Filter**: What filter will be applied to the book cover when "Cover" sleep screen is selected
- "None" (default) - The cover image will be converted to a grayscale image and displayed as it is
- "Contrast" - The image will be displayed as a black & white image without grayscale conversion
- "Inverted" - The image will be inverted as in white&black and will be displayed without grayscale conversion
- **Status Bar**: Configure the status bar displayed while reading:
- "None" - No status bar
- "No Progress" - Show status bar without reading progress
- "Full w/ Percentage" - Show status bar with book progress (as percentage)
- "Full w/ Book Bar" - Show status bar with book progress (as bar)
- "Book Bar Only" - Show book progress (as bar)
- "Full w/ Chapter Bar" - Show status bar with chapter progress (as bar)
- **Hide Battery %**: Configure where to suppress the battery pecentage display in the status bar; the battery icon will still be shown:
- "Never" - Always show battery percentage (default)
- "In Reader" - Show battery percentage everywhere except in reading mode
- "Always" - Always hide battery percentage
- **Extra Paragraph Spacing**: If enabled, vertical space will be added between paragraphs in the book. If disabled, paragraphs will not have vertical space between them, but will have first-line indentation.
- **Text Anti-Aliasing**: Whether to show smooth grey edges (anti-aliasing) on text in reading mode. Note this slows down page turns slightly.
- **Short Power Button Click**: Controls the effect of a short click of the power button:
- "Ignore" - Require a long press to turn off the device
- "Sleep" - A short press powers the device off
- "Page Turn" - A short press in reading mode turns to the next page; a long press turns the device off
- **Reading Orientation**: Set the screen orientation for reading EPUB files:
- "Portrait" (default) - Standard portrait orientation
- **Front Button Layout**: Configure the order of the bottom edge buttons:
- Back, Confirm, Left, Right (default)
- Left, Right, Back, Confirm
- Left, Back, Confirm, Right
- Back, Confirm, Right, Left
- **Side Button Layout (reader)**: Swap the order of the up and down volume buttons from Previous/Next to Next/Previous. This change is only in effect when reading.
- **Long-press Chapter Skip**: Set whether long-pressing page turn buttons skip to the next/previous chapter.
- "Chapter Skip" (default) - Long-pressing skips to next/previous chapter
- "Page Scroll" - Long-pressing scrolls a page up/down
- Swap the order of the up and down volume buttons from Previous/Next to Next/Previous. This change is only in effect when reading.
- **Reader Font Family**: Choose the font used for reading:
- "Bookerly" (default) - Amazon's reading font
- "Noto Sans" - Google's sans-serif font
- "Open Dyslexic" - Font designed for readers with dyslexia
- **Reader Font Size**: Adjust the text size for reading; options are "Small", "Medium", "Large", or "X Large".
- **Reader Line Spacing**: Adjust the spacing between lines; options are "Tight", "Normal", or "Wide".
- **Reader Screen Margin**: Controls the screen margins in reader mode between 5 and 40 pixels in 5 pixel increments.
- **Reader Paragraph Alignment**: Set the alignment of paragraphs; options are "Justified" (default), "Left", "Center", or "Right".
- **Time to Sleep**: Set the duration of inactivity before the device automatically goes to sleep.
- **Refresh Frequency**: Set how often the screen does a full refresh while reading to reduce ghosting.
- **Sunlight Fading Fix**: Configure whether to enable a software-fix for the issue where white X4 models may fade when used in direct sunlight
- "OFF" (default) - Disable the fix
- "ON" - Enable the fix
- **OPDS Browser**: Configure OPDS server settings for browsing and downloading books. Set the server URL (for Calibre Content Server, add `/opds` to the end), and optionally configure username and password for servers requiring authentication. Note: Only HTTP Basic authentication is supported. If using Calibre Content Server with authentication enabled, you must set it to use Basic authentication instead of the default Digest authentication.
- **Check for updates**: Check for firmware updates over WiFi.
### 3.6 Sleep Screen
You can customize the sleep screen by placing custom images in specific locations on the SD card:
- **Single Image:** Place a file named `sleep.bmp` in the root directory.
- **Multiple Images:** Create a `sleep` directory in the root of the SD card and place any number of `.bmp` images inside. If images are found in this directory, they will take priority over the `sleep.bmp` file, and one will be randomly selected each time the device sleeps.
> [!NOTE]
> You'll need to set the **Sleep Screen** setting to **Custom** in order to use these images.
> [!TIP]
> For best results:
> - Use uncompressed BMP files with 24-bit color depth
> - Use a resolution of 480x800 pixels to match the device's screen resolution.
---
## 4. Reading Mode
Once you have opened a book, the button layout changes to facilitate reading.
***Cyrillic Script (Standard and Extended):** Covers Russian, Ukrainian, Belarusian, Bulgarian, Serbian, Macedonian, Kazakh, Kyrgyz, Mongolian, and others.
What is not supported: Chinese, Japanese, Korean, Vietnamese, Hebrew, Arabic, Greek and Farsi.
---
## 5. Chapter Selection Screen
Accessible by pressing **Confirm** while inside a book.
1. Use **Left** (or **Volume Up**), or **Right** (or **Volume Down**) to highlight the desired chapter.
2. Press **Confirm** to jump to that chapter.
3.*Alternatively, press **Back** to cancel and return to your current page.*
---
## 6. Current Limitations & Roadmap
Please note that this firmware is currently in active development. The following features are **not yet supported** but are planned for future updates:
* **Images:** Embedded images in e-books will not render.
---
## 7. Troubleshooting Issues & Escaping Bootloop
If an issue or crash is encountered while using Crosspoint, feel free to raise an issue ticket and attach the serial monitor logs. The logs can be obtained by connecting the device to a computer and starting a serial monitor. Either [Serial Monitor](https://www.serialmonitor.org/) or the following command can be used:
```
pio device monitor
```
If the device is stuck in a bootloop, press and release the Reset button. Then, press and hold on to the configured Back button and the Power Button to boot to the Home Screen.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Jake Kenneally
Dave Allie
Xuan-Son Nguyen
Arthur Tazhitdinov
CaptainFrito
James Whyte
Luke Stein
danoob
Jonas Diemer
James Whyte
Matthías Páll Gissurarson
Maik Allgöwer
Fabio Barbon
Егор Мартынов
GenesiaW
Aaron Cunliffe
Uri Tauber
Gaspar Fabrega Ragni
Thomas Foskolos
nscheung
Eliz
Boris Faure
V
Daniel Chelling
Lalo
Alex Faria
Maeve Andrews
Boris Faure
Yaroslav
Carson Hicks
Xuan-Son Nguyen
Vincent Politzer
Justin Mitchell
Brendan O'Leary
Sam Davis
KasyanDiGris
Juan Biondi
Logan Garbarini
Kenneth
Daniel Poulter
Nathan James
Eunchurn Park
efenner
swwilshub
Armando Cerna
Will Morrow
Andrew Brandt
David Fischer
Seth
Samuel Carpentier
Stanislav Khromov
Justin
Justinian
V
Pavel Liashkov
Jake Lyell
dangson
Yona
Tannay
1991AcuraLegend
IFAKA
Brendan O'Leary
