Once a event is signaled, the corresponding struct vkd3d_waiting_event
entry is considered dead and could be overwritten, so it's not safe to
keep a pointer to it in d3d12_fence_SetEventOnCompletion(). Instead,
keep the latch bit in d3d12_fence_SetEventOnCompletion() and put a
pointer to it in struct vkd3d_waiting_event.
Fixes reflections in Control appearing with only their red component.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52146
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Pthread mandates that a mutex must be unlocked before being destroyed.
In pratice I doubt this make a difference on any platform (certainly
it doesn't on Linux), but let's comply to standards.
An unblocking Signal() on the CPU must be handled after the blocked op
is written, or the op will not be flushed until the next signal.
The device is locked while the fence is already locked, so the fence must
never be locked after locking the device. Currently this never occurs.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Otherwise the following sequence can occur:
1. A command queue is added to the blocked list during a Wait() call.
2. An unblocking Signal() occurs on the CPU in another thread, flushing the
blocked ops, but as no op has been written, the queue is removed from the
blocked list.
3. The blocked op is written.
3. Another op is queued and the queue is not re-added to the blocked
list because this only happens for the first op.
World of Warcraft triggers this issue.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
When using PE vkd3d through Wine, debug output may be swallowed by writing to
Win32 stderr. Avoid this by providing a way to hook up vkd3d log output to Wine
output.
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Strictly increasing timeline values must be mapped to fence virtual values
to avoid invalid use of Vulkan timeline semaphores. In particular, non-
increasing values and value jumps of >= 4G are permitted in d3d12.
Different virtual D3D12 command queues may map to the same Vulkan queue.
If a wait of value N is submitted on one command queue, and then a signal
for >= N is submitted on another, but they are sent to the same Vk queue,
the wait will never complete. The solution is to buffer out-of-order waits
and any subsequent queue commands until an unblocking signal value is
submitted to a different D3D12 queue, or signaled on the CPU.
Buffering out-of-order waits also fixes the old fence implementation so it
is fully functional, though a bit less efficient than timeline semaphores.
Based in part on vkd3d-proton patches by Hans-Kristian Arntzen. Unlike the
vkd3d-proton implementation, this patch does not use worker threads for
submissions to the Vulkan queue.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Order does not need to be preserved here, and another function will add
to this array when mapped timeline semaphores are implemented.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Simplifies the handling of GPU waits, and in vkd3d-proton is reported
to increase performance when support for multiple Vulkan queues is
enabled, because it avoids the problem of fences being signaled while
they sit in the pending buffer waiting to be moved to the wait buffer.
Based on a vkd3d-proton patch by Philip Rebohle.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Simplifies the preservation of fence objects until worker threads are
done with them, and will be needed when threaded queue submission is
added.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Fixes crashes in Shadow of the Tomb Raider, GRID 2019 and probably others.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
D3D12 supports signalling a fence to a lower value, while Vulkan timeline
semaphores do not. On the GPU side this is handled by simply submitting
the signal anyway, if a test for this passes on device creation, because
working around this is impractical. For CPU signals the Vulkan semaphore
is replaced with a new one at the lower value only if no waits and/or
signals are pending on the GPU. Otherwise, a fixme is emitted.
Partly based on a vkd3d-proton patch by Hans-Kristian Arntzen (not
including the handling of lower fence values).
The old implementation is used if KHR_timeline_semaphore is not
available or GPU signals do not work for a lower value.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Binding a shader with the wrong null descriptor type works in Windows. The
introduction of Vulkan-backed heaps may cause a regression in clients which
do this, because the written index will remain unpopulated in all other sets,
but a shader may access it in one of them.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This implements all remaining unsupported image view dimensions and saves
a small amount of resources because null buffers and images are no longer
needed. It matches the D3D12 requirement that all reads return zero,
which is not strictly true of the existing implementation using resources
of small but non-zero size. Warnings on null view creation are silenced
because there should no longer be a difference from D3D12 behaviour.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The pointer is never NULL.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Improves performance in Control, which copies large numbers of descriptors
per frame where often only ~10% are not identical.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Source descriptors are copied to separate arrays to facilitate use of
pre-initialised Vulkan structures, and allow arrayed writes where
possible.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
