Fix for linting.

Switch to PyPi trusted publisher.

.github/workflows/default.yml

@@ -1,36 +0,0 @@
-name: Build Documentation
-
-on:
-  push:
-    branches:
-      - master
-
-jobs:
-  build:
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        persist-credentials: false
-    # Standard drop-in approach that should work for most people.
-    - uses: ammaraskar/sphinx-action@master
-      env:
-        PYTHONPATH: .
-      with:
-        pre-build-command: "apt-get update -y && apt-get install -y libgl1-mesa-glx && cp stubs/2.4.0/mobase.pyi docs/mobase.py"
-        docs-folder: "docs/"
-
-    - name: Install SSH Client 🔑
-      uses: webfactory/ssh-agent@v0.4.1
-      with:
-        ssh-private-key: ${{ secrets.DEPLOY_KEY }}
-
-    - name: Deploy 🚀
-      uses: JamesIves/github-pages-deploy-action@3.7.1
-      with:
-        SSH: true
-        REPOSITORY_NAME: ModOrganizer2/python-plugins-doc
-        BRANCH: master
-        FOLDER: docs/build/html

.github/workflows/documentation.yml

@@ -0,0 +1,39 @@
+name: Build Documentation
+
+on:
+  pull_request:
+  push:
+    branches:
+      - master
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.12
+      - uses: abatilo/actions-poetry@v2
+      - name: Install
+        run: poetry install
+      - name: Install libgl1
+        run: sudo apt install -y libgl1 libegl1 libglib2.0-0 libxkbcommon0 libdbus-1-3
+      - name: Copy stubs
+        run: |
+          mkdir -p docs/src
+          cp -r stubs/2.5.2/mobase-stubs docs/src/mobase
+      - name: Build
+        run: poetry run sphinx-build -b html docs/source docs/build
+        env:
+          PYTHONPATH: docs
+      - if: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' }}
+        name: Deploy Documentation
+        uses: JamesIves/github-pages-deploy-action@v4
+        with:
+          ssh-key: ${{ secrets.DEPLOY_KEY }}
+          repository-name: ModOrganizer2/python-plugins-doc
+          branch: master
+          folder: docs/build

.github/workflows/linting.yml

@@ -5,20 +5,16 @@ on: [push, pull_request]
 jobs:
   checks:
     runs-on: ubuntu-latest
-    strategy:
-      max-parallel: 4
-      matrix:
-        python-version: [3.8]
-
     steps:
-    - uses: actions/checkout@v2
-    - name: Set up Python ${{ matrix.python-version }}
-      uses: actions/setup-python@v2
-      with:
-        python-version: ${{ matrix.python-version }}
-    - name: Install dependencies
-      run: |
-        python -m pip install --upgrade pip
-        pip install tox
-    - name: Test with tox
-      run: tox -e py38-lint
+      - uses: actions/checkout@v4
+      - name: Set up Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.12
+      - uses: abatilo/actions-poetry@v2
+      - name: Install
+        run: |
+          poetry install
+      - name: Lint
+        run: |
+          poetry run poe lint

.github/workflows/pull_request.yml

@@ -1,18 +0,0 @@
-name: Check Documentation
-
-on: [pull_request]
-
-jobs:
-  build:
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: actions/checkout@v1
-    # Standard drop-in approach that should work for most people.
-    - uses: ammaraskar/sphinx-action@master
-      env:
-        PYTHONPATH: .
-      with:
-        pre-build-command: "apt-get update -y && apt-get install -y libgl1-mesa-glx && cp stubs/2.4.0/mobase.pyi docs/mobase.py"
-        docs-folder: "docs/"

.github/workflows/pypi-publish.yml

@@ -1,41 +1,57 @@
 # This workflows will upload a Python Package using Twine when a release is created
 # For more information see: https://help.github.com/en/actions/language-and-framework-guides/using-python-with-github-actions#publishing-to-package-registries
 
-name: Upload Python Package
+name: Publish Python 🐍 distribution 📦 to PyPI and TestPyPI
 
 on:
   push:
     tags: ["*"]
 
 jobs:
-  deploy:
-
+  build:
+    name: Build distribution 📦
     runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Replace string
+        uses: frabert/replace-string-action@v1.1
+        id: version
+        with:
+          string: ${{ github.ref_name }}
+          pattern: "v?([0-9][.][0-9][.][0-9]).*"
+          replace-with: "$1"
+      - uses: actions/setup-python@v2
+        with:
+          python-version: 3.12
+      - uses: abatilo/actions-poetry@v2
+      - name: Build
+        run: |
+          cd stubs/setup
+          mkdir mobase-stubs
+          cp -r ../${{ steps.version.outputs.replaced }}/mobase-stubs/* mobase-stubs/
+          sed -i 's/__version__ = ".*"/__version__ = "${{ github.ref_name }}"/' mobase-stubs/__init__.pyi
+          TAG=${{ github.ref_name }}
+          poetry version ${TAG#v}
+          poetry build
+      - name: Store the distribution packages
+        uses: actions/upload-artifact@v3
+        with:
+          name: python-package-distributions
+          path: stubs/setup/dist/
+
+  publish-to-pypi:
+    name: Publish Python 🐍 distribution 📦 to PyPI
+    needs:
+      - build
+    runs-on: ubuntu-latest
+    permissions:
+      id-token: write # IMPORTANT: this permission is mandatory for trusted publishing
 
     steps:
-    - uses: actions/checkout@v2
-    - name: Replace string
-      uses: frabert/replace-string-action@v1.1
-      id: version
-      with:
-        string: ${{ github.ref_name }}
-        pattern: "v?([0-9][.][0-9][.][0-9]).*"
-        replace-with: "$1"
-    - name: Set up Python
-      uses: actions/setup-python@v2
-      with:
-        python-version: '3.10'
-    - name: Install dependencies
-      run: |
-        python -m pip install --upgrade pip
-        pip install setuptools wheel twine
-    - name: Build and publish
-      env:
-        TWINE_USERNAME: ${{ secrets.PYPI_USERNAME }}
-        TWINE_PASSWORD: ${{ secrets.PYPI_PASSWORD }}
-      run: |
-        cd stubs/setup
-        cp -r ../${{ steps.version.outputs.replaced }}/mobase-stubs/* mobase-stubs/
-        sed -i 's/__version__ = ".*"/__version__ = "${{ github.ref_name }}"/' mobase-stubs/__init__.pyi
-        python setup.py sdist bdist_wheel
-        twine upload dist/*
+      - name: Download all the dists
+        uses: actions/download-artifact@v3
+        with:
+          name: python-package-distributions
+          path: dist/
+      - name: Publish distribution 📦 to PyPI
+        uses: pypa/gh-action-pypi-publish@release/v1

README.md

@@ -16,7 +16,7 @@ MO2.
 You can install stubs for a specific version of MO2:
 
 ```bash
-pip install mobase-stubs==2.3.2.*
+pip install mobase-stubs==2.5.*
 ```
 
 Some words of warning:
@@ -38,8 +38,8 @@ have a `python310.dll` in your MO2 installation path, then you need **Python 3.1
 To generate the stubs, you can run:
 
 ```bash
-# install the package (-e if you want editable mode)
-pip install [-e] .
+# install the package
+poetry install
 
 # change the output folder to whatever you want
 mo2-stubs-generator -c configs/config-2.4.yml -o mobase-stubs ${MO2_INSTALL_PATH}
@@ -94,6 +94,21 @@ It is possible to start a (i)python interpreter with `mobase` imported by runnin
 python -i -m mo2.stubs.generator.loader ${MO2_INSTALL_PATH}
 ```
 
+You can also import `mobase` in your code using the following (after installing
+this package):
+
+```python
+from mo2.stubs.generator import load_mobase
+
+mobase = load_mobase(MO2_INSTALL_PATH)
+
+# the above will probably not give you type-completion in your IDE or typing, so
+# you can use the following (if the stubs are installed)
+load_mobase(MO2_INSTALL_PATH)
+import mobase
+import mobase.widgets
+```
+
 **Note:** Most classes in `mobase` cannot be instantiated, so this is mostly intended
 for MO2 developers.
 

docs/Makefile

@@ -1,20 +0,0 @@
-# Minimal makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line, and also
-# from the environment for the first two.
-SPHINXOPTS    ?=
-SPHINXBUILD   ?= sphinx-build
-SOURCEDIR     = source
-BUILDDIR      = build
-
-# Put it first so that "make" without argument is like "make help".
-help:
-	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
-
-.PHONY: help Makefile
-
-# Catch-all target: route all unknown targets to Sphinx using the new
-# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
-%: Makefile
-	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/make.bat

@@ -1,35 +0,0 @@
-@ECHO OFF
-
-pushd %~dp0
-
-REM Command file for Sphinx documentation
-
-if "%SPHINXBUILD%" == "" (
-	set SPHINXBUILD=sphinx-build
-)
-set SOURCEDIR=source
-set BUILDDIR=build
-
-if "%1" == "" goto help
-
-%SPHINXBUILD% >NUL 2>NUL
-if errorlevel 9009 (
-	echo.
-	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
-	echo.installed, then set the SPHINXBUILD environment variable to point
-	echo.to the full path of the 'sphinx-build' executable. Alternatively you
-	echo.may add the Sphinx directory to PATH.
-	echo.
-	echo.If you don't have Sphinx installed, grab it from
-	echo.http://sphinx-doc.org/
-	exit /b 1
-)
-
-%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
-goto end
-
-:help
-%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
-
-:end
-popd

docs/requirements.txt

@@ -1,4 +0,0 @@
-sphinx-rtd-theme
-sphinx-autodoc-typehints
-sphinx-automodapi
-PyQt5

docs/source/conf.py

@@ -10,21 +10,13 @@
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
 #
-import os
-import sys
-
-sys.path.insert(0, os.path.abspath("../../stubs/2.4.0/"))
-
 
 # -- Project information -----------------------------------------------------
 
 project = "MO2 Python Plugin API"
-copyright = "2020, Holt59"
+copyright = "2023, Holt59"
 author = "Holt59"
 
-# The full version, including alpha/beta/rc tags
-release = "2.3rc1"
-
 
 # -- General configuration ---------------------------------------------------
 
@@ -35,8 +27,9 @@ extensions = [
     "sphinx.ext.autodoc",
     "sphinx_autodoc_typehints",
     "sphinx.ext.napoleon",
+    "autoapi.extension",
     # "sphinx.ext.autosummary",
-    "sphinx_automodapi.automodapi",
+    # "sphinx_automodapi.automodapi",
 ]
 
 # Add any paths that contain templates here, relative to this directory.
@@ -47,6 +40,9 @@ templates_path = ["_templates"]
 # This pattern also affects html_static_path and html_extra_path.
 exclude_patterns = []
 
+autoapi_dirs = ["../src"]
+autoapi_member_order = "groupwise"
+
 
 # -- Options for HTML output -------------------------------------------------
 
@@ -69,5 +65,5 @@ html_favicon = "mo2.ico"
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ["_static"]
+# html_static_path = ["_static"]
 html_extra_path = [".nojekyll"]

docs/source/index.rst

@@ -18,7 +18,6 @@ This documentation is dedicated to writting MO2 **Python** plugins.
    plugin-types
    writing-plugins
    faq
-   mobase
 
 
 

docs/source/mobase.rst

@@ -1,11 +0,0 @@
-``mobase`` API
-==============
-
-.. currentmodule:: mobase
-
-.. automodapi:: mobase
-   :no-inheritance-diagram:
-   :no-heading:
-
-.. toctree::
-   :maxdepth: 4

docs/source/modules.rst

@@ -1,7 +0,0 @@
-mobase
-======
-
-.. toctree::
-   :maxdepth: 4
-
-   mobase

docs/source/plugin-types.rst

@@ -64,10 +64,8 @@ These plugins (shall eventually) implement all the game specific features and fu
 able to add support for further games.
 The plugin is also responsible to help MO determine if (and where) the game is installed in the first place.
 Since supporting a game properly requires extensions in many places of the UI.
-To allow this without creating one huge plugin interface that involves every aspect of MO, game plugins
-expose a *feature list*.
-The list of possible features can be found in the "game_features" project and each feature can itself be
-considered a plugin interface.
+To allow this without creating one huge plugin interface that involves every aspect of MO,
+game plugins can register only the features they need to MO2 using :meth:`registerFeature<mobase.IGameFeatures.registerFeature>`
 
 As an example for a game feature take BSA invalidation: If the game requires BSA invalidation it will implement
 this feature.
@@ -147,4 +145,4 @@ File Mappings
 
 This interface allows plugins to add virtual file (or directory) links to the virtual file system in addition to the
 mod files.
-Profile-local save games, ini-files and load-orders are all implemented this way in MO2.
+Profile-local save games, ini-files and load-orders are all implemented this way in MO2.

pyproject.toml

@@ -0,0 +1,54 @@
+[tool.poetry]
+name = "mo2-pystubs-generation"
+version = "0.1.0"
+description = ""
+authors = ["Holt59 <capelle.mikael@gmail.com>"]
+license = "MIT"
+readme = "README.md"
+packages = [{ include = "mo2", from = "src" }]
+
+[tool.poetry.scripts]
+mo2-stubs-generator = "mo2.stubs.generator.__main__:main"
+
+[tool.poetry.dependencies]
+python = "^3.12"
+pyqt6 = "6.7.1"
+pyyaml = "^6.0.1"
+typing-extensions = "^4.12.2"
+
+[tool.poetry.group.dev.dependencies]
+pyright = "^1.1.374"
+ruff = "^0.5.5"
+types-pyyaml = "^6.0.12.20240724"
+poethepoet = "^0.27.0"
+
+[tool.poetry.group.doc.dependencies]
+sphinx-rtd-theme = "^2.0.0"
+sphinx-autodoc-typehints = "^2.2.3"
+sphinx-automodapi = "^0.17.0"
+sphinx = "<8"
+sphinx-autoapi = "^3.2.1"
+
+[build-system]
+requires = ["poetry-core"]
+build-backend = "poetry.core.masonry.api"
+
+[tool.poe.tasks]
+format-imports = "ruff check --select I src --fix"
+format-ruff = "ruff format src"
+format.sequence = ["format-imports", "format-ruff"]
+lint-ruff = "ruff check src"
+lint-ruff-format = "ruff format --check src"
+lint-pyright = "pyright src"
+lint.sequence = ["lint-ruff", "lint-ruff-format", "lint-pyright"]
+lint.ignore_fail = "return_non_zero"
+
+[tool.ruff]
+target-version = "py310"
+
+[tool.ruff.lint]
+extend-select = ["B", "Q", "I"]
+
+[tool.pyright]
+typeCheckingMode = "strict"
+reportMissingTypeStubs = true

setup.cfg

@@ -1,40 +0,0 @@
-[flake8]
-# Use black line length:
-max-line-length = 88
-extend-ignore =
-    # See https://github.com/PyCQA/pycodestyle/issues/373
-    E203,
-per-file-ignores =
-  *.pyi: E301, E302, E305, E501, E701, E741, F401, F403, F405, F822
-  # Since typing.pyi defines "overload" this is not recognized by flake8 as typing.overload.
-  # Unfortunately, flake8 does not allow to "noqa" just a specific error inside the file itself.
-  typing.pyi: E301, E302, E305, E501, E701, E741, F401, F403, F405, F811, F822
-
-[mypy]
-warn_return_any = True
-warn_unused_configs = True
-namespace_packages = True
-
-[isort]
-profile = black
-multi_line_output = 3
-
-[tox:tox]
-skipsdist = true
-envlist = py310-lint
-
-[testenv:py310-lint]
-skip_install = true
-deps =
-    black
-    mypy
-    flake8
-    flake8-black
-    git+https://github.com/TilmanK/PyQt6-stubs.git
-    types-PyYAML
-    isort
-commands =
-    black src --check --diff
-    flake8 src
-    mypy src
-    isort -c src

setup.py

@@ -1,35 +0,0 @@
-# -*- encoding: utf-8 -*-
-
-from setuptools import find_namespace_packages, setup
-
-install_requires = ["black", "isort"]
-
-dev_requires = [
-    "black",
-    "flake8-black",
-    "flake8",
-    "types-chardet",
-]
-
-setup(
-    name="mo2-stubs-generator",
-    version="1.0.0",
-    package_dir={"": "src"},
-    packages=find_namespace_packages(where="src", include=["mo2.*"]),
-    author="Holt59",
-    author_email="capelle.mikael@gmail",
-    description="Python stubs generator for mobase (MO2 Python API).",
-    long_description=open("README.md").read(),
-    url="https://github.com/ModOrganizer2/pystubs-generation",
-    classifiers=[
-        "Programming Language :: Python",
-        "Programming Language :: Python :: 3",
-        "Programming Language :: Python :: 3.10",
-    ],
-    license="MIT",
-    install_requires=install_requires,
-    extras_require={"dev": dev_requires},
-    entry_points={
-        "console_scripts": ["mo2-stubs-generator=mo2.stubs.generator.__main__:main"],
-    },
-)