7016efffd6
Rename websocket to uaiowebsocket to avoid conflict
2026-02-25 19:23:10 +01:00
5555a83d7c
Use lilygo_t_display_s3 for emulated t-display-s3
...
This means the qemu.py is deprecated.
2026-02-25 18:09:43 +01:00
85498e47a3
fix(st7789): program RAMCTRL for I80 RGB565 byte order
...
Ensure ST7789 RAMCTRL sets RGB565 swap on 8‑bit
I80 buses to fix color endianness; SPI path unchanged.
2026-02-25 16:02:40 +01:00
f339979440
Reduce debug
2026-02-25 15:40:36 +01:00
71e1ea8bd2
stream_wav.py: add hardware volume control
...
uses shift but doesn't seem to work
2026-02-25 14:31:57 +01:00
4bbe81f786
Synchronize qemu with t-display-s3
2026-02-25 14:28:05 +01:00
391071aee4
Move file
2026-02-25 07:55:47 +01:00
e4c0ee2570
Add duplex test
2026-02-25 07:54:54 +01:00
0268b20628
stream_wav: restore tweaks
...
QuasiBird still runs jittery at 22050 hz 16 bit stereo.
Mono is fine, and lower sample rates are fine too.
At max volume, so no volume scaling, the frame rate is quite high
but it still jitters. The question is why...
- does the buffer underrun?
- or does it spend too much time reading from SD card?
- or is the CPU busy?
Solutions:
- offload it to a different core
- do the I2S playback asynchronous
I guess it doesn't make sense tweaking this, as audio plays fine up to 48khz stereo
if no game is being played, just normal GUI updates.
2026-02-24 23:27:53 +01:00
417b725473
stream_wav: reduce minimal sample rate
2026-02-24 23:20:02 +01:00
817807ca3a
MusicPlayer: fix blank screen when playing issue
2026-02-24 23:15:42 +01:00
722ab65ebd
MusicPlayer: show playing song
2026-02-24 21:44:36 +01:00
cb7669f88a
Logging
2026-02-24 21:40:24 +01:00
210698bd0f
MusicPlayer: fix volume
2026-02-24 19:26:24 +01:00
f358ed65ae
Fix volume setting
2026-02-24 16:47:02 +01:00
daa7125052
Rework AudioManager
2026-02-24 16:39:26 +01:00
2f1ee282c3
Comments
2026-02-24 08:28:04 +01:00
c95a24bbfa
lilygo_t_display_s3: fix keyboard handling
2026-02-24 00:12:08 +01:00
33862749b7
Comments
2026-02-23 23:33:48 +01:00
65d7f6e4b3
Comments
2026-02-23 23:12:30 +01:00
e0727c2d22
lilygo_t_display_s3: different rotation so buttons make sense
...
Otherwise, with 90 degree rotation, the PREV and NEXT buttons should be
swapped. With 270 degree rotation, they can remain.
2026-02-23 23:11:33 +01:00
e8601c5b05
Board detect: use more digits
...
Otherwise it will break if espressif wraps around and starts
producing boards with the same first digit of the unique ID.
2026-02-23 23:03:42 +01:00
b145b2f091
Comments
2026-02-23 23:03:01 +01:00
d58f7c7bfb
tweak qemu
2026-02-23 22:48:28 +01:00
1ab4845777
lilygo_t_display_s3: rotate display for more natural experience
2026-02-23 22:45:13 +01:00
Thomas Farstrike