Files
openocd/tcl/board
Peter Griffin 0e02fe40c6 tcl: add hi3798 target and Tocoding Poplar board config
This config covers the 4x Cortex A53 CPUs. A custom connector
is required from J14 to standard ARM JTAG on v1 boards. However
v2 hardware should have a standard FTSH-105-01-L-DV connector.

Pinmuxing code to enable JTAG pins is included in l-loader-poplar
repository, so board is flashed with open source code, JTAG
is available at very early boot. Alternatively the following
pokes can be issued from U-Boot to enable JTAG (e.g. to debug
hisilicon SDK).

mw 0xf8a210ec 0x130;
mw 0xf8a210f0 0x130;
mw 0xf8a210f4 0x130;
mw 0xf8a210f8 0x130;
mw 0xf8a210fc 0x130;
mw 0xf8a21100 0x130;

Change-Id: I2b83dfcb3dc5461c1620f94dd99aa7b31fdda59b
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-on: http://openocd.zylin.com/4161
Tested-by: jenkins
Reviewed-by: Jiri Kastner <cz172638@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-10-16 14:10:52 +01:00
..
2014-06-01 18:27:09 +00:00
2011-04-09 10:14:46 +02:00
2011-04-09 10:16:28 +02:00
2009-08-21 09:01:00 +00:00
2010-06-25 21:37:53 +02:00
2010-03-15 08:37:43 -07:00
2010-03-15 08:37:43 -07:00
2016-05-20 21:38:58 +01:00
2010-12-18 21:04:22 +01:00
2010-12-18 21:04:22 +01:00
2015-01-09 08:47:20 +00:00
2010-04-15 19:10:36 +02:00
2010-03-15 08:37:43 -07:00
2012-02-13 12:03:26 +00:00
2010-12-18 21:04:22 +01:00
2015-01-09 08:47:20 +00:00
2015-01-09 08:47:20 +00:00
2015-01-09 08:47:20 +00:00
2010-12-18 21:04:22 +01:00
2010-12-18 21:04:22 +01:00
2011-08-24 11:13:26 +02:00
2010-12-18 21:04:22 +01:00
2011-03-13 14:59:39 +01:00
2010-12-18 21:04:22 +01:00
2010-12-18 21:04:22 +01:00
2011-12-23 09:39:48 +00:00
2011-06-02 12:17:28 +02:00
2010-04-26 07:08:55 +02:00