The macros trigger few errors with checkpatch:
ERROR:MACRO_ARG_REUSE: Macro argument reuse 'g' - possible
side-effects?
ERROR:TRAILING_STATEMENTS: trailing statements should be
on next line
ERROR:SPACING: spaces preferred around (several cases)
ERROR:SINGLE_STATEMENT_DO_WHILE_MACRO: Single statement
macros should not use a do {} while (0) loop
plus an empty line triggers
ERROR:BRACES: Blank lines aren't necessary before a close
brace '}'
Fix them!
Change-Id: I0690b68b511ed7f45a7e0909a0addd2822ba9fe8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8499
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The function dpm->finish() returns a value that is almost always
ignored.
Drop the commented-out cast
/* (void) */
Change-Id: I7ff210a2693dd1877b7c7591705cdcd96a2c6125
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8498
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Fix checkpatch errors:
ERROR:BOOL_COMPARISON: Using comparison to true/false is
error prone
While there,
- drop useless parenthesis,
- drop unnecessary else after a return.
Change-Id: I1234737b3e65bd10df5e938d1c36f9abaf02d348
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8496
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Checkpatch triggers the error
ERROR:RETURN_VOID: void function return statements are not
generally useful
Fix it!
Change-Id: I72d9fb8242d6a91c0aa481d5d023f0359c76a5ec
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8492
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Checkpatch triggers the error
ERROR:OPEN_BRACE: open brace '{' following function
definitions go on the next line
Fix it!
Change-Id: I0ce4585a6507eca094b82cdabdecf6fdbe7923b1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8491
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I4f936ffc4cedb153afa331cd293b08f4c913dc93
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8482
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I2c1ef03bbc828112cc5bea89463cff9fc0c1e94f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8481
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Use Checkpatch-ignore below for the function pointers in the file
'armv7a_cache_l2x.h' that do not assign the identifier names to
the function arguments.
Most of these struct are unused and should be fixed or dropped.
Checkpatch-ignore: FUNCTION_ARGUMENTS
Change-Id: I8f27e68eb3502e431c1ba801b362358105f9f2dc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8480
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: Id808747855a02052f3738e2d232bff4dd99b27f1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8479
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Detected while converting 'unsigned' to 'unsigned int'.
Use the correct conversion string for stdint values.
Change-Id: I99f3dff4c64dfd7acf2bddb130b56e9ebe1e6c60
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8477
Tested-by: jenkins
Change order of dsp register name array and removed hi0 and lo0
to comply with gdb definition of dsp in mips-dsp.xml, the regs
name array is now mapping corresponding dsp accumulator names
onto `mips32_regs` and `core_regs` instead of mapping to instr
arrays in dsp functions.
feature now requires a place to store cached dsp registers.
Add dsp registers to reg_list for gdb to access them.
Add dsp module enable detection to avoid DSP Disabled exception
while reading dsp accumulators.
Add dsp register reading procedure in `mips32_pracc_read_regs`
and writing procedure in `mips32_pracc_write_regs`.
Change-Id: Iacc335da030ab85989922c81aac7925b3dc17459
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8476
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Due to checkpatch internal state machine, the field 'Checkpatch-ignore:'
must be in the commit message before the 'Signed-off-by:' line.
Report it in the documentation and add that multiple 'Checkpatch-ignore:'
lines are allowed.
Change-Id: I770cdc4cb5b33bcf63c860c154ab3cbd4785ad20
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7572
Tested-by: jenkins
The field 'struct chibios_chdebug::ch_version' is 16 bits wide, so
using le_to_h_u32() and be_to_h_u32() overflows in the following
fields of the struct.
Restrict the endianness conversion to 16 bits and use the target
endianness dependent target_buffer_get_u16().
Convert the 'struct chibios_chdebug::ch_version' to an array of
uint8_t.
Change-Id: Iaa80e9cb1a65c27512919398b8ffbf14e5c240cd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8473
Tested-by: jenkins
These devices are essentially the same as the E54 series with the
exception of immutable boot (SG41, SG61) and HSM (SG60, SG61), and some
bug fixes found only in E54 revision F. When the security features are
not enabled, they behave identically except for the different DIDs.
Signed-off-by: Matt Trescott <mtc@melexis.com>
Change-Id: Ic93313f3e20af0ed4a5768880d17b335a7b7bb04
Reviewed-on: https://review.openocd.org/c/openocd/+/8355
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Use a command group 'telnet' with subcommands instead of individual
commands with 'telnet_' prefix. Even though there is only one subcommand
at the moment, make this change to ensure consistency with other commands.
The old command is still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I5e88632fa0d0ce5a8129e9fcf5ae743fc5b093cb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8378
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The current semantics are a bit confusing, as the return value looks
like memcmp (0/false being equal) but the bool return type means one
likely expects true to mean equal. Make this clearer by switching them
out for buf_eq* functions that do that instead.
Checkpatch-ignore: UNSPECIFIED_INT
Change-Id: Iee0c5af794316aab5327cb9c168051fabd3bc1cb
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8490
Tested-by: jenkins
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Backtraces performed by GDB on any thread other than the current
thread would fail if hardware 8 byte ISR stack alignment
was enabled on cortex_m targets. Stack reads now adjust
the stored SP to account for a potential offset introduced by hardware.
Fixed incorrect register offsets for cortex_m Nuttx frames by reading
the TCB info symbols to determine correct offsets.
Fixed offsets can no longer be used since the offsets have changed
multiple times for different Nuttx versions.
Tested on nuttx-12.1.0.
Tested using custom stm32h7 board and custom s32k148 board variants.
Built with CONFIG_ARCH_FPU enabled and disabled to
test FPU and non FPU frame logic.
Change-Id: Ifcbeefb0ddcfbcb528daa9d1d95732ca9584c9ef
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8180
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
