__bpf_dynptr_data() can return NULL (FILE dynptrs, any non-contiguous
backing). bpf_verify_pkcs7_signature() forwards the pointer to
verify_pkcs7_signature() unchecked, causing a NULL deref in
asn1_ber_decoder() reachable from a sleepable BPF LSM at lsm.s/bpf.
NULL-check both pointers and reject with -EINVAL. Mirrors the guards
already in kernel/bpf/crypto.c.
Fixes: 865b0566d8 ("bpf: Add bpf_verify_pkcs7_signature() kfunc")
Reported-by: Xianrui Dong <dongxianrui1@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260520024059.313468-1-kpsingh@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Global subprogs are verified independently and are not descended into
when their callers are symbolically executed. This means a caller can
hold references or locks across a global subprog call that may throw,
while the verifier only checks the non-exceptional return path at the
call site.
Record whether a subprog might throw in the CFG summary pass, alongside
the existing might_sleep and packet-data-changing summaries, and
propagate that effect through reachable callees.
When a global subprog is marked as possibly throwing, push the normal
continuation and validate the exceptional path immediately at the call
site, avoiding a synthetic exception state and associated special case
in the pruning checks.
Fixes: f18b03faba ("bpf: Implement BPF exceptions")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260517075530.3461166-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Building without CONFIG_BPF_EVENTS produces a build-time
warning:
WARN: resolve_btfids: unresolved symbol bpf_session_is_return
The function is actually defined in kernel/trace/bpf_trace.o,
which is built conditionally based on configuration.
Make the reference to this function conditional as well,
as is already done in the bpf verifier for other functions.
Fixes: 8fe4dc4f64 ("bpf: change prototype of bpf_session_{cookie,is_return}")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260515113242.2706303-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
percpu_array_map_ops.map_meta_equal points to the generic
bpf_map_meta_equal(), which does not compare max_entries. When a
percpu array serves as an inner map, replacing it with one that has
fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup()
inlines the original template's index_mask as a JIT immediate, a lookup
on the replacement map can access pptrs[] out of bounds.
Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(),
which already enforces the max_entries equality check.
Add a selftest to verify that replacing a percpu array inner map with
a differently-sized one is rejected.
Fixes: db69718b8e ("bpf: inline bpf_map_lookup_elem() for PERCPU_ARRAY maps")
Signed-off-by: Guannan Wang <wgnbuaa@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260514074454.77491-1-wgnbuaa@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the BPF instruction set allows bpf-to-bpf calls (or internal
calls, pseudo calls) to use a 32-bit imm field to represent the relative
jump offset.
However, when JIT is disabled or falls back to the interpreter, the
verifier invokes bpf_patch_call_args() to rewrite the call instruction.
In this function, the 32-bit imm is downcast to s16 and stored in the off
field.
void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
{
stack_depth = max_t(u32, stack_depth, 1);
insn->off = (s16) insn->imm;
insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] -
__bpf_call_base_args;
insn->code = BPF_JMP | BPF_CALL_ARGS;
}
If the original imm exceeds the s16 range (i.e., a jump offset greater
than 32767 instructions), this downcast silently truncates the offset,
resulting in an incorrect call target.
Fix this by:
1. In bpf_patch_call_args(), keeping the imm field unchanged and using the
off field to store the index of the interpreter function.
2. In ___bpf_prog_run() for the JMP_CALL_ARGS case, retrieving the
interpreter function pointer from the interpreters_args array using the
off field as the index, and passing the original imm to calculate the
last argument of the interpreter function.
After these changes, the truncation issue is resolved, and __bpf_call_base_args
is also no longer needed and can be removed, which makes the code cleaner.
Performance: In ___bpf_prog_run() for the JMP_CALL_ARGS case, changing the
retrieval of the interpreter function pointer from pointer addition to
direct array indexing improves performance. The possible reason is that the
latter has better instruction-level parallelism. See the v5 discussion [1]
for more details.
[1] https://lore.kernel.org/bpf/f120c3c4-6999-414a-b514-518bb64b4758@zju.edu.cn/
To avoid requiring bpftool changes, keep the new imm/off encoding internal
and restore the legacy xlated dump layout in bpf_insn_prepare_dump().
For bpf-to-bpf call offsets that do not fit in s16, export off as 0 instead
of a truncated and misleading value.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Suggested-by: Xu Kuohai <xukuohai@huaweicloud.com>
Suggested-by: Puranjay Mohan <puranjay@kernel.org>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Link: https://lore.kernel.org/r/20260506094714.419842-3-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The interpreters_args array only accommodates stack depths up to
MAX_BPF_STACK (512 bytes). However, do_misc_fixups() may allow a larger
stack depth if JIT is requested.
If JIT compilation later fails and falls back to the interpreter, the
verifier invokes bpf_patch_call_args() with this oversized stack depth.
This causes a load-time out-of-bounds (OOB) read when calculating the
interpreter function pointer index.
Fix this by changing bpf_patch_call_args() to return an int and explicitly
rejecting the JIT fallback (returning -EINVAL) if the stack depth exceeds
MAX_BPF_STACK.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260506094714.419842-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
"Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI,
since all JITs had to be touched to move constant blinding out and
pass bpf_verifier_env in.
- Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov)
- Dissociate struct_ops program with map if map_update fails (Amery
Hung)
- Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann)
- Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel
Borkmann)
- Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns
(Eduard Zingerman)
- Copy token from main to subprogs to fix missing kallsyms (Eduard
Zingerman)
- Prevent double close and leak of btf objects in libbpf (Jiri Olsa)
- Fix af_unix null-ptr-deref in sockmap (Michal Luczaj)
- Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta
Yatsenko)
- Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in
arm64 and riscv JITs (Puranjay Mohan)
- Fix out of bounds access. Validate node_id in arena_alloc_pages()
(Puranjay Mohan)
- Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan)
- Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for
indirect jump targets on x86-64, arm64 JITs (Xu Kuohai)
- Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits)
bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT
bpf: Dissociate struct_ops program with map if map_update fails
bpf: Validate node_id in arena_alloc_pages()
libbpf: Prevent double close and leak of btf objects
selftests/bpf: cover UTF-8 trace_printk output
bpf: allow UTF-8 literals in bpf_bprintf_prepare()
selftests/bpf: Reject scalar store into kptr slot
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
bpf: Fix precedence bug in convert_bpf_ld_abs alignment check
bpf, arm64: Emit BTI for indirect jump target
bpf, x86: Emit ENDBR for indirect jump targets
bpf: Add helper to detect indirect jump targets
bpf: Pass bpf_verifier_env to JIT
bpf: Move constants blinding out of arch-specific JITs
bpf, sockmap: Take state lock for af_unix iter
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
bpf, sockmap: Fix af_unix iter deadlock
bpf, sockmap: Annotate af_unix sock:: Sk_state data-races
selftests/bpf: verify kallsyms entries for token-loaded subprograms
...
Currently, when bpf_struct_ops_map_update_elem() fails, the programs'
st_ops_assoc will remain set. They may become dangling pointers if the
map is freed later, but they will never be dereferenced since the
struct_ops attachment did not succeed. However, if one of the programs
is subsequently attached as part of another struct_ops map, its
st_ops_assoc will be poisoned even though its old st_ops_assoc was stale
from a failed attachment.
Fix the spurious poisoned st_ops_assoc by dissociating struct_ops
programs with a map if the attachment fails. Move
bpf_prog_assoc_struct_ops() to after *plink++ to make sure
bpf_prog_disassoc_struct_ops() will not miss a program when iterating
st_map->links.
Note that, dissociating a program from a map requires some attention as
it must not reset a poisoned st_ops_assoc or a st_ops_assoc pointing to
another map. The former is already guarded in
bpf_prog_disassoc_struct_ops(). The latter also will not happen since
st_ops_assoc of programs in st_map->links are set by
bpf_prog_assoc_struct_ops(), which can only be poisoned or pointing to
the current map.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260417174900.2895486-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_bprintf_prepare() only needs ASCII parsing for conversion
specifiers. Plain text can safely carry bytes >= 0x80, so allow
UTF-8 literals outside '%' sequences while keeping ASCII control
bytes rejected and format specifiers ASCII-only.
This keeps existing parsing rules for format directives unchanged,
while allowing helpers such as bpf_trace_printk() to emit UTF-8
literal text.
Update test_snprintf_negative() in the same commit so selftests keep
matching the new plain-text vs format-specifier split during bisection.
Fixes: 48cac3f4a9 ("bpf: Implement formatted output helpers with bstr_printf")
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-2-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce helper bpf_insn_is_indirect_target to check whether a BPF
instruction is an indirect jump target.
Since the verifier knows which instructions are indirect jump targets,
add a new flag indirect_target to struct bpf_insn_aux_data to mark
them. The verifier sets this flag when verifying an indirect jump target
instruction, and the helper checks the flag to determine whether an
instruction is an indirect jump target.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> #v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> #v12
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pass bpf_verifier_env to bpf_int_jit_compile(). The follow-up patch will
use env->insn_aux_data in the JIT stage to detect indirect jump targets.
Since bpf_prog_select_runtime() can be called by cbpf and lib/test_bpf.c
code without verifier, introduce helper __bpf_prog_select_runtime()
to accept the env parameter.
Remove the call to bpf_prog_select_runtime() in bpf_prog_load(), and
switch to call __bpf_prog_select_runtime() in the verifier, with env
variable passed. The original bpf_prog_select_runtime() is preserved for
cbpf and lib/test_bpf.c, where env is NULL.
Now all constants blinding calls are moved into the verifier, except
the cbpf and lib/test_bpf.c cases. The instructions arrays are adjusted
by bpf_patch_insn_data() function for normal cases, so there is no need
to call adjust_insn_arrays() in bpf_jit_blind_constants(). Remove it.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # v14
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
During the JIT stage, constants blinding rewrites instructions but only
rewrites the private instruction copy of the JITed subprog, leaving the
global env->prog->insnsi and env->insn_aux_data untouched. This causes a
mismatch between subprog instructions and the global state, making it
difficult to use the global data in the JIT.
To avoid this mismatch, and given that all arch-specific JITs already
support constants blinding, move it to the generic verifier code, and
switch to rewrite the global env->prog->insnsi with the global states
adjusted, as other rewrites in the verifier do.
This removes the constants blinding calls in each JIT, which are largely
duplicated code across architectures.
Since constants blinding is only required for JIT, and there are two
JIT entry functions, jit_subprogs() for BPF programs with multiple
subprogs and bpf_prog_select_runtime() for programs with no subprogs,
move the constants blinding invocation into these two functions.
In the verifier path, bpf_patch_insn_data() is used to keep global
verifier auxiliary data in sync with patched instructions. A key
question is whether this global auxiliary data should be restored
on the failure path.
Besides instructions, bpf_patch_insn_data() adjusts:
- prog->aux->poke_tab
- env->insn_array_maps
- env->subprog_info
- env->insn_aux_data
For prog->aux->poke_tab, it is only used by JIT or only meaningful after
JIT succeeds, so it does not need to be restored on the failure path.
For env->insn_array_maps, when JIT fails, programs using insn arrays
are rejected by bpf_insn_array_ready() due to missing JIT addresses.
Hence, env->insn_array_maps is only meaningful for JIT and does not need
to be restored.
For subprog_info, if jit_subprogs fails and CONFIG_BPF_JIT_ALWAYS_ON
is not enabled, kernel falls back to interpreter. In this case,
env->subprog_info is used to determine subprogram stack depth. So it
must be restored on failure.
For env->insn_aux_data, it is freed by clear_insn_aux_data() at the
end of bpf_check(). Before freeing, clear_insn_aux_data() loops over
env->insn_aux_data to release jump targets recorded in it. The loop
uses env->prog->len as the array length, but this length no longer
matches the actual size of the adjusted env->insn_aux_data array after
constants blinding.
To address it, a simple approach is to keep insn_aux_data as adjusted
after failure, since it will be freed shortly, and record its actual size
for the loop in clear_insn_aux_data(). But since clear_insn_aux_data()
uses the same index to loop over both env->prog->insnsi and env->insn_aux_data,
this approach results in incorrect index for the insnsi array. So an
alternative approach is adopted: clone the original env->insn_aux_data
before blinding and restore it after failure, similar to env->prog.
For classic BPF programs, constants blinding works as before since it
is still invoked from bpf_prog_select_runtime().
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> # powerpc jit
Reviewed-by: Pu Lehui <pulehui@huawei.com> # riscv jit
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # loongarch jit
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_jit_subprogs() copies various fields from the main program's aux to
each subprogram's aux, but omits the BPF token. This causes
bpf_prog_kallsyms_add() to fail for subprograms loaded via BPF token,
as bpf_token_capable() falls back to capable() in init_user_ns when
token is NULL.
Copy prog->aux->token to func[i]->aux->token so that subprograms
inherit the same capability delegation as the main program.
Fixes: d79a354975 ("bpf: Consistently use BPF token throughout BPF verifier logic")
Signed-off-by: Tao Chen <ctao@meta.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260415-subprog-token-fix-v4-1-9bd000e8b068@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
arena_vm_open() only bumps vml->mmap_count but never registers the
child VMA in arena->vma_list. The vml->vma always points at the
parent VMA, so after parent munmap the pointer dangles. If the child
then calls bpf_arena_free_pages(), zap_pages() reads the stale
vml->vma triggering use-after-free.
Fix this by preventing the arena VMA from being inherited across
fork with VM_DONTCOPY, and preventing VMA splits via the may_split
callback.
Also reject mremap with a .mremap callback returning -EINVAL. A
same-size mremap(MREMAP_FIXED) on the full arena VMA reaches
copy_vma() through the following path:
check_prep_vma() - returns 0 early: new_len == old_len
skips VM_DONTEXPAND check
prep_move_vma() - vm_start == old_addr and
vm_end == old_addr + old_len
so may_split is never called
move_vma()
copy_vma_and_data()
copy_vma()
vm_area_dup() - copies vm_private_data (vml pointer)
vm_ops->open() - bumps vml->mmap_count
vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA
The refcount ensures the rollback's arena_vm_close does not free
the vml shared with the original VMA.
Reported-by: Weiming Shi <bestswngs@gmail.com>
Reported-by: Xiang Mei <xmei5@asu.edu>
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260413194245.21449-1-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_STX through ARG_IMPRECISE dst should be recognized as a local
spill and join at_stack with the written value. For example,
consider the following situation:
// r1 = ARG_IMPRECISE{mask=BIT(0)|BIT(1)}
*(u64 *)(r1 + 0) = r8
Here the analysis should produce an equivalent of
at_stack[*] = join(old, r8)
BPF_ST through multi-offset or imprecise dst should join at_stack with
none instead of overwriting the slots. For example, consider the
following situation:
// r1 = ARG_IMPRECISE{mask=BIT(0)|BIT(1)}
*(u64 *)(r1 + 0) = 0
Here the analysis should produce an equivalent of
at_stack[*r1] = join(old, none).
Move the definition of the clear_overlapping_stack_slots() in order to
have __arg_track_join() visible. Remove the OFF_IMPRECISE constant to
avoid having two ways to express imprecise offset.
Only 'offset-imprecise {frame=N, cnt=0}' remains.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260413-stacklive-fixes-v2-1-398e126e5cf3@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
xulang <xulang@uniontech.com> says:
====================
Fix OOB read when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE
map to another pcpu map with the same value_size that is not rounded
up to 8 bytes, and add a test case to reproduce the issue.
The root cause is that pcpu_init_value() uses copy_map_value_long() which
rounds up the copy size to 8 bytes, but CGROUP_STORAGE map values are not
8-byte aligned (e.g., 4-byte). This causes a 4-byte OOB read when
the copy is performed.
====================
Link: https://lore.kernel.org/r/7653EEEC2BAB17DF+20260402073948.2185396-1-xulang@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
An out-of-bounds read occurs when copying element from a
BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the
same value_size that is not rounded up to 8 bytes.
The issue happens when:
1. A CGROUP_STORAGE map is created with value_size not aligned to
8 bytes (e.g., 4 bytes)
2. A pcpu map is created with the same value_size (e.g., 4 bytes)
3. Update element in 2 with data in 1
pcpu_init_value assumes that all sources are rounded up to 8 bytes,
and invokes copy_map_value_long to make a data copy, However, the
assumption doesn't stand since there are some cases where the source
may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data.
the verifier verifies exactly the size that the source claims, not
the size rounded up to 8 bytes by kernel, an OOB happens when the
source has only 4 bytes while the copy size(4) is rounded up to 8.
Fixes: d3bec0138b ("bpf: Zero-fill re-used per-cpu map element")
Reported-by: Kaiyan Mei <kaiyanm@hust.edu.cn>
Closes: https://lore.kernel.org/all/14e6c70c.6c121.19c0399d948.Coremail.kaiyanm@hust.edu.cn/
Link: https://lore.kernel.org/r/420FEEDDC768A4BE+20260402074236.2187154-1-xulang@uniontech.com
Signed-off-by: Lang Xu <xulang@uniontech.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The compiler sometimes stores the result of a PTR_TO_ARENA and SCALAR
operation into the scalar register rather than the pointer register.
Relax the verifier to allow operations between a source arena register
and a destination non-arena register, marking the destination's value
as a PTR_TO_ARENA.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Song Liu <song@kernel.org>
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Link: https://lore.kernel.org/r/20260412174546.18684-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
