Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
Reset controller fixes for v7.0, part 2
* Decouple spacemit K3 reset lines that were incorrectly coupled
together as one, but are in fact separate resets in hardware.
* Fix a double free in the reset_add_gpio_aux_device() error path.
This has already been fixed on reset/next by commit a9b95ce36d
("reset: gpio: add a devlink between reset-gpio and its consumer").
* Fix the MODULE_AUTHOR string in the rzg2l-usbphy-ctrl driver.
We merge this into reset/next to resolve a conflict between commits
a9b95ce36d ("reset: gpio: add a devlink between reset-gpio and its
consumer") and fbffb8c7c7 ("reset: gpio: fix double free in
reset_add_gpio_aux_device() error path").
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add clock and reset bindings for EN751221 as well as a "chip-scu" which is
an additional regmap that is used by the clock driver as well as others.
This split of the SCU across two register areas is the same as the Airoha
AN758x family.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Instead of grouping several different reset lines into one composite
reset, decouple them to individual ones which make it more aligned
with underlying hardware. And for DWC USB driver, it will match well
with the number of the reset property in the DT bindings.
The DWC3 USB host controller in K3 SoC has three reset lines - AHB, VCC,
PHY. The PCIe controller also has three reset lines - DBI, Slave, Master.
Also three reset lines each for UCIE and RCPU block.
As an agreement with maintainer, the reset IDs has been rearranged as
contiguous number but keep most part unchanged to avoid break patches
which already sent to mailing list. The changes of DT binding header file
and reset driver are merged together as one single commit to avoid
git-bisect breakage.
Fixes: 938ce3b165 ("reset: spacemit: Add SpacemiT K3 reset driver")
Fixes: 216e0a5e98 ("dt-bindings: soc: spacemit: Add K3 reset support and IDs")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There are two system control on Cix sky1 Soc. One is located in S0 domain,
and the other is located in S5 domain. The system control contains resets,
usb typeC and more. At this point, only the reset controller is embedded
as usb typeC uses it by phandle.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
Remove the definitions of number of clocks from bindings because they
prevent adding new clocks. Since the previous patch removed all refereces
within the driver, they can now be deleted.
The same for resets and plls.
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
TH1520 SoC is divided into several subsystems, most of them have
distinct reset controllers. Let's document reset controllers other than
the one for VO subsystem and IDs for their reset signals.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Registers in control of TH1520_RESET_ID_{NPU,WDT0,WDT1} belong to AP
reset controller, not the VO one which is documented as
"thead,th1520-reset" and is the only reset controller supported for
TH1520 for now.
Let's remove the IDs, leaving them to be implemented by AP-subsystem
reset controller in the future.
Fixes: 30e7573bab ("dt-bindings: reset: Add T-HEAD TH1520 SoC Reset Controller")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
NSS clock controller provides the clocks and resets to the networking
blocks such as PPE (Packet Process Engine) and UNIPHY (PCS) on IPQ5424
devices.
Add support for the compatible string "qcom,ipq5424-nsscc" based on the
existing IPQ9574 NSS clock controller Device Tree binding. Additionally,
update the clock names for PPE and NSS for newer SoC additions like
IPQ5424 to use generic and reusable identifiers "nss" and "ppe" without
the clock rate suffix.
Also add master/slave ids for IPQ5424 networking interfaces, which is
used by nss-ipq5424 driver for providing interconnect services using
icc-clk framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-7-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Linus Torvalds
Stephen Boyd
Philipp Zabel
Caleb James DeLisle
Yixun Lan
Kathiravan Thirumoorthy
Gary Yang
Rob Herring (Arm)
Guodong Xu
Finley Xiao
Yuji Ishikawa
Elaine Zhang
Yao Zi
Xuyang Dong
Mikhail Kshevetskiy
Laurentiu Mihalcea
Luo Jie