The download cache of the functional tests is currently only growing.
But sometimes tests get removed or changed to use different assets,
thus we should clean up the stale old assets after a while when they
are not in use anymore. So add a script that looks at the time stamps
of the assets and removes them if they haven't been touched for more
than half of a year. Since there might also be some assets around that
have been added to the cache before we added the time stamp files,
assume a default time stamp that is close to the creation date of this
patch, so that we don't delete these files too early (so we still have
all assets around in case we have to bisect an issue in the recent past
of QEMU).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20251014083424.103202-3-thuth@redhat.com>
We are going to remove obsolete assets from the cache, so keep
the time stamps of the assets that we use up-to-date to have a way
to detect stale assets later.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20251014083424.103202-2-thuth@redhat.com>
For the Windows msys2 CI job we install many packages using pacman
and use the GitLab cache to preserve the pacman cache across CI
runs. While metadata still needs downloading, this avoids pacman
re-downloading packages from msys2 if they have not changed.
The problem is that pacman never automatically purges anything
from its package cache. Thus the GitLab cache is growing without
bound and packing/unpacking the cache is consuming an increasing
amount of time in the CI job.
If we run 'pacman -Sc' /after/ installing our desired package set,
it will purge any cached downloaded packages that are not matching
any installed package.
This will (currently) cap the pacman download cache at approx
256 MB.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20251010160545.144760-1-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test_sbsaref_alpine is one of the longest running test in our testsuite,
because it does a full Linux boot a couple of times, for various different
CPU configurations. That's quite a lot of testing each time, for a rather
small additional test coverage. Thus let's drop some of the tests that don't
provide much in addition to the other ones.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20251006161850.181998-1-thuth@redhat.com>
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCaO8QRQAKCRAfewwSUazn
# 0UxeAQCM8zwwTBnAWbDJpxPWTVD5yz+Bv2YP+IbDc24BkzEvJwD/Z+5u+gEuBtum
# U8tTU/huVLezwpbwqgpTAYI2wJAOygw=
# =XZMy
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 14 Oct 2025 08:08:53 PM PDT
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20251015' of https://github.com/bibo-mao/qemu:
hw/loongarch/virt: Sort order by hardware device base address
hw/loongarch/virt: Remove header file ls7a.h
target/loongarch: Skip global TLB when calculating replaced TLB
target/loongarch: Add missing TLB flush with different asid
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With header file include/hw/loongarch/virt.h, hardware device definition
order is sorted by its base address. Add remove unused macro
VIRT_IOAPIC_REG_BASE and VIRT_MISC_REG_BASE.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
LoongArch virt machine uses GPEX PCIE host bridge rather than 7A host
bridge. Remove header file ls7a.h and put hardware information to file
include/hw/loongarch/virt.h
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
When new TLB entry is added, TLB index is calculated from invalid
entry at first and then from different ASID, and randomly at last.
With different ASID, global TLB should be skipped since ASID is not
useful when global TLB is added.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
If asid is changed in function helper_csrwr_asid(), qemu TLB is flushed,
however loongArch TLB is still valid. So loongArch TLB need be invalidated
in function invalidate_tlb() with different asid and bit effective need
be cleared.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
For strict alignment targets we registered cpu_pointer_wrap_notreached,
but generic code used it before recognizing the alignment exception.
Hoist the first page lookup, so that the alignment exception happens first.
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.debian.org/1112285
Fixes: a4027ed7d4 ("target: Use cpu_pointer_wrap_notreached for strict align targets")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Set and clear PAGE_DONTDUMP, and honor that in vma_dump_size.
Signed-off-by: Jon Wilson <jonwilson030981@gmail.com>
[rth: Use new page_set_flags semantics; also handle DODUMP]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand the interface of page_set_flags to separate the
set of flags to be set and the set of flags to be cleared.
This allows us to replace PAGE_RESET with the PAGE_VALID
bit within clear_flags.
Replace PAGE_TARGET_STICKY with TARGET_PAGE_NOTSTICKY;
aarch64-linux-user is the only user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* rust: fix nightly warnings
* target/i386: a smattering of fixes
* monitor: add "info accelerators"
* kvm: cleanups to kvm_cpu_synchronize_put()
* target/i386: Add TSA attack variants and verw-clear feature flag
* async: tsan bottom half fixes
* rust: migration state wrappers with support for BQL-free devices
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmjuRZYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPTFgf+LRXCvGJwrlJwD4cAS/TBzhzpOAMZ
# v75RZ/s2tF7nYRhT28MDtZWsXeVrjO/nrSXaThxe6WHfmKK2W+16a+BgfhbeTEGt
# wBnK3JMb84i7T2Foy91jVCc4k0igwZu6Wmnf3rOP9gpdjAK6FYLje1KWvF7FrJO1
# ackAzJJ+TiZmc5QpXLW8sjaIidmefveXsdHwMVRz67LDvlDANEhp4rixjTVmKe0Z
# UL3tzrEj/b15vvElkh3a1IrVAttexay425J94R5i3Xpz3fEBqmIdpJt4eiCt9j0L
# zL7TOXwSJWiOX+mec6aJwYh8y4ikD6Yq4f4Hc9xFBEZRcICaxx4uoOscYA==
# =FroL
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 14 Oct 2025 05:44:06 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (28 commits)
rust: migration: implement ToMigrationState as part of impl_vmstate_bitsized
timer: constify some functions
rust: qemu-macros: add ToMigrationState derive macro
rust: migration: add high-level migration wrappers
rust: move VMState from bql to migration
rust: migration: extract vmstate_fields_ref
rust: migration: validate termination of subsection arrays
rust: migration: do not store raw pointers into VMStateSubsectionsWrapper
rust: migration: do not pass raw pointer to VMStateDescription::fields
rust: bql: add BqlRefCell::get_mut()
accel/kvm: Factor kvm_cpu_synchronize_put() out
accel/kvm: Introduce KvmPutState enum
monitor: generalize query-mshv/"info mshv" to query-accelerators/"info accelerators"
monitor: clarify "info accel" help message
target/i386: user: do not set up a valid LDT on reset
async: access bottom half flags with qatomic_read
target/i386: fix access to the T bit of the TSS
target/i386: fix x86_64 pushw op
i386/tcg/smm_helper: Properly apply DR values on SMM entry / exit
i386/cpu: Prevent delivering SIPI during SMM in TCG mode
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
aspeed queue:
* Introduce AspeedCoprocessor class and base implementation
* Remove redudant functional tests to optimize for CI resources
* Deprecate fp5280g2-bmc, qcom-dc-scm-v1-bmc, qcom-firework-bmc and
sonorapass-bmc machines
* Bump ASPEED SDK to v09.08
* Add PCIe and network tests
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmjs8/YACgkQUaNDx8/7
# 7KFjzw//dL7SV3fVdq5faOLVheXTj5IpgtsCaqcBl/KUSprkCV/PHE5wYUN0pKjA
# TBd9waKBt5yg9ppZC/5o20SLkKyrYLa3+2af6X+c0eHo1ALXMUC+Cupws514eEoe
# y9sq1TO+yag5OczUi6h0UCmz3ELK2KHRf8e3ca/0S8zLry5bcwYAu6BHig2wqKnN
# qOkIwz9lSIAem9IvXDbWN15x7nO8eKBlDUfnu9psPToVtRthXifwSgUGAMSndAh9
# Sq9Qjf5Uy5QEocRuCq82xidpAwPRw/ulAe/1nMujHnWuZXx++uJ6PCtL2+pvzkV/
# DZXP1J2elMfjRH+iy1NW/8TIZedv9mHR2qJ4XI7D/IZjpZN2NpjQSjVDapKs/SmX
# LI3kofQRT4OfZ98bhIMsZ7E0MA2i+SGtQSSfKPUqYT6298c6LefHINk9zZsMO8bR
# M4XKDS4yX9gNpM/j2LyxkL/gkMToHKVxmBJFNbC9DAo9AOJ/+iMnUFYT9F7J67jW
# LZwr490K73I1bORbrYStqnAnw0OEuzGVcehOrj7CzIuoy6nGc0yx1YeVDA8HT83Z
# WjCej+TOiDfKnq450VJ5r+CXBDMvwMzls5q5SVEjRN0vtQ04eXPNteUSHrvPLx7q
# tCTs7nzge5hUUZ5Yx5/uIs+341iMMq+U9JMLF71IFEqeIYUxHA0=
# =ubfO
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Oct 2025 05:43:34 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
* tag 'pull-aspeed-20251013' of https://github.com/legoater/qemu: (29 commits)
hw/arm/aspeed_ast27x0-{ssp,tsp}: Fix coding style
hw/arm/aspeed_ast27x0-tsp: Rename type to TYPE_ASPEED27X0TSP_COPROCESSOR
hw/arm/aspeed_ast27x0-ssp: Rename type to TYPE_ASPEED27X0SSP_COPROCESSOR
hw/arm/aspeed_ast27x0-tsp: Change to use Aspeed27x0CoprocessorState
hw/arm/aspeed_ast27x0-ssp: Change to use Aspeed27x0CoprocessorState
hw/arm/aspeed_ast27x0-tsp: Make AST27x0 TSP inherit from AspeedCoprocessor instead of AspeedSoC
hw/arm/aspeed_ast27x0-ssp: Make AST27x0 SSP inherit from AspeedCoprocessor instead of AspeedSoC
hw/arm/aspeed: Introduce AspeedCoprocessor class and base implementation
hw/arm/aspeed: Remove the aspeed_soc_get_irq and class get_irq hook
hw/arm/aspeed: Remove AspeedSoCState dependency from aspeed_soc_uart_realize() API
hw/arm/aspeed: Remove AspeedSoCState dependency from aspeed_mmio_map_unimplemented() API
hw/arm/aspeed: Remove AspeedSoCState dependency from aspeed_mmio_map() API
hw/arm/aspeed: Remove AspeedSoCClass dependency from aspeed_soc_cpu_type() API
hw/arm/aspeed: Remove AspeedSoCState dependency from aspeed_soc_uart_set_chr() API
hw/arm/aspeed: Remove AspeedSoCClass dependency from aspeed_uart_last() API
hw/arm/aspeed: Remove AspeedSoCState dependency from aspeed_uart_first() API
test/functional/aarch64: Split the ast2700a1-evb OpenBMC boot test
test/functional/aarch64: Remove test for the ast2700a0-evb machine
aspeed: Deprecate the fp5280g2-bmc machine
aspeed: Deprecate the qcom-dc-scm-v1-bmc and qcom-firework-bmc machines
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is most likely desirable, and is the easiest way to migrate
a bit-sized value without peeking at the innards of the bilge crate.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a macro that recursively builds the "migrated" version
of a struct.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of dealing with pre/post callbacks, allow devices to
implement a snapshot/restore mechanism; this has two main
advantages:
- it can be easily implemented via procedural macros
- there can be generic implementations to deal with various
kinds of interior-mutable containers, from BqlRefCell to Mutex,
so that C code does not see Rust concepts such as Mutex<>.
Using it is easy; you can implement the snapshot/restore trait
ToMigrationState and declare your state like:
regs: Migratable<Mutex<MyDeviceRegisters>>
Migratable<> allows dereferencing to the underlying object with
no run-time cost.
Note that Migratable<> actually does not accept ToMigrationState,
only the similar ToMigrationStateShared trait that the user will mostly
not care about. This is required by the fact that pre/post callbacks
take a &self, and ensures that the argument is a Mutex or BqlRefCell
(including an array or Arc<> thereof).
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The high-level wrapper Migratable<T> will contain a BqlCell,
which would introduce a circular dependency betwen the bql and
migration crates. Move the implementation of VMState for cells
to "migration", together with the implementation for std types.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is useful when building a VMState for generic structs, because you have
to avoid nested statics. Using vmstate_fields! will fail in the likely case
where the _FIELDS static uses Self from an outer item, because that is
forbidden.
The separate macros are needed because you cannot just do
.fields(vmstate_fields_ref! {
vmstate_of!(PL011State, clock),
})
The value returned by vmstate_fields_ref! is not promoted to static, which is
unfortunate but intentional (https://github.com/rust-lang/rust/issues/60502):
error[E0716]: temporary value dropped while borrowed
--> rust/hw/char/pl011/libpl011.rlib.p/structured/device.rs:743:17
|
738 | / VMStateDescriptionBuilder::<PL011State>::new()
739 | | .name(c"pl011/clock")
740 | | .version_id(1)
741 | | .minimum_version_id(1)
742 | | .needed(&PL011State::clock_needed)
743 | | .fields(vmstate_fields_ref! {
| | _________________^
744 | || vmstate_of!(PL011State, clock),
745 | || })
| ||_________^- argument requires that borrow lasts for `'static`
| |_________|
| creates a temporary value which is freed while still in use
746 | .build();
| - temporary value is freed at the end of this statement
Thus it is necessary to use the "static", whether explicitly or hidden by
vmstate_fields.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For consistency with fields(), validate the value (at least to some extent)
before passing it to C.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Raw pointers were used to insert a NULL one at the end of the array.
However, Option<&...> has the same layout and does not remove Sync
from the type of the array.
As an extra benefit, this enables validation of the terminator of the
subsection array, because is_null() in const context would not be stable
until Rust 1.84.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>