This updates kernel headers to commit 6f627b425378 ("KVM: SVM: Add module
parameter to enable SEV-SNP", 2024-05-12). The SNP host patches will
be included in Linux 6.11, to be released next July.
Also brings in an linux-headers/linux/vhost.h fix from v6.9-rc4.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-3-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux has <misc/pvpanic.h>, not <linux/pvpanic.h>. Use the same
directory for QEMU's include/standard-headers/ copy.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Afer commit 3efc75ad9d ("scripts/update-linux-headers.sh: Remove
temporary directory inbetween", 2024-05-29), updating linux-headers/
results in errors such as
cp: cannot stat '/tmp/tmp.1A1Eejh1UE/headers/include/asm/bitsperlong.h': No such file or directory
because Loongarch does not have an asm/bitsperlong.h file and uses the
generic version. Before commit 3efc75ad9d, the missing file would
incorrectly cause stale files to be included in linux-headers/. The files
were never committed to qemu.git, but were wrong nevertheless. The build
would just use the system version of the files, which is opposite to
the idea of importing Linux header files into QEMU's tree.
Create forwarding headers, resembling the ones that are generated during a
kernel build by scripts/Makefile.asm-generic, if a file is only installed
under include/asm-generic/.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xsave.flat checks that "executing the XSETBV instruction causes a general-
protection fault (#GP) if ECX = 0 and EAX[2:1] has the value 10b". QEMU allows
that option, so the test fails. Add the condition.
Cc: qemu-stable@nongnu.org
Fixes: 892544317f ("target/i386: implement XSAVE and XRSTOR of AVX registers", 2022-10-18)
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit fixes an issue with MOV instructions (0x8C and 0x8E)
involving segment registers; MOV to segment register's source is
16-bit, while MOV from segment register has to explicitly set the
memory operand size to 16 bits. Introduce a new flag
X86_SPECIAL_Op0_Mw to handle this specification correctly.
Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Message-ID: <20240602100528.2135717-1-lixinyu20s@ict.ac.cn>
Fixes: 5e9e21bcc4 ("target/i386: move 60-BF opcodes to new decoder", 2024-05-07)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU now requires an x86-64-v2 host, which has the POPCNT instruction.
Use it freely in TCG-generated code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU now requires an x86-64-v2 host, which has SSSE3 instructions
(notably, PSHUFB which is used by QEMU's AES implementation).
Do not bother checking it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU now requires an x86-64-v2 host, which has SSE2.
Use it freely in buffer_is_zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU now requires an x86-64-v2 host, which always has CMOV.
Use it freely in TCG generated code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86-64-v2 processors were released in 2008, assume that we have one.
Unfortunately there is no GCC flag to enable all the features
without disabling what came after; so enable them one by one.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only user was the SSE4.1 variant of buffer_is_zero, which has
been removed; code to compute CPUINFO_SSE4 is dead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The legacy SCSI passthrough functionality has never been enabled for
VIRTIO 1.0 and was deprecated more than four years ago.
Get rid of it---almost, because QEMU is advertising it unconditionally
for legacy virtio-blk devices. Just parse the header and return a
nonzero status.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw/ufs patches
- Add support MCQ of UFSHCI 4.0
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmZdf7EACgkQEuIgTA5d
# tgLI8Q//SXqscGTP/FrjaUj0SsQE90E0AEEfIX4juVP8e1FiFcM9x6tmEU/CT5CM
# BQYk1zn0d3JY09ClIyr+AlVyy5RYMdlL/LyhGElxU0MPZh6u4X/6QJ/oHcxAx96r
# sRGSjJp5k2maHXgjQmqVUFkp22SZGt5vpD+AQT83wvuWshL302b3MDJ8B3f9zX90
# mCcwSmk+JgSjceaXueuBAbOJud6Ie3jAqXf4w8Gv21nLwzRmDBacjfn5LGSVzQxd
# BLkADuwRcRkxQ9hpoCPWOdKvXCAXtTIYqw8BRCG7Avl478UDI+CrYNjvK62SystM
# el2ql5ZvGjL8w+k7aQxqJi44RyQH3k1NJwvss3pdRyJzwL9x9pVRVlsM6tQbW56u
# COVexJnKDoufWmQs7o6rOv5OzexC6cD6yEoH2mi60F35jO8j3skJi1od7ehHwbzm
# 2a6dt1glBKvRWgfcLgEGuFERji3vV++9T6bAg8To0GYTryZKZzLKMSbIHvYI/49t
# u4ZwqhYkp36gpcQ8eA7Byr5FWd19UzEin6sVw3uCYibr6oONFTjp+XXnFz/LK9Fu
# XbrSOe8943FCUs9dCBHHtJFLmw4j1Ck60GpnogFkzjPEhlKDHO8+4/lm1gFgPV2h
# K2wqmq5kw8JtTKvHSDGa4iGTfJ/zxMOv1ePc3wiulwSH28kl6r8=
# =dQMQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Jun 2024 03:32:49 AM CDT
# gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602
# gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown]
# gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602
* tag 'pull-ufs-20240603' of https://gitlab.com/jeuk20.kim/qemu:
hw/ufs: Add support MCQ of UFSHCI 4.0
hw/ufs: Update MCQ-related fields to block/ufs.h
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds support for MCQ defined in UFSHCI 4.0. This patch
utilized the legacy I/O codes as much as possible to support MCQ.
MCQ operation & runtime register is placed at 0x1000 offset of UFSHCI
register statically with no spare space among four registers (48B):
UfsMcqSqReg, UfsMcqSqIntReg, UfsMcqCqReg, UfsMcqCqIntReg
The maxinum number of queue is 32 as per spec, and the default
MAC(Multiple Active Commands) are 32 in the device.
Example:
-device ufs,serial=foo,id=ufs0,mcq=true,mcq-maxq=8
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-3-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in a register. The instructions will wait for an interrupt/event as
usual, but will also stop waiting when the value of CNTVCT_EL0 is
greater than or equal to the specified timeout value.
We implement WFIT by setting up a timer to expire at the right
point; when the timer expires it sets the EXITTB interrupt, which
will cause the CPU to leave the halted state. If we come out of
halt for some other reason, we unset the pending timer.
We implement WFET as a nop, which is architecturally permitted and
matches the way we currently make WFE a nop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-3-peter.maydell@linaro.org
The TCGCPUOps::cpu_exec_halt method is called from cpu_handle_halt()
when the CPU is halted, so that a target CPU emulation can do
anything target-specific it needs to do. (At the moment we only use
this on i386.)
The current specification of the method doesn't allow the target
specific code to do something different if the CPU is about to come
out of the halt state, because cpu_handle_halt() only determines this
after the method has returned. (If the method called cpu_has_work()
itself this would introduce a potential race if an interrupt arrived
between the target's method implementation checking and
cpu_handle_halt() repeating the check.)
Change the definition of the method so that it returns a bool to
tell cpu_handle_halt() whether to stay in halt or not.
We will want this for the Arm target, where FEAT_WFxT wants to do
some work only for the case where the CPU is in halt but about to
leave it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-2-peter.maydell@linaro.org
The board list in target-arm.rst is supposed to be in alphabetical
order by the title text of each file (which is not the same as
alphabetical order by filename). A few items had got out of order;
correct them.
The entry for
"Facebook Yosemite v3.5 Platform and CraterLake Server (fby35)"
remains out-of-order, because this is not its own file
but is currently part of the aspeed.rst file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240520141421.1895138-1-peter.maydell@linaro.org
Pankaj GuptaandPaolo Bonzini
Zhao LiuandPaolo Bonzini
Xinyu LiandPaolo Bonzini
Richard Henderson
Minwoo ImandJeuk Kim
David HubbardandPeter Maydell
Marcin JuszkiewiczandPeter Maydell