We have a variant for all hardware queues, but not one for a single
hardware queue.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Instead of allocating a single unused biovec for discard requests, send
them down without any payload. Instead we allow the driver to add a
"special" payload using a biovec embedded into struct request (unioned
over other fields never used while in the driver), and overloading
the number of segments for this case.
This has a couple of advantages:
- we don't have to allocate the bio_vec
- the amount of special casing for discard requests in the block
layer is significantly reduced
- using this same scheme for other request types is trivial,
which will be important for implementing the new WRITE_ZEROES
op on devices where it actually requires a payload (e.g. SCSI)
- we can get rid of playing games with the request length, as
we'll never touch it and completions will work just fine
- it will allow us to support ranged discard operations in the
future by merging non-contiguous discard bios into a single
request
- last but not least it removes a lot of code
This patch is the common base for my WIP series for ranges discards and to
remove discard_zeroes_data in favor of always using REQ_OP_WRITE_ZEROES,
so it would be good to get it in quickly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Both of these are metadata only commands that are not issued by the
writeback code and not directly relevant to the writeback bandwith.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
While doing stress tests we noticed that we'd get a lot of dmesg spam if
we suddenly disconnected the nbd device out of band. Rate limit the
messages in the io path in order to deal with this.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If an app exits before running NBD_DO_IT but after adding sockets we can
end up not being allowed to do a new nbd device. Fix this by making
NBD_CLEAR_SOCK reset the setup_task.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Sagi writes:
The major addition here is the nvme FC transport implementation
from James.
What else:
- some cleanups and memory leak fixes in the host side fabrics code from Bart
- possible rcu violation fix from Sasha
- logging change from Max
- small include cleanup
Add FC LLDD loopback driver to test FC host and target transport within
nvme-fabrics
To aid in the development and testing of the lower-level api of the FC
transport, this loopback driver has been created to act as if it were a
FC hba driver supporting both the host interfaces as well as the target
interfaces with the nvme FC transport.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Implements the FC-NVME T11 definition of how nvme fabric capsules are
performed on an FC fabric. Utilizes a lower-layer API to FC host adapters
to send/receive FC-4 LS operations and perform the FCP transactions
necessary to perform and FCP IO request for NVME.
The T11 definitions for FC-4 Link Services are implemented which create
NVMeOF connections. Implements the hooks with nvmet layer to pass NVME
commands to it for processing and posting of data/response base to the
host via the different connections.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Implements the FC-NVME T11 definition of how nvme fabric capsules are
performed on an FC fabric. Utilizes a lower-layer API to FC host adapters
to send/receive FC-4 LS operations and FCP operations that comprise NVME
over FC operation.
The T11 definitions for FC-4 Link Services are implemented which create
NVMeOF connections. Implements the hooks with blk-mq to then submit admin
and io requests to the different connections.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Host:
- LLDD registration with the host transport
- registering host ports (local ports) and target ports seen on
fabric (remote ports)
- Data structures and call points for FC-4 LS's and FCP IO requests
Target:
- LLDD registration with the target transport
- registering nvme subsystem ports (target ports)
- Data structures and call points for reception of FC-4 LS's and
FCP IO requests, and callbacks to perform data and rsp transfers
for the io.
Add to MAINTAINERS file
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently, core.c sets command_id only on rd/wr commands, leaving it to
the transport to set it again to ensure the request had a command id.
Move location of set in core so applies to all commands.
Remove transport sets.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Will be used by the nvme-fabrics FC transport in parsing options
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When removing a namespace we delete it from the subsystem namespaces
list with list_del_init which allows us to know if it is enabled or
not.
The problem is that list_del_init initialize the list next and does
not respect the RCU list-traversal we do on the IO path for locating
a namespace. Instead we need to use list_del_rcu which is allowed to
run concurrently with the _rcu list-traversal primitives (keeps list
next intact) and guarantees concurrent nvmet_find_naespace forward
progress.
By changing that, we cannot rely on ns->dev_link for knowing if the
namspace is enabled, so add enabled indicator entry to nvmet_ns for
that.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Solganik Alexander <sashas@lightbitslabs.com>
Cc: <stable@vger.kernel.org> # v4.8+
Queue size needs to respect the Maximum Queue Entries Supported advertised by
the controller in its Capability register.
Signed-off-by: Samuel Jones <sjones@kalray.eu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[sagig: fixed queue_size adjustment according to
Daniel Verkamp <daniel.verkamp@intel.com> comment]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Jens Axboe
Christoph Hellwig
Josef Bacik
James Smart
James Smart
Max Gurtovoy
Sagi Grimberg
Bart Van Assche
Solganik Alexander
Samuel Jones