Pull RTC updates from Alexandre Belloni:
"Setting the supported range from drivers for RTCs failing soon has
started. A few fixes are developed along the way. Some drivers have
been switched to SPDX by their maintainers.
Subsystem:
- rework of the rtc-test driver which allows to test the core more
thoroughly
- rtc_set_alarm() now fails early when alarms are not supported
Drivers:
- mktime() is now replaced by mktime64()
- RTC range added for 88pm80x, ab-b5ze-s3, at91rm9200,
brcmstb-waketimer, ds1685, ftrtc010, ls1x, mxc_v2, rx8581, sprd,
st-lpc, tps6586x, tps65910 and vr41xx
- fixed a possible race condition in probe functions
- pxa: fix the probe function that is broken since v4.3
- stm32: now supports stm32mp1"
* tag 'rtc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (78 commits)
rtc: pxa: fix probe function
rtc: cros-ec: Switch to SPDX identifier.
rtc: cros-ec: Make license text and module license match.
rtc: ensure rtc_set_alarm fails when alarms are not supported
rtc: test: remove alarm support from the first device
rtc: test: convert to devm_rtc_allocate_device
rtc: ftrtc010: let the core handle range
rtc: ftrtc010: handle dates after 2106
rtc: ftrtc010: switch to devm_rtc_allocate_device
rtc: mrst: switch to devm functions
rtc: sunxi: fix possible race condition
rtc: test: remove irq sysfs file
rtc: test: emulate alarms using timers
rtc: test: store time as an offset to system time
rtc: test: allow registering many devices
rtc: test: remove useless proc info
rtc: ds1685: Add range
rtc: ds1685: fix possible race condition
rtc: sprd: Add new RTC power down check method
rtc: sun6i: Fix bit_idx value for clk_register_gate
...
Pull UBI and UBIFS updates from Richard Weinberger:
- the UBI on-disk format header file is now dual licensed
- new way to detect Fastmap problems during runtime
- bugfix for Fastmap
- minor updates for UBIFS (spelling, comments, vm_fault_t, ...)
* tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifs:
mtd: ubi: Update ubi-media.h to dual license
ubi: fastmap: Detect EBA mismatches on-the-fly
ubi: fastmap: Check each mapping only once
ubi: fastmap: Correctly handle interrupted erasures in EBA
ubi: fastmap: Cancel work upon detach
ubifs: lpt: Fix wrong pnode number range in comment
ubifs: gc: Fix typo
ubifs: log: Some spelling fixes
ubifs: Spelling fix someting -> something
ubifs: journal: Remove wrong comment
ubifs: remove set but never used variable
ubifs, xattr: remove misguided quota flags
fs: ubifs: Adding new return type vm_fault_t
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx.
In the absence of Nic, we're also taking target updates which are
mostly minor except for the tcmu refactor.
The only real core change to worry about is the removal of high page
bouncing (in sas, storvsc and iscsi). This has been well tested and no
problems have shown up so far"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
scsi: lpfc: update driver version to 12.0.0.4
scsi: lpfc: Fix port initialization failure.
scsi: lpfc: Fix 16gb hbas failing cq create.
scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
scsi: lpfc: correct oversubscription of nvme io requests for an adapter
scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
scsi: hisi_sas: Mark PHY as in reset for nexus reset
scsi: hisi_sas: Fix return value when get_free_slot() failed
scsi: hisi_sas: Terminate STP reject quickly for v2 hw
scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
scsi: hisi_sas: Try wait commands before before controller reset
scsi: hisi_sas: Init disks after controller reset
scsi: hisi_sas: Create a scsi_host_template per HW module
scsi: hisi_sas: Reset disks when discovered
scsi: hisi_sas: Add LED feature for v3 hw
scsi: hisi_sas: Change common allocation mode of device id
scsi: hisi_sas: change slot index allocation mode
scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
...
Pull cifs fixes from Steve French:
- one smb3 (ACL related) fix for stable
- one SMB3 security enhancement (when mounting -t smb3 forbid less
secure dialects)
- some RDMA and compounding fixes
* tag '4.18-fixes-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix a buffer leak in smb2_query_symlink
smb3: do not allow insecure cifs mounts when using smb3
CIFS: Fix NULL ptr deref
CIFS: fix encryption in SMB3.1.1
CIFS: Pass page offset for encrypting
CIFS: Pass page offset for calculating signature
CIFS: SMBD: Support page offset in memory registration
CIFS: SMBD: Support page offset in RDMA recv
CIFS: SMBD: Support page offset in RDMA send
CIFS: When sending data on socket, pass the correct page offset
CIFS: Introduce helper function to get page offset and length in smb_rqst
CIFS: Calculate the correct request length based on page offset and tail size
cifs: For SMB2 security informaion query, check for minimum sized security descriptor instead of sizeof FileAllInformation class
CIFS: Fix signing for SMB2/3
Pull block flush handling fix from Jens Axboe:
"Single fix that we should merge now, fixing a regression in queuing
flush request, accessing request flags after calling the end_request
handler"
* tag 'for-linus-20180610' of git://git.kernel.dk/linux-block:
block: fix use-after-free in block flush handling
Pull restartable sequence support from Thomas Gleixner:
"The restartable sequences syscall (finally):
After a lot of back and forth discussion and massive delays caused by
the speculative distraction of maintainers, the core set of
restartable sequences has finally reached a consensus.
It comes with the basic non disputed core implementation along with
support for arm, powerpc and x86 and a full set of selftests
It was exposed to linux-next earlier this week, so it does not fully
comply with the merge window requirements, but there is really no
point to drag it out for yet another cycle"
* 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Provide Makefile, scripts, gitignore
rseq/selftests: Provide parametrized tests
rseq/selftests: Provide basic percpu ops test
rseq/selftests: Provide basic test
rseq/selftests: Provide rseq library
selftests/lib.mk: Introduce OVERRIDE_TARGETS
powerpc: Wire up restartable sequences system call
powerpc: Add syscall detection for restartable sequences
powerpc: Add support for restartable sequences
x86: Wire up restartable sequence system call
x86: Add support for restartable sequences
arm: Wire up restartable sequences system call
arm: Add syscall detection for restartable sequences
arm: Add restartable sequences support
rseq: Introduce restartable sequences system call
uapi/headers: Provide types_32_64.h
Pull x86 updates and fixes from Thomas Gleixner:
- Fix the (late) fallout from the vector management rework causing
hlist corruption and irq descriptor reference leaks caused by a
missing sanity check.
The straight forward fix triggered another long standing issue to
surface. The pre rework code hid the issue due to being way slower,
but now the chance that user space sees an EBUSY error return when
updating irq affinities is way higher, though quite a bunch of
userspace tools do not handle it properly despite the fact that EBUSY
could be returned for at least 10 years.
It turned out that the EBUSY return can be avoided completely by
utilizing the existing delayed affinity update mechanism for irq
remapped scenarios as well. That's a bit more error handling in the
kernel, but avoids fruitless fingerpointing discussions with tool
developers.
- Decouple PHYSICAL_MASK from AMD SME as its going to be required for
the upcoming Intel memory encryption support as well.
- Handle legacy device ACPI detection properly for newer platforms
- Fix the wrong argument ordering in the vector allocation tracepoint
- Simplify the IDT setup code for the APIC=n case
- Use the proper string helpers in the MTRR code
- Remove a stale unused VDSO source file
- Convert the microcode update lock to a raw spinlock as its used in
atomic context.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Enable CMT and MBM on new Skylake stepping
x86/apic/vector: Print APIC control bits in debugfs
genirq/affinity: Defer affinity setting if irq chip is busy
x86/platform/uv: Use apic_ack_irq()
x86/ioapic: Use apic_ack_irq()
irq_remapping: Use apic_ack_irq()
x86/apic: Provide apic_ack_irq()
genirq/migration: Avoid out of line call if pending is not set
genirq/generic_pending: Do not lose pending affinity update
x86/apic/vector: Prevent hlist corruption and leaks
x86/vector: Fix the args of vector_alloc tracepoint
x86/idt: Simplify the idt_setup_apic_and_irq_gates()
x86/platform/uv: Remove extra parentheses
x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME
x86: Mark native_set_p4d() as __always_inline
x86/microcode: Make the late update update_lock a raw lock for RT
x86/mtrr: Convert to use strncpy_from_user() helper
x86/mtrr: Convert to use match_string() helper
x86/vdso: Remove unused file
x86/i8237: Register device based on FADT legacy boot flag
Pull x86 pti updates from Thomas Gleixner:
"Three small commits updating the SSB mitigation to take the updated
AMD mitigation variants into account"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Switch the selection of mitigation from CPU vendor to CPU features
x86/bugs: Add AMD's SPEC_CTRL MSR usage
x86/bugs: Add AMD's variant of SSB_NO
Pull more perf tooling updates from Thomas Gleixner:
"Perf tool updates and fixes:
perf stat:
- Display user and system time for workload targets (Jiri Olsa)
perf record:
- Enable arbitrary event names thru name= modifier (Alexey Budankov)
PowerPC:
- Add a python script for hypervisor call statistics (Ravi Bangoria)
Intel PT: (Adrian Hunter)
- Fix sync_switch INTEL_PT_SS_NOT_TRACING
- Fix decoding to accept CBR between FUP and corresponding TIP
- Fix MTC timing after overflow
- Fix "Unexpected indirect branch" error
perf test:
- record+probe_libc_inet_pton:
- To get the symbol table for dynamic shared objects on ubuntu we
need to pass the -D/--dynamic command line option, unlike with
the fedora distros (Arnaldo Carvalho de Melo)
- code-reading:
- Fix perf_env setup for PTI entry trampolines (Adrian Hunter)
- kmod-path:
- Add tests for vdso32 and vdsox32 (Adrian Hunter)
- Use header file util/debug.h (Thomas Richter)
perf annotate:
- Make the various UI backends (stdio, TUI, gtk) use more
consistently structs with annotation options as specified by the
user (Arnaldo Carvalho de Melo)
- Move annotation specific knobs from the symbol_conf global kitchen
sink to the annotation option structs (Arnaldo Carvalho de Melo)
perf script:
- Add more PMU fields to python scripts event handler dict (Jin Yao)
Core:
- Fix misleading error for some unparsable events mentioning PMUs
when those are not involved in the problem (Jiri Olsa)
- Consider BSS symbols when processing /proc/kallsyms ('B' and 'b')
(Arnaldo Carvalho de Melo)
- Be more robust when trying to use per-symbol histograms, checking
for unlikely but possible cases where the space for the histograms
wasn't allocated, print a debug message for such cases (Arnaldo
Carvalho de Melo)
- Fix symbol and object code resolution for vdso32 and vdsox32
(Adrian Hunter)
- No need to check for null when passing pointers to foo__get() style
refcount grabbing helpers, just like in the kernel and with free(),
its safe to pass a NULL pointer to avoid having to check it before
each and every foo__get() call (Arnaldo Carvalho de Melo)
- Remove some dead code (quote.[ch]) (Arnaldo Carvalho de Melo)
- Remove some needless globals, making them local (Arnaldo Carvalho
de Melo)
- Reduce usage of symbol_conf.use_callchain, using other means of
finding out if callchains are in use or available for specific
events, as we evolved this codebase to allow requesting callchains
for just a subset of the monitored events. In time it will help
polish recording and showing mixed sets accross the various tools:
perf record -e cycles/call-graph=fp/,cache-misses/call-graph=dwarf/,instructions'
(Arnaldo Carvalho de Melo)
- Consider PTI entry trampolines in map__rip_2objdump() (Adrian
Hunter)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
perf script python: Add dict fields introduction to Documentation
perf script python: Add more PMU fields to event handler dict
perf script python: Move dsoname code to a new function
perf symbols: Add BSS symbols when reading from /proc/kallsyms
perf annnotate: Make __symbol__inc_addr_samples handle src->histograms == NULL
perf intel-pt: Fix "Unexpected indirect branch" error
perf intel-pt: Fix MTC timing after overflow
perf intel-pt: Fix decoding to accept CBR between FUP and corresponding TIP
perf intel-pt: Fix sync_switch INTEL_PT_SS_NOT_TRACING
perf script powerpc: Python script for hypervisor call statistics
perf test record+probe_libc_inet_pton: Ask 'nm' for dynamic symbols
perf map: Consider PTI entry trampolines in rip_2objdump()
perf test code-reading: Fix perf_env setup for PTI entry trampolines
perf tools: Fix pmu events parsing rule
perf stat: Display user and system time
perf record: Enable arbitrary event names thru name= modifier
perf tools: Fix symbol and object code resolution for vdso32 and vdsox32
perf tests kmod-path: Add tests for vdso32 and vdsox32
perf hists: Check if a hist_entry has callchains before using them
perf hists: Introduce hist_entry__has_callchain() method
...
Pull irq fixes from Thomas Gleixner:
"Two small fixlets:
- Add the missing iomu mapping call in the Freescale/NXP/Qualcomm/
whoever owns it now/ SCFG MSI irqchip driver. Otherwise IRQs wont
work at all.
- Fix a SMP=n build warning in the STM32 irq chip driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ls-scfg-msi: Map MSIs in the iommu
irqchip/stm32: Fix non-SMP build warning
Pull core fixes from Thomas Gleixner:
"A small set of core updates:
- Make objtool cope with GCC8 oddities some more
- Remove a stale local_irq_save/restore sequence in the signal code
along with the stale comment in the RCU code. The underlying issue
which led to this has been solved long time ago, but nobody cared
to cleanup the hackarounds"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
signal: Remove no longer required irqsave/restore
rcu: Update documentation of rcu_read_unlock()
objtool: Fix GCC 8 cold subfunction detection for aliased functions
Commit a841796f11 ("signal: align __lock_task_sighand() irq disabling and
RCU") introduced a rcu read side critical section with interrupts
disabled. The changelog suggested that a better long-term fix would be "to
make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's
->wait_lock".
This long-term fix has been made in commit b4abf91047 ("rtmutex: Make
wait_lock irq safe") for a different reason.
Therefore revert commit a841796f11 ("signal: align >
__lock_task_sighand() irq disabling and RCU") as the interrupt disable
dance is not longer required.
The change was tested on the base of b4abf91047 ("rtmutex: Make wait_lock
irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep
enabled as suggested by Paul McKenney.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
Merge proc_cmdline simplifications.
This re-writes the get_mm_cmdline() logic to be rather simpler than it
used to be, and makes the semantics for "cmdline goes past the end of
the original area" more natural.
You _can_ use prctl(PR_SET_MM) to just point your command line somewhere
else entirely, but the traditional model is to just edit things in place
and that still needs to continue to work. At least this way the code
makes some sense.
* proc-cmdline:
fs/proc: simplify and clarify get_mm_cmdline() function
fs/proc: re-factor proc_pid_cmdline_read() a bit
Use the error code EUCLEAN for filesystem errors because other
filesystems use this code too.
[ And remove unused EMEMERROR - Linus ]
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull power supply and reset updates from Sebastian Reichel:
- bq27xxx: Add BQ27426 support
- ab8500: Drop AB8540/9540 support
- Introduced new usb_type property
- Properly document the power-supply ABI
- misc. cleanups and fixes
* tag 'for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
MAINTAINERS: add entry for LEGO MINDSTORMS EV3
power: supply: ab8500_charger: fix spelling mistake: "faile" -> "failed"
power: supply: axp288_fuel_gauge: Remove polling from the driver
power: supply: axp288_fuelguage: Do not bind when the fg function is not used
power: supply: axp288_charger: Do not bind when the charge function is not used
power: supply: axp288_charger: Support 3500 and 4000 mA input current limit
power: supply: s3c-adc-battery: fix driver data initialization
power: supply: charger-manager: Verify polling interval only when polling requested
power: supply: sysfs: Use enum to specify property
power: supply: ab8500: Drop AB8540/9540 support
power: supply: ab8500_fg: fix spelling mistake: "Disharge" -> "Discharge"
power: supply: simplify getting .drvdata
power: supply: bq27xxx: Add support for BQ27426
gpio-poweroff: Use gpiod_set_value_cansleep
Pull HSI update from Sebastian Reichel:
"Just one patch for the HSI subsystem this time: use the new vm_fault_t
return type"
* tag 'hsi-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
hsi: clients: Change return type to vm_fault_t
Pull clk updates from Stephen Boyd:
"This time we have a good set of changes to the core framework that do
some general cleanups, but nothing too major. The majority of the diff
goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
introduced for Actions Semi so it takes up some lines to add all the
different types, and the Qualcomm diff is there because we add support
for two SoCs and it's quite a bit of data.
Otherwise the big driver updates are on TI Davinci and Amlogic
platforms. And then the long tail of driver updates for various fixes
and stuff follows after that.
Core:
- debugfs cleanups removing error checking and an unused provider API
- Removal of a clk init typedef that isn't used
- Usage of match_string() to simplify parent string name matching
- OF clk helpers moved to their own file (linux/of_clk.h)
- Make clk warnings more readable across kernel versions
New Drivers:
- Qualcomm SDM845 GCC and Video clk controllers
- Qualcomm MSM8998 GCC
- Actions Semi S900 SoC support
- Nuvoton npcm750 microcontroller clks
- Amlogic axg AO clock controller
Removed Drivers:
- Deprecated Rockchip clk-gate driver
Updates:
- debugfs functions stopped checking return values
- Support for the MSIOF module clocks on Rensas R-Car M3-N
- Support for the new Rensas RZ/G1C and R-Car E3 SoCs
- Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
- Berlin and Amlogic SPDX tagging
- Usage of of_clk_get_parent_count() in more places
- Proper implementation of the CDEV1/2 clocks on Tegra20
- Allwinner H6 PRCM clock support and R40 EMAC support
- Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
- Round closest support for meson's mpll driver
- Support for meson8b nand clocks and gxbb video decoder clocks
- Mediatek mali clks
- STM32MP1 fixes
- Uniphier LD11/LD20 stream demux system clock"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
clk: qcom: Export clk_fabia_pll_configure()
clk: bcm: Update and add Stingray clock entries
dt-bindings: clk: Update Stingray binding doc
clk-si544: Properly round requested frequency to nearest match
clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
clk: ingenic: jz4770: Change OTG from custom to standard gated clock
clk: ingenic: Support specifying "wait for clock stable" delay
clk: ingenic: Add support for clocks whose gate bit is inverted
clk: use match_string() helper
clk: bcm2835: use match_string() helper
clk: Return void from debug_init op
clk: remove clk_debugfs_add_file()
clk: tegra: no need to check return value of debugfs_create functions
clk: davinci: no need to check return value of debugfs_create functions
clk: bcm2835: no need to check return value of debugfs_create functions
clk: no need to check return value of debugfs_create functions
clk: imx6: add EPIT clock support
clk: mvebu: use correct bit for 98DX3236 NAND
...
Pull MD updates from Shaohua Li:
"A few fixes of MD for this merge window. Mostly bug fixes:
- raid5 stripe batch fix from Amy
- Read error handling for raid1 FailFast device from Gioh
- raid10 recovery NULL pointer dereference fix from Guoqing
- Support write hint for raid5 stripe cache from Mariusz
- Fixes for device hot add/remove from Neil and Yufen
- Improve flush bio scalability from Xiao"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
MD: fix lock contention for flush bios
md/raid5: Assigning NULL to sh->batch_head before testing bit R5_Overlap of a stripe
md/raid1: add error handling of read error from FailFast device
md: fix NULL dereference of mddev->pers in remove_and_add_spares()
raid5: copy write hint from origin bio to stripe
md: fix two problems with setting the "re-add" device state.
raid10: check bio in r10buf_pool_free to void NULL pointer dereference
md: fix an error code format and remove unsed bio_sector
Pull sparc updates from David Miller:
- a FPE signal fix that was also merged upstream
- privileged ADI driver from Tom Hromatka
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: fix compat siginfo ABI regression
selftests: sparc64: char: Selftest for privileged ADI driver
char: sparc64: Add privileged ADI driver
Pull IDE updates from David Miller:
"Primarily IRQ disabling avoidance changes from Sebastian Andrzej
Siewior"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
ide: don't enable/disable interrupts in force threaded-IRQ mode
ide: don't disable interrupts during kmap_atomic()
ide: Handle irq disabling consistently
alim15x3: move irq-restore before pci_dev_put()
Pull staging/IIO updates from Greg KH:
"Here is the big staging and IIO driver update for 4.18-rc1.
It was delayed as I wanted to make sure the final driver deletions did
not cause any major merge issues, and all now looks good.
There are a lot of patches here, just over 1000. The diffstat summary
shows the major changes here:
1007 files changed, 16828 insertions(+), 227770 deletions(-)
Because of this, we might be close to shrinking the overall kernel
source code size for two releases in a row.
There was loads of work in this release cycle, primarily:
- tons of ks7010 driver cleanups
- lots of mt7621 driver fixes and cleanups
- most driver cleanups
- wilc1000 fixes and cleanups
- lots and lots of IIO driver cleanups and new additions
- debugfs cleanups for all staging drivers
- lots of other staging driver cleanups and fixes, the shortlog has
the full details.
but the big user-visable things here are the removal of 3 chunks of
code:
- ncpfs and ipx were removed on schedule, no one has cared about this
code since it moved to staging last year, and if it needs to come
back, it can be reverted.
- lustre file system is removed.
I've ranted at the lustre developers about once a year for the past
5 years, with no real forward progress at all to clean things up
and get the code into the "real" part of the kernel.
Given that the lustre developers continue to work on an external
tree and try to port those changes to the in-kernel tree every once
in a while, this whole thing really really is not working out at
all. So I'm deleting it so that the developers can spend the time
working in their out-of-tree location and get things cleaned up
properly to get merged into the tree correctly at a later date.
Because of these file removals, you will have merge issues on some of
these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
atomisp driver). Just delete those files, it's a simple merge :)
All of this has been in linux-next for a while with no reported
problems"
* tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits)
staging: ipx: delete it from the tree
ncpfs: remove uapi .h files
ncpfs: remove Documentation
ncpfs: remove compat functionality
staging: ncpfs: delete it
staging: lustre: delete the filesystem from the tree.
staging: vc04_services: no need to save the log debufs dentries
staging: vc04_services: vchiq_debugfs_log_entry can be a void *
staging: vc04_services: remove struct vchiq_debugfs_info
staging: vc04_services: move client dbg directory into static variable
staging: vc04_services: remove odd vchiq_debugfs_top() wrapper
staging: vc04_services: no need to check debugfs return values
staging: mt7621-gpio: reorder includes alphabetically
staging: mt7621-gpio: change gc_map to don't use pointers
staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values
staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return
staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property
staging: mt7621-gpio: update #interrupt-cells for the gpio node
staging: mt7621-gpio: dt-bindings: complete documentation for the gpio
staging: mt7621-dts: add missing properties to gpio node
...
A recent commit reused the original request flags for the flush
queue handling. However, for some of the kick flush cases, the
original request was already completed. This caused a use after
free, if blk-mq wasn't used.
Fixes: 84fca1b0c4 ("block: pass failfast and driver-specific flags to flush requests")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull libnvdimm updates from Dan Williams:
"This adds a user for the new 'bytes-remaining' updates to
memcpy_mcsafe() that you already received through Ingo via the
x86-dax- for-linus pull.
Not included here, but still targeting this cycle, is support for
handling memory media errors (poison) consumed via userspace dax
mappings.
Summary:
- DAX broke a fundamental assumption of truncate of file mapped
pages. The truncate path assumed that it is safe to disconnect a
pinned page from a file and let the filesystem reclaim the physical
block. With DAX the page is equivalent to the filesystem block.
Introduce dax_layout_busy_page() to enable filesystems to wait for
pinned DAX pages to be released. Without this wait a filesystem
could allocate blocks under active device-DMA to a new file.
- DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
- Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they
are not necessary. The table indicates whether CPU caches are
power-fail protected. Clarify that a deep flush is always performed
on REQ_{FUA,PREFLUSH} requests"
* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
dax: Use dax_write_cache* helpers
libnvdimm, pmem: Do not flush power-fail protected CPU caches
libnvdimm, pmem: Unconditionally deep flush on *sync
libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
acpi, nfit: Remove ecc_unit_size
dax: dax_insert_mapping_entry always succeeds
libnvdimm, e820: Register all pmem resources
libnvdimm: Debug probe times
linvdimm, pmem: Preserve read-only setting for pmem devices
x86, nfit_test: Add unit test for memcpy_mcsafe()
pmem: Switch to copy_to_iter_mcsafe()
dax: Report bytes remaining in dax_iomap_actor()
dax: Introduce a ->copy_to_iter dax operation
uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
xfs, dax: introduce xfs_break_dax_layouts()
xfs: prepare xfs_break_layouts() for another layout type
xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
mm, fs, dax: handle layout changes to pinned dax mappings
mm: fix __gup_device_huge vs unmap
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
...
Linus Torvalds
Anna-Maria Gleixner
Mikulas Patocka
Tony Luck
Jens Axboe