Merge tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late OMAP changes from Olof Johansson:
 "This branch contains changes for OMAP that came in late during the
  release staging, close to when the merge window opened.

  It contains, among other things:

   - OMAP PM fixes and some patches for audio device integration
   - OMAP clock fixes related to common clock conversion
   - A set of patches cleaning up WFI entry and blocking.
   - A set of fixes and IP block support for PM on TI AM33xx SoCs
     (Beaglebone, etc)
   - A set of smaller fixes and cleanups around AM33xx restart and
     revision detection, as well as removal of some dead code
     (CONFIG_32K_TIMER_HZ)"

* tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: omap2: include linux/errno.h in hwmod_reset
  ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
  ARM: OMAP4: hwmod data: Enable AESS hwmod device
  ARM: OMAP4: hwmod data: Update AESS data with memory bank area
  ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
  ASoC: TI AESS: add autogating-enable function, callable from architecture code
  ARM: OMAP2+: hwmod: add enable_preprogram hook
  ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
  ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
  ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
  ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
  ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
  ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
  ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
  ARM: OMAP2+: AM33XX: Update the hardreset API
  ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
  ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
  ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
  ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
  ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
  ...

arch/arm/Kconfig

@@ -1676,7 +1676,6 @@ config HZ
 	int
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
-	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
 	default 100

arch/arm/boot/dts/am33xx.dtsi

@@ -385,5 +385,19 @@
 				mac-address = [ 00 00 00 00 00 00 ];
 			};
 		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "ti,am3352-ocmcram";
+			reg = <0x40300000 0x10000>;
+			ti,hwmods = "ocmcram";
+			ti,no_idle_on_suspend;
+		};
+
+		wkup_m3: wkup_m3@44d00000 {
+			compatible = "ti,am3353-wkup-m3";
+			reg = <0x44d00000 0x4000	/* M3 UMEM */
+			       0x44d80000 0x2000>;	/* M3 DMEM */
+			ti,hwmods = "wkup_m3";
+		};
 	};
 };

arch/arm/mach-omap2/Makefile

@@ -11,7 +11,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
 	 omap_device.o sram.o
 
 omap-2-3-common				= irq.o
-hwmod-common				= omap_hwmod.o \
+hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
 					  clkt_dpll.o clkt_clksel.o
@@ -56,6 +56,7 @@ AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 # Restart code (OMAP4/5 currently in omap4-common.c)
 obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap2-restart.o
+obj-$(CONFIG_SOC_AM33XX)		+= am33xx-restart.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap3-restart.o
 
 # Pin multiplexing

arch/arm/mach-omap2/am33xx-restart.c

@@ -0,0 +1,34 @@
+/*
+ * am33xx-restart.c - Code common to all AM33xx machines.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+
+#include "common.h"
+#include "prm-regbits-33xx.h"
+#include "prm33xx.h"
+
+/**
+ * am3xx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC.  For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c.  No return value.
+ */
+void am33xx_restart(char mode, const char *cmd)
+{
+	/* TODO: Handle mode and cmd if necessary */
+
+	am33xx_prm_rmw_reg_bits(AM33XX_GLOBAL_WARM_SW_RST_MASK,
+				AM33XX_GLOBAL_WARM_SW_RST_MASK,
+				AM33XX_PRM_DEVICE_MOD,
+				AM33XX_PRM_RSTCTRL_OFFSET);
+
+	/* OCP barrier */
+	(void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
+				  AM33XX_PRM_RSTCTRL_OFFSET);
+}

arch/arm/mach-omap2/am35xx-emac.c

@@ -62,8 +62,7 @@ static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh,
 {
 	struct platform_device *pdev;
 
-	pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len,
-				 false);
+	pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len);
 	if (IS_ERR(pdev)) {
 		WARN(1, "Can't build omap_device for %s:%s.\n",
 		     oh->class->name, oh->name);

arch/arm/mach-omap2/board-generic.c

@@ -140,6 +140,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.init_time	= omap3_am33xx_gptimer_timer_init,
 	.dt_compat	= am33xx_boards_compat,
+	.restart	= am33xx_restart,
 MACHINE_END
 #endif
 

arch/arm/mach-omap2/cclock33xx_data.c

@@ -284,9 +284,10 @@ DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
  * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
  * and ALT_CLK1/2)
  */
-DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck, 0x0,
-		   AM33XX_CM_DIV_M2_DPLL_DISP, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
+DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck,
+		   CLK_SET_RATE_PARENT, AM33XX_CM_DIV_M2_DPLL_DISP,
+		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
+		   CLK_DIVIDER_ONE_BASED, NULL);
 
 /* DPLL_PER */
 static struct dpll_data dpll_per_dd = {
@@ -723,7 +724,8 @@ static struct clk_hw_omap lcd_gclk_hw = {
 	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
 };
 
-DEFINE_STRUCT_CLK(lcd_gclk, lcd_ck_parents, gpio_fck_ops);
+DEFINE_STRUCT_CLK_FLAGS(lcd_gclk, lcd_ck_parents,
+			gpio_fck_ops, CLK_SET_RATE_PARENT);
 
 DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2);
 

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -426,6 +426,7 @@ static struct clk dpll4_m5x2_ck_3630 = {
 	.parent_names	= dpll4_m5x2_ck_parent_names,
 	.num_parents	= ARRAY_SIZE(dpll4_m5x2_ck_parent_names),
 	.ops		= &dpll4_m5x2_ck_3630_ops,
+	.flags		= CLK_SET_RATE_PARENT,
 };
 
 static struct clk cam_mclk;
@@ -443,7 +444,14 @@ static struct clk_hw_omap cam_mclk_hw = {
 	.clkdm_name	= "cam_clkdm",
 };
 
-DEFINE_STRUCT_CLK(cam_mclk, cam_mclk_parent_names, aes2_ick_ops);
+static struct clk cam_mclk = {
+	.name		= "cam_mclk",
+	.hw		= &cam_mclk_hw.hw,
+	.parent_names	= cam_mclk_parent_names,
+	.num_parents	= ARRAY_SIZE(cam_mclk_parent_names),
+	.ops		= &aes2_ick_ops,
+	.flags		= CLK_SET_RATE_PARENT,
+};
 
 static const struct clksel_rate clkout2_src_core_rates[] = {
 	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },

arch/arm/mach-omap2/cclock44xx_data.c

@@ -605,15 +605,26 @@ static const char *dpll_usb_ck_parents[] = {
 
 static struct clk dpll_usb_ck;
 
+static const struct clk_ops dpll_usb_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+	.init		= &omap2_init_clk_clkdm,
+};
+
 static struct clk_hw_omap dpll_usb_ck_hw = {
 	.hw = {
 		.clk = &dpll_usb_ck,
 	},
 	.dpll_data	= &dpll_usb_dd,
+	.clkdm_name	= "l3_init_clkdm",
 	.ops		= &clkhwops_omap3_dpll,
 };
 
-DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops);
+DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_usb_ck_ops);
 
 static const char *dpll_usb_clkdcoldo_ck_parents[] = {
 	"dpll_usb_ck",

arch/arm/mach-omap2/clock.h

@@ -65,6 +65,17 @@ struct clockdomain;
 		.ops = &_clkops_name,				\
 	};
 
+#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name,	\
+				_clkops_name, _flags)		\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _parent_array_name,		\
+		.num_parents = ARRAY_SIZE(_parent_array_name),	\
+		.ops = &_clkops_name,				\
+		.flags = _flags,				\
+	};
+
 #define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name)		\
 	static struct clk_hw_omap _name##_hw = {		\
 		.hw = {						\

arch/arm/mach-omap2/cm33xx.c

@@ -241,9 +241,6 @@ int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 

arch/arm/mach-omap2/cm33xx.h

@@ -17,16 +17,11 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_33XX_H
 
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
 #include "common.h"
 
 #include "cm.h"
 #include "cm-regbits-33xx.h"
-#include "cm33xx.h"
+#include "iomap.h"
 
 /* CM base address */
 #define AM33XX_CM_BASE		0x44e00000
@@ -381,6 +376,7 @@
 #define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020)
 
 
+#ifndef __ASSEMBLER__
 extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
 extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
 extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
@@ -417,4 +413,5 @@ static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
 }
 #endif
 
+#endif /* ASSEMBLER */
 #endif

arch/arm/mach-omap2/common.h

@@ -119,6 +119,14 @@ static inline void omap2xxx_restart(char mode, const char *cmd)
 }
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+void am33xx_restart(char mode, const char *cmd);
+#else
+static inline void am33xx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP3
 void omap3xxx_restart(char mode, const char *cmd);
 #else

arch/arm/mach-omap2/devices.c

@@ -426,7 +426,7 @@ static void __init omap_init_hdmi_audio(void)
 		return;
 	}
 
-	pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0, 0);
+	pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
 	WARN(IS_ERR(pdev),
 	     "Can't build omap_device for omap-hdmi-audio-dai.\n");
 

arch/arm/mach-omap2/dpll3xxx.c

@@ -500,8 +500,9 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 		if (dd->last_rounded_rate == 0)
 			return -EINVAL;
 
-		/* No freqsel on OMAP4 and OMAP3630 */
-		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+		/* No freqsel on AM335x, OMAP4 and OMAP3630 */
+		if (!soc_is_am33xx() && !cpu_is_omap44xx() &&
+		    !cpu_is_omap3630()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
 			WARN_ON(!freqsel);

arch/arm/mach-omap2/id.c

@@ -399,8 +399,18 @@ void __init omap3xxx_check_revision(void)
 		}
 		break;
 	case 0xb944:
-		omap_revision = AM335X_REV_ES1_0;
-		cpu_rev = "1.0";
+		switch (rev) {
+		case 0:
+			omap_revision = AM335X_REV_ES1_0;
+			cpu_rev = "1.0";
+			break;
+		case 1:
+		/* FALLTHROUGH */
+		default:
+			omap_revision = AM335X_REV_ES2_0;
+			cpu_rev = "2.0";
+			break;
+		}
 		break;
 	case 0xb8f2:
 		switch (rev) {

arch/arm/mach-omap2/omap_hwmod.c

@@ -2054,6 +2054,23 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh)
 	return oh->prcm.omap4.context_lost_counter;
 }
 
+/**
+ * _enable_preprogram - Pre-program an IP block during the _enable() process
+ * @oh: struct omap_hwmod *
+ *
+ * Some IP blocks (such as AESS) require some additional programming
+ * after enable before they can enter idle.  If a function pointer to
+ * do so is present in the hwmod data, then call it and pass along the
+ * return value; otherwise, return 0.
+ */
+static int __init _enable_preprogram(struct omap_hwmod *oh)
+{
+	if (!oh->class->enable_preprogram)
+		return 0;
+
+	return oh->class->enable_preprogram(oh);
+}
+
 /**
  * _enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
@@ -2160,6 +2177,7 @@ static int _enable(struct omap_hwmod *oh)
 				_update_sysc_cache(oh);
 			_enable_sysc(oh);
 		}
+		r = _enable_preprogram(oh);
 	} else {
 		if (soc_ops.disable_module)
 			soc_ops.disable_module(oh);
@@ -3049,11 +3067,8 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
 static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
 				     struct omap_hwmod_rst_info *ohri)
 {
-	if (ohri->st_shift)
-		pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
-		       oh->name, ohri->name);
-
 	return am33xx_prm_deassert_hardreset(ohri->rst_shift,
+				ohri->st_shift,
 				oh->clkdm->pwrdm.ptr->prcm_offs,
 				oh->prcm.omap4.rstctrl_offs,
 				oh->prcm.omap4.rstst_offs);

arch/arm/mach-omap2/omap_hwmod.h

@@ -510,6 +510,7 @@ struct omap_hwmod_omap4_prcm {
  * @rev: revision of the IP class
  * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
  * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
+ * @enable_preprogram:  ptr to fn to be executed during device enable
  *
  * Represent the class of a OMAP hardware "modules" (e.g. timer,
  * smartreflex, gpio, uart...)
@@ -533,6 +534,7 @@ struct omap_hwmod_class {
 	u32					rev;
 	int					(*pre_shutdown)(struct omap_hwmod *oh);
 	int					(*reset)(struct omap_hwmod *oh);
+	int					(*enable_preprogram)(struct omap_hwmod *oh);
 };
 
 /**
@@ -679,6 +681,12 @@ extern void __init omap_hwmod_init(void);
 
 const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
 
+/*
+ *
+ */
+
+extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -3493,7 +3493,12 @@ static struct omap_hwmod am35xx_emac_hwmod = {
 	.name		= "davinci_emac",
 	.mpu_irqs	= am35xx_emac_mpu_irqs,
 	.class		= &am35xx_emac_class,
-	.flags		= HWMOD_NO_IDLEST,
+	/*
+	 * According to Mark Greer, the MPU will not return from WFI
+	 * when the EMAC signals an interrupt.
+	 * http://www.spinics.net/lists/arm-kernel/msg174734.html
+	 */
+	.flags		= (HWMOD_NO_IDLEST | HWMOD_BLOCK_WFI),
 };
 
 /* l3_core -> davinci emac interface */