The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
* add note about forceTcpRelay
* Create a sample systemd unit for tcp proxy
* set gitattributes for rust & cargo so hashes dont conflict on Windows
* Revert "set gitattributes for rust & cargo so hashes dont conflict on Windows"
This reverts commit 032dc5c108.
* Turn off autocrlf for rust source
Doesn't appear to play nice well when it comes to git and vendored cargo package hashes
* Fix#1883 (#1886)
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
* Don't vendor packages for zeroidc (#1885)
* Added docker environment way to join networks (#1871)
* add StringUtils
* fix headers
use recommended headers and remove unused headers
* move extern "C"
only JNI functions need to be exported
* cleanup
* fix ANDROID-50: RESULT_ERROR_BAD_PARAMETER typo
* fix typo in log message
* fix typos in JNI method signatures
* fix typo
* fix ANDROID-51: fieldName is uninitialized
* fix ANDROID-35: memory leak
* fix missing DeleteLocalRef in loops
* update to use unique error codes
* add GETENV macro
* add LOG_TAG defines
* ANDROID-48: add ZT_jnicache.cpp
* ANDROID-48: use ZT_jnicache.cpp and remove ZT_jnilookup.cpp and ZT_jniarray.cpp
* add Event.fromInt
* add PeerRole.fromInt
* add ResultCode.fromInt
* fix ANDROID-36: issues with ResultCode
* add VirtualNetworkConfigOperation.fromInt
* fix ANDROID-40: VirtualNetworkConfigOperation out-of-sync with ZT_VirtualNetworkConfigOperation enum
* add VirtualNetworkStatus.fromInt
* fix ANDROID-37: VirtualNetworkStatus out-of-sync with ZT_VirtualNetworkStatus enum
* add VirtualNetworkType.fromInt
* make NodeStatus a plain data class
* fix ANDROID-52: synchronization bug with nodeMap
* Node init work: separate Node construction and init
* add Node.toString
* make PeerPhysicalPath a plain data class
* remove unused PeerPhysicalPath.fixed
* add array functions
* make Peer a plain data class
* make Version a plain data class
* fix ANDROID-42: copy/paste error
* fix ANDROID-49: VirtualNetworkConfig.equals is wrong
* reimplement VirtualNetworkConfig.equals
* reimplement VirtualNetworkConfig.compareTo
* add VirtualNetworkConfig.hashCode
* make VirtualNetworkConfig a plain data class
* remove unused VirtualNetworkConfig.enabled
* reimplement VirtualNetworkDNS.equals
* add VirtualNetworkDNS.hashCode
* make VirtualNetworkDNS a plain data class
* reimplement VirtualNetworkRoute.equals
* reimplement VirtualNetworkRoute.compareTo
* reimplement VirtualNetworkRoute.toString
* add VirtualNetworkRoute.hashCode
* make VirtualNetworkRoute a plain data class
* add isSocketAddressEmpty
* add addressPort
* add fromSocketAddressObject
* invert logic in a couple of places and return early
* newInetAddress and newInetSocketAddress work
allow newInetSocketAddress to return NULL if given empty address
* fix ANDROID-38: stack corruption in onSendPacketRequested
* use GETENV macro
* JniRef work
JniRef does not use callbacks struct, so remove
fix NewGlobalRef / DeleteGlobalRef mismatch
* use PRId64 macros
* switch statement work
* comments and logging
* Modifier 'public' is redundant for interface members
* NodeException can be made a checked Exception
* 'NodeException' does not define a 'serialVersionUID' field
* 'finalize()' should not be overridden
this is fine to do because ZeroTierOneService calls close() when it is done
* error handling, error reporting, asserts, logging
* simplify loadLibrary
* rename Node.networks -> Node.networkConfigs
* Windows file permissions fix (#1887)
* Allow macOS interfaces to use multiple IP addresses (#1879)
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Fix condition where full HELLOs might not be sent when necessary (#1877)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* 1.10.4 version bumps
* Add security policy to repo (#1889)
* [+] add e2k64 arch (#1890)
* temp fix for ANDROID-56: crash inside newNetworkConfig from too many args
* 1.10.4 release notes
---------
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
When adding Routes to zerotier's Managed Routes, the helper will
add a route rule to the device that does not have a via ip,
so that the address of the Destination segment cannot be routed
correctly within the container.
Here, based on the contents of the routes key in
`zerotier-cli -j listnetworks`,
by determining whether the via key has an ip address,
if it is not null, helper will no longer add route rules.
ARM Cryptography Extension is optional and not all ARM CPUs support it.
For example, the CPU in Raspberry Pi 4 does not support it.
Check for `__ARM_FEATURE_CRYPTO` before attempting to use the optional
extension.
`__ARM_FEATURE_CRYPTO` is defined by both clang and gcc when the target
has the cryptography extension.
Fixes#1854.
Client side:
* Fix compatibility with OneLogin
* Requested scopes vary by OIDC provider. Different providers have different
Controller side:
*Update Postgres queries to latest Central schema
* Added Central Controller support for the different providers
* Base OIDC provider details are still attached to an org. Client ID & group/email lists are now associated with individual networks.
Xcode warns about "Possible misuse of comma operator here".
Comma is a sequencing operator in C++ and original code does work, but
is highly non-idiomatic.
This patch implements a "TUNNELED" status indicator and "forceTcpRelay" setting for custom relays via local.conf.
For example:
{
"settings":
{
"tcpFallbackRelay": "6.79.53.215/443",
"forceTcpRelay":true
}
}
If you have a VM host like parallels, sometimes you get these link-local
default routes:
```
netstat -nrfinet | grep "default\|\/1"
0/1 10.2.0.12 UGScg feth4823
default 192.168.82.1 UGScg en1
0/1 192.168.82.1 UGScIg en1
default link#22 UCSIg bridge101 !
128.0/1 10.2.0.12 UGSc feth4823
128.0/1 192.168.82.1 UGScI en1
```
(the link#22 one)
The _getRTEs function inclused these routes in the list it makes as like:
device: bridge101, target: 0.0.0.0/0
If it happens to be first in the list, bridge101 gets
selected as the default route.
Then Full Tunnel Mode doesn't work.
The other routes in the list are like:
device: en1 target: 192.168.1.0/24 via: metric: 0 ifscope: 0
device: en1 target: 192.168.1.1/32 via: metric: 0 ifscope: 0
We only need the device name from this, so either one will work.
Through using ndk-build, -Wno-unused-command-line-argument is passed in
somewhere in the pipeline and hides this warning.
The warning can be turned on with:
APP_CPPFLAGS := -Wunused-command-line-argument ...
and then when building, you can see:
C/C++: clang++: warning: argument unused during compilation: '-mfloat-abi=softfp' [-Wunused-command-line-argument]
C/C++: clang++: warning: argument unused during compilation: '-mfpu=neon' [-Wunused-command-line-argument]
C/C++: clang++: warning: argument unused during compilation: '-maes' [-Wunused-command-line-argument]
These are unused because both floating-point and NEON are required in
all standard ARMv8 implementations. [1] [2]
[1] https://developer.arm.com/documentation/den0024/a/AArch64-Floating-point-and-NEON
[2] https://stackoverflow.com/a/29891469
Since NDKr15 (released 2017), unified headers are used by default [1]
Remove -isystem option that was passing bad values to command-line.
The actual value being passed to command-line was:
```
-isystem DK/sysroot/usr/include/RIPLE
```
because of using $NDK and $TRIPLE instead of $(NDK) and $(TRIPLE)
But regardless, $NDK and $TRIPLE were never actually defined values and were just
place-holders mentioned in [1]
[1] https://android.googlesource.com/platform/ndk/+/ndk-release-r16/docs/UnifiedHeaders.md
Surface Addresses are the addresses that
the roots report back to you.
This is helpful for trouble shooting.
If you're behind NAT, the source port is different
than what zerotier is bound to.
If the list of surface address ports is larger than the list of
bound addresses, you are probably behind symmetric NAT.
Anways this can be added to later with a more simple
"easy" or "hard" nat computed message somewhere.
* update entrypoint.sh
- propagate TERM/QUIT/INT signals
- add some basic logging
- check for unbound variables
- update "route helper"
- run as subshell, exit if zerotier-one is unavailable so pod can be restarted
- only call `zerotier-cli` once, avoids race conditions
- only add default routes if allowDefault is enabled for that network
- add some more error handling
- sleep after all networks are processed
* switch to polling ZT service at startup
Co-authored-by: Daniel Quinlan <dq@chaosengine.net>
redis plus plus has an annoying feature where it will open a new
connection for each tx or pipeline by default, rather than just fetching
an existing connection from the pool. Let's change that
Port used for PortMapping was not properly randomized causing multiple clients on the same lan to request the same UPnP port, and not all routers handle this gracefully.
Also fixes issue where the portmapper wasn't started at all if a secondary port wasn't specified, or if the tertiary port was manually specified.
When I first bring up the container, I want to know I'm approving the join request for the right node. I can get the node's ZT address by manually executing `zerotier-cli info` in the node (e.g. with `docker-compose exec zerotier zerotier-cli info`) but just having it in the logs to start with is very convenient.
Proactively seek, and distribute external surface addresses
This patch introduces a new "self-awareness" behavior which proactively queries peers for external surface addresses and distributes them via PUSH_DIRECT_PATHS. This has the effect of making ZT more responsive to interface changes.
Current behavior:
Previously, this type of information was only mediated via RENDEZVOUS and was only triggered when the client detected that it no longer had a single alive path to a peer. While PUSH_DIRECT_PATHS would correctly (and often) send local addresses, this was not the case for external addresses collected from response HELLOs. This would lead to situations where only one physical address would be distributed to peers. Additionally, if a new physical interface were to be made available to the client, the client would correctly bind to it but never seek information about its external mapping from a peer, and thus the new physical interface would remain unavailable for other peers to learn about until all paths on the previous interface have expired which can take a couple of minutes. In traditional usage of ZT this is not usually a problem, but it becomes a problem in the following scenarios:
Network interfaces go up and down while ZT is running (e.g. switching to LTE or WiFi from a wired connection)
Network interfaces are added or removed in multipath setups
Proposed behavior:
I propose that normal full HELLOs are sent not only on the first interface in use, but all interfaces. This causes planets to respond with a HELLO containing the surface address for each interface. We then collect each address using SelfAwareness::whoami() and distribute them via the normal PUSH_DIRECT_PATHS mechanism.
Rate gate ECHO per Path instead of per Peer
In multipath scenarios user traffic is used to judge the aliveness of a path. If the user traffic is too infrequent to establish aliveness for a given time window (say 500 ms), the bonding layer will send extra ECHOs at a maximum rate of failoverInterval / 3 (or ~ 166 ms) per path. This patch relaxes the rate-limiting of ECHOs significantly in order to prevent a non-multipath node from dropping ECHOs causing multipath nodes to erroneously judge paths to that node to be dead.
Details
This patch decreases the rate limiting from 1000 ms per peer by a factor of 6 to ~166 ms and rate limits ECHOs per Path instead of per Peer. This allows rate limiting to scale with the number of established paths to a peer.
As a result, if all 64 path slots are used a total of 64 x 6 = 384 ECHOs per second will be allowed in the most aggressive case where failoverInterval is set to 500 ms.
@@ -60,6 +60,7 @@ To ensure you have a network available before trying to listen on it. Without pr
You can control a few settings including the identity used and the authtoken used to interact with the control socket (which you can forward and access through `localhost:9993`).
-`ZEROTIER_JOIN_NETWORKS`: additional way to set networks to join.
-`ZEROTIER_API_SECRET`: replaces the `authtoken.secret` before booting and allows you to manage the control socket's authentication key.
-`ZEROTIER_IDENTITY_PUBLIC`: the `identity.public` file for zerotier-one. Use `zerotier-idtool` to generate one of these for you.
-`ZEROTIER_IDENTITY_SECRET`: the `identity.secret` file for zerotier-one. Use `zerotier-idtool` to generate one of these for you.
This document is written for a software developer audience. For information on using ZeroTier, see the: [Website](https://www.zerotier.com), [Documentation Site](https://docs.zerotier.com), and [Discussion Forum](https://discuss.zerotier.com)
*This document is written for a software developer audience. For information on using ZeroTier, see the: [Website](https://www.zerotier.com), [Documentation Site](https://docs.zerotier.com), and [Discussion Forum](https://discuss.zerotier.com).*
ZeroTier is a smart programmable Ethernet switch for planet Earth. It allows all networked devices, VMs, containers, and applications to communicate as if they all reside in the same physical data center or cloud region.
@@ -42,24 +43,29 @@ The base path contains the ZeroTier One service main entry point (`one.cpp`), se
-`rule-compiler/`: JavaScript rules language compiler for defining network-level rules.
-`service/`: the ZeroTier One service, which wraps the ZeroTier core and provides VPN-like connectivity to virtual networks for desktops, laptops, servers, VMs, and containers.
-`windows/`: Visual Studio solution files, Windows service code, and the Windows task bar app UI.
-`zeroidc/`: OIDC implementation used by ZeroTier service to log into SSO-enabled networks. (This part is written in Rust, and more Rust will be appearing in this repository in the future.)
### Build and Platform Notes
To build on Mac and Linux just type `make`. On FreeBSD and OpenBSD `gmake` (GNU make) is required and can be installed from packages or ports. For Windows there is a Visual Studio solution in `windows/`.
- **Mac**
- Xcode command line tools for OSX 10.8 or newer are required.
- Xcode command line tools for macOS 10.13 or newer are required.
- Rust for x86_64 and ARM64 targets *if SSO is enabled in the build*.
- **Linux**
- The minimum compiler versions required are GCC/G++ 4.9.3 or CLANG/CLANG++ 3.4.2. (Install `clang` on CentOS 7 as G++ is too old.)
- Linux makefiles automatically detect and prefer clang/clang++ if present as it produces smaller and slightly faster binaries in most cases. You can override by supplying CC and CXX variables on the make command line.
- Rust for x86_64 and ARM64 targets *if SSO is enabled in the build*.
- **Windows**
-Windows 7 or newer is supported. This *may* work on Vista but isn't officially supported there. It will not work on Windows XP.
-We build with Visual Studio 2017. Older versions may not work. Clang or MinGW will also probably work but may require some makefile hacking.
-Visual Studio 2022 on Windows 10 or newer.
-Rust for x86_64 and ARM64 targets *if SSO is enabled in the build*.
- **FreeBSD**
- GNU make is required. Type `gmake` to build.
- Rust for x86_64 and ARM64 targets *if SSO is enabled in the build*.
- **OpenBSD**
- There is a limit of four network memberships on OpenBSD as there are only four tap devices (`/dev/tap0` through `/dev/tap3`).
- GNU make is required. Type `gmake` to build.
- Rust for x86_64 and ARM64 targets *if SSO is enabled in the build*.
Typing `make selftest` will build a *zerotier-selftest* binary which unit tests various internals and reports on a few aspects of the build environment. It's a good idea to try this on novel platforms or architectures.
@@ -82,7 +88,7 @@ Here's where home folders live (by default) on each OS:
* **Windows**: `\ProgramData\ZeroTier\One` (That's for Windows 7. The base 'shared app data' folder might be different on different Windows versions.)
* **Windows**: `\ProgramData\ZeroTier\One` (That's the default. The base 'shared app data' folder might be different if Windows is installed with a non-standard drive letter assignment or layout.)
* SECURITY FIX (Windows): this version fixes a file permission problem on
Windows that could allow non-privileged users on a Windows system to read
privileged files in the ZeroTier service's working directory. This could
allow an unprivileged local Windows user to administrate the local ZeroTier
instance without appropriate local permissions. This issue is not remotely
exploitable unless a remote user can read arbitrary local files, and does
not impact other operating systems.
* Fix a bug in the handling of multiple IP address assignments to virtual
interfaces on macOS.
# 2023-02-15 -- Version 1.10.3
* Fix for duplicate paths in client. Could cause connectivity issues. Affects all platforms.
* Fix for Ethernet Tap MTU setting, would not properly apply on Linux.
* Fix default route bugs (macOS.)
* Enable Ping automatically for ZeroTier Adapters (Windows.)
* SSO updates and minor bugfixes.
* Add low-bandwidth mode.
* Add forceTcpRelay mode (optionally enabled.)
* Fix bug that prevented setting of custom TCP relay address.
* Build script improvements and bug fixes.
# 2022-11-01 -- Version 1.10.2
* Fix another SSO "stuck client" issue in zeroidc.
* Expose root-reported external IP/port information via the local JSON API for better diagnostics.
* Multipath: CLI output improvement for inspecting bonds
* Multipath: balance-aware mode
* Multipath: Custom policies
* Multipath: Link quality measurement improvements
Note that releases are coming few and far between because most of our dev effort is going into version 2.
# 2022-06-27 -- Version 1.10.1
* Fix an issue that could cause SSO clients to get "stuck" on stale auth URLs.
* A few other SSO related bug fixes.
# 2022-06-07 -- Version 1.10.0
* Fix formatting problem in `zerotier-cli` when using SSO networks.
* Fix a few other minor bugs in SSO signin to prepare for general availability.
* Remove requirement for webview in desktop UI and instead just make everything available via the tray pulldown/menu. Use [libui-ng](https://github.com/libui-ng/libui-ng) for minor prompt dialogs. Saves space and eliminates installation headaches on Windows.
* Fix SSO "spam" bug in desktop UI.
* Use system default browser for SSO login so all your plugins, MFA devices, password managers, etc. will work as you have them configured.
* Minor fix for bonding/multipath.
# 2022-05-10 -- Version 1.8.10
* Fixed a bug preventing SSO sign-on on Windows.
# 2022-04-25 -- Version 1.8.9
* Fixed a long-standing and strange bug that was causing sporadic "phantom" packet authentication failures. Not a security problem but could be behind sporadic reports of link failures under some conditions.
* Fized a memory leak in SSO/OIDC support.
* Fixed SSO/OIDC display error on CLI.
* Fixed a bug causing nodes to sometimes fail to push certs to each other (primarily affects SSO/OIDC use cases).
* Fixed a deadlock bug on leaving SSO/OIDC managed networks.
* Added some new Linux distributions to the build subsystem.
# 2022-04-11 -- Version 1.8.8
* Fix a local privilege escalation bug in the Windows installer.
* Dependency fix for some Ubuntu versions.
* No changes for other platforms. Windows upgrade recommended, everyone else optional.
# 2022-03-30 -- Version 1.8.7
* Fix for dependency installations in Windows MSI package.
FROM--platform=linux/${DOCKER_ARCH} alpine:edge AS builder
RUN apk update
RUN apk add curl
RUN apk add bash
RUN apk add file
RUN apk add rust
RUN apk add cargo
RUN apk add make
RUN apk add cmake
RUN apk add clang
RUN apk add openssl-dev
RUN apk add linux-headers
RUN apk add build-base
RUN apk add openssl-libs-static
COPY . .
RUNZT_STATIC=1 make one
RUN ls -la
ARG DOCKER_ARCH
FROM--platform=linux/${DOCKER_ARCH} centos:6 AS stage
WORKDIR/root/rpmbuild/BUILD
COPY . .
COPY --from=builder zerotier-one ./
RUN curl https://gist.githubusercontent.com/someara/b363002ba6e57b3c474dd027d4daef85/raw/4ac5534139752fc92fbe1a53599a390214f69615/el6%2520vault --output /etc/yum.repos.d/CentOS-Base.repo
Loaded 20 of 907 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Adam Ierymenko
Travis LaDuke
Joseph Henry
Brenton Bostick
Monica Moniot
dependabot[bot]andGrant Limberg
Joseph Henry
zwf
Gleb Mazovetskiy
Sean OMeara
grapexy
Anders Jenbo
visuve
DQandDaniel Quinlan
TossPig
David Baird
Erik Hollensbe
Sean McAvoy
fuowang
Alan Norbauer