- Remove testcontainers/testcontainers-modules dev-dependencies, orphaned
since the rust-based pubsub removal (0f6378359). This drops tokio-tar
0.3.1 (CVE-2025-62518, PAX header desynchronization) and the rest of
the bollard/docker graph from the lockfile. Resolves alert #67.
- Update serde_with 3.20.0 -> 3.21.0 (KeyValueMap serialization panic
on empty sequence/map entries). Resolves alert #68.
Template was looking for {{networkId}} but that hadn't been populated
yet in the case where the IdP returned an error. This caused the
template parsing to crash and return its own error, disguising the error
from the IdP
* Brewfile for homebrew dependencies on macos
* Pull & build google-cloud-cpp/otel via bootstrap script rather than
keeping it all in the ext/ subfolder.
* Update controller CI build with new steps
writePending() did a synchronous ReadRow per queued node to avoid
rewriting unchanged os/arch/version. With thousands of check-ins per
cycle that's thousands of sequential round-trips every 10s, and the read
was nearly pointless since last_seen and the IP cell are written every
cycle anyway.
Replace it with an in-process cache of the last-written node_info per
row (keyed by a 64-bit hash of the row key). node_info is emitted only
when changed, new, or past its refresh window; check_in is still written
every cycle. Failed rows are dropped from the cache so they're rewritten
next cycle, and stale entries are evicted (24h TTL). Net result: one
BulkApply per cycle, no read RPCs.
- Default enableBroadcast to true on load (initializeNetworks and _getNetwork) to match DB::initNetwork. Networks whose JSONB lacks the field now get broadcast on instead of off, which is the documented ZeroTier default.
- Stop overwriting networks_ctl.frontend on every UPDATE. It should remain whatever was set at INSERT. The early-exit guard already prevents cross-frontend writes from applying, so dropping the SET preserves correctness. Members are unaffected — they source frontend from the network row, not the change payload.
- Add enableBroadcast, creationTime, and revision to PubSubListener's network toJson. The protobuf carries them, but the listener was dropping them on inbound, which caused revision to reset on every PubSub-delivered network update.
- Rename member version keys to vMajor/vMinor/vRev/vProto in both PubSubListener (incoming) and PubSubWriter (outgoing). CentralDB, EmbeddedNetworkController, and the rest of the codebase already use these names; the listener/writer were the only sites using versionMajor/Minor/Rev/Protocol, so member version info was being silently dropped through PubSub in both directions.
- Pass newMember by const reference in ControllerChangeNotifier::notifyMemberChange to match notifyNetworkChange. Avoids a full JSON copy on every member notify.
- Remove duplicate nlohmann::json::parse call in RedisNetworkListener.
ssoConfig checked wrong variable
DNS missing-branch wrote to input not output
SSO fields renamed to sso* and nested under ssoConfig (across CentralDB, DB defaults, migration_models)
Member identity populated into the right field; address = memberId
noAutoAssignIPs → noAutoAssignIps casing
Member version columns now SELECTed + populated (both sites)
removeTraceLevel typo in DB.cpp defaults
8. eraseMember uninitialized tmp2 — member deletes now actually delete
9. Connection leak on continue in both commit branches
10. Unsafe (uint64_t)config["revision"] cast → OSUtils::jsonInt
11. target = "NULL" literal text → std::optional<std::string> for real SQL NULL
~13 unsafe direct json→string casts → OSUtils::jsonString; dead vars removed from save(); change_source blocks use is_string() checks.
Heartbeat zadd literal "controllerId" → variable
Network revision double-increment removed
PubSub notifier now sees actual old state (DB query moved before INSERT in both branches)
_delete_network reads config["id"] instead of config["nwid"]
ip_assignments empty-string guards added at both sites (also closes G)
ensure last_modified is set on every write to networks & members
The 10-second session.cancel() loop raced with in-flight acks — when
cancel fired while the GCP client was processing messages, acks were
lost before reaching the server. With message ordering enabled, an
unacked message blocks all subsequent messages on that ordering key,
causing silent stalls with no error output.
Two fixes:
- Replace the cancel/reconnect timer with a blocking session.get(),
storing the session future so the destructor can cancel on shutdown.
- Always ack messages even when onNotification fails — permanent errors
(bad protobuf, missing fields) will never succeed on retry and would
otherwise poison the ordering key indefinitely.
Allow controllers to advertise which central version (cv1, cv2, or all)
they are assigned to handle via a new configurable field. The value is
persisted to the database on each heartbeat and validated at startup
against the DB CHECK constraint.
Publish CTL_NONCE_UPDATE to PubSub when nonces are created or reused in
getSSOAuthInfo(), with the network's frontend as a message attribute so
only the correct CV frontend receives it. Listen for ZT1_AUTH_UPDATE
messages and update sso_expiry.authentication_expiry_time accordingly,
with a network existence check before applying.
- Add sso_send_topic/sso_recv_topic to PubSubConfig
- Add PubSubWriter::publishSSONonceUpdate() with frontend param
- Add PubSubSSOListener class for inbound auth updates
- Rename CV1_AUTH_UPDATE to ZT1_AUTH_UPDATE in sso.proto
- Fix pre-existing connection pool leak in getSSOAuthInfo() catch block
Required to get the list of configs for a particular org that the controller has. Named it `linked_id` rather than `org_id` since we don't know what it will be linked to in CV2
It's undefined to write to a buffer you're reading from in snprintf().
On modern glibc and musl versions, this results in the string
"/zerotier_dump.txt" being generated, i.e. in the root directory. Use a
new variable to hold the string dump.
This is done for MacOS as well. On Sequoia, at least, it's not
necessary, as it handles overlapping objects fine, but this is more
future-proof.
At the same time, include a specific error message when the dumpfile
can't be opened to help users track down problems. Also, truncate the
file so that new writes don't potentially leave stale data.
_enabled is set to true by setUpPostDecodeReceiveThreads(), so disabled
until then, but the constructor wasn't initializing it. _concurrency is
not being used before being set but for safety's sake, ensure it has a
starting value as well.
Also, remove the vestigial _rxThreadCount, which is no longer used.
Also for pubsub trips back to CV1/CV2, rather than having 2 queues for each service (networks & members), theres now only a single queue for each change type, and `frontend = (cv1|cv2)` attribute is set on the message for filtering.
Muuuuch easier to use external dependencies now
Also tried out conan and vcpkg. Ran into dependency issues when solving for packages to install with conan.
vcpkg is just obtuse as all hell to install and not easy to integrate
PubSub allows us to do schema validation, however it only allows one top level message at a time. Move other sub-message declarations under the main message declaration so that we can enable schema validation in the pubsub stream directly
Adds support for "linkSelectMethod" as the JSON configuration field name
while maintaining backward compatibility with the legacy "activeReselect"
field name.
This change aligns the JSON field name with the internal API naming
convention (setLinkSelectMethod/getLinkSelectMethod) and follows the
established pattern in the codebase where JSON field names match their
corresponding setter method names.
The implementation:
- Checks for the new field name first, then falls back to the legacy name
- Emits a deprecation warning when "activeReselect" is used
- Ensures existing configurations continue to work without modification
Resolves terminology inconsistency identified in docs PR #263🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
also removed some spans from the networks/members db watcher. Those will be 5 seconds long no matter what, and the underlying processes already have their own spans
* Bump version in most places.
* Update official release steps for desktop
* Version bump a bunch of Rust packages.
* Windows fix for disabling MT properly.
* Release notes.
In nixpkgs we use coreutils and do not have PWD available.
This change have any downsides on normal macOS systems, but helps
nixpkgs packaging a bit.
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
Update the minimal compilers in documentation. As `std=c++17` is used the minimal got quite bumped from last update. For gcc 7.x would seem possibly enough, but some of the dependencies (eg. libpqxx) need 8.x at least, so setting that as documented minimum.
cpp-httplib sets IPV6_V6ONLY to false on it's sockets.
On FreeBSD, this makes all ipv4 addresses get get prefixed with ::ffff:
it makes them IPv6 addresses mapped to v4.
This is a partial fix for #2151. The cli will work again.
Something should probably also be adjusted with the httplib.
If you want to, for example, use the `allowManagementFrom` option in
local.conf
you will need to prefix it with "::ffff:", "::ffff:1.2.3.4"
which is a little surprising and inconsistent between BSD and other OSs.
Want to show it in UIs. So need to get it via API.
It's also a pain to look up. You have to go to external docs.
zerotier-cli info -j
```json
"config": {
"settings": {
"allowTcpFallbackRelay": true,
"forceTcpRelay": true,
"homeDir": "/Library/Application Support/ZeroTier/One",
```
```sh
curl -s -X POST "http://localhost:9993/controller/network/abcdabcdabcdabcd/member/1122334455"
```
Would return 200 and ZT_HOME/controller.d/abcdabcdabcdabcd/members/1122334455
would be created. Without a ZT_HOME/controller.d/abcdabcdabcdabcd.json
Then other parts of the system mistakenly think a abcdabcdabcdabcd
network sorta kinda exists and then fail in weird ways.
There was as Windows directory traversal bug in the static
file server feature. We don't use that feature, so we are ok.
We are going to use that feature soon, so we are
taking the opportunity to update.
Add /unstable/controller/network endpoint
Similar to /unstable/controller/network/{id}/member, it returns actual network objects,
instead of just network ids.
Also includes the total network count,
and each network has it's member counts in meta{}.
The current api at /controller/network/1111111111767f2f/member
Lists only the members' ID and revision number.
If you want details, you have to query each specific member.
So if you want to make a members list, and you have
10000 members on a network, you need to make
10000 http requests.
It's also in a hard to specify and use shape
{ [member-id-1]: 13, [member-id-2]: 14, ... }
GET http://localhost:9993/unstable/controller/network/1111111111767f2f/member ->
```
{
data: [ {...member1}, {...member2}, ...],
meta: { totalCount: 4, authorizedCount: 3 }
}
```
It wasn't ignoring separator characters such as the colon and hyphen.
The rules compiler automatically add a colon to separate bytes, which is
not compatible with how they are parsed.
* Better compatibility with LLVM toolchain where clang -c doesn't
support the flag, but the linker does. LLD already defaults to
noexecstack, but adding it in the linker phase will avoid errors about
unsupported options.
Signed-off-by: Alfred Wingate <parona@protonmail.com>
This makes switching between physical networks
with full tunnel mode enabled more reliable.
There were issues with the physical default route or device
changing.
* 1.10.6 merge to main (#1930)
* add note about forceTcpRelay
* Create a sample systemd unit for tcp proxy
* set gitattributes for rust & cargo so hashes dont conflict on Windows
* Revert "set gitattributes for rust & cargo so hashes dont conflict on Windows"
This reverts commit 032dc5c108.
* Turn off autocrlf for rust source
Doesn't appear to play nice well when it comes to git and vendored cargo package hashes
* Fix#1883 (#1886)
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
* Don't vendor packages for zeroidc (#1885)
* Added docker environment way to join networks (#1871)
* add StringUtils
* fix headers
use recommended headers and remove unused headers
* move extern "C"
only JNI functions need to be exported
* cleanup
* fix ANDROID-50: RESULT_ERROR_BAD_PARAMETER typo
* fix typo in log message
* fix typos in JNI method signatures
* fix typo
* fix ANDROID-51: fieldName is uninitialized
* fix ANDROID-35: memory leak
* fix missing DeleteLocalRef in loops
* update to use unique error codes
* add GETENV macro
* add LOG_TAG defines
* ANDROID-48: add ZT_jnicache.cpp
* ANDROID-48: use ZT_jnicache.cpp and remove ZT_jnilookup.cpp and ZT_jniarray.cpp
* add Event.fromInt
* add PeerRole.fromInt
* add ResultCode.fromInt
* fix ANDROID-36: issues with ResultCode
* add VirtualNetworkConfigOperation.fromInt
* fix ANDROID-40: VirtualNetworkConfigOperation out-of-sync with ZT_VirtualNetworkConfigOperation enum
* add VirtualNetworkStatus.fromInt
* fix ANDROID-37: VirtualNetworkStatus out-of-sync with ZT_VirtualNetworkStatus enum
* add VirtualNetworkType.fromInt
* make NodeStatus a plain data class
* fix ANDROID-52: synchronization bug with nodeMap
* Node init work: separate Node construction and init
* add Node.toString
* make PeerPhysicalPath a plain data class
* remove unused PeerPhysicalPath.fixed
* add array functions
* make Peer a plain data class
* make Version a plain data class
* fix ANDROID-42: copy/paste error
* fix ANDROID-49: VirtualNetworkConfig.equals is wrong
* reimplement VirtualNetworkConfig.equals
* reimplement VirtualNetworkConfig.compareTo
* add VirtualNetworkConfig.hashCode
* make VirtualNetworkConfig a plain data class
* remove unused VirtualNetworkConfig.enabled
* reimplement VirtualNetworkDNS.equals
* add VirtualNetworkDNS.hashCode
* make VirtualNetworkDNS a plain data class
* reimplement VirtualNetworkRoute.equals
* reimplement VirtualNetworkRoute.compareTo
* reimplement VirtualNetworkRoute.toString
* add VirtualNetworkRoute.hashCode
* make VirtualNetworkRoute a plain data class
* add isSocketAddressEmpty
* add addressPort
* add fromSocketAddressObject
* invert logic in a couple of places and return early
* newInetAddress and newInetSocketAddress work
allow newInetSocketAddress to return NULL if given empty address
* fix ANDROID-38: stack corruption in onSendPacketRequested
* use GETENV macro
* JniRef work
JniRef does not use callbacks struct, so remove
fix NewGlobalRef / DeleteGlobalRef mismatch
* use PRId64 macros
* switch statement work
* comments and logging
* Modifier 'public' is redundant for interface members
* NodeException can be made a checked Exception
* 'NodeException' does not define a 'serialVersionUID' field
* 'finalize()' should not be overridden
this is fine to do because ZeroTierOneService calls close() when it is done
* error handling, error reporting, asserts, logging
* simplify loadLibrary
* rename Node.networks -> Node.networkConfigs
* Windows file permissions fix (#1887)
* Allow macOS interfaces to use multiple IP addresses (#1879)
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Fix condition where full HELLOs might not be sent when necessary (#1877)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* 1.10.4 version bumps
* Add security policy to repo (#1889)
* [+] add e2k64 arch (#1890)
* temp fix for ANDROID-56: crash inside newNetworkConfig from too many args
* 1.10.4 release notes
* Windows 1.10.4 Advanced Installer bump
* Revert "temp fix for ANDROID-56: crash inside newNetworkConfig from too many args"
This reverts commit dd627cd7f4.
* actual fix for ANDROID-56: crash inside newNetworkConfig
cast all arguments to varargs functions as good style
* Fix addIp being called with applied ips (#1897)
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
* 1.10.5 (#1905)
* 1.10.5 bump
* 1.10.5 for Windows
* 1.10.5
* Prevent path-learning loops (#1914)
* Prevent path-learning loops
* Only allow new overwrite if not bonded
* fix binding temporary ipv6 addresses on macos (#1910)
The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
* 1.10.6 (#1929)
* 1.10.5 bump
* 1.10.6
* 1.10.6 AIP for Windows.
---------
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
* 1.12.0 merge to main (#2104)
* add note about forceTcpRelay
* Create a sample systemd unit for tcp proxy
* set gitattributes for rust & cargo so hashes dont conflict on Windows
* Revert "set gitattributes for rust & cargo so hashes dont conflict on Windows"
This reverts commit 032dc5c108.
* Turn off autocrlf for rust source
Doesn't appear to play nice well when it comes to git and vendored cargo package hashes
* Fix#1883 (#1886)
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
* Don't vendor packages for zeroidc (#1885)
* Added docker environment way to join networks (#1871)
* add StringUtils
* fix headers
use recommended headers and remove unused headers
* move extern "C"
only JNI functions need to be exported
* cleanup
* fix ANDROID-50: RESULT_ERROR_BAD_PARAMETER typo
* fix typo in log message
* fix typos in JNI method signatures
* fix typo
* fix ANDROID-51: fieldName is uninitialized
* fix ANDROID-35: memory leak
* fix missing DeleteLocalRef in loops
* update to use unique error codes
* add GETENV macro
* add LOG_TAG defines
* ANDROID-48: add ZT_jnicache.cpp
* ANDROID-48: use ZT_jnicache.cpp and remove ZT_jnilookup.cpp and ZT_jniarray.cpp
* add Event.fromInt
* add PeerRole.fromInt
* add ResultCode.fromInt
* fix ANDROID-36: issues with ResultCode
* add VirtualNetworkConfigOperation.fromInt
* fix ANDROID-40: VirtualNetworkConfigOperation out-of-sync with ZT_VirtualNetworkConfigOperation enum
* add VirtualNetworkStatus.fromInt
* fix ANDROID-37: VirtualNetworkStatus out-of-sync with ZT_VirtualNetworkStatus enum
* add VirtualNetworkType.fromInt
* make NodeStatus a plain data class
* fix ANDROID-52: synchronization bug with nodeMap
* Node init work: separate Node construction and init
* add Node.toString
* make PeerPhysicalPath a plain data class
* remove unused PeerPhysicalPath.fixed
* add array functions
* make Peer a plain data class
* make Version a plain data class
* fix ANDROID-42: copy/paste error
* fix ANDROID-49: VirtualNetworkConfig.equals is wrong
* reimplement VirtualNetworkConfig.equals
* reimplement VirtualNetworkConfig.compareTo
* add VirtualNetworkConfig.hashCode
* make VirtualNetworkConfig a plain data class
* remove unused VirtualNetworkConfig.enabled
* reimplement VirtualNetworkDNS.equals
* add VirtualNetworkDNS.hashCode
* make VirtualNetworkDNS a plain data class
* reimplement VirtualNetworkRoute.equals
* reimplement VirtualNetworkRoute.compareTo
* reimplement VirtualNetworkRoute.toString
* add VirtualNetworkRoute.hashCode
* make VirtualNetworkRoute a plain data class
* add isSocketAddressEmpty
* add addressPort
* add fromSocketAddressObject
* invert logic in a couple of places and return early
* newInetAddress and newInetSocketAddress work
allow newInetSocketAddress to return NULL if given empty address
* fix ANDROID-38: stack corruption in onSendPacketRequested
* use GETENV macro
* JniRef work
JniRef does not use callbacks struct, so remove
fix NewGlobalRef / DeleteGlobalRef mismatch
* use PRId64 macros
* switch statement work
* comments and logging
* Modifier 'public' is redundant for interface members
* NodeException can be made a checked Exception
* 'NodeException' does not define a 'serialVersionUID' field
* 'finalize()' should not be overridden
this is fine to do because ZeroTierOneService calls close() when it is done
* error handling, error reporting, asserts, logging
* simplify loadLibrary
* rename Node.networks -> Node.networkConfigs
* Windows file permissions fix (#1887)
* Allow macOS interfaces to use multiple IP addresses (#1879)
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Fix condition where full HELLOs might not be sent when necessary (#1877)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* 1.10.4 version bumps
* Add security policy to repo (#1889)
* [+] add e2k64 arch (#1890)
* temp fix for ANDROID-56: crash inside newNetworkConfig from too many args
* 1.10.4 release notes
* Windows 1.10.4 Advanced Installer bump
* Revert "temp fix for ANDROID-56: crash inside newNetworkConfig from too many args"
This reverts commit dd627cd7f4.
* actual fix for ANDROID-56: crash inside newNetworkConfig
cast all arguments to varargs functions as good style
* Fix addIp being called with applied ips (#1897)
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
* 1.10.5 (#1905)
* 1.10.5 bump
* 1.10.5 for Windows
* 1.10.5
* Prevent path-learning loops (#1914)
* Prevent path-learning loops
* Only allow new overwrite if not bonded
* fix binding temporary ipv6 addresses on macos (#1910)
The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
* 1.10.6 (#1929)
* 1.10.5 bump
* 1.10.6
* 1.10.6 AIP for Windows.
* Release notes for 1.10.6 (#1931)
* Minor tweak to Synology Docker image script (#1936)
* Change if_def again so ios can build (#1937)
All apple's variables are "defined"
but sometimes they are defined as "0"
* move begin/commit into try/catch block (#1932)
Thread was exiting in some cases
* Bump openssl from 0.10.45 to 0.10.48 in /zeroidc (#1938)
Bumps [openssl](https://github.com/sfackler/rust-openssl) from 0.10.45 to 0.10.48.
- [Release notes](https://github.com/sfackler/rust-openssl/releases)
- [Commits](https://github.com/sfackler/rust-openssl/compare/openssl-v0.10.45...openssl-v0.10.48)
---
updated-dependencies:
- dependency-name: openssl
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* new drone bits
* Fix multiple network join from environment entrypoint.sh.release (#1961)
* _bond_m guards _bond, not _paths_m (#1965)
* Fix: warning: mutex '_aqm_m' is not held on every path through here [-Wthread-safety-analysis] (#1964)
* Bump h2 from 0.3.16 to 0.3.17 in /zeroidc (#1963)
Bumps [h2](https://github.com/hyperium/h2) from 0.3.16 to 0.3.17.
- [Release notes](https://github.com/hyperium/h2/releases)
- [Changelog](https://github.com/hyperium/h2/blob/master/CHANGELOG.md)
- [Commits](https://github.com/hyperium/h2/compare/v0.3.16...v0.3.17)
---
updated-dependencies:
- dependency-name: h2
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Add note that binutils is required on FreeBSD (#1968)
* Add prometheus metrics for Central controllers (#1969)
* add header-only prometheus lib to ext
* rename folder
* Undo rename directory
* prometheus simpleapi included on mac & linux
* wip
* wire up some controller stats
* Get windows building with prometheus
* bsd build flags for prometheus
* Fix multiple network join from environment entrypoint.sh.release (#1961)
* _bond_m guards _bond, not _paths_m (#1965)
* Fix: warning: mutex '_aqm_m' is not held on every path through here [-Wthread-safety-analysis] (#1964)
* Serve prom metrics from /metrics endpoint
* Add prom metrics for Central controller specific things
* reorganize metric initialization
* testing out a labled gauge on Networks
* increment error counter on throw
* Consolidate metrics definitions
Put all metric definitions into node/Metrics.hpp. Accessed as needed
from there.
* Revert "testing out a labled gauge on Networks"
This reverts commit 499ed6d95e.
* still blows up but adding to the record for completeness right now
* Fix runtime issues with metrics
* Add metrics files to visual studio project
* Missed an "extern"
* add copyright headers to new files
* Add metrics for sent/received bytes (total)
* put /metrics endpoint behind auth
* sendto returns int on Win32
---------
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
* Central startup update (#1973)
* allow specifying authtoken in central startup
* set allowManagedFrom
* move redis_mem_notification to the correct place
* add node checkins metric
* wire up min/max connection pool size metrics
* x86_64-unknown-linux-gnu on ubuntu runner (#1975)
* adding incoming zt packet type metrics (#1976)
* use cpp-httplib for HTTP control plane (#1979)
refactored the old control plane code to use [cpp-httplib](https://github.com/yhirose/cpp-httplib) instead of a hand rolled HTTP server. Makes the control plane code much more legible. Also no longer randomly stops responding.
* Outgoing Packet Metrics (#1980)
add tx/rx labels to packet counters and add metrics for outgoing packets
* Add short-term validation test workflow (#1974)
Add short-term validation test workflow
* Brenton/curly braces (#1971)
* fix formatting
* properly adjust various lines
breakup multiple statements onto multiple lines
* insert {} around if, for, etc.
* Fix rust dependency caching (#1983)
* fun with rust caching
* kick
* comment out invalid yaml keys for now
* Caching should now work
* re-add/rename key directives
* bump
* bump
* bump
* Don't force rebuild on Windows build GH Action (#1985)
Switching `/t:ZeroTierOne:Rebuild` to just `/t:ZeroTierOne` allows the Windows build to use the rust cache. `/t:ZeroTierOne:Rebuild` cleared the cache before building.
* More packet metrics (#1982)
* found path negotation sends that weren't accounted for
* Fix histogram so it will actually compile
* Found more places for packet metrics
* separate the bind & listen calls on the http backplane (#1988)
* fix memory leak (#1992)
* fix a couple of metrics (#1989)
* More aggressive CLI spamming (#1993)
* fix type signatures (#1991)
* Network-metrics (#1994)
* Add a couple quick functions for converting a uint64_t network ID/node ID into std::string
* Network metrics
* Peer metrics (#1995)
* Adding peer metrics
still need to be wired up for use
* per peer packet metrics
* Fix crash from bad instantiation of histogram
* separate alive & dead path counts
* Add peer metric update block
* add peer latency values in doPingAndKeepalive
* prevent deadlock
* peer latency histogram actually works now
* cleanup
* capture counts of packets to specific peers
---------
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
* Metrics consolidation (#1997)
* Rename zt_packet_incoming -> zt_packet
Also consolidate zt_peer_packets into a single metric with tx and rx labels. Same for ztc_tcp_data and ztc_udp_data
* Further collapse tcp & udp into metric labels for zt_data
* Fix zt_data metric description
* zt_peer_packets description fix
* Consolidate incoming/outgoing network packets to a single metric
* zt_incoming_packet_error -> zt_packet_error
* Disable peer metrics for central controllers
Can change in the future if needed, but given the traffic our controllers serve, that's going to be a *lot* of data
* Disable peer metrics for controllers pt 2
* Update readme files for metrics (#2000)
* Controller Metrics & Network Config Request Fix (#2003)
* add new metrics for network config request queue size and sso expirations
* move sso expiration to its own thread in the controller
* fix potential undefined behavior when modifying a set
* Enable RTTI in Windows build
The new prometheus histogram stuff needs it.
Access violation - no RTTI data!INVALID packet 636ebd9ee8cac6c0 from cafe9efeb9(2605:9880:200:1200:30:571:e34:51/9993) (unexpected exception in tryDecode())
* Don't re-apply routes on BSD
See issue #1986
* Capture setContent by-value instead of by-reference (#2006)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* fix typos (#2010)
* central controller metrics & request path updates (#2012)
* internal db metrics
* use shared mutexes for read/write locks
* remove this lock. only used for a metric
* more metrics
* remove exploratory metrics
place controller request benchmarks behind ifdef
* Improve validation test (#2013)
* fix init order for EmbeddedNetworkController (#2014)
* add constant for getifaddrs cache time
* cache getifaddrs - mac
* cache getifaddrs - linux
* cache getifaddrs - bsd
* cache getifaddrs - windows
* Fix oidc client lookup query
join condition referenced the wrong table. Worked fine unless there were multiple identical client IDs
* Fix udp sent metric
was only incrementing by 1 for each packet sent
* Allow sending all surface addresses to peer in low-bandwidth mode
* allow enabling of low bandwidth mode on controllers
* don't unborrow bad connections
pool will clean them up later
* Multi-arch controller container (#2037)
create arm64 & amd64 images for central controller
* Update README.md
issue #2009
* docker tags change
* fix oidc auth url memory leak (#2031)
getAuthURL() was not calling zeroidc::free_cstr(url);
the only place authAuthURL is called, the url can be retrieved
from the network config instead.
You could alternatively copy the string and call free_cstr in getAuthURL.
If that's better we can change the PR.
Since now there are no callers of getAuthURL I deleted it.
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Bump openssl from 0.10.48 to 0.10.55 in /zeroidc (#2034)
Bumps [openssl](https://github.com/sfackler/rust-openssl) from 0.10.48 to 0.10.55.
- [Release notes](https://github.com/sfackler/rust-openssl/releases)
- [Commits](https://github.com/sfackler/rust-openssl/compare/openssl-v0.10.48...openssl-v0.10.55)
---
updated-dependencies:
- dependency-name: openssl
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* zeroidc cargo warnings (#2029)
* fix unused struct member cargo warning
* fix unused import cargo warning
* fix unused return value cargo warning
---------
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* fix memory leak in macos ipv6/dns helper (#2030)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Consider ZEROTIER_JOIN_NETWORKS in healthcheck (#1978)
* Add a 2nd auth token only for access to /metrics (#2043)
* Add a 2nd auth token for /metrics
Allows administrators to distribute a token that only has access to read
metrics and nothing else.
Also added support for using bearer auth tokens for both types of tokens
Separate endpoint for metrics #2041
* Update readme
* fix a couple of cases of writing the wrong token
* Add warning to cli for allow default on FreeBSD
It doesn't work.
Not possible to fix with deficient network
stack and APIs.
ZeroTierOne-freebsd # zerotier-cli set 9bee8941b5xxxxxx allowDefault=1
400 set Allow Default does not work properly on FreeBSD. See #580
root@freebsd13-a:~/ZeroTierOne-freebsd # zerotier-cli get 9bee8941b5xxxxxx allowDefault
1
* ARM64 Support for TapDriver6 (#1949)
* Release memory previously allocated by UPNP_GetValidIGD
* Fix ifdef that breaks libzt on iOS (#2050)
* less drone (#2060)
* Exit if loading an invalid identity from disk (#2058)
* Exit if loading an invalid identity from disk
Previously, if an invalid identity was loaded from disk, ZeroTier would
generate a new identity & chug along and generate a brand new identity
as if nothing happened. When running in containers, this introduces the
possibility for key matter loss; especially when running in containers
where the identity files are mounted in the container read only. In
this case, ZT will continue chugging along with a brand new identity
with no possibility of recovering the private key.
ZeroTier should exit upon loading of invalid identity.public/identity.secret #2056
* add validation test for #2056
* tcp-proxy: fix build
* Adjust tcp-proxy makefile to support metrics
There's no way to get the metrics yet. Someone will
have to add the http service.
* remove ZT_NO_METRIC ifdef
* Implement recvmmsg() for Linux to reduce syscalls. (#2046)
Between 5% and 40% speed improvement on Linux, depending on system configuration and load.
* suppress warnings: comparison of integers of different signs: 'int64_t' (aka 'long') and 'uint64_t' (aka 'unsigned long') [-Wsign-compare] (#2063)
* fix warning: 'OS_STRING' macro redefined [-Wmacro-redefined] (#2064)
Even though this is in ext, these particular chunks of code were added
by us, so are ok to modify.
* Apply default route a different way - macOS
The original way we applied default route, by forking
0.0.0.0/0 into 0/1 and 128/1 works, but if mac os has any networking
hiccups -if you change SSIDs or sleep/wake- macos erases the system default route.
And then all networking on the computer is broken.
to summarize the new way:
allowDefault=1
```
sudo route delete default 192.168.82.1
sudo route add default 10.2.0.2
sudo route add -ifscope en1 default 192.168.82.1
```
gives us this routing table
```
Destination Gateway RT_IFA Flags Refs Use Mtu Netif Expire rtt(ms) rttvar(ms)
default 10.2.0.2 10.2.0.18 UGScg 90 1 2800 feth4823
default 192.168.82.1 192.168.82.217 UGScIg
```
allowDefault=0
```
sudo route delete default
sudo route delete -ifscope en1 default
sudo route add default 192.168.82.1
```
Notice the I flag, for -ifscope, on the physical default route.
route change does not seem to work reliably.
* fix docker tag for controllers (#2066)
* Update build.sh (#2068)
fix mkwork compilation errors
* Fix network DNS on macOS
It stopped working for ipv4 only networks in Monterey.
See #1696
We add some config like so to System Configuration
```
scutil
show State:/Network/Service/9bee8941b5xxxxxx/IPv4
<dictionary> {
Addresses : <array> {
0 : 10.2.1.36
}
InterfaceName : feth4823
Router : 10.2.1.36
ServerAddress : 127.0.0.1
}
```
* Add search domain to macos dns configuration
Stumbled upon this while debugging something else.
If we add search domain to our system configuration for
network DNS, then search domains work:
```
ping server1 ~
PING server1.my.domain (10.123.3.1): 56 data bytes
64 bytes from 10.123.3.1
```
* Fix reporting of secondaryPort and tertiaryPort See: #2039
* Fix typos (#2075)
* Disable executable stacks on assembly objects (#2071)
Add `--noexecstack` to the assembler flags so the resulting binary
will link with a non-executable stack.
Fixeszerotier/ZeroTierOne#1179
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
* Test that starting zerotier before internet works
* Don't skip hellos when there are no paths available
working on #2082
* Update validate-1m-linux.sh
* Save zt node log files on abort
* Separate test and summary step in validator script
* Don't apply default route until zerotier is "online"
I was running into issues with restarting the zerotier service while
"full tunnel" mode is enabled.
When zerotier first boots, it gets network state from the cache
on disk. So it immediately applies all the routes it knew about
before it shutdown.
The network config may have change in this time.
If it has, then your default route is via a route
you are blocked from talking on. So you can't get the current
network config, so your internet does not work.
Other options include
- don't use cached network state on boot
- find a better criteria than "online"
* Fix node time-to-online counter in validator script
* Export variables so that they are accessible by exit function
* Fix PortMapper issue on ZeroTier startup
See issue #2082
We use a call to libnatpmp::ininatpp to make sure the computer
has working network sockets before we go into the main
nat-pmp/upnp logic.
With basic exponenetial delay up to 30 seconds.
* testing
* Comment out PortMapper debug
this got left turned on in a confusing merge previously
* fix macos default route again
see commit fb6af1971 * Fix network DNS on macOS
adding that stuff to System Config causes this extra route to be added
which breaks ipv4 default route.
We figured out a weird System Coniguration setting
that works.
--- old
couldn't figure out how to fix it in SystemConfiguration
so here we are# Please enter the commit message for your changes. Lines starting
We also moved the dns setter to before the syncIps stuff
to help with a race condition. It didn't always work when
you re-joined a network with default route enabled.
* Catch all conditions in switch statement, remove trailing whitespaces
* Add setmtu command, fix bond lifetime issue
* Basic cleanups
* Check if null is passed to VirtualNetworkConfig.equals and name fixes
* ANDROID-96: Simplify and use return code from node_init directly
* Windows arm64 (#2099)
* ARM64 changes for 1.12
* 1.12 Windows advanced installer updates and updates for ARM64
* 1.12.0
* Linux build fixes for old distros.
* release notes
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
Co-authored-by: Jake Vis <jakevis@outlook.com>
Co-authored-by: Jörg Thalheim <joerg@thalheim.io>
Co-authored-by: lison <imlison@foxmail.com>
Co-authored-by: Kenny MacDermid <kenny@macdermid.ca>
* Fix primary port binding issue in 1.12 (#2107)
* Add test for primary port bindings to validator - See #2105
* Add delay to binding test
* Remove TCP binding logic from Binder to fix#2105
* add second control plane socket for ipv6
* fix controller network post endpoint
* exit if we can't bind at least one of IPV4 or IPV6 for control plane port
---------
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
* Version bump, Linux version stuff, Debian dependencies from 1.12.0 rebuild, release notes.
* macOS version bump in installer
* Windows version bump.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
Co-authored-by: Jake Vis <jakevis@outlook.com>
Co-authored-by: Jörg Thalheim <joerg@thalheim.io>
Co-authored-by: lison <imlison@foxmail.com>
Co-authored-by: Kenny MacDermid <kenny@macdermid.ca>
* Fix primary port binding issue in 1.12 (#2107)
* Add test for primary port bindings to validator - See #2105
* Add delay to binding test
* Remove TCP binding logic from Binder to fix#2105
* add second control plane socket for ipv6
* fix controller network post endpoint
* exit if we can't bind at least one of IPV4 or IPV6 for control plane port
---------
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
* Version bump, Linux version stuff, Debian dependencies from 1.12.0 rebuild, release notes.
* macOS version bump in installer
* Windows version bump.
---------
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
* Add test for primary port bindings to validator - See #2105
* Add delay to binding test
* Remove TCP binding logic from Binder to fix#2105
* add second control plane socket for ipv6
* fix controller network post endpoint
* exit if we can't bind at least one of IPV4 or IPV6 for control plane port
---------
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
* add note about forceTcpRelay
* Create a sample systemd unit for tcp proxy
* set gitattributes for rust & cargo so hashes dont conflict on Windows
* Revert "set gitattributes for rust & cargo so hashes dont conflict on Windows"
This reverts commit 032dc5c108.
* Turn off autocrlf for rust source
Doesn't appear to play nice well when it comes to git and vendored cargo package hashes
* Fix#1883 (#1886)
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
* Don't vendor packages for zeroidc (#1885)
* Added docker environment way to join networks (#1871)
* add StringUtils
* fix headers
use recommended headers and remove unused headers
* move extern "C"
only JNI functions need to be exported
* cleanup
* fix ANDROID-50: RESULT_ERROR_BAD_PARAMETER typo
* fix typo in log message
* fix typos in JNI method signatures
* fix typo
* fix ANDROID-51: fieldName is uninitialized
* fix ANDROID-35: memory leak
* fix missing DeleteLocalRef in loops
* update to use unique error codes
* add GETENV macro
* add LOG_TAG defines
* ANDROID-48: add ZT_jnicache.cpp
* ANDROID-48: use ZT_jnicache.cpp and remove ZT_jnilookup.cpp and ZT_jniarray.cpp
* add Event.fromInt
* add PeerRole.fromInt
* add ResultCode.fromInt
* fix ANDROID-36: issues with ResultCode
* add VirtualNetworkConfigOperation.fromInt
* fix ANDROID-40: VirtualNetworkConfigOperation out-of-sync with ZT_VirtualNetworkConfigOperation enum
* add VirtualNetworkStatus.fromInt
* fix ANDROID-37: VirtualNetworkStatus out-of-sync with ZT_VirtualNetworkStatus enum
* add VirtualNetworkType.fromInt
* make NodeStatus a plain data class
* fix ANDROID-52: synchronization bug with nodeMap
* Node init work: separate Node construction and init
* add Node.toString
* make PeerPhysicalPath a plain data class
* remove unused PeerPhysicalPath.fixed
* add array functions
* make Peer a plain data class
* make Version a plain data class
* fix ANDROID-42: copy/paste error
* fix ANDROID-49: VirtualNetworkConfig.equals is wrong
* reimplement VirtualNetworkConfig.equals
* reimplement VirtualNetworkConfig.compareTo
* add VirtualNetworkConfig.hashCode
* make VirtualNetworkConfig a plain data class
* remove unused VirtualNetworkConfig.enabled
* reimplement VirtualNetworkDNS.equals
* add VirtualNetworkDNS.hashCode
* make VirtualNetworkDNS a plain data class
* reimplement VirtualNetworkRoute.equals
* reimplement VirtualNetworkRoute.compareTo
* reimplement VirtualNetworkRoute.toString
* add VirtualNetworkRoute.hashCode
* make VirtualNetworkRoute a plain data class
* add isSocketAddressEmpty
* add addressPort
* add fromSocketAddressObject
* invert logic in a couple of places and return early
* newInetAddress and newInetSocketAddress work
allow newInetSocketAddress to return NULL if given empty address
* fix ANDROID-38: stack corruption in onSendPacketRequested
* use GETENV macro
* JniRef work
JniRef does not use callbacks struct, so remove
fix NewGlobalRef / DeleteGlobalRef mismatch
* use PRId64 macros
* switch statement work
* comments and logging
* Modifier 'public' is redundant for interface members
* NodeException can be made a checked Exception
* 'NodeException' does not define a 'serialVersionUID' field
* 'finalize()' should not be overridden
this is fine to do because ZeroTierOneService calls close() when it is done
* error handling, error reporting, asserts, logging
* simplify loadLibrary
* rename Node.networks -> Node.networkConfigs
* Windows file permissions fix (#1887)
* Allow macOS interfaces to use multiple IP addresses (#1879)
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Fix condition where full HELLOs might not be sent when necessary (#1877)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* 1.10.4 version bumps
* Add security policy to repo (#1889)
* [+] add e2k64 arch (#1890)
* temp fix for ANDROID-56: crash inside newNetworkConfig from too many args
* 1.10.4 release notes
* Windows 1.10.4 Advanced Installer bump
* Revert "temp fix for ANDROID-56: crash inside newNetworkConfig from too many args"
This reverts commit dd627cd7f4.
* actual fix for ANDROID-56: crash inside newNetworkConfig
cast all arguments to varargs functions as good style
* Fix addIp being called with applied ips (#1897)
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
* 1.10.5 (#1905)
* 1.10.5 bump
* 1.10.5 for Windows
* 1.10.5
* Prevent path-learning loops (#1914)
* Prevent path-learning loops
* Only allow new overwrite if not bonded
* fix binding temporary ipv6 addresses on macos (#1910)
The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
* 1.10.6 (#1929)
* 1.10.5 bump
* 1.10.6
* 1.10.6 AIP for Windows.
* Release notes for 1.10.6 (#1931)
* Minor tweak to Synology Docker image script (#1936)
* Change if_def again so ios can build (#1937)
All apple's variables are "defined"
but sometimes they are defined as "0"
* move begin/commit into try/catch block (#1932)
Thread was exiting in some cases
* Bump openssl from 0.10.45 to 0.10.48 in /zeroidc (#1938)
Bumps [openssl](https://github.com/sfackler/rust-openssl) from 0.10.45 to 0.10.48.
- [Release notes](https://github.com/sfackler/rust-openssl/releases)
- [Commits](https://github.com/sfackler/rust-openssl/compare/openssl-v0.10.45...openssl-v0.10.48)
---
updated-dependencies:
- dependency-name: openssl
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* new drone bits
* Fix multiple network join from environment entrypoint.sh.release (#1961)
* _bond_m guards _bond, not _paths_m (#1965)
* Fix: warning: mutex '_aqm_m' is not held on every path through here [-Wthread-safety-analysis] (#1964)
* Bump h2 from 0.3.16 to 0.3.17 in /zeroidc (#1963)
Bumps [h2](https://github.com/hyperium/h2) from 0.3.16 to 0.3.17.
- [Release notes](https://github.com/hyperium/h2/releases)
- [Changelog](https://github.com/hyperium/h2/blob/master/CHANGELOG.md)
- [Commits](https://github.com/hyperium/h2/compare/v0.3.16...v0.3.17)
---
updated-dependencies:
- dependency-name: h2
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Add note that binutils is required on FreeBSD (#1968)
* Add prometheus metrics for Central controllers (#1969)
* add header-only prometheus lib to ext
* rename folder
* Undo rename directory
* prometheus simpleapi included on mac & linux
* wip
* wire up some controller stats
* Get windows building with prometheus
* bsd build flags for prometheus
* Fix multiple network join from environment entrypoint.sh.release (#1961)
* _bond_m guards _bond, not _paths_m (#1965)
* Fix: warning: mutex '_aqm_m' is not held on every path through here [-Wthread-safety-analysis] (#1964)
* Serve prom metrics from /metrics endpoint
* Add prom metrics for Central controller specific things
* reorganize metric initialization
* testing out a labled gauge on Networks
* increment error counter on throw
* Consolidate metrics definitions
Put all metric definitions into node/Metrics.hpp. Accessed as needed
from there.
* Revert "testing out a labled gauge on Networks"
This reverts commit 499ed6d95e.
* still blows up but adding to the record for completeness right now
* Fix runtime issues with metrics
* Add metrics files to visual studio project
* Missed an "extern"
* add copyright headers to new files
* Add metrics for sent/received bytes (total)
* put /metrics endpoint behind auth
* sendto returns int on Win32
---------
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
* Central startup update (#1973)
* allow specifying authtoken in central startup
* set allowManagedFrom
* move redis_mem_notification to the correct place
* add node checkins metric
* wire up min/max connection pool size metrics
* x86_64-unknown-linux-gnu on ubuntu runner (#1975)
* adding incoming zt packet type metrics (#1976)
* use cpp-httplib for HTTP control plane (#1979)
refactored the old control plane code to use [cpp-httplib](https://github.com/yhirose/cpp-httplib) instead of a hand rolled HTTP server. Makes the control plane code much more legible. Also no longer randomly stops responding.
* Outgoing Packet Metrics (#1980)
add tx/rx labels to packet counters and add metrics for outgoing packets
* Add short-term validation test workflow (#1974)
Add short-term validation test workflow
* Brenton/curly braces (#1971)
* fix formatting
* properly adjust various lines
breakup multiple statements onto multiple lines
* insert {} around if, for, etc.
* Fix rust dependency caching (#1983)
* fun with rust caching
* kick
* comment out invalid yaml keys for now
* Caching should now work
* re-add/rename key directives
* bump
* bump
* bump
* Don't force rebuild on Windows build GH Action (#1985)
Switching `/t:ZeroTierOne:Rebuild` to just `/t:ZeroTierOne` allows the Windows build to use the rust cache. `/t:ZeroTierOne:Rebuild` cleared the cache before building.
* More packet metrics (#1982)
* found path negotation sends that weren't accounted for
* Fix histogram so it will actually compile
* Found more places for packet metrics
* separate the bind & listen calls on the http backplane (#1988)
* fix memory leak (#1992)
* fix a couple of metrics (#1989)
* More aggressive CLI spamming (#1993)
* fix type signatures (#1991)
* Network-metrics (#1994)
* Add a couple quick functions for converting a uint64_t network ID/node ID into std::string
* Network metrics
* Peer metrics (#1995)
* Adding peer metrics
still need to be wired up for use
* per peer packet metrics
* Fix crash from bad instantiation of histogram
* separate alive & dead path counts
* Add peer metric update block
* add peer latency values in doPingAndKeepalive
* prevent deadlock
* peer latency histogram actually works now
* cleanup
* capture counts of packets to specific peers
---------
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
* Metrics consolidation (#1997)
* Rename zt_packet_incoming -> zt_packet
Also consolidate zt_peer_packets into a single metric with tx and rx labels. Same for ztc_tcp_data and ztc_udp_data
* Further collapse tcp & udp into metric labels for zt_data
* Fix zt_data metric description
* zt_peer_packets description fix
* Consolidate incoming/outgoing network packets to a single metric
* zt_incoming_packet_error -> zt_packet_error
* Disable peer metrics for central controllers
Can change in the future if needed, but given the traffic our controllers serve, that's going to be a *lot* of data
* Disable peer metrics for controllers pt 2
* Update readme files for metrics (#2000)
* Controller Metrics & Network Config Request Fix (#2003)
* add new metrics for network config request queue size and sso expirations
* move sso expiration to its own thread in the controller
* fix potential undefined behavior when modifying a set
* Enable RTTI in Windows build
The new prometheus histogram stuff needs it.
Access violation - no RTTI data!INVALID packet 636ebd9ee8cac6c0 from cafe9efeb9(2605:9880:200:1200:30:571:e34:51/9993) (unexpected exception in tryDecode())
* Don't re-apply routes on BSD
See issue #1986
* Capture setContent by-value instead of by-reference (#2006)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* fix typos (#2010)
* central controller metrics & request path updates (#2012)
* internal db metrics
* use shared mutexes for read/write locks
* remove this lock. only used for a metric
* more metrics
* remove exploratory metrics
place controller request benchmarks behind ifdef
* Improve validation test (#2013)
* fix init order for EmbeddedNetworkController (#2014)
* add constant for getifaddrs cache time
* cache getifaddrs - mac
* cache getifaddrs - linux
* cache getifaddrs - bsd
* cache getifaddrs - windows
* Fix oidc client lookup query
join condition referenced the wrong table. Worked fine unless there were multiple identical client IDs
* Fix udp sent metric
was only incrementing by 1 for each packet sent
* Allow sending all surface addresses to peer in low-bandwidth mode
* allow enabling of low bandwidth mode on controllers
* don't unborrow bad connections
pool will clean them up later
* Multi-arch controller container (#2037)
create arm64 & amd64 images for central controller
* Update README.md
issue #2009
* docker tags change
* fix oidc auth url memory leak (#2031)
getAuthURL() was not calling zeroidc::free_cstr(url);
the only place authAuthURL is called, the url can be retrieved
from the network config instead.
You could alternatively copy the string and call free_cstr in getAuthURL.
If that's better we can change the PR.
Since now there are no callers of getAuthURL I deleted it.
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Bump openssl from 0.10.48 to 0.10.55 in /zeroidc (#2034)
Bumps [openssl](https://github.com/sfackler/rust-openssl) from 0.10.48 to 0.10.55.
- [Release notes](https://github.com/sfackler/rust-openssl/releases)
- [Commits](https://github.com/sfackler/rust-openssl/compare/openssl-v0.10.48...openssl-v0.10.55)
---
updated-dependencies:
- dependency-name: openssl
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* zeroidc cargo warnings (#2029)
* fix unused struct member cargo warning
* fix unused import cargo warning
* fix unused return value cargo warning
---------
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* fix memory leak in macos ipv6/dns helper (#2030)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Consider ZEROTIER_JOIN_NETWORKS in healthcheck (#1978)
* Add a 2nd auth token only for access to /metrics (#2043)
* Add a 2nd auth token for /metrics
Allows administrators to distribute a token that only has access to read
metrics and nothing else.
Also added support for using bearer auth tokens for both types of tokens
Separate endpoint for metrics #2041
* Update readme
* fix a couple of cases of writing the wrong token
* Add warning to cli for allow default on FreeBSD
It doesn't work.
Not possible to fix with deficient network
stack and APIs.
ZeroTierOne-freebsd # zerotier-cli set 9bee8941b5xxxxxx allowDefault=1
400 set Allow Default does not work properly on FreeBSD. See #580
root@freebsd13-a:~/ZeroTierOne-freebsd # zerotier-cli get 9bee8941b5xxxxxx allowDefault
1
* ARM64 Support for TapDriver6 (#1949)
* Release memory previously allocated by UPNP_GetValidIGD
* Fix ifdef that breaks libzt on iOS (#2050)
* less drone (#2060)
* Exit if loading an invalid identity from disk (#2058)
* Exit if loading an invalid identity from disk
Previously, if an invalid identity was loaded from disk, ZeroTier would
generate a new identity & chug along and generate a brand new identity
as if nothing happened. When running in containers, this introduces the
possibility for key matter loss; especially when running in containers
where the identity files are mounted in the container read only. In
this case, ZT will continue chugging along with a brand new identity
with no possibility of recovering the private key.
ZeroTier should exit upon loading of invalid identity.public/identity.secret #2056
* add validation test for #2056
* tcp-proxy: fix build
* Adjust tcp-proxy makefile to support metrics
There's no way to get the metrics yet. Someone will
have to add the http service.
* remove ZT_NO_METRIC ifdef
* Implement recvmmsg() for Linux to reduce syscalls. (#2046)
Between 5% and 40% speed improvement on Linux, depending on system configuration and load.
* suppress warnings: comparison of integers of different signs: 'int64_t' (aka 'long') and 'uint64_t' (aka 'unsigned long') [-Wsign-compare] (#2063)
* fix warning: 'OS_STRING' macro redefined [-Wmacro-redefined] (#2064)
Even though this is in ext, these particular chunks of code were added
by us, so are ok to modify.
* Apply default route a different way - macOS
The original way we applied default route, by forking
0.0.0.0/0 into 0/1 and 128/1 works, but if mac os has any networking
hiccups -if you change SSIDs or sleep/wake- macos erases the system default route.
And then all networking on the computer is broken.
to summarize the new way:
allowDefault=1
```
sudo route delete default 192.168.82.1
sudo route add default 10.2.0.2
sudo route add -ifscope en1 default 192.168.82.1
```
gives us this routing table
```
Destination Gateway RT_IFA Flags Refs Use Mtu Netif Expire rtt(ms) rttvar(ms)
default 10.2.0.2 10.2.0.18 UGScg 90 1 2800 feth4823
default 192.168.82.1 192.168.82.217 UGScIg
```
allowDefault=0
```
sudo route delete default
sudo route delete -ifscope en1 default
sudo route add default 192.168.82.1
```
Notice the I flag, for -ifscope, on the physical default route.
route change does not seem to work reliably.
* fix docker tag for controllers (#2066)
* Update build.sh (#2068)
fix mkwork compilation errors
* Fix network DNS on macOS
It stopped working for ipv4 only networks in Monterey.
See #1696
We add some config like so to System Configuration
```
scutil
show State:/Network/Service/9bee8941b5xxxxxx/IPv4
<dictionary> {
Addresses : <array> {
0 : 10.2.1.36
}
InterfaceName : feth4823
Router : 10.2.1.36
ServerAddress : 127.0.0.1
}
```
* Add search domain to macos dns configuration
Stumbled upon this while debugging something else.
If we add search domain to our system configuration for
network DNS, then search domains work:
```
ping server1 ~
PING server1.my.domain (10.123.3.1): 56 data bytes
64 bytes from 10.123.3.1
```
* Fix reporting of secondaryPort and tertiaryPort See: #2039
* Fix typos (#2075)
* Disable executable stacks on assembly objects (#2071)
Add `--noexecstack` to the assembler flags so the resulting binary
will link with a non-executable stack.
Fixeszerotier/ZeroTierOne#1179
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
* Test that starting zerotier before internet works
* Don't skip hellos when there are no paths available
working on #2082
* Update validate-1m-linux.sh
* Save zt node log files on abort
* Separate test and summary step in validator script
* Don't apply default route until zerotier is "online"
I was running into issues with restarting the zerotier service while
"full tunnel" mode is enabled.
When zerotier first boots, it gets network state from the cache
on disk. So it immediately applies all the routes it knew about
before it shutdown.
The network config may have change in this time.
If it has, then your default route is via a route
you are blocked from talking on. So you can't get the current
network config, so your internet does not work.
Other options include
- don't use cached network state on boot
- find a better criteria than "online"
* Fix node time-to-online counter in validator script
* Export variables so that they are accessible by exit function
* Fix PortMapper issue on ZeroTier startup
See issue #2082
We use a call to libnatpmp::ininatpp to make sure the computer
has working network sockets before we go into the main
nat-pmp/upnp logic.
With basic exponenetial delay up to 30 seconds.
* testing
* Comment out PortMapper debug
this got left turned on in a confusing merge previously
* fix macos default route again
see commit fb6af1971 * Fix network DNS on macOS
adding that stuff to System Config causes this extra route to be added
which breaks ipv4 default route.
We figured out a weird System Coniguration setting
that works.
--- old
couldn't figure out how to fix it in SystemConfiguration
so here we are# Please enter the commit message for your changes. Lines starting
We also moved the dns setter to before the syncIps stuff
to help with a race condition. It didn't always work when
you re-joined a network with default route enabled.
* Catch all conditions in switch statement, remove trailing whitespaces
* Add setmtu command, fix bond lifetime issue
* Basic cleanups
* Check if null is passed to VirtualNetworkConfig.equals and name fixes
* ANDROID-96: Simplify and use return code from node_init directly
* Windows arm64 (#2099)
* ARM64 changes for 1.12
* 1.12 Windows advanced installer updates and updates for ARM64
* 1.12.0
* Linux build fixes for old distros.
* release notes
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
Co-authored-by: Jake Vis <jakevis@outlook.com>
Co-authored-by: Jörg Thalheim <joerg@thalheim.io>
Co-authored-by: lison <imlison@foxmail.com>
Co-authored-by: Kenny MacDermid <kenny@macdermid.ca>
see commit fb6af1971 * Fix network DNS on macOS
adding that stuff to System Config causes this extra route to be added
which breaks ipv4 default route.
We figured out a weird System Coniguration setting
that works.
--- old
couldn't figure out how to fix it in SystemConfiguration
so here we are# Please enter the commit message for your changes. Lines starting
We also moved the dns setter to before the syncIps stuff
to help with a race condition. It didn't always work when
you re-joined a network with default route enabled.
See issue #2082
We use a call to libnatpmp::ininatpp to make sure the computer
has working network sockets before we go into the main
nat-pmp/upnp logic.
With basic exponenetial delay up to 30 seconds.
I was running into issues with restarting the zerotier service while
"full tunnel" mode is enabled.
When zerotier first boots, it gets network state from the cache
on disk. So it immediately applies all the routes it knew about
before it shutdown.
The network config may have change in this time.
If it has, then your default route is via a route
you are blocked from talking on. So you can't get the current
network config, so your internet does not work.
Other options include
- don't use cached network state on boot
- find a better criteria than "online"
Stumbled upon this while debugging something else.
If we add search domain to our system configuration for
network DNS, then search domains work:
```
ping server1 ~
PING server1.my.domain (10.123.3.1): 56 data bytes
64 bytes from 10.123.3.1
```
It stopped working for ipv4 only networks in Monterey.
See #1696
We add some config like so to System Configuration
```
scutil
show State:/Network/Service/9bee8941b5xxxxxx/IPv4
<dictionary> {
Addresses : <array> {
0 : 10.2.1.36
}
InterfaceName : feth4823
Router : 10.2.1.36
ServerAddress : 127.0.0.1
}
```
The original way we applied default route, by forking
0.0.0.0/0 into 0/1 and 128/1 works, but if mac os has any networking
hiccups -if you change SSIDs or sleep/wake- macos erases the system default route.
And then all networking on the computer is broken.
to summarize the new way:
allowDefault=1
```
sudo route delete default 192.168.82.1
sudo route add default 10.2.0.2
sudo route add -ifscope en1 default 192.168.82.1
```
gives us this routing table
```
Destination Gateway RT_IFA Flags Refs Use Mtu Netif Expire rtt(ms) rttvar(ms)
default 10.2.0.2 10.2.0.18 UGScg 90 1 2800 feth4823
default 192.168.82.1 192.168.82.217 UGScIg
```
allowDefault=0
```
sudo route delete default
sudo route delete -ifscope en1 default
sudo route add default 192.168.82.1
```
Notice the I flag, for -ifscope, on the physical default route.
route change does not seem to work reliably.
* Exit if loading an invalid identity from disk
Previously, if an invalid identity was loaded from disk, ZeroTier would
generate a new identity & chug along and generate a brand new identity
as if nothing happened. When running in containers, this introduces the
possibility for key matter loss; especially when running in containers
where the identity files are mounted in the container read only. In
this case, ZT will continue chugging along with a brand new identity
with no possibility of recovering the private key.
ZeroTier should exit upon loading of invalid identity.public/identity.secret #2056
* add validation test for #2056
It doesn't work.
Not possible to fix with deficient network
stack and APIs.
ZeroTierOne-freebsd # zerotier-cli set 9bee8941b5xxxxxx allowDefault=1
400 set Allow Default does not work properly on FreeBSD. See #580
root@freebsd13-a:~/ZeroTierOne-freebsd # zerotier-cli get 9bee8941b5xxxxxx allowDefault
1
* Add a 2nd auth token for /metrics
Allows administrators to distribute a token that only has access to read
metrics and nothing else.
Also added support for using bearer auth tokens for both types of tokens
Separate endpoint for metrics #2041
* Update readme
* fix a couple of cases of writing the wrong token
getAuthURL() was not calling zeroidc::free_cstr(url);
the only place authAuthURL is called, the url can be retrieved
from the network config instead.
You could alternatively copy the string and call free_cstr in getAuthURL.
If that's better we can change the PR.
Since now there are no callers of getAuthURL I deleted it.
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* internal db metrics
* use shared mutexes for read/write locks
* remove this lock. only used for a metric
* more metrics
* remove exploratory metrics
place controller request benchmarks behind ifdef
The new prometheus histogram stuff needs it.
Access violation - no RTTI data!INVALID packet 636ebd9ee8cac6c0 from cafe9efeb9(2605:9880:200:1200:30:571:e34:51/9993) (unexpected exception in tryDecode())
* add new metrics for network config request queue size and sso expirations
* move sso expiration to its own thread in the controller
* fix potential undefined behavior when modifying a set
* Rename zt_packet_incoming -> zt_packet
Also consolidate zt_peer_packets into a single metric with tx and rx labels. Same for ztc_tcp_data and ztc_udp_data
* Further collapse tcp & udp into metric labels for zt_data
* Fix zt_data metric description
* zt_peer_packets description fix
* Consolidate incoming/outgoing network packets to a single metric
* zt_incoming_packet_error -> zt_packet_error
* Disable peer metrics for central controllers
Can change in the future if needed, but given the traffic our controllers serve, that's going to be a *lot* of data
* Disable peer metrics for controllers pt 2
* Adding peer metrics
still need to be wired up for use
* per peer packet metrics
* Fix crash from bad instantiation of histogram
* separate alive & dead path counts
* Add peer metric update block
* add peer latency values in doPingAndKeepalive
* prevent deadlock
* peer latency histogram actually works now
* cleanup
* capture counts of packets to specific peers
---------
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
Switching `/t:ZeroTierOne:Rebuild` to just `/t:ZeroTierOne` allows the Windows build to use the rust cache. `/t:ZeroTierOne:Rebuild` cleared the cache before building.
refactored the old control plane code to use [cpp-httplib](https://github.com/yhirose/cpp-httplib) instead of a hand rolled HTTP server. Makes the control plane code much more legible. Also no longer randomly stops responding.
* allow specifying authtoken in central startup
* set allowManagedFrom
* move redis_mem_notification to the correct place
* add node checkins metric
* wire up min/max connection pool size metrics
* add header-only prometheus lib to ext
* rename folder
* Undo rename directory
* prometheus simpleapi included on mac & linux
* wip
* wire up some controller stats
* Get windows building with prometheus
* bsd build flags for prometheus
* Fix multiple network join from environment entrypoint.sh.release (#1961)
* _bond_m guards _bond, not _paths_m (#1965)
* Fix: warning: mutex '_aqm_m' is not held on every path through here [-Wthread-safety-analysis] (#1964)
* Serve prom metrics from /metrics endpoint
* Add prom metrics for Central controller specific things
* reorganize metric initialization
* testing out a labled gauge on Networks
* increment error counter on throw
* Consolidate metrics definitions
Put all metric definitions into node/Metrics.hpp. Accessed as needed
from there.
* Revert "testing out a labled gauge on Networks"
This reverts commit 499ed6d95e.
* still blows up but adding to the record for completeness right now
* Fix runtime issues with metrics
* Add metrics files to visual studio project
* Missed an "extern"
* add copyright headers to new files
* Add metrics for sent/received bytes (total)
* put /metrics endpoint behind auth
* sendto returns int on Win32
---------
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
* add note about forceTcpRelay
* Create a sample systemd unit for tcp proxy
* set gitattributes for rust & cargo so hashes dont conflict on Windows
* Revert "set gitattributes for rust & cargo so hashes dont conflict on Windows"
This reverts commit 032dc5c108.
* Turn off autocrlf for rust source
Doesn't appear to play nice well when it comes to git and vendored cargo package hashes
* Fix#1883 (#1886)
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
* Don't vendor packages for zeroidc (#1885)
* Added docker environment way to join networks (#1871)
* add StringUtils
* fix headers
use recommended headers and remove unused headers
* move extern "C"
only JNI functions need to be exported
* cleanup
* fix ANDROID-50: RESULT_ERROR_BAD_PARAMETER typo
* fix typo in log message
* fix typos in JNI method signatures
* fix typo
* fix ANDROID-51: fieldName is uninitialized
* fix ANDROID-35: memory leak
* fix missing DeleteLocalRef in loops
* update to use unique error codes
* add GETENV macro
* add LOG_TAG defines
* ANDROID-48: add ZT_jnicache.cpp
* ANDROID-48: use ZT_jnicache.cpp and remove ZT_jnilookup.cpp and ZT_jniarray.cpp
* add Event.fromInt
* add PeerRole.fromInt
* add ResultCode.fromInt
* fix ANDROID-36: issues with ResultCode
* add VirtualNetworkConfigOperation.fromInt
* fix ANDROID-40: VirtualNetworkConfigOperation out-of-sync with ZT_VirtualNetworkConfigOperation enum
* add VirtualNetworkStatus.fromInt
* fix ANDROID-37: VirtualNetworkStatus out-of-sync with ZT_VirtualNetworkStatus enum
* add VirtualNetworkType.fromInt
* make NodeStatus a plain data class
* fix ANDROID-52: synchronization bug with nodeMap
* Node init work: separate Node construction and init
* add Node.toString
* make PeerPhysicalPath a plain data class
* remove unused PeerPhysicalPath.fixed
* add array functions
* make Peer a plain data class
* make Version a plain data class
* fix ANDROID-42: copy/paste error
* fix ANDROID-49: VirtualNetworkConfig.equals is wrong
* reimplement VirtualNetworkConfig.equals
* reimplement VirtualNetworkConfig.compareTo
* add VirtualNetworkConfig.hashCode
* make VirtualNetworkConfig a plain data class
* remove unused VirtualNetworkConfig.enabled
* reimplement VirtualNetworkDNS.equals
* add VirtualNetworkDNS.hashCode
* make VirtualNetworkDNS a plain data class
* reimplement VirtualNetworkRoute.equals
* reimplement VirtualNetworkRoute.compareTo
* reimplement VirtualNetworkRoute.toString
* add VirtualNetworkRoute.hashCode
* make VirtualNetworkRoute a plain data class
* add isSocketAddressEmpty
* add addressPort
* add fromSocketAddressObject
* invert logic in a couple of places and return early
* newInetAddress and newInetSocketAddress work
allow newInetSocketAddress to return NULL if given empty address
* fix ANDROID-38: stack corruption in onSendPacketRequested
* use GETENV macro
* JniRef work
JniRef does not use callbacks struct, so remove
fix NewGlobalRef / DeleteGlobalRef mismatch
* use PRId64 macros
* switch statement work
* comments and logging
* Modifier 'public' is redundant for interface members
* NodeException can be made a checked Exception
* 'NodeException' does not define a 'serialVersionUID' field
* 'finalize()' should not be overridden
this is fine to do because ZeroTierOneService calls close() when it is done
* error handling, error reporting, asserts, logging
* simplify loadLibrary
* rename Node.networks -> Node.networkConfigs
* Windows file permissions fix (#1887)
* Allow macOS interfaces to use multiple IP addresses (#1879)
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Fix condition where full HELLOs might not be sent when necessary (#1877)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* 1.10.4 version bumps
* Add security policy to repo (#1889)
* [+] add e2k64 arch (#1890)
* temp fix for ANDROID-56: crash inside newNetworkConfig from too many args
* 1.10.4 release notes
* Windows 1.10.4 Advanced Installer bump
* Revert "temp fix for ANDROID-56: crash inside newNetworkConfig from too many args"
This reverts commit dd627cd7f4.
* actual fix for ANDROID-56: crash inside newNetworkConfig
cast all arguments to varargs functions as good style
* Fix addIp being called with applied ips (#1897)
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
* 1.10.5 (#1905)
* 1.10.5 bump
* 1.10.5 for Windows
* 1.10.5
* Prevent path-learning loops (#1914)
* Prevent path-learning loops
* Only allow new overwrite if not bonded
* fix binding temporary ipv6 addresses on macos (#1910)
The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
* 1.10.6 (#1929)
* 1.10.5 bump
* 1.10.6
* 1.10.6 AIP for Windows.
---------
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
* add note about forceTcpRelay
* Create a sample systemd unit for tcp proxy
* set gitattributes for rust & cargo so hashes dont conflict on Windows
* Revert "set gitattributes for rust & cargo so hashes dont conflict on Windows"
This reverts commit 032dc5c108.
* Turn off autocrlf for rust source
Doesn't appear to play nice well when it comes to git and vendored cargo package hashes
* Fix#1883 (#1886)
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
* Don't vendor packages for zeroidc (#1885)
* Added docker environment way to join networks (#1871)
* add StringUtils
* fix headers
use recommended headers and remove unused headers
* move extern "C"
only JNI functions need to be exported
* cleanup
* fix ANDROID-50: RESULT_ERROR_BAD_PARAMETER typo
* fix typo in log message
* fix typos in JNI method signatures
* fix typo
* fix ANDROID-51: fieldName is uninitialized
* fix ANDROID-35: memory leak
* fix missing DeleteLocalRef in loops
* update to use unique error codes
* add GETENV macro
* add LOG_TAG defines
* ANDROID-48: add ZT_jnicache.cpp
* ANDROID-48: use ZT_jnicache.cpp and remove ZT_jnilookup.cpp and ZT_jniarray.cpp
* add Event.fromInt
* add PeerRole.fromInt
* add ResultCode.fromInt
* fix ANDROID-36: issues with ResultCode
* add VirtualNetworkConfigOperation.fromInt
* fix ANDROID-40: VirtualNetworkConfigOperation out-of-sync with ZT_VirtualNetworkConfigOperation enum
* add VirtualNetworkStatus.fromInt
* fix ANDROID-37: VirtualNetworkStatus out-of-sync with ZT_VirtualNetworkStatus enum
* add VirtualNetworkType.fromInt
* make NodeStatus a plain data class
* fix ANDROID-52: synchronization bug with nodeMap
* Node init work: separate Node construction and init
* add Node.toString
* make PeerPhysicalPath a plain data class
* remove unused PeerPhysicalPath.fixed
* add array functions
* make Peer a plain data class
* make Version a plain data class
* fix ANDROID-42: copy/paste error
* fix ANDROID-49: VirtualNetworkConfig.equals is wrong
* reimplement VirtualNetworkConfig.equals
* reimplement VirtualNetworkConfig.compareTo
* add VirtualNetworkConfig.hashCode
* make VirtualNetworkConfig a plain data class
* remove unused VirtualNetworkConfig.enabled
* reimplement VirtualNetworkDNS.equals
* add VirtualNetworkDNS.hashCode
* make VirtualNetworkDNS a plain data class
* reimplement VirtualNetworkRoute.equals
* reimplement VirtualNetworkRoute.compareTo
* reimplement VirtualNetworkRoute.toString
* add VirtualNetworkRoute.hashCode
* make VirtualNetworkRoute a plain data class
* add isSocketAddressEmpty
* add addressPort
* add fromSocketAddressObject
* invert logic in a couple of places and return early
* newInetAddress and newInetSocketAddress work
allow newInetSocketAddress to return NULL if given empty address
* fix ANDROID-38: stack corruption in onSendPacketRequested
* use GETENV macro
* JniRef work
JniRef does not use callbacks struct, so remove
fix NewGlobalRef / DeleteGlobalRef mismatch
* use PRId64 macros
* switch statement work
* comments and logging
* Modifier 'public' is redundant for interface members
* NodeException can be made a checked Exception
* 'NodeException' does not define a 'serialVersionUID' field
* 'finalize()' should not be overridden
this is fine to do because ZeroTierOneService calls close() when it is done
* error handling, error reporting, asserts, logging
* simplify loadLibrary
* rename Node.networks -> Node.networkConfigs
* Windows file permissions fix (#1887)
* Allow macOS interfaces to use multiple IP addresses (#1879)
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Fix condition where full HELLOs might not be sent when necessary (#1877)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* 1.10.4 version bumps
* Add security policy to repo (#1889)
* [+] add e2k64 arch (#1890)
* temp fix for ANDROID-56: crash inside newNetworkConfig from too many args
* 1.10.4 release notes
---------
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
When adding Routes to zerotier's Managed Routes, the helper will
add a route rule to the device that does not have a via ip,
so that the address of the Destination segment cannot be routed
correctly within the container.
Here, based on the contents of the routes key in
`zerotier-cli -j listnetworks`,
by determining whether the via key has an ip address,
if it is not null, helper will no longer add route rules.
ARM Cryptography Extension is optional and not all ARM CPUs support it.
For example, the CPU in Raspberry Pi 4 does not support it.
Check for `__ARM_FEATURE_CRYPTO` before attempting to use the optional
extension.
`__ARM_FEATURE_CRYPTO` is defined by both clang and gcc when the target
has the cryptography extension.
Fixes#1854.
Client side:
* Fix compatibility with OneLogin
* Requested scopes vary by OIDC provider. Different providers have different
Controller side:
*Update Postgres queries to latest Central schema
* Added Central Controller support for the different providers
* Base OIDC provider details are still attached to an org. Client ID & group/email lists are now associated with individual networks.
Xcode warns about "Possible misuse of comma operator here".
Comma is a sequencing operator in C++ and original code does work, but
is highly non-idiomatic.
This patch implements a "TUNNELED" status indicator and "forceTcpRelay" setting for custom relays via local.conf.
For example:
{
"settings":
{
"tcpFallbackRelay": "6.79.53.215/443",
"forceTcpRelay":true
}
}
If you have a VM host like parallels, sometimes you get these link-local
default routes:
```
netstat -nrfinet | grep "default\|\/1"
0/1 10.2.0.12 UGScg feth4823
default 192.168.82.1 UGScg en1
0/1 192.168.82.1 UGScIg en1
default link#22 UCSIg bridge101 !
128.0/1 10.2.0.12 UGSc feth4823
128.0/1 192.168.82.1 UGScI en1
```
(the link#22 one)
The _getRTEs function inclused these routes in the list it makes as like:
device: bridge101, target: 0.0.0.0/0
If it happens to be first in the list, bridge101 gets
selected as the default route.
Then Full Tunnel Mode doesn't work.
The other routes in the list are like:
device: en1 target: 192.168.1.0/24 via: metric: 0 ifscope: 0
device: en1 target: 192.168.1.1/32 via: metric: 0 ifscope: 0
We only need the device name from this, so either one will work.
Through using ndk-build, -Wno-unused-command-line-argument is passed in
somewhere in the pipeline and hides this warning.
The warning can be turned on with:
APP_CPPFLAGS := -Wunused-command-line-argument ...
and then when building, you can see:
C/C++: clang++: warning: argument unused during compilation: '-mfloat-abi=softfp' [-Wunused-command-line-argument]
C/C++: clang++: warning: argument unused during compilation: '-mfpu=neon' [-Wunused-command-line-argument]
C/C++: clang++: warning: argument unused during compilation: '-maes' [-Wunused-command-line-argument]
These are unused because both floating-point and NEON are required in
all standard ARMv8 implementations. [1] [2]
[1] https://developer.arm.com/documentation/den0024/a/AArch64-Floating-point-and-NEON
[2] https://stackoverflow.com/a/29891469
Since NDKr15 (released 2017), unified headers are used by default [1]
Remove -isystem option that was passing bad values to command-line.
The actual value being passed to command-line was:
```
-isystem DK/sysroot/usr/include/RIPLE
```
because of using $NDK and $TRIPLE instead of $(NDK) and $(TRIPLE)
But regardless, $NDK and $TRIPLE were never actually defined values and were just
place-holders mentioned in [1]
[1] https://android.googlesource.com/platform/ndk/+/ndk-release-r16/docs/UnifiedHeaders.md
Surface Addresses are the addresses that
the roots report back to you.
This is helpful for trouble shooting.
If you're behind NAT, the source port is different
than what zerotier is bound to.
If the list of surface address ports is larger than the list of
bound addresses, you are probably behind symmetric NAT.
Anways this can be added to later with a more simple
"easy" or "hard" nat computed message somewhere.
* update entrypoint.sh
- propagate TERM/QUIT/INT signals
- add some basic logging
- check for unbound variables
- update "route helper"
- run as subshell, exit if zerotier-one is unavailable so pod can be restarted
- only call `zerotier-cli` once, avoids race conditions
- only add default routes if allowDefault is enabled for that network
- add some more error handling
- sleep after all networks are processed
* switch to polling ZT service at startup
Co-authored-by: Daniel Quinlan <dq@chaosengine.net>
redis plus plus has an annoying feature where it will open a new
connection for each tx or pipeline by default, rather than just fetching
an existing connection from the pool. Let's change that
Port used for PortMapping was not properly randomized causing multiple clients on the same lan to request the same UPnP port, and not all routers handle this gracefully.
Also fixes issue where the portmapper wasn't started at all if a secondary port wasn't specified, or if the tertiary port was manually specified.
When I first bring up the container, I want to know I'm approving the join request for the right node. I can get the node's ZT address by manually executing `zerotier-cli info` in the node (e.g. with `docker-compose exec zerotier zerotier-cli info`) but just having it in the logs to start with is very convenient.
- Resolve issue with join not being checked properly for success without
using external tools
- Resolve issue where initial boot was not being checked properly
- Now output errors when zerotier fails to start
closes#1581
cc @altano for inspiration for this patch
Signed-off-by: Erik Hollensbe <git@hollensbe.org>
Proactively seek, and distribute external surface addresses
This patch introduces a new "self-awareness" behavior which proactively queries peers for external surface addresses and distributes them via PUSH_DIRECT_PATHS. This has the effect of making ZT more responsive to interface changes.
Current behavior:
Previously, this type of information was only mediated via RENDEZVOUS and was only triggered when the client detected that it no longer had a single alive path to a peer. While PUSH_DIRECT_PATHS would correctly (and often) send local addresses, this was not the case for external addresses collected from response HELLOs. This would lead to situations where only one physical address would be distributed to peers. Additionally, if a new physical interface were to be made available to the client, the client would correctly bind to it but never seek information about its external mapping from a peer, and thus the new physical interface would remain unavailable for other peers to learn about until all paths on the previous interface have expired which can take a couple of minutes. In traditional usage of ZT this is not usually a problem, but it becomes a problem in the following scenarios:
Network interfaces go up and down while ZT is running (e.g. switching to LTE or WiFi from a wired connection)
Network interfaces are added or removed in multipath setups
Proposed behavior:
I propose that normal full HELLOs are sent not only on the first interface in use, but all interfaces. This causes planets to respond with a HELLO containing the surface address for each interface. We then collect each address using SelfAwareness::whoami() and distribute them via the normal PUSH_DIRECT_PATHS mechanism.
Rate gate ECHO per Path instead of per Peer
In multipath scenarios user traffic is used to judge the aliveness of a path. If the user traffic is too infrequent to establish aliveness for a given time window (say 500 ms), the bonding layer will send extra ECHOs at a maximum rate of failoverInterval / 3 (or ~ 166 ms) per path. This patch relaxes the rate-limiting of ECHOs significantly in order to prevent a non-multipath node from dropping ECHOs causing multipath nodes to erroneously judge paths to that node to be dead.
Details
This patch decreases the rate limiting from 1000 ms per peer by a factor of 6 to ~166 ms and rate limits ECHOs per Path instead of per Peer. This allows rate limiting to scale with the number of established paths to a peer.
As a result, if all 64 path slots are used a total of 64 x 6 = 384 ECHOs per second will be allowed in the most aggressive case where failoverInterval is set to 500 ms.
Add a method to "kick" the refresh thread and re-post the tokens in the case where the thread is somehow still running & controller pushes out an AUTH_REQUIRED. This situation happens in a corner case still under investigation where the controller pushes out many copies of the network config repeatedly
See issue #750.
zerotier doesn't currently set a metric on routes. Linux
takes this to mean "0", the highest priority.
Every comment in the issue is about routing between zerotier
and lan and how they conflict.
This quick change could fix this problem for most people.
The subnet route for the zerotier network, the one with no
via, is still 0 in this patch. Just the "via" routes get
higher metrics.
If for some reason, you needed your via routes to have
higher priority, you could use a prefix work-around:
192.168.1.0/25 via 10.147.17.1
192.168.1.128/25 via 10.147.17.1
consolidated everything into the single IDC struct. Should help keep from rotating the pkce token as often & causing issues with the login window flapping
and vice versa.
For issue #1104
With some printf debugging, I was seeing:
here, src fe80::3c7a:2dff:fe0c:21ed, target 10.147.20.0, matchingPrefixBits 0, mostMatchingPrefixBits 0
here, src fd8b:d512:4fd6:255:3c99:932f:2fda:6eff, target 10.147.20.0, matchingPrefixBits 0, mostMatchingPrefixBits 0
and (matchingPrefixBits >= mostMatchingPrefixBits) would be true
Then on mac, somewhere downstream from there, the default route would
get messed up:
default via 92:29:f1:6f:2f:76 dev en0
- Can now provide the following environment variables to populate
secrets (nice for kubernetes, other situations)
- ZEROTIER_API_SECRET: authtoken.secret
- ZEROTIER_IDENTITY_PUBLIC: identity.public
- ZEROTIER_IDENTITY_SECRET: identity.secret
- Joining networks by providing them as a part of docker's "command"
array should now work properly
Signed-off-by: Erik Hollensbe <linux@hollensbe.org>
On certain OSes (Linux & Apple) tun#, tap#, and of course zt# are blacklisted by default, this adds wg# to the list as WireGuard is a similar popular service with wg# being the default adapter name(s) by convention.
Unaligned access caused SIGBUS errors on ARMv6 and ARMv7 targets under FreeBSD.
This was also the cause of the repeating TAP devices. Each time the SIGBUS happened, the service would auto-restart itself, create a new TAP device, and then crash again.
The particular place causing the SIGBUS was:
https://github.com/zerotier/ZeroTierOne/blob/master/node/Utils.hpp#L695
Major new features are:
* **Multipath support** with modes modeled after the Linux kernel's bonding driver. This includes active-passive and active-active modes with fast failover and load balancing. See section 2.1.5 of the manual.
* **DNS configuration** push from network controllers to end nodes, with locally configurable permissions for whether or not push is allowed.
* **AES-GMAC-SIV** encryption mode, which is both somewhat more secure and significantly faster than the old Salsa20/12-Poly1305 mode on hardware that supports AES acceleration. This includes virtually all X86-64 chips and most ARM64. This mode is based on AES-SIV and has been audited by Trail of Bits to ensure that it is equivalent security-wise.
Known issues that are not yet fixed in this beta:
* Some Mac users have reported periods of 100% CPU in kernel_task and connection instability after leaving networks that have been joined for a period of time, or needing to kill ZeroTier and restart it to finish leaving a network. This doesn't appear to affect all users and we haven't diagnosed the root cause yet.
* The service sometimes hangs on shutdown requiring a kill -9. This also does not affect all systems or users.
* AES hardware acceleration is not yet supported on 32-bit ARM, PowerPC (32 or 64), or MIPS (32 or 64) systems. Currently supported are X86-64 and ARM64/AARCH64 with crypto extensions.
* Some users have reported multicast/broadcast outages on networks lasting up to 30 seconds. Still investigating.
We're trying to fix all these issues before the 1.6.0 release. Stay tuned.
Just adding it to the repo, but it still needs to be dealt with during install.
Probably put it in $ZT_HOME and then symlink to the proper place for the distro?
searches $ZT_HOME/networks.d/ for network IDs
searches HISTORY for 16 digit numbers that look like network IDs.
If a redis cluster member fails over to the slave, we'll get an error from not specifying the key for the insert. Recover from that instead of crashing the controller
On system shutdown, zerotier is stopped after the network and gets
itself into a connection timeout loop. It hits the TimeoutStopUSec= and
is forcibly killed by SIGKILL. Order zerotier after network.target so it
can shutdown gracefully while the network is still up.
From systemd.special(7):
at shutdown, a unit that is ordered after network.target will be stopped
before the network — to whatever level it might be set up then — is shut
down. It is hence useful when writing service files that require network
access on shutdown, which should order themselves after this target, but
not pull it in
* ARM32 platform build and flag fixes
* Add a clarification line to LICENSE.txt
* Fix license message in CLI
* Windows service now looks for service command line arguments
* Fixed a bug that could cause excessive queued multicasts
**Is your featurerequest related to a problem? Please describe.**
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
If there is something you'd like to have added to ZeroTier, to go to https://discuss.zerotier.com/c/feature-requests/ instead. Issues there can be voted on and discussed in-depth.
**Describe the solution you'd like**
A clear and concise description of what you want to happen.
**Describe alternatives you've considered**
A clear and concise description of any alternative solutions or features you've considered.
**Additional context**
Add any other context or screenshots about the feature request here.
about:Game issues are better served by forum posts
title:Please go to our Discuss or Reddit for game-related issues. Thanks!
labels:wontfix
assignees:''
---
Are you having trouble connecting to a game on your virtual network after installing ZeroTier?
- [ ] Yes
- [ ] No
If you answered yes, then it is very likely that your question would be better answered on our [Community Forums](https://discuss.zerotier.com) or [Reddit](https://www.reddit.com/r/zerotier/) community; we monitor both regularly. We also have extensive documentation on our [Knowledge Base](https://zerotier.atlassian.net/wiki/spaces/SD/overview). Thank you!
ZeroTier includes the following third party code, either in ext/ or incorporated into the ZeroTier core.
* LZ4 compression algorithm by Yann Collet
* Files: node/Packet.cpp (bundled within anonymous namespace)
* Home page: http://code.google.com/p/lz4/
* License grant: BSD 2-clause
* http-parser by Joyent, Inc. (many authors)
* Files: ext/http-parser/*
* Home page: https://github.com/joyent/http-parser/
* License grant: MIT/Expat
* C++11 json (nlohmann/json) by Niels Lohmann
* Files: ext/json/*
* Home page: https://github.com/nlohmann/json
* License grant: MIT
* tap-windows6 by the OpenVPN project
* Files: windows/TapDriver6/*
* Home page: https://github.com/OpenVPN/tap-windows6/
* License grant: GNU GPL v2
* ZeroTier Modifications: change name of driver to ZeroTier, add ioctl() to get L2 multicast memberships (source is in ext/ and modifications inherit GPL)
* Salsa20 stream cipher, Curve25519 elliptic curve cipher, Ed25519 digital signature algorithm, and Poly1305 MAC algorithm, all by Daniel J. Bernstein
{"name":"linux-controller-release","inherits":"linux-base","displayName":"Linux Central Controller (Release)","cacheVariables":{"ZT1_CENTRAL_CONTROLLER":"ON"}},
{"name":"linux-controller-debug","inherits":"linux-base","displayName":"Linux Central Controller (Debug)","cacheVariables":{"ZT1_CENTRAL_CONTROLLER":"ON","CMAKE_BUILD_TYPE":"Debug"}},
{"name":"linux-free-release","inherits":"linux-base","displayName":"Linux daemon, free / no controller (Release)","cacheVariables":{"ZT_NONFREE":"OFF"}},
{"name":"linux-free-debug","inherits":"linux-base","displayName":"Linux daemon, free / no controller (Debug)","cacheVariables":{"ZT_NONFREE":"OFF","CMAKE_BUILD_TYPE":"Debug"}},
{"name":"macos-controller-release","inherits":"macos-base","displayName":"macOS Central Controller (Release)","cacheVariables":{"ZT1_CENTRAL_CONTROLLER":"ON"}},
{"name":"macos-controller-debug","inherits":"macos-base","displayName":"macOS Central Controller (Debug)","cacheVariables":{"ZT1_CENTRAL_CONTROLLER":"ON","CMAKE_BUILD_TYPE":"Debug"}},
{"name":"macos-free-release","inherits":"macos-base","displayName":"macOS daemon, free / no controller (Release)","cacheVariables":{"ZT_NONFREE":"OFF"}},
{"name":"macos-free-debug","inherits":"macos-base","displayName":"macOS daemon, free / no controller (Debug)","cacheVariables":{"ZT_NONFREE":"OFF","CMAKE_BUILD_TYPE":"Debug"}},
RUN apt-get update -qq && apt-get -qq install make clang
COPY . .
RUN /usr/bin/make
RUNecho$PWD
RUN cp zerotier-one /usr/sbin
FROMubuntu:21.04
COPY --from=stage /zerotier-one /usr/sbin
RUN ln -sf /usr/sbin/zerotier-one /usr/sbin/zerotier-idtool
RUN ln -sf /usr/sbin/zerotier-one /usr/sbin/zerotier-cli
RUNecho"${VERSION}" > /etc/zerotier-version
RUN rm -rf /var/lib/zerotier-one
RUN apt-get -qq update
RUN apt-get -qq install iproute2 net-tools fping 2ping iputils-ping iputils-arping
COPY entrypoint.sh.release /entrypoint.sh
RUN chmod 755 /entrypoint.sh
CMD[]
ENTRYPOINT["/entrypoint.sh"]
Loaded 20 of 1866 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Grant Limberg
Grant Limberg
Dimitriy Dade
countbinoculars
Chris Spiegel
Adam Ierymenko
Joseph Henry
Chris Spiegel
Luke Souter
Adam Ierymenko
Lennon Day-Reynolds
Jeremy Fleischman
Aaron JohnsonandClaude
William Yates
dependabot[bot]
Travis LaDuke
sh1ve
Joseph Henry
Chris Carini
Jörg Thalheim
Brenton Bostick
Alfred Wingate
Sean OMeara
Federico Pellegrin
Tim Smith
zjslqshqz
Léo El Amri
Kenny MacDermidandJoseph Henry
lison
Jake Vis
Stavros Kois
Monica Moniot
zwf
Gleb Mazovetskiy
Sean OMeara
grapexy
Anders Jenbo
visuve
DQandDaniel Quinlan
TossPig
David Baird
Erik Hollensbe
Sean McAvoy
fuowang
Alan Norbauer
hcwhan
Shawn
Ka Ho Ng
staphen
Andrej Binder
capruro
capruro
rjsocha
channelbeta
Grant Limberg
Erik Hollensbe
Kamil Cholewinski
Jonathon Fernyhough
Robert.Schreib
Dave Cottlehuber
xumng123
Pablo Hinojosa
Erik Hollensbe
YI
showipintbri
bradleydiggs
David Nadlinger
Aaron LI
Rosen Penev
Joseph Henry
Vincent Milum Jr
Michael Adams
thoradia
Suad Halilovic
Gleb Panov
Athanasios Oikonomou
root
Kevin Kuehler
0xflotus
wendelb