Adds support for "linkSelectMethod" as the JSON configuration field name
while maintaining backward compatibility with the legacy "activeReselect"
field name.
This change aligns the JSON field name with the internal API naming
convention (setLinkSelectMethod/getLinkSelectMethod) and follows the
established pattern in the codebase where JSON field names match their
corresponding setter method names.
The implementation:
- Checks for the new field name first, then falls back to the legacy name
- Emits a deprecation warning when "activeReselect" is used
- Ensures existing configurations continue to work without modification
Resolves terminology inconsistency identified in docs PR #263🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
also removed some spans from the networks/members db watcher. Those will be 5 seconds long no matter what, and the underlying processes already have their own spans
* Bump version in most places.
* Update official release steps for desktop
* Version bump a bunch of Rust packages.
* Windows fix for disabling MT properly.
* Release notes.
In nixpkgs we use coreutils and do not have PWD available.
This change have any downsides on normal macOS systems, but helps
nixpkgs packaging a bit.
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
Update the minimal compilers in documentation. As `std=c++17` is used the minimal got quite bumped from last update. For gcc 7.x would seem possibly enough, but some of the dependencies (eg. libpqxx) need 8.x at least, so setting that as documented minimum.
cpp-httplib sets IPV6_V6ONLY to false on it's sockets.
On FreeBSD, this makes all ipv4 addresses get get prefixed with ::ffff:
it makes them IPv6 addresses mapped to v4.
This is a partial fix for #2151. The cli will work again.
Something should probably also be adjusted with the httplib.
If you want to, for example, use the `allowManagementFrom` option in
local.conf
you will need to prefix it with "::ffff:", "::ffff:1.2.3.4"
which is a little surprising and inconsistent between BSD and other OSs.
Want to show it in UIs. So need to get it via API.
It's also a pain to look up. You have to go to external docs.
zerotier-cli info -j
```json
"config": {
"settings": {
"allowTcpFallbackRelay": true,
"forceTcpRelay": true,
"homeDir": "/Library/Application Support/ZeroTier/One",
```
```sh
curl -s -X POST "http://localhost:9993/controller/network/abcdabcdabcdabcd/member/1122334455"
```
Would return 200 and ZT_HOME/controller.d/abcdabcdabcdabcd/members/1122334455
would be created. Without a ZT_HOME/controller.d/abcdabcdabcdabcd.json
Then other parts of the system mistakenly think a abcdabcdabcdabcd
network sorta kinda exists and then fail in weird ways.
There was as Windows directory traversal bug in the static
file server feature. We don't use that feature, so we are ok.
We are going to use that feature soon, so we are
taking the opportunity to update.
Add /unstable/controller/network endpoint
Similar to /unstable/controller/network/{id}/member, it returns actual network objects,
instead of just network ids.
Also includes the total network count,
and each network has it's member counts in meta{}.
The current api at /controller/network/1111111111767f2f/member
Lists only the members' ID and revision number.
If you want details, you have to query each specific member.
So if you want to make a members list, and you have
10000 members on a network, you need to make
10000 http requests.
It's also in a hard to specify and use shape
{ [member-id-1]: 13, [member-id-2]: 14, ... }
GET http://localhost:9993/unstable/controller/network/1111111111767f2f/member ->
```
{
data: [ {...member1}, {...member2}, ...],
meta: { totalCount: 4, authorizedCount: 3 }
}
```
It wasn't ignoring separator characters such as the colon and hyphen.
The rules compiler automatically add a colon to separate bytes, which is
not compatible with how they are parsed.
* Better compatibility with LLVM toolchain where clang -c doesn't
support the flag, but the linker does. LLD already defaults to
noexecstack, but adding it in the linker phase will avoid errors about
unsupported options.
Signed-off-by: Alfred Wingate <parona@protonmail.com>
This makes switching between physical networks
with full tunnel mode enabled more reliable.
There were issues with the physical default route or device
changing.
* 1.10.6 merge to main (#1930)
* add note about forceTcpRelay
* Create a sample systemd unit for tcp proxy
* set gitattributes for rust & cargo so hashes dont conflict on Windows
* Revert "set gitattributes for rust & cargo so hashes dont conflict on Windows"
This reverts commit 032dc5c108.
* Turn off autocrlf for rust source
Doesn't appear to play nice well when it comes to git and vendored cargo package hashes
* Fix#1883 (#1886)
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
* Don't vendor packages for zeroidc (#1885)
* Added docker environment way to join networks (#1871)
* add StringUtils
* fix headers
use recommended headers and remove unused headers
* move extern "C"
only JNI functions need to be exported
* cleanup
* fix ANDROID-50: RESULT_ERROR_BAD_PARAMETER typo
* fix typo in log message
* fix typos in JNI method signatures
* fix typo
* fix ANDROID-51: fieldName is uninitialized
* fix ANDROID-35: memory leak
* fix missing DeleteLocalRef in loops
* update to use unique error codes
* add GETENV macro
* add LOG_TAG defines
* ANDROID-48: add ZT_jnicache.cpp
* ANDROID-48: use ZT_jnicache.cpp and remove ZT_jnilookup.cpp and ZT_jniarray.cpp
* add Event.fromInt
* add PeerRole.fromInt
* add ResultCode.fromInt
* fix ANDROID-36: issues with ResultCode
* add VirtualNetworkConfigOperation.fromInt
* fix ANDROID-40: VirtualNetworkConfigOperation out-of-sync with ZT_VirtualNetworkConfigOperation enum
* add VirtualNetworkStatus.fromInt
* fix ANDROID-37: VirtualNetworkStatus out-of-sync with ZT_VirtualNetworkStatus enum
* add VirtualNetworkType.fromInt
* make NodeStatus a plain data class
* fix ANDROID-52: synchronization bug with nodeMap
* Node init work: separate Node construction and init
* add Node.toString
* make PeerPhysicalPath a plain data class
* remove unused PeerPhysicalPath.fixed
* add array functions
* make Peer a plain data class
* make Version a plain data class
* fix ANDROID-42: copy/paste error
* fix ANDROID-49: VirtualNetworkConfig.equals is wrong
* reimplement VirtualNetworkConfig.equals
* reimplement VirtualNetworkConfig.compareTo
* add VirtualNetworkConfig.hashCode
* make VirtualNetworkConfig a plain data class
* remove unused VirtualNetworkConfig.enabled
* reimplement VirtualNetworkDNS.equals
* add VirtualNetworkDNS.hashCode
* make VirtualNetworkDNS a plain data class
* reimplement VirtualNetworkRoute.equals
* reimplement VirtualNetworkRoute.compareTo
* reimplement VirtualNetworkRoute.toString
* add VirtualNetworkRoute.hashCode
* make VirtualNetworkRoute a plain data class
* add isSocketAddressEmpty
* add addressPort
* add fromSocketAddressObject
* invert logic in a couple of places and return early
* newInetAddress and newInetSocketAddress work
allow newInetSocketAddress to return NULL if given empty address
* fix ANDROID-38: stack corruption in onSendPacketRequested
* use GETENV macro
* JniRef work
JniRef does not use callbacks struct, so remove
fix NewGlobalRef / DeleteGlobalRef mismatch
* use PRId64 macros
* switch statement work
* comments and logging
* Modifier 'public' is redundant for interface members
* NodeException can be made a checked Exception
* 'NodeException' does not define a 'serialVersionUID' field
* 'finalize()' should not be overridden
this is fine to do because ZeroTierOneService calls close() when it is done
* error handling, error reporting, asserts, logging
* simplify loadLibrary
* rename Node.networks -> Node.networkConfigs
* Windows file permissions fix (#1887)
* Allow macOS interfaces to use multiple IP addresses (#1879)
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Fix condition where full HELLOs might not be sent when necessary (#1877)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* 1.10.4 version bumps
* Add security policy to repo (#1889)
* [+] add e2k64 arch (#1890)
* temp fix for ANDROID-56: crash inside newNetworkConfig from too many args
* 1.10.4 release notes
* Windows 1.10.4 Advanced Installer bump
* Revert "temp fix for ANDROID-56: crash inside newNetworkConfig from too many args"
This reverts commit dd627cd7f4.
* actual fix for ANDROID-56: crash inside newNetworkConfig
cast all arguments to varargs functions as good style
* Fix addIp being called with applied ips (#1897)
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
* 1.10.5 (#1905)
* 1.10.5 bump
* 1.10.5 for Windows
* 1.10.5
* Prevent path-learning loops (#1914)
* Prevent path-learning loops
* Only allow new overwrite if not bonded
* fix binding temporary ipv6 addresses on macos (#1910)
The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
* 1.10.6 (#1929)
* 1.10.5 bump
* 1.10.6
* 1.10.6 AIP for Windows.
---------
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
* 1.12.0 merge to main (#2104)
* add note about forceTcpRelay
* Create a sample systemd unit for tcp proxy
* set gitattributes for rust & cargo so hashes dont conflict on Windows
* Revert "set gitattributes for rust & cargo so hashes dont conflict on Windows"
This reverts commit 032dc5c108.
* Turn off autocrlf for rust source
Doesn't appear to play nice well when it comes to git and vendored cargo package hashes
* Fix#1883 (#1886)
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
* Don't vendor packages for zeroidc (#1885)
* Added docker environment way to join networks (#1871)
* add StringUtils
* fix headers
use recommended headers and remove unused headers
* move extern "C"
only JNI functions need to be exported
* cleanup
* fix ANDROID-50: RESULT_ERROR_BAD_PARAMETER typo
* fix typo in log message
* fix typos in JNI method signatures
* fix typo
* fix ANDROID-51: fieldName is uninitialized
* fix ANDROID-35: memory leak
* fix missing DeleteLocalRef in loops
* update to use unique error codes
* add GETENV macro
* add LOG_TAG defines
* ANDROID-48: add ZT_jnicache.cpp
* ANDROID-48: use ZT_jnicache.cpp and remove ZT_jnilookup.cpp and ZT_jniarray.cpp
* add Event.fromInt
* add PeerRole.fromInt
* add ResultCode.fromInt
* fix ANDROID-36: issues with ResultCode
* add VirtualNetworkConfigOperation.fromInt
* fix ANDROID-40: VirtualNetworkConfigOperation out-of-sync with ZT_VirtualNetworkConfigOperation enum
* add VirtualNetworkStatus.fromInt
* fix ANDROID-37: VirtualNetworkStatus out-of-sync with ZT_VirtualNetworkStatus enum
* add VirtualNetworkType.fromInt
* make NodeStatus a plain data class
* fix ANDROID-52: synchronization bug with nodeMap
* Node init work: separate Node construction and init
* add Node.toString
* make PeerPhysicalPath a plain data class
* remove unused PeerPhysicalPath.fixed
* add array functions
* make Peer a plain data class
* make Version a plain data class
* fix ANDROID-42: copy/paste error
* fix ANDROID-49: VirtualNetworkConfig.equals is wrong
* reimplement VirtualNetworkConfig.equals
* reimplement VirtualNetworkConfig.compareTo
* add VirtualNetworkConfig.hashCode
* make VirtualNetworkConfig a plain data class
* remove unused VirtualNetworkConfig.enabled
* reimplement VirtualNetworkDNS.equals
* add VirtualNetworkDNS.hashCode
* make VirtualNetworkDNS a plain data class
* reimplement VirtualNetworkRoute.equals
* reimplement VirtualNetworkRoute.compareTo
* reimplement VirtualNetworkRoute.toString
* add VirtualNetworkRoute.hashCode
* make VirtualNetworkRoute a plain data class
* add isSocketAddressEmpty
* add addressPort
* add fromSocketAddressObject
* invert logic in a couple of places and return early
* newInetAddress and newInetSocketAddress work
allow newInetSocketAddress to return NULL if given empty address
* fix ANDROID-38: stack corruption in onSendPacketRequested
* use GETENV macro
* JniRef work
JniRef does not use callbacks struct, so remove
fix NewGlobalRef / DeleteGlobalRef mismatch
* use PRId64 macros
* switch statement work
* comments and logging
* Modifier 'public' is redundant for interface members
* NodeException can be made a checked Exception
* 'NodeException' does not define a 'serialVersionUID' field
* 'finalize()' should not be overridden
this is fine to do because ZeroTierOneService calls close() when it is done
* error handling, error reporting, asserts, logging
* simplify loadLibrary
* rename Node.networks -> Node.networkConfigs
* Windows file permissions fix (#1887)
* Allow macOS interfaces to use multiple IP addresses (#1879)
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Fix condition where full HELLOs might not be sent when necessary (#1877)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* 1.10.4 version bumps
* Add security policy to repo (#1889)
* [+] add e2k64 arch (#1890)
* temp fix for ANDROID-56: crash inside newNetworkConfig from too many args
* 1.10.4 release notes
* Windows 1.10.4 Advanced Installer bump
* Revert "temp fix for ANDROID-56: crash inside newNetworkConfig from too many args"
This reverts commit dd627cd7f4.
* actual fix for ANDROID-56: crash inside newNetworkConfig
cast all arguments to varargs functions as good style
* Fix addIp being called with applied ips (#1897)
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
* 1.10.5 (#1905)
* 1.10.5 bump
* 1.10.5 for Windows
* 1.10.5
* Prevent path-learning loops (#1914)
* Prevent path-learning loops
* Only allow new overwrite if not bonded
* fix binding temporary ipv6 addresses on macos (#1910)
The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
* 1.10.6 (#1929)
* 1.10.5 bump
* 1.10.6
* 1.10.6 AIP for Windows.
* Release notes for 1.10.6 (#1931)
* Minor tweak to Synology Docker image script (#1936)
* Change if_def again so ios can build (#1937)
All apple's variables are "defined"
but sometimes they are defined as "0"
* move begin/commit into try/catch block (#1932)
Thread was exiting in some cases
* Bump openssl from 0.10.45 to 0.10.48 in /zeroidc (#1938)
Bumps [openssl](https://github.com/sfackler/rust-openssl) from 0.10.45 to 0.10.48.
- [Release notes](https://github.com/sfackler/rust-openssl/releases)
- [Commits](https://github.com/sfackler/rust-openssl/compare/openssl-v0.10.45...openssl-v0.10.48)
---
updated-dependencies:
- dependency-name: openssl
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* new drone bits
* Fix multiple network join from environment entrypoint.sh.release (#1961)
* _bond_m guards _bond, not _paths_m (#1965)
* Fix: warning: mutex '_aqm_m' is not held on every path through here [-Wthread-safety-analysis] (#1964)
* Bump h2 from 0.3.16 to 0.3.17 in /zeroidc (#1963)
Bumps [h2](https://github.com/hyperium/h2) from 0.3.16 to 0.3.17.
- [Release notes](https://github.com/hyperium/h2/releases)
- [Changelog](https://github.com/hyperium/h2/blob/master/CHANGELOG.md)
- [Commits](https://github.com/hyperium/h2/compare/v0.3.16...v0.3.17)
---
updated-dependencies:
- dependency-name: h2
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Add note that binutils is required on FreeBSD (#1968)
* Add prometheus metrics for Central controllers (#1969)
* add header-only prometheus lib to ext
* rename folder
* Undo rename directory
* prometheus simpleapi included on mac & linux
* wip
* wire up some controller stats
* Get windows building with prometheus
* bsd build flags for prometheus
* Fix multiple network join from environment entrypoint.sh.release (#1961)
* _bond_m guards _bond, not _paths_m (#1965)
* Fix: warning: mutex '_aqm_m' is not held on every path through here [-Wthread-safety-analysis] (#1964)
* Serve prom metrics from /metrics endpoint
* Add prom metrics for Central controller specific things
* reorganize metric initialization
* testing out a labled gauge on Networks
* increment error counter on throw
* Consolidate metrics definitions
Put all metric definitions into node/Metrics.hpp. Accessed as needed
from there.
* Revert "testing out a labled gauge on Networks"
This reverts commit 499ed6d95e.
* still blows up but adding to the record for completeness right now
* Fix runtime issues with metrics
* Add metrics files to visual studio project
* Missed an "extern"
* add copyright headers to new files
* Add metrics for sent/received bytes (total)
* put /metrics endpoint behind auth
* sendto returns int on Win32
---------
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
* Central startup update (#1973)
* allow specifying authtoken in central startup
* set allowManagedFrom
* move redis_mem_notification to the correct place
* add node checkins metric
* wire up min/max connection pool size metrics
* x86_64-unknown-linux-gnu on ubuntu runner (#1975)
* adding incoming zt packet type metrics (#1976)
* use cpp-httplib for HTTP control plane (#1979)
refactored the old control plane code to use [cpp-httplib](https://github.com/yhirose/cpp-httplib) instead of a hand rolled HTTP server. Makes the control plane code much more legible. Also no longer randomly stops responding.
* Outgoing Packet Metrics (#1980)
add tx/rx labels to packet counters and add metrics for outgoing packets
* Add short-term validation test workflow (#1974)
Add short-term validation test workflow
* Brenton/curly braces (#1971)
* fix formatting
* properly adjust various lines
breakup multiple statements onto multiple lines
* insert {} around if, for, etc.
* Fix rust dependency caching (#1983)
* fun with rust caching
* kick
* comment out invalid yaml keys for now
* Caching should now work
* re-add/rename key directives
* bump
* bump
* bump
* Don't force rebuild on Windows build GH Action (#1985)
Switching `/t:ZeroTierOne:Rebuild` to just `/t:ZeroTierOne` allows the Windows build to use the rust cache. `/t:ZeroTierOne:Rebuild` cleared the cache before building.
* More packet metrics (#1982)
* found path negotation sends that weren't accounted for
* Fix histogram so it will actually compile
* Found more places for packet metrics
* separate the bind & listen calls on the http backplane (#1988)
* fix memory leak (#1992)
* fix a couple of metrics (#1989)
* More aggressive CLI spamming (#1993)
* fix type signatures (#1991)
* Network-metrics (#1994)
* Add a couple quick functions for converting a uint64_t network ID/node ID into std::string
* Network metrics
* Peer metrics (#1995)
* Adding peer metrics
still need to be wired up for use
* per peer packet metrics
* Fix crash from bad instantiation of histogram
* separate alive & dead path counts
* Add peer metric update block
* add peer latency values in doPingAndKeepalive
* prevent deadlock
* peer latency histogram actually works now
* cleanup
* capture counts of packets to specific peers
---------
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
* Metrics consolidation (#1997)
* Rename zt_packet_incoming -> zt_packet
Also consolidate zt_peer_packets into a single metric with tx and rx labels. Same for ztc_tcp_data and ztc_udp_data
* Further collapse tcp & udp into metric labels for zt_data
* Fix zt_data metric description
* zt_peer_packets description fix
* Consolidate incoming/outgoing network packets to a single metric
* zt_incoming_packet_error -> zt_packet_error
* Disable peer metrics for central controllers
Can change in the future if needed, but given the traffic our controllers serve, that's going to be a *lot* of data
* Disable peer metrics for controllers pt 2
* Update readme files for metrics (#2000)
* Controller Metrics & Network Config Request Fix (#2003)
* add new metrics for network config request queue size and sso expirations
* move sso expiration to its own thread in the controller
* fix potential undefined behavior when modifying a set
* Enable RTTI in Windows build
The new prometheus histogram stuff needs it.
Access violation - no RTTI data!INVALID packet 636ebd9ee8cac6c0 from cafe9efeb9(2605:9880:200:1200:30:571:e34:51/9993) (unexpected exception in tryDecode())
* Don't re-apply routes on BSD
See issue #1986
* Capture setContent by-value instead of by-reference (#2006)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* fix typos (#2010)
* central controller metrics & request path updates (#2012)
* internal db metrics
* use shared mutexes for read/write locks
* remove this lock. only used for a metric
* more metrics
* remove exploratory metrics
place controller request benchmarks behind ifdef
* Improve validation test (#2013)
* fix init order for EmbeddedNetworkController (#2014)
* add constant for getifaddrs cache time
* cache getifaddrs - mac
* cache getifaddrs - linux
* cache getifaddrs - bsd
* cache getifaddrs - windows
* Fix oidc client lookup query
join condition referenced the wrong table. Worked fine unless there were multiple identical client IDs
* Fix udp sent metric
was only incrementing by 1 for each packet sent
* Allow sending all surface addresses to peer in low-bandwidth mode
* allow enabling of low bandwidth mode on controllers
* don't unborrow bad connections
pool will clean them up later
* Multi-arch controller container (#2037)
create arm64 & amd64 images for central controller
* Update README.md
issue #2009
* docker tags change
* fix oidc auth url memory leak (#2031)
getAuthURL() was not calling zeroidc::free_cstr(url);
the only place authAuthURL is called, the url can be retrieved
from the network config instead.
You could alternatively copy the string and call free_cstr in getAuthURL.
If that's better we can change the PR.
Since now there are no callers of getAuthURL I deleted it.
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Bump openssl from 0.10.48 to 0.10.55 in /zeroidc (#2034)
Bumps [openssl](https://github.com/sfackler/rust-openssl) from 0.10.48 to 0.10.55.
- [Release notes](https://github.com/sfackler/rust-openssl/releases)
- [Commits](https://github.com/sfackler/rust-openssl/compare/openssl-v0.10.48...openssl-v0.10.55)
---
updated-dependencies:
- dependency-name: openssl
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* zeroidc cargo warnings (#2029)
* fix unused struct member cargo warning
* fix unused import cargo warning
* fix unused return value cargo warning
---------
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* fix memory leak in macos ipv6/dns helper (#2030)
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* Consider ZEROTIER_JOIN_NETWORKS in healthcheck (#1978)
* Add a 2nd auth token only for access to /metrics (#2043)
* Add a 2nd auth token for /metrics
Allows administrators to distribute a token that only has access to read
metrics and nothing else.
Also added support for using bearer auth tokens for both types of tokens
Separate endpoint for metrics #2041
* Update readme
* fix a couple of cases of writing the wrong token
* Add warning to cli for allow default on FreeBSD
It doesn't work.
Not possible to fix with deficient network
stack and APIs.
ZeroTierOne-freebsd # zerotier-cli set 9bee8941b5xxxxxx allowDefault=1
400 set Allow Default does not work properly on FreeBSD. See #580
root@freebsd13-a:~/ZeroTierOne-freebsd # zerotier-cli get 9bee8941b5xxxxxx allowDefault
1
* ARM64 Support for TapDriver6 (#1949)
* Release memory previously allocated by UPNP_GetValidIGD
* Fix ifdef that breaks libzt on iOS (#2050)
* less drone (#2060)
* Exit if loading an invalid identity from disk (#2058)
* Exit if loading an invalid identity from disk
Previously, if an invalid identity was loaded from disk, ZeroTier would
generate a new identity & chug along and generate a brand new identity
as if nothing happened. When running in containers, this introduces the
possibility for key matter loss; especially when running in containers
where the identity files are mounted in the container read only. In
this case, ZT will continue chugging along with a brand new identity
with no possibility of recovering the private key.
ZeroTier should exit upon loading of invalid identity.public/identity.secret #2056
* add validation test for #2056
* tcp-proxy: fix build
* Adjust tcp-proxy makefile to support metrics
There's no way to get the metrics yet. Someone will
have to add the http service.
* remove ZT_NO_METRIC ifdef
* Implement recvmmsg() for Linux to reduce syscalls. (#2046)
Between 5% and 40% speed improvement on Linux, depending on system configuration and load.
* suppress warnings: comparison of integers of different signs: 'int64_t' (aka 'long') and 'uint64_t' (aka 'unsigned long') [-Wsign-compare] (#2063)
* fix warning: 'OS_STRING' macro redefined [-Wmacro-redefined] (#2064)
Even though this is in ext, these particular chunks of code were added
by us, so are ok to modify.
* Apply default route a different way - macOS
The original way we applied default route, by forking
0.0.0.0/0 into 0/1 and 128/1 works, but if mac os has any networking
hiccups -if you change SSIDs or sleep/wake- macos erases the system default route.
And then all networking on the computer is broken.
to summarize the new way:
allowDefault=1
```
sudo route delete default 192.168.82.1
sudo route add default 10.2.0.2
sudo route add -ifscope en1 default 192.168.82.1
```
gives us this routing table
```
Destination Gateway RT_IFA Flags Refs Use Mtu Netif Expire rtt(ms) rttvar(ms)
default 10.2.0.2 10.2.0.18 UGScg 90 1 2800 feth4823
default 192.168.82.1 192.168.82.217 UGScIg
```
allowDefault=0
```
sudo route delete default
sudo route delete -ifscope en1 default
sudo route add default 192.168.82.1
```
Notice the I flag, for -ifscope, on the physical default route.
route change does not seem to work reliably.
* fix docker tag for controllers (#2066)
* Update build.sh (#2068)
fix mkwork compilation errors
* Fix network DNS on macOS
It stopped working for ipv4 only networks in Monterey.
See #1696
We add some config like so to System Configuration
```
scutil
show State:/Network/Service/9bee8941b5xxxxxx/IPv4
<dictionary> {
Addresses : <array> {
0 : 10.2.1.36
}
InterfaceName : feth4823
Router : 10.2.1.36
ServerAddress : 127.0.0.1
}
```
* Add search domain to macos dns configuration
Stumbled upon this while debugging something else.
If we add search domain to our system configuration for
network DNS, then search domains work:
```
ping server1 ~
PING server1.my.domain (10.123.3.1): 56 data bytes
64 bytes from 10.123.3.1
```
* Fix reporting of secondaryPort and tertiaryPort See: #2039
* Fix typos (#2075)
* Disable executable stacks on assembly objects (#2071)
Add `--noexecstack` to the assembler flags so the resulting binary
will link with a non-executable stack.
Fixeszerotier/ZeroTierOne#1179
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
* Test that starting zerotier before internet works
* Don't skip hellos when there are no paths available
working on #2082
* Update validate-1m-linux.sh
* Save zt node log files on abort
* Separate test and summary step in validator script
* Don't apply default route until zerotier is "online"
I was running into issues with restarting the zerotier service while
"full tunnel" mode is enabled.
When zerotier first boots, it gets network state from the cache
on disk. So it immediately applies all the routes it knew about
before it shutdown.
The network config may have change in this time.
If it has, then your default route is via a route
you are blocked from talking on. So you can't get the current
network config, so your internet does not work.
Other options include
- don't use cached network state on boot
- find a better criteria than "online"
* Fix node time-to-online counter in validator script
* Export variables so that they are accessible by exit function
* Fix PortMapper issue on ZeroTier startup
See issue #2082
We use a call to libnatpmp::ininatpp to make sure the computer
has working network sockets before we go into the main
nat-pmp/upnp logic.
With basic exponenetial delay up to 30 seconds.
* testing
* Comment out PortMapper debug
this got left turned on in a confusing merge previously
* fix macos default route again
see commit fb6af1971 * Fix network DNS on macOS
adding that stuff to System Config causes this extra route to be added
which breaks ipv4 default route.
We figured out a weird System Coniguration setting
that works.
--- old
couldn't figure out how to fix it in SystemConfiguration
so here we are# Please enter the commit message for your changes. Lines starting
We also moved the dns setter to before the syncIps stuff
to help with a race condition. It didn't always work when
you re-joined a network with default route enabled.
* Catch all conditions in switch statement, remove trailing whitespaces
* Add setmtu command, fix bond lifetime issue
* Basic cleanups
* Check if null is passed to VirtualNetworkConfig.equals and name fixes
* ANDROID-96: Simplify and use return code from node_init directly
* Windows arm64 (#2099)
* ARM64 changes for 1.12
* 1.12 Windows advanced installer updates and updates for ARM64
* 1.12.0
* Linux build fixes for old distros.
* release notes
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
Co-authored-by: Jake Vis <jakevis@outlook.com>
Co-authored-by: Jörg Thalheim <joerg@thalheim.io>
Co-authored-by: lison <imlison@foxmail.com>
Co-authored-by: Kenny MacDermid <kenny@macdermid.ca>
* Fix primary port binding issue in 1.12 (#2107)
* Add test for primary port bindings to validator - See #2105
* Add delay to binding test
* Remove TCP binding logic from Binder to fix#2105
* add second control plane socket for ipv6
* fix controller network post endpoint
* exit if we can't bind at least one of IPV4 or IPV6 for control plane port
---------
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
* Version bump, Linux version stuff, Debian dependencies from 1.12.0 rebuild, release notes.
* macOS version bump in installer
* Windows version bump.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: travis laduke <travisladuke@gmail.com>
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
Co-authored-by: Sean OMeara <someara@users.noreply.github.com>
Co-authored-by: Joseph Henry <joseph-henry@users.noreply.github.com>
Co-authored-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
Co-authored-by: Jake Vis <jakevis@outlook.com>
Co-authored-by: Jörg Thalheim <joerg@thalheim.io>
Co-authored-by: lison <imlison@foxmail.com>
Co-authored-by: Kenny MacDermid <kenny@macdermid.ca>
* Add test for primary port bindings to validator - See #2105
* Add delay to binding test
* Remove TCP binding logic from Binder to fix#2105
* add second control plane socket for ipv6
* fix controller network post endpoint
* exit if we can't bind at least one of IPV4 or IPV6 for control plane port
---------
Co-authored-by: Grant Limberg <grant.limberg@zerotier.com>
see commit fb6af1971 * Fix network DNS on macOS
adding that stuff to System Config causes this extra route to be added
which breaks ipv4 default route.
We figured out a weird System Coniguration setting
that works.
--- old
couldn't figure out how to fix it in SystemConfiguration
so here we are# Please enter the commit message for your changes. Lines starting
We also moved the dns setter to before the syncIps stuff
to help with a race condition. It didn't always work when
you re-joined a network with default route enabled.
See issue #2082
We use a call to libnatpmp::ininatpp to make sure the computer
has working network sockets before we go into the main
nat-pmp/upnp logic.
With basic exponenetial delay up to 30 seconds.
I was running into issues with restarting the zerotier service while
"full tunnel" mode is enabled.
When zerotier first boots, it gets network state from the cache
on disk. So it immediately applies all the routes it knew about
before it shutdown.
The network config may have change in this time.
If it has, then your default route is via a route
you are blocked from talking on. So you can't get the current
network config, so your internet does not work.
Other options include
- don't use cached network state on boot
- find a better criteria than "online"
Stumbled upon this while debugging something else.
If we add search domain to our system configuration for
network DNS, then search domains work:
```
ping server1 ~
PING server1.my.domain (10.123.3.1): 56 data bytes
64 bytes from 10.123.3.1
```
It stopped working for ipv4 only networks in Monterey.
See #1696
We add some config like so to System Configuration
```
scutil
show State:/Network/Service/9bee8941b5xxxxxx/IPv4
<dictionary> {
Addresses : <array> {
0 : 10.2.1.36
}
InterfaceName : feth4823
Router : 10.2.1.36
ServerAddress : 127.0.0.1
}
```
The original way we applied default route, by forking
0.0.0.0/0 into 0/1 and 128/1 works, but if mac os has any networking
hiccups -if you change SSIDs or sleep/wake- macos erases the system default route.
And then all networking on the computer is broken.
to summarize the new way:
allowDefault=1
```
sudo route delete default 192.168.82.1
sudo route add default 10.2.0.2
sudo route add -ifscope en1 default 192.168.82.1
```
gives us this routing table
```
Destination Gateway RT_IFA Flags Refs Use Mtu Netif Expire rtt(ms) rttvar(ms)
default 10.2.0.2 10.2.0.18 UGScg 90 1 2800 feth4823
default 192.168.82.1 192.168.82.217 UGScIg
```
allowDefault=0
```
sudo route delete default
sudo route delete -ifscope en1 default
sudo route add default 192.168.82.1
```
Notice the I flag, for -ifscope, on the physical default route.
route change does not seem to work reliably.
* Exit if loading an invalid identity from disk
Previously, if an invalid identity was loaded from disk, ZeroTier would
generate a new identity & chug along and generate a brand new identity
as if nothing happened. When running in containers, this introduces the
possibility for key matter loss; especially when running in containers
where the identity files are mounted in the container read only. In
this case, ZT will continue chugging along with a brand new identity
with no possibility of recovering the private key.
ZeroTier should exit upon loading of invalid identity.public/identity.secret #2056
* add validation test for #2056
It doesn't work.
Not possible to fix with deficient network
stack and APIs.
ZeroTierOne-freebsd # zerotier-cli set 9bee8941b5xxxxxx allowDefault=1
400 set Allow Default does not work properly on FreeBSD. See #580
root@freebsd13-a:~/ZeroTierOne-freebsd # zerotier-cli get 9bee8941b5xxxxxx allowDefault
1
* Add a 2nd auth token for /metrics
Allows administrators to distribute a token that only has access to read
metrics and nothing else.
Also added support for using bearer auth tokens for both types of tokens
Separate endpoint for metrics #2041
* Update readme
* fix a couple of cases of writing the wrong token
getAuthURL() was not calling zeroidc::free_cstr(url);
the only place authAuthURL is called, the url can be retrieved
from the network config instead.
You could alternatively copy the string and call free_cstr in getAuthURL.
If that's better we can change the PR.
Since now there are no callers of getAuthURL I deleted it.
Co-authored-by: Grant Limberg <glimberg@users.noreply.github.com>
* internal db metrics
* use shared mutexes for read/write locks
* remove this lock. only used for a metric
* more metrics
* remove exploratory metrics
place controller request benchmarks behind ifdef
The new prometheus histogram stuff needs it.
Access violation - no RTTI data!INVALID packet 636ebd9ee8cac6c0 from cafe9efeb9(2605:9880:200:1200:30:571:e34:51/9993) (unexpected exception in tryDecode())
* add new metrics for network config request queue size and sso expirations
* move sso expiration to its own thread in the controller
* fix potential undefined behavior when modifying a set
* Rename zt_packet_incoming -> zt_packet
Also consolidate zt_peer_packets into a single metric with tx and rx labels. Same for ztc_tcp_data and ztc_udp_data
* Further collapse tcp & udp into metric labels for zt_data
* Fix zt_data metric description
* zt_peer_packets description fix
* Consolidate incoming/outgoing network packets to a single metric
* zt_incoming_packet_error -> zt_packet_error
* Disable peer metrics for central controllers
Can change in the future if needed, but given the traffic our controllers serve, that's going to be a *lot* of data
* Disable peer metrics for controllers pt 2
* Adding peer metrics
still need to be wired up for use
* per peer packet metrics
* Fix crash from bad instantiation of histogram
* separate alive & dead path counts
* Add peer metric update block
* add peer latency values in doPingAndKeepalive
* prevent deadlock
* peer latency histogram actually works now
* cleanup
* capture counts of packets to specific peers
---------
Co-authored-by: Joseph Henry <joseph.henry@zerotier.com>
Switching `/t:ZeroTierOne:Rebuild` to just `/t:ZeroTierOne` allows the Windows build to use the rust cache. `/t:ZeroTierOne:Rebuild` cleared the cache before building.
refactored the old control plane code to use [cpp-httplib](https://github.com/yhirose/cpp-httplib) instead of a hand rolled HTTP server. Makes the control plane code much more legible. Also no longer randomly stops responding.
* allow specifying authtoken in central startup
* set allowManagedFrom
* move redis_mem_notification to the correct place
* add node checkins metric
* wire up min/max connection pool size metrics
* add header-only prometheus lib to ext
* rename folder
* Undo rename directory
* prometheus simpleapi included on mac & linux
* wip
* wire up some controller stats
* Get windows building with prometheus
* bsd build flags for prometheus
* Fix multiple network join from environment entrypoint.sh.release (#1961)
* _bond_m guards _bond, not _paths_m (#1965)
* Fix: warning: mutex '_aqm_m' is not held on every path through here [-Wthread-safety-analysis] (#1964)
* Serve prom metrics from /metrics endpoint
* Add prom metrics for Central controller specific things
* reorganize metric initialization
* testing out a labled gauge on Networks
* increment error counter on throw
* Consolidate metrics definitions
Put all metric definitions into node/Metrics.hpp. Accessed as needed
from there.
* Revert "testing out a labled gauge on Networks"
This reverts commit 499ed6d95e.
* still blows up but adding to the record for completeness right now
* Fix runtime issues with metrics
* Add metrics files to visual studio project
* Missed an "extern"
* add copyright headers to new files
* Add metrics for sent/received bytes (total)
* put /metrics endpoint behind auth
* sendto returns int on Win32
---------
Co-authored-by: Leonardo Amaral <leleobhz@users.noreply.github.com>
Co-authored-by: Brenton Bostick <bostick@gmail.com>
The check code wasn't running.
I don't know why !defined(TARGET_OS_IOS) would exclude code on
desktop macOS. I did a quick search and changed it to defined(TARGET_OS_MAC).
Not 100% sure what the most correct solution there is.
You can verify the old and new versions with
`ifconfig | grep temporary`
plus
`zerotier-cli info -j` -> listeningOn
This was getting called outside of the check for existing ips
Because of the added ifdef and a brace getting moved to the
wrong place.
```
if (! n.tap()->addIp(*ip)) {
fprintf(stderr, "ERROR: unable to add ip address %s" ZT_EOL_S, ip->toString(ipbuf));
}
WinFWHelper::newICMPRule(*ip, n.config().nwid);
```
Still unknown as to why, but the call to `nc->GetProperties()` can fail
when setting a friendly name on the Windows virtual ethernet adapter.
Ensure that `ncp` is not null before continuing and accessing the device
GUID.
ZeroTier includes the following third party code, either in ext/ or incorporated into the ZeroTier core. This third party code remains licensed under its original license and is not subject to ZeroTier's BSL license.
* LZ4 compression algorithm by Yann Collet
* Files: node/Packet.cpp (bundled within anonymous namespace)
* Home page: http://code.google.com/p/lz4/
* License grant: BSD 2-clause
* http-parser by Joyent, Inc. (many authors)
* Files: ext/http-parser/*
* Home page: https://github.com/joyent/http-parser/
* License grant: MIT/Expat
* C++11 json (nlohmann/json) by Niels Lohmann
* Files: ext/json/*
* Home page: https://github.com/nlohmann/json
* License grant: MIT
* tap-windows6 by the OpenVPN project
* Files: windows/TapDriver6/*
* Home page: https://github.com/OpenVPN/tap-windows6/
* License grant: GNU GPL v2
* ZeroTier Modifications: change name of driver to ZeroTier, add ioctl() to get L2 multicast memberships (source is in ext/ and modifications inherit GPL)
* Salsa20 stream cipher, Curve25519 elliptic curve cipher, Ed25519 digital signature algorithm, and Poly1305 MAC algorithm, all by Daniel J. Bernstein
The final .AIP file can only be edited on Windows with [Advanced Installer Enterprise](http://www.advancedinstaller.com/). In addition to incrementing the version be sure that a new product code is generated. (The "upgrade code" GUID on the other hand must never change.)
@@ -29,4 +30,4 @@ You will need [Packages](http://s.sudre.free.fr/Software/Packages/about.html) an
## Windows
First load the Visual Studio solution and rebuild the UI and ZeroTier One in both x64 and i386`Release` mode. Then load [Advanced Installer Enterprise](http://www.advancedinstaller.com/), check that the version is correct, and build. The build will fail if any build artifacts are missing, and Windows must have our product singing key (from DigiCert) available to sign the resulting MSI file. The MSI must then be tested on at least a few different CLEAN Windows VMs to ensure that the installer is valid and properly signed.
First load the Visual Studio solution and rebuild the UI and ZeroTier One in both x64, i386, and arm64`Release` mode. Then load [Advanced Installer Enterprise](http://www.advancedinstaller.com/), check that the version is correct, and build. The build will fail if any build artifacts are missing, and Windows must have our product singing key (from DigiCert) available to sign the resulting MSI file. The MSI must then be tested on at least a few different CLEAN Windows VMs to ensure that the installer is valid and properly signed.
@@ -44,6 +44,12 @@ The base path contains the ZeroTier One service main entry point (`one.cpp`), se
-`windows/`: Visual Studio solution files, Windows service code, and the Windows task bar app UI.
-`zeroidc/`: OIDC implementation used by ZeroTier service to log into SSO-enabled networks. (This part is written in Rust, and more Rust will be appearing in this repository in the future.)
### Contributing
Please do pull requests off of the `dev` branch.
Releases are done by merging `dev` into `main` and then tagging and doing builds.
### Build and Platform Notes
To build on Mac and Linux just type `make`. On FreeBSD and OpenBSD `gmake` (GNU make) is required and can be installed from packages or ports. For Windows there is a Visual Studio solution in `windows/`.
@@ -52,7 +58,7 @@ To build on Mac and Linux just type `make`. On FreeBSD and OpenBSD `gmake` (GNU
- Xcode command line tools for macOS 10.13 or newer are required.
- Rust for x86_64 and ARM64 targets *if SSO is enabled in the build*.
- **Linux**
- The minimum compiler versions required are GCC/G++ 4.9.3 or CLANG/CLANG++ 3.4.2. (Install `clang` on CentOS 7 as G++ is too old.)
- The minimum compiler versions required are GCC/G++ 8.x or CLANG/CLANG++ 5.x.
- Linux makefiles automatically detect and prefer clang/clang++ if present as it produces smaller and slightly faster binaries in most cases. You can override by supplying CC and CXX variables on the make command line.
- Rust for x86_64 and ARM64 targets *if SSO is enabled in the build*.
- **Windows**
@@ -81,7 +87,7 @@ On most distributions, macOS, and Windows, the installer will start the service
A home folder for your system will automatically be created.
The service is controlled via the JSON API, which by default is available at 127.0.0.1 port 9993. We include a *zerotier-cli* command line utility to make API calls for standard things like joining and leaving networks. The *authtoken.secret* file in the home folder contains the secret token for accessing this API. See [service/README.md](service/README.md) for API documentation.
The service is controlled via the JSON API, which by default is available at `127.0.0.1:9993`. It also listens on `0.0.0.0:9993` which is only usable if `allowManagementFrom` is properly configured in `local.conf`. We include a *zerotier-cli* command line utility to make API calls for standard things like joining and leaving networks. The *authtoken.secret* file in the home folder contains the secret token for accessing this API. See [service/README.md](service/README.md) for API documentation.
Here's where home folders live (by default) on each OS:
@@ -120,7 +126,7 @@ Access control is via the ZeroTier control interface itself and `metricstoken.se
<Run FontSize="14" Text="ZeroTier One allows your computer to join virtual networks. Just select "join" and enter a network's 16-digit ID. Each network appears on your computer as a new network port."/>
</Paragraph>
</FlowDocument>
</RichTextBox>
</Grid>
</Window>
Loaded 20 of 1883 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Joseph Henry
Adam Ierymenko
Adam Ierymenko
Grant Limberg
Grant Limberg
Lennon Day-Reynolds
Jeremy Fleischman
Aaron JohnsonandClaude
William Yates
dependabot[bot]
Travis LaDuke
sh1ve
Joseph Henry
Chris Carini
Jörg Thalheim
Brenton Bostick
Alfred Wingate
Sean OMeara
Federico Pellegrin
Tim Smith
zjslqshqz
LĂ©o El Amri
Kenny MacDermidandJoseph Henry
lison
Jake Vis
Stavros Kois