chore: translate empty bookmark state (#3004)

Co-authored-by: Metin Arslan <GITHUB-EPOSTAN>

.github/workflows/pr-formatting-check.yml

@@ -1,7 +1,6 @@
 name: "PR Formatting"
 
 on:
-  pull_request:
   pull_request_target:
     types:
       - opened
@@ -9,7 +8,7 @@ on:
       - edited
 
 permissions:
-  statuses: write
+  pull-requests: read
 
 jobs:
   title-check:

AGENTS.md

@@ -1 +1 @@
-/home/urit/Documents/CrossPoint/crosspoint-reader/.skills/SKILL.md
+.skills/SKILL.md

README.md

@@ -36,7 +36,7 @@ CrossPoint is open-source e-reader firmware - community-built, fully hackable, f
   - OPDS browser with saved servers (up to 8), search, pagination, and direct download
   - OTA update checks and installs from GitHub releases
 
-- **Customization**: multiple themes (Classic, Lyra, Lyra Extended, RoundedRaff), sleep screen modes, front/side button remapping, status bar controls, power-button behavior, refresh cadence, and more.
+- **Customization**: multiple themes (Classic, Lyra, Lyra Extended, RoundedRaff), sleep screen modes including transparent overlays, front/side button remapping, status bar controls, power-button behavior, refresh cadence, and more.
 
 - **Localization**: 24 UI languages and counting. RTL support.
 
@@ -136,7 +136,7 @@ Conversion runs the firmware repo's `lib/EpdFont/scripts/fontconvert_sdcard.py`
 - [Web server endpoints](./docs/webserver-endpoints.md)
 - [Project scope](./SCOPE.md)
 - [Contributing docs](./docs/contributing/README.md)
-- [Touch and UI development](./docs/contributing/touch-and-ui.md) - FreeInkUI components for new screens, the touch bridge for existing ones, and build envs for the non-Xteink touch devices
+- [Touch and UI development](./docs/contributing/touch-and-ui.md) - how to build new screens on the FreeInkUI activity bases (UiListActivity and friends), plus build envs for the non-Xteink touch devices
 
 ---
 

USER_GUIDE.md

@@ -186,7 +186,7 @@ The Settings screen allows you to configure the device's behavior. There are a f
   - "None" - A blank screen
   - "Cover + Custom" - The book cover image while actively reading, falls back to "Custom" behavior otherwise
   - "Quick resume" - The text of the last page read will be displayed on the sleep screen and a moon icon is shown on the edge of the screen. Waking up the device will return to the same page of the opened book. This is useful for quickly resuming reading without waiting for the device to fully wake up and load the book.
-
+  - "Transparent" - A transparent overlay image drawn over the current screen; see [Sleep Screen](#37-sleep-screen) below for more information
 - **Sleep Screen Cover Mode**: How to display the book cover when "Cover" sleep screen is selected:
   
   - "Fit" (default) - Scale the image down to fit centered on the screen, padding with white borders as necessary
@@ -501,6 +501,7 @@ The **Sleep Screen** setting controls what is displayed when the device goes to
 | **Custom**         | A custom image from the SD card (see below). Falls back to **Dark** if no custom image is found.                             |
 | **Cover**          | The cover of the currently open book. Falls back to **Dark** if no book is open.                                             |
 | **Cover + Custom** | The cover of the currently open book, shown only while actively reading. Falls back to **Custom** behavior when not reading. |
+| **Transparent**    | A BMP overlay drawn over the current screen. Supports alpha transparency in 32-bit BGRA images and treats white as transparent in regular BMPs. Falls back to **Dark** if no valid overlay image is found. |
 | **None**           | A blank screen.                                                                                                              |
 
 #### Cover settings
@@ -515,12 +516,21 @@ When using **Cover** or **Cover + Custom**, two additional settings apply:
 To use custom sleep images, set the sleep screen mode to **Custom** or **Cover + Custom**, then place images on the SD card:
 
 - **Multiple Images (recommended):** Create a `.sleep` directory in the root of the SD card and place any number of `.bmp` images inside. One will be randomly selected each time the device sleeps. (A directory named `sleep` is also accepted as a fallback.)
-- **Single Image:** Place a file named `sleep.bmp` in the root directory. This is used as a fallback if no valid images are found in the `.sleep`/`sleep` directory.
+- **Single Image:** Place a file named `sleep.bmp` in the root directory. This takes priority over the `.sleep`/`sleep` directories.
+
+#### Transparent overlay images
+
+To use transparent sleep overlays, set the sleep screen mode to **Transparent**, then place BMP files on the SD card:
+
+- **Multiple Images (recommended):** Create a `.sleep-overlay` directory in the root of the SD card and place any number of valid overlay `.bmp` images inside. One will be randomly selected each time the device sleeps. A directory named `sleep-overlay` is also accepted as a fallback.
+- **Single Image:** Place a file named `sleep-overlay.bmp` in the root directory. This takes priority over the `.sleep-overlay`/`sleep-overlay` directories.
+
+Transparent overlay files are intentionally separate from normal sleep images. Regular BMP formats supported by CrossPoint are accepted; white pixels leave the existing screen unchanged. For per-pixel alpha transparency, use a 32-bit BGRA BMP with both visible and non-opaque pixels. Opaque white pixels in these alpha images erase the content behind them.
 
 > [!TIP]
 > For best results:
-> 
-> - Use uncompressed BMP files with 24-bit color depth
+> - For non-transparent **Custom** mode, use uncompressed BMP files with 24-bit color depth.
+> - For **Transparent** mode, use a regular BMP for white-as-transparent artwork or an uncompressed 32-bit BGRA BMP for per-pixel alpha.
 > - X4: Use a resolution of 480x800 pixels to match the device's screen resolution.
 > - X3: Use a resolution of 528x792 pixels to match the device's screen resolution.
 

docs/contributing/touch-and-ui.md

@@ -1,23 +1,88 @@
 # Touch and UI Development
 
-CrossPoint now runs on touch devices (Seeed Sticky, M5Paper, LilyGo T5) alongside the button-only Xteink X3/X4. Every screen must work with both input styles. There are two supported ways to get there:
+CrossPoint runs on touch devices (Seeed Sticky, M5Paper, LilyGo T5) alongside the button-only Xteink X3/X4. Every screen must work with both input styles.
 
-1. **New screens: build them with FreeInkUI components.** Touch hit-testing, tap highlighting, long-press, and button focus navigation come with the component; you never hand-roll coordinate math.
-2. **Existing screens and in-flight features: use the MappedInputManager touch bridge.** A small set of helpers adds tap/hold/swipe support to hand-rolled rendering without restructuring the activity.
+**There is one supported way to build a new screen: FreeInkUI, hosted through the firmware base classes below.** Touch hit-testing, tap highlighting, long-press, swipe scrolling, and button focus navigation all come from the shared stack; you never hand-roll coordinate math.
 
-If you are starting a new activity, use FreeInkUI. If you have a feature branch with a hand-rolled screen already working on buttons, use the bridge; do not rewrite mid-flight.
+The old bridge helpers (`rowTouch`, `colTouch`, `wasTapInRect`, manual rect `contains()` checks) are legacy. They survive only for the two remaining hand-rolled surfaces (the theme-driven home screen and the reader page) and must not appear in new code. PRs that add new uses will be asked to convert.
 
 ---
 
-## Path 1: New screens with FreeInkUI
+## Picking the right host
 
-FreeInkUI (`freeink-sdk/libs/ui/FreeInkUI`, namespace `freeink::ui`) is an immediate-mode component library. The core idea:
+| Your screen is... | Use | In-tree reference |
+|---|---|---|
+| A single list of rows | subclass `UiListActivity` | [`LanguageSelectActivity`](../../src/activities/settings/LanguageSelectActivity.cpp) (minimal), [`RecentBooksActivity`](../../src/activities/home/RecentBooksActivity.cpp) (long-press) |
+| Tabbed lists | subclass `UiTabListActivity` | [`SettingsActivity`](../../src/activities/settings/SettingsActivity.cpp) |
+| Custom FUI layout (sliders, prompts, state machines) | inherit `UiAppHost` directly | [`EpubReaderPercentSelectionActivity`](../../src/activities/reader/EpubReaderPercentSelectionActivity.cpp), [`WifiSelectionActivity`](../../src/activities/network/WifiSelectionActivity.cpp) |
+| A modal picker or confirm inside a legacy activity | `OptionPopup` (or push `ConfirmationActivity`) | [`OtaUpdateActivity`](../../src/activities/settings/OtaUpdateActivity.cpp) |
+| A Yes/No prompt inside a FUI screen | build `fui::optionDialog` into the screen | `WifiSelectionActivity::buildPromptDialog` |
 
-- While a component renders, it registers its tappable areas ("hit rects") into the frame's interaction buffer via `Frame::hit(rect, action, value, inputMask, state)`.
-- Each loop you build an `InputSnapshot` from the input manager and route it against that buffer. If a tap (or mapped button press) lands in a registered rect, the routed `ActionEvent` tells you which action fired and with what value.
-- Components query `frame.stateFor(action, value)` while painting, so touch-down highlight and focus states render correctly without any per-activity code.
+All four paths route input through the same SDK interaction table, so touch and physical buttons fire the same actions with no per-screen coordinate code.
 
-You get touch, hold highlighting, long-press, minimum touch-target sizing, and orientation-aware coordinates for free. The same action IDs fire from physical buttons, so one code path serves both input styles.
+## The hosting stack
+
+`UiAppHost` ([src/components/UiAppHost.h](../../src/components/UiAppHost.h)) owns what every FUI screen shares: the font-bound render target, the `FreeInkApp`, and the `uiReady` handshake that lets the loop task route touch snapshots against the interaction table the render task rebuilds. Never re-implement that handshake; it is a cross-task protocol and lives in exactly one place.
+
+`UiListActivity` ([src/activities/UiListActivity.h](../../src/activities/UiListActivity.h)) layers the list protocol on top: swipes scroll the viewport without moving the selection, buttons move the selection and pull the viewport along (`fui::ListNav`), plus the render skeleton (header chrome, app, footer hints). `UiTabListActivity` is the tab-bar sibling; its selection ring puts the tab bar at position 0 and the rows after it.
+
+### New list screen skeleton
+
+Subclasses supply the data; the base owns the loop. The whole contract:
+
+```cpp
+class MyListActivity final : public UiListActivity {
+ public:
+  MyListActivity(GfxRenderer& r, MappedInputManager& in) : UiListActivity("MyList", r, in) {}
+
+ private:
+  std::vector<Entry> entries;       // the activity's data, loaded in onEnter
+  std::vector<fui::ListItem> rows;  // activity-owned row cache: rebuilt only when entries changes, reused every render
+
+  int listCount() const override { return entries.size(); }
+  const char* headerTitle() const override { return tr(STR_MY_TITLE); }
+
+  void onEnter() override {
+    UiListActivity::onEnter();
+    entries = /* ... load from wherever ... */;
+    rebuildRows();
+  }
+
+  // Called whenever entries changes (here, only onEnter; a mutable list would
+  // also call this after any add/remove). NOT called from buildScreen().
+  void rebuildRows() {
+    rows.clear();
+    rows.reserve(entries.size());
+    // ... one fui::ListItem per entry (label, actionValue = index) ...
+  }
+
+  void buildScreen(UiScreen& screen) override {
+    // set content margin from the theme safe area, then:
+    fui::ListProps props;
+    props.items = rows.data();
+    props.count = rows.size();
+    props.action = ACTION_ROW;
+    props.inputMask = fui::InputTouch;  // physical buttons stay in the base loop
+    syncListViewport(screen, props);    // selection/viewport handoff, always right before list()
+    screen.list(props);
+  }
+
+  void activateIndex(int index) override {
+    app.clearTapFlash();  // leaving the screen: a lingering flash would gray the next render
+    // ... open the thing ...
+  }
+};
+```
+
+See [`FileBrowserActivity`](../../src/activities/home/FileBrowserActivity.cpp)'s `rebuildRowItems()` for this pattern applied to a directory listing that can run into the hundreds of entries, and `LanguageSelectActivity.cpp` for the rest of the skeleton (content-margin math, footer, etc.) — note that file still builds its row vector locally inside `buildScreen()`; match `FileBrowserActivity`, not that file, for the row cache. Optional overrides: `onRowLongPress(index)`, `drawFooter()`, `handleButtons()` for extra physical-button handling, and `ACTION_USER`-and-up action ids for non-row elements (register handlers in `onEnter` after the base's).
+
+### Rules that apply to every FUI screen
+
+- Register actions with `app.on(...)` in `onEnter` (after `resetUi()` for direct `UiAppHost` users). Handlers receive a `void* user` you cast back to the activity.
+- Handlers that leave the current screen call `app.clearTapFlash()` first.
+- Theme tokens are shared and bound by `resetUi()`; never call `app.setTheme` yourself. Metrics flow from the active UITheme through [`UIThemeTokens.h`](../../src/components/UIThemeTokens.h), including the per-board bezel insets that keep scrollbars visible.
+- `TextStyle.maxLines` defaults to 1 and truncates with an ellipsis. Set `maxLines` explicitly on any dialog headline or message that can wrap.
+- Everything stays allocation-free in steady state. A local `std::vector` inside `buildScreen()` is **not** allocation-free even with `reserve()` first: it starts at zero capacity on every call, `reserve()` allocates, and the destructor frees that storage before the call returns — real allocator work and fragmentation risk on every repaint (cursor move, tap flash, ...), not just on data changes. Build `ListItem` rows into activity-owned storage instead, reserved once when the underlying data loads (`onEnter()`/a `load*()` — see the skeleton above and `FileBrowserActivity::rebuildRowItems()`), and reused unchanged by every `buildScreen()` call. Use a fixed-capacity array (e.g. `ListItem rows[MAX]`, as `OptionPopup` and `KOReaderSyncActivity`'s action rows do) when the count is small and bounded. Do not hold FUI `props` across renders — only the row storage they point into.
 
 ### Component inventory
 
@@ -33,106 +98,11 @@ All under `freeink-sdk/libs/ui/FreeInkUI/include/components/`:
 | Media | `book-card`, `cover-grid`, `cover-carousel`, `metric-card` |
 | Text | `text-field`, `text-area` |
 
-### Integration skeleton
-
-The in-tree reference is [`src/activities/util/KeyboardEntryActivity.cpp`](../../src/activities/util/KeyboardEntryActivity.cpp); it drives the FreeInkUI keyboard component inside a normal Activity. The shape:
-
-```cpp
-#include <FreeInkUIGfxRenderer.h>
-namespace fui = freeink::ui;
-
-// Render step: draw the component and (re)register its hit rects.
-fui::GfxRendererTarget target(renderer);           // adapts GfxRenderer to FreeInkUI's DrawTarget
-target.setFont(fui::GfxRendererTarget::FONT_BODY, UI_12_FONT_ID);
-const fui::DeviceContext device = target.deviceContext();  // orientation, safe area, touch sizing
-
-fui::Frame<48> frame(target, device, fui::InputSnapshot{}, interactions);  // 48 = max hit rects
-fui::KeyboardProps props;
-props.layout = &currentLayout();
-props.keyAction = ACTION_KEY;                      // one action id; the key is the event value
-props.inputMask = fui::InputTouch | fui::InputLongPress;
-fui::keyboard(frame, kbRect, props);               // draws AND registers hit rects
-```
-
-```cpp
-// Input step (each loop): feed touch state, act on routed events.
-int tx, ty, tapX, tapY, hx, hy;
-const bool pressedDown = mappedInput.wasScreenTouchDown(tx, ty);
-const bool tapped      = mappedInput.wasScreenTapped(tapX, tapY);
-const bool inContact   = mappedInput.isScreenTouchHeld(hx, hy);
-
-const auto result = touchRouter.update(interactions, pressedDown, tx, ty,
-                                       tapped, tapX, tapY, inContact, millis());
-if (result.event) {
-  activateValue(result.event.value, result.event.longPress);
-  requestUpdate();
-} else if (result.activeChanged) {
-  requestUpdate();  // repaint touch-down highlight
-}
-```
-
-Notes:
-
-- `Frame<N>` is templated on the max number of hit rects; the buffer is stack/static, no heap.
-- `fui::TouchHoldRouter` (see `components/keyboard/keyboard.h`) synthesizes long-press while the finger is still down and swallows the eventual release. Use it whenever a component distinguishes tap from long-press.
-- For simpler screens without long-press, `FreeInkApp` / `Screen<N>` (`FreeInkApp.h`) is the ergonomic layer: it owns the interaction buffer, offers a top-to-bottom builder (`takeTop`, footer helpers, etc.), and its `render(input)` call routes the snapshot and dispatches registered action callbacks in one step. `snapshotFrom(input, device)` in `FreeInkUIInputManager.h` builds the `InputSnapshot` with orientation-aware touch mapping.
-- Everything stays allocation-free and works on the button-only devices unchanged: physical buttons route through the same interaction table via each hit rect's `inputMask`.
+One exception to "always go through a host": `KeyboardEntryActivity` drives the keyboard component with a raw `fui::Frame` and `TouchHoldRouter` because per-key hold repeat needs its own routing. If you think your screen needs that, raise it in the PR first.
 
 ---
 
-## Path 2: Adding touch to existing hand-rolled screens
-
-For activities that draw their own rows, menus, and buttons, `MappedInputManager` ([src/MappedInputManager.h](../../src/MappedInputManager.h)) exposes bridge helpers. They all return **logical screen coordinates** (orientation already applied via `GfxRenderer::tapToLogical`); never touch raw normalized panel coordinates or the SDK `InputManager` directly.
-
-| Helper | Use for |
-|---|---|
-| `wasScreenTapped(x, y)` | A completed tap (press + release), with logical coords |
-| `wasScreenTouchDown(x, y)` | Touch-down (held > 90 ms, not yet released): draw selection highlight |
-| `isScreenTouchHeld(x, y)` | Live contact position while the finger is down (drag tracking) |
-| `wasTapInRect(x, y, w, h)` | One-off hit test on a rectangle (a single button, a banner) |
-| `wasListItemTapped(index, count, selected, listTop, listHeight, hasSubtitle)` | Taps on a standard UITheme list; does the row/paging math for you |
-| `wasListItemTouchedDown(...)` | Same geometry, touch-down phase (highlight before activate) |
-| `rowTouch(row, top, rowStep, rowCount, xStart, xEnd, rowHeight)` | Any custom band of equal-height rows; returns `RowTouch::None/Down/Tap` |
-| `colTouch(col, left, colStep, colCount, yStart, yEnd, colWidth)` | Horizontal button bands (dialogs, prompts) |
-| `wasSwipe()` | Raw swipe direction if you need one beyond the global gestures |
-| `hasTouch()` | True when the device has a touch panel (rarely needed; helpers simply never fire without one) |
-
-### Pattern A: standard themed list
-
-One call per loop; UITheme owns the row geometry ([EpubReaderBookmarksActivity.cpp:123](../../src/activities/reader/EpubReaderBookmarksActivity.cpp)):
-
-```cpp
-int tapped = -1;
-if (mappedInput.wasListItemTapped(tapped, bookmarks.size(), selectorIndex, listY, listHeight, true)) {
-  selectorIndex = tapped;
-  openBookmark();
-  return;
-}
-```
-
-### Pattern B: custom rows with hold highlight
-
-For non-theme row layouts, use `rowTouch` and distinguish `Down` (highlight) from `Tap` (activate), as in [EpubReaderFootnotesActivity.cpp](../../src/activities/reader/EpubReaderFootnotesActivity.cpp):
-
-```cpp
-int row = -1;
-const auto touch = mappedInput.rowTouch(row, listTop, lineHeight, visibleCount,
-                                        contentX, contentX + contentWidth);
-if (touch != MappedInputManager::RowTouch::None) {
-  const int touched = scrollOffset + row;
-  if (touch == MappedInputManager::RowTouch::Down) {
-    if (selectedIndex != touched) { selectedIndex = touched; requestUpdate(); }
-  } else {  // RowTouch::Tap
-    selectedIndex = touched;
-    activateSelection();
-  }
-  return;
-}
-```
-
-The `Down` state exists because e-ink repaints are slow: highlight on touch-down gives immediate feedback, activation happens on release.
-
-### Global gestures: do not reimplement these
+## Global gestures: do not reimplement these
 
 Three gestures are handled once, for every screen. Activities must not add their own edge-swipe handling:
 
@@ -142,14 +112,25 @@ Three gestures are handled once, for every screen. Activities must not add their
 | Home | Up-swipe starting in the bottom 14% | `ActivityManager::loop()`; pops to Home (activities can override via `handleHomeGesture()`) |
 | Menu | Down-swipe starting in the top 14% | Activities that have a menu check `wasMenuGesture()` themselves (the reader does this) |
 
-Because the back gesture arrives as `Button::Back`, most button-era activities gain back-swipe support with zero changes. That is the bar to aim for: bridge helpers should make touch an additive layer over the button flow, not a second input state machine.
+Because the back gesture arrives as `Button::Back`, most button-era activities gain back-swipe support with zero changes.
 
-### Bridge rules
+---
 
-- Handle touch in `loop()` next to the existing button handling, one helper call per interaction zone, and `return` after consuming an event (mirrors the button pattern).
-- Never call the SDK `InputManager` or read GPIO directly; the HAL rule from the main guide applies to touch too.
-- Coordinates from the helpers are logical and orientation-correct on all four rotations; test at least Portrait and one Landscape mode before PR.
-- Nothing to clean up in `onExit()`; the helpers are stateless from the activity's point of view.
+## Legacy bridge helpers (do not use in new code)
+
+`MappedInputManager` still exposes raw touch accessors. The FUI stack consumes them internally (via `touchSnapshotFrom` in [`UiAppHelpers.h`](../../src/components/UiAppHelpers.h)); activities should not.
+
+| Helper | Status |
+|---|---|
+| `wasScreenTapped` / `wasScreenTouchDown` / `isScreenTouchHeld` | Consumed by the FUI snapshot builder. Direct use only in the two legacy surfaces |
+| `wasTapInRect(x, y, w, h)` | Legacy one-off hit test |
+| `rowTouch` / `colTouch` | Legacy row/column band math. Sole remaining user: `HomeActivity` (theme-driven layout) |
+| `wasSwipe()` | Raw swipe direction, for behavior beyond the global gestures (reader page turns) |
+| `hasTouch()` | Still fine anywhere: gate touch-only chrome (on-screen Cancel/OK pairs) on it |
+
+The `wasListItemTapped` / `wasListItemTouchedDown` helpers from the button-era bridge have been removed; every themed list is a `UiListActivity` now. If you are porting a branch that still calls them, convert the screen to `UiListActivity` rather than resurrecting the helpers.
+
+As with all input: never call the SDK `InputManager` or read GPIO directly. The HAL rule from the main guide applies to touch too.
 
 ---
 

docs/dictionary.md

@@ -13,7 +13,7 @@ A dictionary folder must contain:
 - `.syn` — synonym index (optional; maps alternate spellings and irregular forms to their headword)
 - `.ifo` — metadata (optional)
 
-Not supported: dictionaries with 64-bit index offsets (`idxoffsetbits=64` in the `.ifo` — rare, and rejected with an error), and HTML-formatted definitions render as raw markup rather than styled text.
+Not supported: dictionaries with 64-bit index offsets (`idxoffsetbits=64` in the `.ifo` — rare, and rejected with an error).
 
 ## Setting Up a Dictionary
 
@@ -49,6 +49,8 @@ On the very first lookup with a dictionary (and again whenever the `.idx` or `.s
 
 When a word is found, the definition screen shows the matched headword at the top and the definition text below, with a page counter for long definitions.
 
+HTML dictionaries that declare `sametypesequence=h` use the EPUB text-layout engine for semantic formatting such as headings, bold, italics, lists, and line breaks. Images and CSS styling are ignored. Definitions that are too large or cannot be laid out within the available memory fall back to plain text.
+
 - **Left/Right** or side **Up/Down** — previous / next page
 - **Back** — return to word selection
 

lib/Epub/Epub/Section.cpp

@@ -33,10 +33,7 @@ namespace {
 // v35: Persist a uint32_t visible-text start offset for every page.
 // v36: Ruby and CJK justification layout changes invalidate cached word positions.
 // v37: Footnote href records grew from 96 to 256 bytes.
-// v38: Image top margin is clamped so a full-viewport-height image cannot
-//      overflow the page bottom; older caches can hold placements that panels
-//      with no bottom inset refuse to draw.
-constexpr uint8_t SECTION_FILE_VERSION = 38;
+constexpr uint8_t SECTION_FILE_VERSION = 37;
 // Written into the version field while a build is in progress; patched to
 // SECTION_FILE_VERSION only when the build is finalized. An abandoned /
 // crash-interrupted .bin therefore carries version 0, which loadSectionFile rejects

lib/Epub/Epub/converters/ImageToFramebufferDecoder.cpp

@@ -1,28 +1,16 @@
 #include "ImageToFramebufferDecoder.h"
 
-#include <Arduino.h>
 #include <Logging.h>
 
 bool ImageToFramebufferDecoder::validateImageDimensions(int width, int height, const std::string& format) {
-  // 64-bit multiply: a malformed header (e.g. 40000x60000) overflows a plain
-  // int product before the comparison can reject it.
-  const int64_t pixels = static_cast<int64_t>(width) * static_cast<int64_t>(height);
-  if (pixels > MAX_SOURCE_PIXELS) {
-    LOG_ERR("IMG", "Image too large (%dx%d = %lld pixels %s), max supported: %lld pixels", width, height,
-            static_cast<long long>(pixels), format.c_str(), static_cast<long long>(MAX_SOURCE_PIXELS));
+  if (width * height > MAX_SOURCE_PIXELS) {
+    LOG_ERR("IMG", "Image too large (%dx%d = %d pixels %s), max supported: %d pixels", width, height, width * height,
+            format.c_str(), MAX_SOURCE_PIXELS);
     return false;
   }
   return true;
 }
 
-void ImageToFramebufferDecoder::yieldDuringDecode(uint32_t& lastYieldMs) {
-  const uint32_t now = millis();
-  if (now - lastYieldMs >= 250) {
-    lastYieldMs = now;
-    vTaskDelay(1);
-  }
-}
-
 void ImageToFramebufferDecoder::warnUnsupportedFeature(const std::string& feature, const std::string& imagePath) {
   LOG_ERR("IMG", "Warning: Unsupported feature '%s' in image '%s'. Image may not display correctly.", feature.c_str(),
           imagePath.c_str());

lib/Epub/Epub/converters/ImageToFramebufferDecoder.h

@@ -31,21 +31,9 @@ class ImageToFramebufferDecoder {
 
   virtual const char* getFormatName() const = 0;
 
-  // Call from per-row/per-MCU decode callbacks (free functions, hence public):
-  // yields one tick at most every 250 ms so multi-second decodes keep the idle
-  // task (and its watchdog) fed. `lastYieldMs` is caller-held state,
-  // initialized to the decode start time.
-  static void yieldDuringDecode(uint32_t& lastYieldMs);
-
  protected:
-  // Size validation helpers. The cap bounds decode TIME, not memory: both decoders
-  // stream (JPEG in MCU bands at 1/2..1/8 coarse scale, PNG scanline-by-scanline
-  // with its own width-based row-buffer guard), so RAM never scales with source
-  // area. 8 MP admits real-world ebook covers (KDP recommends 1600x2560 and
-  // 2000x3000) while keeping a worst-case single decode in single-digit seconds;
-  // the row callbacks yield periodically so a long decode cannot starve the idle
-  // task's watchdog.
-  static constexpr int64_t MAX_SOURCE_PIXELS = 8388608;  // 8 MP (e.g. 2048 * 4096)
+  // Size validation helpers
+  static constexpr int MAX_SOURCE_PIXELS = 3145728;  // 2048 * 1536
 
   bool validateImageDimensions(int width, int height, const std::string& format);
   void warnUnsupportedFeature(const std::string& feature, const std::string& imagePath);

lib/Epub/Epub/converters/JpegToFramebufferConverter.cpp

@@ -46,8 +46,6 @@ struct JpegContext {
 
   PixelCache cache;
   bool caching{false};
-
-  uint32_t lastYieldMs{0};  // throttle state for yieldDuringDecode()
 };
 
 // File I/O callbacks use pFile->fHandle to access the HalFile*,
@@ -124,8 +122,6 @@ int jpegDrawCallback(JPEGDRAW* pDraw) {
   JpegContext* ctx = reinterpret_cast<JpegContext*>(pDraw->pUser);
   if (!ctx || !ctx->config || !ctx->renderer) return 0;
 
-  ImageToFramebufferDecoder::yieldDuringDecode(ctx->lastYieldMs);
-
   // In EIGHT_BIT_GRAYSCALE mode, pPixels contains 8-bit grayscale values
   // Buffer is densely packed: stride = pDraw->iWidth, valid columns = pDraw->iWidthUsed
   uint8_t* pixels = reinterpret_cast<uint8_t*>(pDraw->pPixels);
@@ -498,7 +494,6 @@ bool JpegToFramebufferConverter::decodeToFramebuffer(const std::string& imagePat
   }
 
   unsigned long decodeStart = millis();
-  ctx.lastYieldMs = decodeStart;
   rc = jpeg->decode(0, 0, jpegScaleOption);
   unsigned long decodeTime = millis() - decodeStart;
 

lib/Epub/Epub/converters/PngToFramebufferConverter.cpp

@@ -38,8 +38,6 @@ struct PngContext {
   bool caching{false};
 
   uint8_t* grayLineBuffer{nullptr};
-
-  uint32_t lastYieldMs{0};  // throttle state for yieldDuringDecode()
 };
 
 // File I/O callbacks use pFile->fHandle to access the HalFile*,
@@ -208,8 +206,6 @@ int pngDrawCallback(PNGDRAW* pDraw) {
   PngContext* ctx = reinterpret_cast<PngContext*>(pDraw->pUser);
   if (!ctx || !ctx->config || !ctx->renderer || !ctx->grayLineBuffer) return 0;
 
-  ImageToFramebufferDecoder::yieldDuringDecode(ctx->lastYieldMs);
-
   int srcY = pDraw->y;
   int srcWidth = ctx->srcWidth;
 
@@ -436,7 +432,6 @@ bool PngToFramebufferConverter::decodeToFramebuffer(const std::string& imagePath
   }
 
   unsigned long decodeStart = millis();
-  ctx.lastYieldMs = decodeStart;
   rc = png->decode(&ctx, 0);
   unsigned long decodeTime = millis() - decodeStart;
 

lib/Epub/Epub/parsers/ChapterHtmlSlimParser.cpp

@@ -793,18 +793,7 @@ void XMLCALL ChapterHtmlSlimParser::startElement(void* userData, const XML_Char*
                   self->currentPageVisibleOffsetSet = false;
                 }
 
-                // Apply top margin from container block. Clamp it so the image never
-                // overflows the page bottom: a full-viewport-height image leaves no room
-                // for the margin, and the break above only fires on non-empty pages, so a
-                // fresh page would otherwise place the image at y=marginTop and run
-                // marginTop pixels past viewportHeight. A large bottom reserve (status
-                // bar / big screen margin) absorbs that overflow silently, but with a
-                // thin reserve it crosses the physical screen edge and fails
-                // ImageBlock::render's bounds check, dropping the image entirely.
-                if (self->currentPageNextY + imageMarginTop + displayHeight > self->viewportHeight) {
-                  const int room = self->viewportHeight - displayHeight - self->currentPageNextY;
-                  imageMarginTop = static_cast<int16_t>(room > 0 ? room : 0);
-                }
+                // Apply top margin from container block
                 self->currentPageNextY += imageMarginTop;
 
                 // Create ImageBlock and add to page

lib/GfxRenderer/GfxRenderer.cpp

@@ -727,11 +727,14 @@ void GfxRenderer::drawRect(const int x, const int y, const int width, const int
 // Border is inside the rectangle
 void GfxRenderer::drawRect(const int x, const int y, const int width, const int height, const int lineWidth,
                            const bool state) const {
+  // Keep the border inside [x, x+width) like the thin overload: the previous
+  // right/bottom edges at x+width / y+height sat one pixel outside the rect,
+  // so stroked boxes looked shifted against fills computed from the rect.
   for (int i = 0; i < lineWidth; i++) {
-    drawLine(x + i, y + i, x + width - i, y + i, state);
-    drawLine(x + width - i, y + i, x + width - i, y + height - i, state);
-    drawLine(x + width - i, y + height - i, x + i, y + height - i, state);
-    drawLine(x + i, y + height - i, x + i, y + i, state);
+    drawLine(x + i, y + i, x + width - 1 - i, y + i, state);
+    drawLine(x + width - 1 - i, y + i, x + width - 1 - i, y + height - 1 - i, state);
+    drawLine(x + width - 1 - i, y + height - 1 - i, x + i, y + height - 1 - i, state);
+    drawLine(x + i, y + height - 1 - i, x + i, y + i, state);
   }
 }
 

lib/I18n/translations/bulgarian.yaml

@@ -0,0 +1,431 @@
+_language_name: "Български"
+_language_code: "BG"
+_order: "31"
+
+STR_CROSSPOINT: "CrossPoint"
+STR_BOOTING: "ЗАРЕЖДАНЕ"
+STR_SLEEPING: "СПЯЩ РЕЖИМ"
+STR_ENTERING_SLEEP: "Преминаване в спящ режим"
+STR_BROWSE_FILES: "Разглеждане на файлове"
+STR_FILE_TRANSFER: "Прехвърляне на файлове"
+STR_SETTINGS_TITLE: "Настройки"
+STR_CONTINUE_READING: "Продължи четенето"
+STR_RESUME: "Продължи"
+STR_NO_OPEN_BOOK: "Няма отворена книга"
+STR_START_READING: "Започни четене по-долу"
+STR_NO_FILES_FOUND: "Не са намерени файлове"
+STR_SELECT_CHAPTER: "Избери глава"
+STR_NO_CHAPTERS: "Няма глави"
+STR_END_OF_BOOK: "Край на книгата"
+STR_EMPTY_CHAPTER: "Празна глава"
+STR_INDEXING: "Индексиране"
+STR_INDEX_FAILED: "Неуспешно индексиране - невалидна книга"
+STR_MEMORY_ERROR: "Грешка в паметта"
+STR_PAGE_LOAD_ERROR: "Грешка при зареждане на страницата"
+STR_EMPTY_FILE: "Празен файл"
+STR_INVALID_BMP_FILE: "Невалиден BMP файл"
+STR_FILE_OPEN_FAILED: "Файлът не може да бъде отворен"
+STR_OUT_OF_BOUNDS: "Извън обхвата"
+STR_LOADING: "Зареждане..."
+STR_LOADING_POPUP: "Зареждане"
+STR_LOOKUP: "Търсене"
+STR_DICT_LOOKING_UP: "Търсене..."
+STR_DICT_INDEXING: "Индексиране на речника..."
+STR_DICT_NOT_FOUND: "Не е намерено"
+STR_DICT_NO_DICT_SET: "Не е зададен речник"
+STR_DICT_ERROR: "Грешка в речника"
+STR_DICT_READ_FAILED: "Определението не може да бъде прочетено"
+STR_DICT_DECOMPRESS_ERROR: "Определението не може да бъде декомпресирано"
+STR_DICT_LOW_MEMORY: "Недостатъчна памет"
+STR_WIFI_NETWORKS: "Wi-Fi мрежи"
+STR_NO_NETWORKS: "Не са намерени мрежи"
+STR_NETWORKS_FOUND: "Намерени мрежи: %zu"
+STR_SCANNING: "Сканиране..."
+STR_FINDING_SAVED_WIFI: "Търсене на запазен Wi-Fi..."
+STR_CONNECTING: "Свързване..."
+STR_CONNECTING_SAVED_WIFI: "Свързване към запазен Wi-Fi..."
+STR_SHOW_NETWORKS: "Покажи"
+STR_CONNECTED: "Свързан!"
+STR_CONNECTION_FAILED: "Неуспешна връзка"
+STR_FORGET_NETWORK: "Забравяне на мрежата?"
+STR_SAVE_PASSWORD: "Запазване на паролата за следващия път?"
+STR_PRESS_OK_SCAN: "Натисни OK за ново сканиране"
+STR_JOIN_NETWORK: "Присъединяване към мрежа"
+STR_CREATE_HOTSPOT: "Създаване на hotspot"
+STR_JOIN_DESC: "Свързване към съществуваща Wi-Fi мрежа"
+STR_HOTSPOT_DESC: "Създаване на Wi-Fi мрежа, за други устройства"
+STR_STARTING_HOTSPOT: "Стартиране на hotspot..."
+STR_HOTSPOT_MODE: "Режим на hotspot"
+STR_CONNECT_WIFI_HINT: "Свържи устройството си към Wi-Fi мрежа"
+STR_OPEN_URL_HINT: "Отвори този URL адрес в браузъра си"
+STR_OR_HTTP_PREFIX: "или http://"
+STR_SCAN_QR_HINT: "или сканирай QR кода с телефона си:"
+STR_CALIBRE_WIRELESS: "Calibre безжично"
+STR_NETWORK_LEGEND: "* = Криптирана | + = Запазена"
+STR_MAC_ADDRESS: "MAC адрес:"
+STR_CHECKING_WIFI: "Проверка на Wi-Fi..."
+STR_ENTER_WIFI_PASSWORD: "Въведи Wi-Fi парола"
+STR_ADD_HIDDEN_NETWORK: "Добави скрита мрежа..."
+STR_ENTER_WIFI_SSID: "Въведи име на мрежата (SSID)"
+STR_TO_PREFIX: "към "
+STR_CALIBRE_RECEIVING: "Получаване: "
+STR_CALIBRE_RECEIVED: "Получено: "
+STR_CALIBRE_INSTRUCTION_1: "1) Инсталирай плъгина CrossPoint Reader"
+STR_CALIBRE_INSTRUCTION_2: "2) Бъди в същата Wi-Fi мрежа"
+STR_CALIBRE_INSTRUCTION_3: "3) В Calibre: \"Изпрати към устройство\""
+STR_CALIBRE_INSTRUCTION_4: "\"Дръж този екран отворен по време на изпращане\""
+STR_CAT_DISPLAY: "Екран"
+STR_CAT_READER: "Четец"
+STR_CAT_CONTROLS: "Контрол"
+STR_CAT_SYSTEM: "Система"
+STR_SLEEP_SCREEN: "Екран при спящ режим"
+STR_QUICK_RESUME_TIMEOUT: "Бързо продълж. при неактивност"
+STR_SLEEP_COVER_MODE: "Мащабиране на спящ екран"
+STR_HIDE_BATTERY: "Скрий % на батерията"
+STR_EXTRA_SPACING: "Доп. интервал между абзаци"
+STR_TEXT_AA: "Изглаждане на текста"
+STR_IMAGES: "Изображения"
+STR_IMAGES_DISPLAY: "Показване"
+STR_IMAGES_PLACEHOLDER: "Празен слот"
+STR_IMAGES_SUPPRESS: "Скриване"
+STR_EOB_HOME: "Начало"
+STR_EOB_CONTINUE_WITH: "Продължи с"
+STR_SHORT_PWR_BTN: "Натиск. бутона за захранване"
+STR_ORIENTATION: "Ориентация на четене"
+STR_SIDE_BTN_LAYOUT: "Странични бутони"
+STR_TOUCH_READER_CONTROLS: "Сензорно управление на четеца"
+STR_FRONT_BTN_FOLLOW_ORIENTATION: "Ориентация на предните бутони"
+STR_LONG_PRESS_BEHAVIOR: "Задържане на преден бутон"
+STR_LONG_PRESS_BEHAVIOR_OFF: "ИЗКЛ."
+STR_LONG_PRESS_BEHAVIOR_SKIP: "Пропускане на глава"
+STR_LONG_PRESS_BEHAVIOR_ORIENTATION: "Промяна на ориентацията"
+STR_LONG_PRESS_MENU: "Задържане на меню бутон"
+STR_FONT_PREVIEW_TEXT: "Под южно дърво, цъфтящо в синьо, бягаше малко пухкаво зайче."
+STR_FONT_FAMILY: "Шрифт на четеца"
+STR_FONT_SIZE: "Размер на шрифта на четеца"
+STR_TEXT_SETTINGS: "Настройки на текста"
+STR_FONT: "Шрифт"
+STR_SIZE: "Размер"
+STR_LAYOUT: "Изглед"
+STR_ALIGNMENT: "Подравняване"
+STR_STYLE: "Стил"
+STR_NOT_IN_PREVIEW: "Не се показва в предварителния преглед"
+STR_LINE_SPACING: "Интервал между редовете"
+STR_SCREEN_MARGIN: "Отстъпи на екрана"
+STR_PARA_ALIGNMENT: "Подравняване на абзаца"
+STR_HYPHENATION: "Разделяне на срички"
+STR_TIME_TO_SLEEP: "Време до заспиване"
+STR_SHOW_HIDDEN_FILES: "Показване на скритите файлове"
+STR_REMOVE_READ_FROM_RECENTS: "Махни прочетените от скорошни"
+STR_MOVE_FINISHED_TO_READ: "Измести завършените в папка read"
+STR_REFRESH_FREQ: "Честота на опресняване"
+STR_KOREADER_SYNC: "KOReader синхронизация"
+STR_CHECK_UPDATES: "Проверка за актуализации"
+STR_LANGUAGE: "Език"
+STR_CLEAR_READING_CACHE: "Изчисти кеша на четенето"
+STR_USERNAME: "Потребителско име"
+STR_PASSWORD: "Парола"
+STR_SYNC_SERVER_URL: "URL адрес на сървъра за синхронизация"
+STR_DOCUMENT_MATCHING: "Съпоставяне на документи"
+STR_SEND_METADATA: "Изпращане на метаданни на документа"
+STR_SYNC_BEHAVIOR: "Поведение при синхронизация"
+STR_ASK_EVERY_TIME: "Питай всеки път"
+STR_SMART_SYNC: "Умна синхронизация"
+STR_AUTHENTICATE: "Удостовери се"
+STR_SIGN_UP: "Регистрация"
+STR_CREATING_ACCOUNT: "Създаване на профил..."
+STR_ACCOUNT_CREATED: "Профилът е създаден"
+STR_SIGNUP_FAILED: "Неуспешна регистрация"
+STR_USERNAME_TAKEN: "Потребителското име вече е регистрирано"
+STR_KOREADER_USERNAME: "KOReader потребителско име"
+STR_KOREADER_PASSWORD: "KOReader парола"
+STR_FILENAME: "Име на файла"
+STR_BINARY: "Двоичен"
+STR_SET_CREDENTIALS_FIRST: "Първо задай данни за вход"
+STR_WIFI_CONN_FAILED: "Неуспешна Wi-Fi връзка"
+STR_AUTHENTICATING: "Удостоверяване..."
+STR_AUTH_SUCCESS: "Успешно удостоверяване!"
+STR_KOREADER_AUTH: "KOReader удостоверяване"
+STR_SYNC_READY: "KOReader синхронизацията е готова за използване"
+STR_AUTH_FAILED: "Неуспешно удостоверяване"
+STR_DONE: "Готово"
+STR_CLEAR_CACHE_WARNING_1: "Това ще изчисти всички кеширани данни за книгите."
+STR_CLEAR_CACHE_WARNING_2: "Целият прогрес на четенето ще бъде загубен!"
+STR_CLEAR_CACHE_WARNING_3: "Книгите ще трябва да бъдат преиндексирани"
+STR_CLEAR_CACHE_WARNING_4: "при следващо отваряне."
+STR_CLEARING_CACHE: "Изчистване на кеша..."
+STR_CACHE_CLEARED: "Кешът е изчистен"
+STR_ITEMS_REMOVED: "премахнати елемента"
+STR_FAILED_LOWER: "неуспешно"
+STR_CLEAR_CACHE_FAILED: "Неуспешно изчистване на кеша"
+STR_CHECK_SERIAL_OUTPUT: "Провери серийния изход за подробности"
+STR_DARK: "Тъмен"
+STR_LIGHT: "Светъл"
+STR_CUSTOM: "Персонализиран"
+STR_COVER: "Корица"
+STR_NONE_OPT: "Няма"
+STR_FIT: "Побиране"
+STR_CROP: "Изрязване"
+STR_NEVER: "Никога"
+STR_IN_READER: "В четеца"
+STR_ALWAYS: "Винаги"
+STR_IGNORE: "Игнорирай"
+STR_SLEEP: "Спящ режим"
+STR_PAGE_TURN: "Обръщане на страница"
+STR_FORCE_REFRESH: "Опресни екрана"
+STR_PORTRAIT: "Портрет"
+STR_LANDSCAPE_CW: "Пейзаж (по часовниковата стрелка)"
+STR_INVERTED: "Обърнато"
+STR_ORIENTATION_INVERTED: "Портрет 180°"
+STR_LANDSCAPE_CCW: "Пейзаж (срещу часовниковата стрелка)"
+STR_PREV_NEXT: "Предишен/Следващ"
+STR_NEXT_PREV: "Следващ/Предишен"
+STR_KOSYNC: "KOSync"
+STR_BOOKMARK_OPTION: "Отметка"
+STR_DICTIONARY: "Речник"
+STR_DISABLED: "Изключено"
+STR_NOTO_SERIF: "Noto Serif"
+STR_NOTO_SANS: "Noto Sans"
+STR_TIGHT: "Тесен"
+STR_NORMAL: "Нормален"
+STR_WIDE: "Широк"
+STR_JUSTIFY: "Двустранно"
+STR_ALIGN_LEFT: "Ляво"
+STR_CENTER: "Центрирано"
+STR_ALIGN_RIGHT: "Дясно"
+STR_PAGES_1: "1 страница"
+STR_PAGES_5: "5 страници"
+STR_PAGES_10: "10 страници"
+STR_PAGES_15: "15 страници"
+STR_PAGES_30: "30 страници"
+STR_UPDATE: "Актуализация"
+STR_CHECKING_UPDATE: "Проверка за актуализация..."
+STR_NEW_UPDATE: "Налична е нова актуализация!"
+STR_CURRENT_VERSION: "Текуща версия: "
+STR_NEW_VERSION: "Нова версия: "
+STR_UPDATING: "Актуализиране..."
+STR_NO_UPDATE: "Няма налична актуализация"
+STR_UPDATE_FAILED: "Неуспешна актуализация"
+STR_UPDATE_COMPLETE: "Актуализацията завърши"
+STR_POWER_ON_HINT: "Натисни и задръж бутона за захранване за включване"
+STR_RESTARTING_HINT: "Рестартиране... Ако устройството не се рестартира, задръж бутона за захранване за няколко секунди."
+STR_NO_ENTRIES: "Не са намерени записи"
+STR_DOWNLOADING: "Изтегляне..."
+STR_DOWNLOAD_FAILED: "Неуспешно изтегляне"
+STR_ERROR_MSG: "Грешка:"
+STR_UNNAMED: "Без име"
+STR_HOLD_OPEN_TO_DELETE: "Задръж отворено за изтриване"
+STR_NO_SERVER_URL: "Не е зададен URL адрес на сървъра"
+STR_FETCH_FEED_FAILED: "Неуспешно извличане на емисията"
+STR_PARSE_FEED_FAILED: "Неуспешен анализ на емисията"
+STR_NEXT_PAGE: "Следваща страница »"
+STR_PREV_PAGE: "« Предишна страница"
+STR_NETWORK_PREFIX: "Мрежа: "
+STR_IP_ADDRESS_PREFIX: "IP адрес: "
+STR_ERROR_GENERAL_FAILURE: "Грешка: Обща неуспешна операция"
+STR_ERROR_NETWORK_NOT_FOUND: "Грешка: Мрежата не е намерена"
+STR_ERROR_CONNECTION_TIMEOUT: "Грешка: Изтекло време за връзка"
+STR_SD_CARD: "SD карта"
+STR_BACK: "« Назад"
+STR_EXIT: "« Изход"
+STR_HOME: "« Начало"
+STR_SELECT: "Избери"
+STR_SELECTED: "Избрано"
+STR_TOGGLE: "Избор"
+STR_TOGGLE_BOOKMARK: "Превключи отметка"
+STR_CONFIRM: "Потвърди"
+STR_CANCEL: "Отказ"
+STR_CONNECT: "Свържи"
+STR_OPEN: "Отвори"
+STR_DOWNLOAD: "Изтегли"
+STR_RETRY: "Повтори"
+STR_TAP_TO_RETRY: "Докосни за нов опит"
+STR_YES: "Да"
+STR_NO: "Не"
+STR_SHOW: "Покажи"
+STR_HIDE: "Скрий"
+STR_STATE_ON: "ВКЛ."
+STR_STATE_OFF: "ИЗКЛ."
+STR_NOT_SET: "Незададено"
+STR_DIR_LEFT: "Ляво"
+STR_DIR_RIGHT: "Дясно"
+STR_DIR_UP: "Нагоре"
+STR_DIR_DOWN: "Надолу"
+STR_OK_BUTTON: "OK"
+STR_KEY_SHIFT: "Shift"
+STR_KEY_MODE_SYMBOLS: "?123"
+STR_KEY_MODE_ABC: "abc"
+STR_SLEEP_COVER_FILTER: "Филтър корица на спящ екран"
+STR_FILTER_CONTRAST: "Контраст"
+STR_CUSTOMISE_STATUS_BAR: "Персонализирай лентата на състоянието"
+STR_CHAPTER_PAGE_COUNT: "Брой страници на главата"
+STR_BOOK_PROGRESS_PERCENTAGE: "Процент прогрес на книгата"
+STR_PROGRESS_BAR: "Лента за прогрес"
+STR_PROGRESS_BAR_THICKNESS: "Дебелина на лентата за прогрес"
+STR_PROGRESS_BAR_THIN: "Тънка"
+STR_PROGRESS_BAR_MEDIUM: "Средна"
+STR_PROGRESS_BAR_THICK: "Дебела"
+STR_BOOK: "Книга"
+STR_CHAPTER: "Глава"
+STR_EXAMPLE_CHAPTER: "Глава 21"
+STR_EXAMPLE_BOOK: "Заглавие на книгата"
+STR_PREVIEW: "Преглед"
+STR_TITLE: "Заглавие"
+STR_BATTERY: "Батерия"
+STR_XTC_STATUS_BAR: "XTC лента на състоянието"
+STR_BOTTOM: "Долу"
+STR_TOP: "Горе"
+STR_CLOCK: "Часовник"
+STR_CLOCK_UTC_OFFSET: "UTC отместване на часовника"
+STR_CLOCK_FORMAT: "Формат на часовника"
+STR_CLOCK_FORMAT_24H: "24-часов"
+STR_CLOCK_FORMAT_12H: "12-часов"
+STR_CURRENT_TIME: "Текущо време:"
+STR_NEXT_FIELD: "Следващо"
+STR_CLOCK_SYNC: "Синхронизирай часовника"
+STR_CLOCK_SYNC_NOW: "Синхронизирай часовника сега"
+STR_CLOCK_SYNCING: "Синхронизиране от NTP..."
+STR_CLOCK_SYNC_OK: "Часовникът е синхронизиран"
+STR_CLOCK_SYNC_FAIL: "Неуспешна синхронизация"
+STR_CLOCK_SYNC_NO_WIFI: "Wi-Fi не е свързан"
+STR_CLOCK_SYNC_NO_WIFI_HINT: "Свържи се с Wi-Fi и опитай отново."
+STR_CLOCK_SYNCED: "Часовникът е синхронизиран"
+STR_UI_THEME: "Тема на интерфейса"
+STR_THEME_CLASSIC: "Класическа"
+STR_THEME_LYRA: "Lyra"
+STR_THEME_ROUNDEDRAFF: "RoundedRaff"
+STR_THEME_LYRA_EXTENDED: "Lyra Extended"
+STR_SUNLIGHT_FADING_FIX: "Защита от избледняване при слънце"
+STR_REMAP_FRONT_BUTTONS: "Преназначаване на предните бутони"
+STR_BOOKMARKS: "Отметки"
+STR_BOOKMARK_ADDED: "Отметката е добавена."
+STR_BOOKMARK_REMOVED: "Отметката е премахната."
+STR_OPDS_BROWSER: "OPDS браузър"
+STR_SEARCH: "Търсене"
+STR_COVER_CUSTOM: "Корица + Персонализиран"
+STR_QUICK_RESUME: "Бързо продължаване"
+STR_MENU_RECENT_BOOKS: "Скорошни книги"
+STR_REMOVE_FROM_RECENTS: "Премахване от скорошните книги?"
+STR_NO_RECENT_BOOKS: "Няма скорошни книги"
+STR_CALIBRE_DESC: "Използвай безжично прехвърляне през Calibre"
+STR_FORGET_AND_REMOVE: "Забравяне на мрежата и премахване на запазената парола?"
+STR_FORGET_BUTTON: "Забрави"
+STR_CALIBRE_STARTING: "Стартиране на Calibre..."
+STR_CALIBRE_SETUP: "Настройка"
+STR_CALIBRE_STATUS: "Състояние"
+STR_CLEAR_BUTTON: "Изчисти"
+STR_DEFAULT_VALUE: "По подразбиране"
+STR_REMAP_PROMPT: "Натисни предния бутон за всяка роля"
+STR_UNASSIGNED: "Незададено"
+STR_ALREADY_ASSIGNED: "Вече е зададено"
+STR_REMAP_RESET_HINT: "Страничен бутон Нагоре: Рестарт на настройки"
+STR_REMAP_CANCEL_HINT: "Страничен бутон Надолу: Отказ от преназначаване"
+STR_HW_BACK_LABEL: "Назад (1-ви бутон)"
+STR_HW_CONFIRM_LABEL: "Потвърди (2-ри бутон)"
+STR_HW_LEFT_LABEL: "Ляво (3-ти бутон)"
+STR_HW_RIGHT_LABEL: "Дясно (4-ти бутон)"
+STR_GO_TO_PERCENT: "Отиди на %"
+STR_GO_HOME_BUTTON: "Начало"
+STR_SYNC_PROGRESS: "Синхронизирай прогреса"
+STR_DELETE_CACHE: "Изтрий кеша на книгата"
+STR_DELETE: "Изтрий"
+STR_CONFIRM_DELETE_BOOKMARK: "Изтриване на тази отметка?"
+STR_DISPLAY_QR: "Покажи страницата като QR код"
+STR_CHAPTER_PREFIX: "Глава: "
+STR_PAGES_SEPARATOR: " страници  |  "
+STR_BOOK_PREFIX: "Книга: "
+STR_CALIBRE_URL_HINT: "За Calibre добави /opds към твоя URL адрес"
+STR_SYNCING_TIME: "Синхронизиране на времето..."
+STR_CALC_HASH: "Изчисляване на хеш на документа..."
+STR_HASH_FAILED: "Неуспешно изчисляване на хеша на документа"
+STR_FETCH_PROGRESS: "Извличане на прогреса от сървъра..."
+STR_UPLOAD_PROGRESS: "Качване на прогреса..."
+STR_NO_CREDENTIALS_MSG: "Не са зададени данни за вход"
+STR_KOREADER_SETUP_HINT: "Настрой KOReader профил в Настройки"
+STR_PROGRESS_FOUND: "Прогресът е намерен!"
+STR_REMOTE_LABEL: "От сървъра:"
+STR_LOCAL_LABEL: "Локален:"
+STR_PAGE_OVERALL_FORMAT: "Страница %d, %.2f%% общо"
+STR_PAGE_TOTAL_OVERALL_FORMAT: "Страница %d/%d, %.2f%% общо"
+STR_DEVICE_FROM_FORMAT: "  От: %s"
+STR_APPLY_REMOTE: "Приложи прогреса от сървъра"
+STR_UPLOAD_LOCAL: "Качи локалния прогрес"
+STR_NO_REMOTE_MSG: "Не е намерен прогрес на сървъра"
+STR_UPLOAD_PROMPT: "Качване на текущата позиция?"
+STR_UPLOAD_SUCCESS: "Прогресът е качен!"
+STR_ALREADY_SYNCED: "Вече е синхронизиран"
+STR_SYNC_FAILED_MSG: "Неуспешна синхронизация"
+STR_SAVE_PROGRESS_FAILED: "Прогресът не може да бъде запазен"
+STR_SECTION_PREFIX: "Раздел "
+STR_UPLOAD: "Качи"
+STR_BOOK_S_STYLE: "Стил на книгата"
+STR_EMBEDDED_STYLE: "Вграден стил"
+STR_FOCUS_READING: "Фокусирано четене"
+STR_OPDS_SERVER_URL: "URL адрес на OPDS сървъра"
+STR_PWR_BTN_FOOTNOTE_BACK: "Бързо връщане от бележки под линия"
+STR_BACK_SHORT_TO_FILE_BROWSER: "Натиск. назад към файловия браузър"
+STR_SET_SLEEP_COVER: "Задай корица"
+STR_FOOTNOTES: "Бележки под линия"
+STR_NO_FOOTNOTES: "Няма бележки под линия на тази страница"
+STR_LINK: "[връзка]"
+STR_SCREENSHOT_BUTTON: "Направи снимка на екрана"
+STR_SLEEP_TIMER_VALUE_FORMAT: "%u мин"
+STR_SLEEP_NEVER: "Никога"
+STR_STEP_HINT_FRONT: "Предни бутони:"
+STR_STEP_HINT_SIDE: "Странични бутони:"
+STR_ADD_SERVER: "Добави сървър"
+STR_SERVER_NAME: "Име на сървъра"
+STR_NO_SERVERS: "Няма конфигурирани OPDS сървъри"
+STR_DELETE_SERVER: "Изтрий сървъра"
+STR_OPDS_SERVERS: "OPDS сървъри"
+STR_OPDS_DOWNLOAD_FOLDER: "Папка за изтегляне"
+STR_OPDS_FILENAME_FORMAT: "Формат на името на файла"
+STR_FMT_AUTHOR_TITLE: "Автор - Заглавие"
+STR_FMT_TITLE_AUTHOR: "Заглавие - Автор"
+STR_FMT_TITLE: "Заглавие"
+STR_OPDS_SD_ROOT: "Корен на SD картата"
+STR_AUTO_TURN_ENABLED: "Автоматично обръщане на страница: "
+STR_AUTO_TURN_PAGES_PER_MIN: "Автоматично обръщане (страници в минута)"
+STR_MANAGE_FONTS: "Управление на шрифтовете"
+STR_FONT_BROWSER: "Браузър на шрифтове"
+STR_LOADING_FONT_LIST: "Зареждане на списъка с шрифтове..."
+STR_NO_FONTS_AVAILABLE: "Няма налични шрифтове"
+STR_FONT_INSTALLED: "Шрифтът е инсталиран!"
+STR_FONT_INSTALL_FAILED: "Неуспешна инсталация на шрифта"
+STR_INSTALLED: "Инсталиран"
+STR_DOWNLOAD_ALL: "Изтегли всички"
+STR_UPDATE_ALL: "Актуализирай всички"
+STR_UPDATE_AVAILABLE: "Актуализация"
+STR_CRASH_TITLE: "Системен срив"
+STR_CRASH_DESCRIPTION: "Подробен отчет е запазен в crash_report.txt. Моля, приложи този файл към твоя бъг репорт."
+STR_CRASH_REASON: "Причина за срива:"
+STR_CRASH_NO_REASON: "(Не е записана причина)"
+STR_TILT_PAGE_TURN: "Обръщане на страница чрез накланяне"
+STR_KB_HINT_MOVE_CURSOR: "Натисни ЛЯВО или ДЯСНО за преместване на курсора"
+STR_KB_HINT_RETURN_CURSOR: "Натисни ЛЯВО за връщане към позицията на курсора"
+STR_KB_HINT_HIDE_PASSWORD: "Задръж ДЯСНО и натисни [***] за скриване на паролата"
+STR_KB_HINT_SHOW_PASSWORD: "Задръж ДЯСНО и натисни [abc] за показване на паролата"
+STR_KB_HINT_TOGGLE_HIDE_PASSWORD: "Натисни [***] за скриване на паролата"
+STR_KB_HINT_TOGGLE_SHOW_PASSWORD: "Натисни [abc] за показване на паролата"
+STR_KB_HINT_EDIT_ENTRY: "Задръж НАГОРЕ за редактиране на записа"
+STR_KB_TIPS: "Съвети:"
+STR_KB_HINT_RETURN_KEYBOARD: "Натисни НАДОЛУ за връщане към клавиатурата"
+STR_KB_HINT_EXIT_URL_MODE: "Натисни ABC за изход от URL режим"
+STR_KB_HINT_CLEAR_TEXT: "Задръж DEL за изчистване на целия текст"
+STR_KB_HINT_SECONDARY_CHAR: "Задръж SELECT за символи"
+STR_KB_HINT_UPPER_SECONDARY: "Задръж SELECT за ГЛАВНИ БУКВИ или символи"
+STR_KB_HINT_LOWER_SECONDARY: "Задръж SELECT за малки букви или символи"
+STR_KB_HINT_URL_SNIPPETS: "Натисни URL за фрагменти"
+STR_SD_FIRMWARE_UPDATE: "Актуализация на фърмуера чрез SD карта"
+STR_SELECT_FIRMWARE_FILE: "Избери файл с фърмуер (.bin)"
+STR_NO_BIN_FILES: "Не са намерени .bin файлове"
+STR_VALIDATING_FIRMWARE: "Валидиране на фърмуера..."
+STR_INVALID_FIRMWARE: "Невалиден файл с фърмуер"
+STR_FIRMWARE_TOO_LARGE: "Фърмуерът е твърде голям за дяла"
+STR_FIRMWARE_TOO_SMALL: "Файлът с фърмуер е твърде малък"
+STR_FIRMWARE_UPDATE_PROMPT: "Актуализиране на фърмуера?"
+STR_FIRMWARE_FILE_OPEN_FAILED: "Файлът не може да бъде отворен"
+STR_FIRMWARE_WRITE_FAILED: "Неуспешен запис на фърмуера"
+STR_FIRMWARE_UPDATE_DO_NOT_POWER_OFF: "Не изключвай захранването!"
+STR_RECOVERY_MODE: "Режим за възстановяване"
+STR_RECOVERY_MODE_HINT: "Постави firmware.bin в основната директория на SD картата и го избери"

lib/I18n/translations/catalan.yaml

@@ -273,11 +273,13 @@ STR_SUNLIGHT_FADING_FIX: "Correcció de l'esvaïment pel sol"
 STR_QUICK_RESUME_TIMEOUT: "Represa ràpida per inactivitat"
 STR_REMAP_FRONT_BUTTONS: "Reassigna els botons frontals"
 STR_BOOKMARKS: "Punts de llibre"
+STR_NO_BOOKMARKS: "No hi ha punts de llibre"
 STR_BOOKMARK_ADDED: "S'ha afegit el punt de llibre."
 STR_BOOKMARK_REMOVED: "S'ha eliminat el punt de llibre."
 STR_OPDS_BROWSER: "Navegador OPDS"
 STR_COVER_CUSTOM: "Portada + Personalitzat"
 STR_QUICK_RESUME: "Represa ràpida"
+STR_TRANSPARENT: "Transparent"
 STR_MENU_RECENT_BOOKS: "Llibres recents"
 STR_REMOVE_FROM_RECENTS: "Vols suprimir-lo de Llibres recents?"
 STR_NO_RECENT_BOOKS: "No hi ha llibres recents"
@@ -422,6 +424,7 @@ STR_VALIDATING_FIRMWARE: "S'està validant el firmware..."
 STR_INVALID_FIRMWARE: "Fitxer de firmware no vàlid"
 STR_FIRMWARE_TOO_LARGE: "El firmware és massa gran per a la partició"
 STR_FIRMWARE_TOO_SMALL: "El fitxer de firmware és massa petit"
+STR_FIRMWARE_WRONG_DEVICE: "El firmware és per a un altre dispositiu"
 STR_FIRMWARE_UPDATE_PROMPT: "Vols actualitzar el firmware?"
 STR_FIRMWARE_FILE_OPEN_FAILED: "No es pot obrir el fitxer"
 STR_FIRMWARE_WRITE_FAILED: "Ha fallat l'escriptura del firmware"

lib/I18n/translations/english.yaml

@@ -299,12 +299,14 @@ STR_THEME_LYRA_EXTENDED: "Lyra Extended"
 STR_SUNLIGHT_FADING_FIX: "Sunlight Fading Fix"
 STR_REMAP_FRONT_BUTTONS: "Remap Front Buttons"
 STR_BOOKMARKS: "Bookmarks"
+STR_NO_BOOKMARKS: "No bookmarks"
 STR_BOOKMARK_ADDED: "Bookmark added."
 STR_BOOKMARK_REMOVED: "Bookmark removed."
 STR_OPDS_BROWSER: "OPDS Browser"
 STR_SEARCH: "Search"
 STR_COVER_CUSTOM: "Cover + Custom"
 STR_QUICK_RESUME: "Quick Resume"
+STR_TRANSPARENT: "Transparent"
 STR_MENU_RECENT_BOOKS: "Recent Books"
 STR_REMOVE_FROM_RECENTS: "Remove from Recent Books?"
 STR_NO_RECENT_BOOKS: "No recent books"

lib/I18n/translations/orangutan.yaml

@@ -0,0 +1,328 @@
+_language_name: "Orangutan"
+_language_code: "OOK"
+_order: "34"
+
+STR_CROSSPOINT: "CrossPoint"
+STR_BOOTING: "OOK"
+STR_SLEEPING: "Oooook"
+STR_ENTERING_SLEEP: "Ook..."
+STR_BROWSE_FILES: "Ook? OOK"
+STR_FILE_TRANSFER: "Oook!"
+STR_SETTINGS_TITLE: "OOK!"
+STR_CONTINUE_READING: "Oooook ook"
+STR_RESUME: "OOk!"
+STR_NO_OPEN_BOOK: "OOK?"
+STR_START_READING: "Ook ook"
+STR_NO_FILES_FOUND: "Oook?"
+STR_SELECT_CHAPTER: "Ook? Oook OOK!"
+STR_NO_CHAPTERS: "Ook..."
+STR_END_OF_BOOK: "Oooook."
+STR_EMPTY_CHAPTER: "OOk?"
+STR_INDEXING: "Oook..."
+STR_LOADING: "Ooook..."
+STR_LOADING_POPUP: "Oook"
+STR_LOOKUP: "Ook? Oook! OOK"
+STR_WIFI_NETWORKS: "Wi-Fi OOK"
+STR_NO_NETWORKS: "Oook?"
+STR_NETWORKS_FOUND: "%zu OOK"
+STR_SCANNING: "Oook..."
+STR_FINDING_SAVED_WIFI: "Oook Wi-Fi..."
+STR_CONNECTING: "Ooook..."
+STR_CONNECTING_SAVED_WIFI: "OOk Wi-Fi..."
+STR_SHOW_NETWORKS: "OOK"
+STR_CONNECTED: "Oook!"
+STR_CONNECTION_FAILED: "OOk?"
+STR_FORGET_NETWORK: "Oook?"
+STR_SAVE_PASSWORD: "OOK?"
+STR_PRESS_OK_SCAN: "OOk OK"
+STR_JOIN_NETWORK: "Oook!"
+STR_CREATE_HOTSPOT: "Ooook"
+STR_JOIN_DESC: "Oook Wi-Fi"
+STR_HOTSPOT_DESC: "Oooook Wi-Fi"
+STR_STARTING_HOTSPOT: "Ooook..."
+STR_HOTSPOT_MODE: "OOk!"
+STR_CONNECT_WIFI_HINT: "Oook Wi-Fi"
+STR_OPEN_URL_HINT: "Oook URL"
+STR_SCAN_QR_HINT: "Oook QR:"
+STR_CALIBRE_WIRELESS: "Calibre OOK"
+STR_NETWORK_LEGEND: "* = OOK | + = OOk"
+STR_MAC_ADDRESS: "MAC!"
+STR_CHECKING_WIFI: "OOk Wi-Fi..."
+STR_ENTER_WIFI_PASSWORD: "Oook Wi-Fi"
+STR_ADD_HIDDEN_NETWORK: "Oook..."
+STR_ENTER_WIFI_SSID: "OOk (SSID)"
+STR_TO_PREFIX: "Oo "
+STR_CALIBRE_RECEIVING: "Oook: "
+STR_CALIBRE_RECEIVED: "OOK!: "
+STR_CAT_DISPLAY: "OOK"
+STR_CAT_READER: "OOk"
+STR_CAT_CONTROLS: "Ook!"
+STR_CAT_SYSTEM: "Oook"
+STR_SLEEP_SCREEN: "Oooook"
+STR_NIGHT_MODE: "Ook!"
+STR_QUICK_RESUME_TIMEOUT: "Oook ook"
+STR_SLEEP_COVER_MODE: "Ook ook"
+STR_HIDE_BATTERY: "OOk %"
+STR_EXTRA_SPACING: "Oook ook"
+STR_TEXT_AA: "Ook-ook"
+STR_IMAGES: "OOk!"
+STR_IMAGES_DISPLAY: "Oook"
+STR_IMAGES_PLACEHOLDER: "Ooook"
+STR_IMAGES_SUPPRESS: "OOK"
+STR_EOB_HOME: "Oook"
+STR_EOB_CONTINUE_WITH: "Oook ook"
+STR_SHORT_PWR_BTN: "Oooook OOK"
+STR_ORIENTATION: "Ook? Oooook OOK"
+STR_SIDE_BTN_LAYOUT: "Oook ook"
+STR_TOUCH_READER_CONTROLS: "OOk! OOK"
+STR_FRONT_BTN_FOLLOW_ORIENTATION: "Oook OOK"
+STR_LONG_PRESS_BEHAVIOR: "Oooook OOK"
+STR_LONG_PRESS_BEHAVIOR_OFF: "OFF"
+STR_LONG_PRESS_BEHAVIOR_SKIP: "Oook!"
+STR_LONG_PRESS_BEHAVIOR_ORIENTATION: "Ook? OOK"
+STR_LONG_PRESS_MENU: "Oooook!"
+STR_FONT_PREVIEW_TEXT: "Ook ook ook."
+STR_FONT_FAMILY: "Oook OOK"
+STR_FONT_SIZE: "OOk OOK"
+STR_TEXT_SETTINGS: "Oooook OOK: Ook!"
+STR_FONT: "OOk!"
+STR_SIZE: "OOK"
+STR_LAYOUT: "Oook"
+STR_ALIGNMENT: "Oooook"
+STR_STYLE: "OOk!"
+STR_NOT_IN_PREVIEW: "Oook?"
+STR_LINE_SPACING: "Oook ook"
+STR_SCREEN_MARGIN: "OOk ook"
+STR_PARA_ALIGNMENT: "Ook OOK"
+STR_HYPHENATION: "Ooook"
+STR_TIME_TO_SLEEP: "Oook..."
+STR_SHOW_HIDDEN_FILES: "OOk?"
+STR_REMOVE_READ_FROM_RECENTS: "Oook OOK"
+STR_MOVE_FINISHED_TO_READ: "Ook! OOK"
+STR_REFRESH_FREQ: "Oook!"
+STR_KOREADER_SYNC: "KOReader OOK"
+STR_CHECK_UPDATES: "Oook!"
+STR_LANGUAGE: "OOk?"
+STR_CLEAR_READING_CACHE: "Oook OOK"
+STR_USERNAME: "Oook"
+STR_PASSWORD: "OOk!"
+STR_SYNC_SERVER_URL: "Oook URL"
+STR_DOCUMENT_MATCHING: "Oook OOK"
+STR_SEND_METADATA: "Ook! OOK"
+STR_SYNC_BEHAVIOR: "OOk ook"
+STR_ASK_EVERY_TIME: "Oook?"
+STR_SMART_SYNC: "Oook!"
+STR_AUTHENTICATE: "Oooook"
+STR_SIGN_UP: "OOk!"
+STR_KOREADER_USERNAME: "KOReader OOK"
+STR_KOREADER_PASSWORD: "KOReader OOk"
+STR_FILENAME: "Oook"
+STR_KOREADER_AUTH: "KOReader OOK"
+STR_DONE: "Oook"
+STR_DARK: "OOk!"
+STR_LIGHT: "Oook"
+STR_CUSTOM: "Ooook"
+STR_COVER: "OOk?"
+STR_NONE_OPT: "OOk!"
+STR_FIT: "OOk"
+STR_CROP: "OOK!"
+STR_NEVER: "Oook!"
+STR_IN_READER: "Ook? OOK"
+STR_ALWAYS: "Oooook"
+STR_IGNORE: "OOk?"
+STR_SLEEP: "Oook!"
+STR_PAGE_TURN: "Oook OOK"
+STR_FORCE_REFRESH: "Ook! OOK"
+STR_PORTRAIT: "Oook"
+STR_LANDSCAPE_CW: "Oook OOK"
+STR_INVERTED: "OOk!"
+STR_ORIENTATION_INVERTED: "Ook 180°"
+STR_LANDSCAPE_CCW: "OOk OOK"
+STR_PREV_NEXT: "OOk/OOK"
+STR_NEXT_PREV: "OOK/OOk"
+STR_KOSYNC: "KOSync"
+STR_BOOKMARK_OPTION: "Oook!"
+STR_DICTIONARY: "Oooook"
+STR_DISABLED: "OOk!"
+STR_NOTO_SERIF: "Noto OOK"
+STR_NOTO_SANS: "Noto OOk"
+STR_TIGHT: "OOk!"
+STR_NORMAL: "Oook"
+STR_WIDE: "OOk!"
+STR_JUSTIFY: "Ooook!"
+STR_ALIGN_LEFT: "OOk"
+STR_CENTER: "Oook"
+STR_ALIGN_RIGHT: "OOK!"
+STR_PAGES_1: "1 OOK"
+STR_PAGES_5: "5 OOk"
+STR_PAGES_10: "10 OOK"
+STR_PAGES_15: "15 OOk"
+STR_PAGES_30: "30 OooK"
+
+STR_UPDATE: "Oook!"
+STR_CURRENT_VERSION: "OOK: "
+STR_NEW_VERSION: "OOk: "
+STR_DOWNLOADING: "Oooook..."
+STR_UNNAMED: "OOk?"
+STR_HOLD_OPEN_TO_DELETE: "Oook OOK"
+STR_NEXT_PAGE: "OOk »"
+STR_PREV_PAGE: "« OOK"
+STR_NETWORK_PREFIX: "OOk: "
+STR_IP_ADDRESS_PREFIX: "IP: "
+STR_SD_CARD: "SD OOK"
+STR_BACK: "« OOK"
+STR_EXIT: "« OOk"
+STR_HOME: "« Oook"
+STR_SELECT: "OOk!"
+STR_SELECTED: "Oooook"
+STR_TOGGLE: "Oook!"
+STR_TOGGLE_BOOKMARK: "Ook? OOK! Oooook"
+STR_CONFIRM: "Oooook"
+STR_CANCEL: "OOk?"
+STR_CONNECT: "Oooook"
+STR_OPEN: "Oook"
+STR_DOWNLOAD: "Oooook"
+STR_RETRY: "Oook!"
+STR_YES: "OOk"
+STR_NO: "Oo"
+STR_SHOW: "Oook"
+STR_HIDE: "OOk!"
+STR_STATE_ON: "OK"
+STR_STATE_OFF: "OOk"
+STR_NOT_SET: "Oook"
+STR_DIR_LEFT: "OOk!"
+STR_DIR_RIGHT: "OOK!"
+STR_DIR_UP: "OK"
+STR_DIR_DOWN: "OOk!"
+STR_OK_BUTTON: "OK"
+STR_KEY_SHIFT: "OOk!"
+STR_KEY_MODE_SYMBOLS: "?123"
+STR_KEY_MODE_ABC: "abc"
+
+STR_SLEEP_COVER_FILTER: "Oook OOK"
+STR_FILTER_CONTRAST: "Oooook"
+STR_CUSTOMISE_STATUS_BAR: "Oook OOK"
+STR_CHAPTER_PAGE_COUNT: "OOk OOK"
+STR_BOOK_PROGRESS_PERCENTAGE: "Oook OOK"
+STR_PROGRESS_BAR: "Oook OOK"
+STR_PROGRESS_BAR_THICKNESS: "Oook OOK"
+STR_PROGRESS_BAR_THIN: "OOk!"
+STR_PROGRESS_BAR_MEDIUM: "Oook"
+STR_PROGRESS_BAR_THICK: "Oook!"
+STR_BOOK: "Oook"
+STR_CHAPTER: "OOk!"
+STR_EXAMPLE_CHAPTER: "OOk 21"
+STR_EXAMPLE_BOOK: "Oook OOK"
+STR_PREVIEW: "Oook!"
+STR_TITLE: "OOk?"
+STR_BATTERY: "Oook"
+STR_XTC_STATUS_BAR: "XTC OOK"
+STR_BOTTOM: "Oooook"
+STR_TOP: "OOk"
+STR_CLOCK: "Oook!"
+STR_CLOCK_UTC_OFFSET: "Oook OOK"
+STR_CLOCK_FORMAT: "OOk OOK"
+STR_CLOCK_FORMAT_24H: "24-OOK"
+STR_CLOCK_FORMAT_12H: "12-OOk"
+STR_CURRENT_TIME: "OOk:"
+STR_NEXT_FIELD: "Oook"
+STR_CLOCK_SYNC: "OOk OOK"
+STR_CLOCK_SYNC_NOW: "Oook OOK"
+STR_CLOCK_SYNCING: "Oooook..."
+STR_CLOCK_SYNC_OK: "Oook!"
+STR_CLOCK_SYNC_FAIL: "OOk?"
+STR_CLOCK_SYNC_NO_WIFI: "Wi-Fi OOK"
+STR_CLOCK_SYNCED: "Oooook"
+STR_UI_THEME: "OOk OOK"
+STR_THEME_CLASSIC: "Oook!"
+STR_THEME_LYRA: "OOk!"
+STR_THEME_ROUNDEDRAFF: "Oook"
+STR_THEME_LYRA_EXTENDED: "Oook OOK"
+STR_SUNLIGHT_FADING_FIX: "Oook OOK"
+STR_REMAP_FRONT_BUTTONS: "Oook OOK"
+
+STR_BOOKMARKS: "Ook! OOK Oooook"
+STR_NO_BOOKMARKS: "OOk?"
+STR_BOOKMARK_ADDED: "Ook!"
+STR_BOOKMARK_REMOVED: "Oook!"
+STR_OPDS_BROWSER: "OPDS OOK"
+STR_SEARCH: "Oook!"
+STR_COVER_CUSTOM: "OOk + OOK"
+STR_QUICK_RESUME: "Oook OOK"
+STR_MENU_RECENT_BOOKS: "Oook OOK"
+STR_REMOVE_FROM_RECENTS: "OOk?"
+STR_NO_RECENT_BOOKS: "Oook?"
+STR_CALIBRE_DESC: "Calibre OOK"
+STR_FORGET_AND_REMOVE: "Oook?"
+STR_FORGET_BUTTON: "Oook!"
+STR_CALIBRE_STARTING: "Calibre OOK"
+STR_CALIBRE_SETUP: "OOk!"
+STR_CALIBRE_STATUS: "Oook"
+STR_CLEAR_BUTTON: "Oook!"
+STR_DEFAULT_VALUE: "OOk OOK"
+STR_UNASSIGNED: "OOk?"
+STR_ALREADY_ASSIGNED: "Oook OOK"
+STR_GO_TO_PERCENT: "Oook! Ook? %"
+STR_GO_HOME_BUTTON: "Oook OOK! Oooook"
+STR_SYNC_PROGRESS: "Oooook OOK! Ook!"
+STR_DELETE_CACHE: "Oook OOK? Oooook!"
+STR_DELETE: "Oooook"
+STR_CONFIRM_DELETE_BOOKMARK: "Oook?"
+STR_DISPLAY_QR: "Oooook OOK QR!"
+STR_CHAPTER_PREFIX: "OOk: "
+STR_BOOK_PREFIX: "Oook: "
+STR_SYNCING_TIME: "Oook..."
+STR_FETCH_PROGRESS: "OOk..."
+STR_UPLOAD_PROGRESS: "Oooook..."
+STR_KOREADER_SETUP_HINT: "KOReader OOK"
+STR_PROGRESS_FOUND: "Oook!"
+STR_REMOTE_LABEL: "OOk:"
+STR_LOCAL_LABEL: "Oook:"
+STR_PAGE_OVERALL_FORMAT: "OOk %d, %.2f%%"
+STR_PAGE_TOTAL_OVERALL_FORMAT: "Oook %d/%d, %.2f%%"
+STR_DEVICE_FROM_FORMAT: "OOk: %s"
+STR_APPLY_REMOTE: "Oook OOK"
+STR_UPLOAD_LOCAL: "OOk OOK"
+STR_UPLOAD_PROMPT: "Oook?"
+STR_UPLOAD_SUCCESS: "Oooook!"
+STR_ALREADY_SYNCED: "Oook!"
+STR_SECTION_PREFIX: "OOk "
+STR_UPLOAD: "Oooook"
+STR_BOOK_S_STYLE: "Oook OOK"
+STR_EMBEDDED_STYLE: "OOk OOK"
+STR_FOCUS_READING: "Oook OOK"
+STR_OPDS_SERVER_URL: "OPDS OOK"
+STR_PWR_BTN_FOOTNOTE_BACK: "Oook OOK"
+STR_BACK_SHORT_TO_FILE_BROWSER: "OOk OOK"
+STR_SET_SLEEP_COVER: "Oook OOK"
+STR_FOOTNOTES: "Ook! Oook OOK"
+STR_NO_FOOTNOTES: "Oook?"
+STR_LINK: "[Ook]"
+STR_SCREENSHOT_BUTTON: "Oook! OOK? Ook!"
+STR_SLEEP_TIMER_VALUE_FORMAT: "%u OOK"
+STR_SLEEP_NEVER: "Oook!"
+STR_ADD_SERVER: "Oook!"
+STR_SERVER_NAME: "OOk OOK"
+STR_DELETE_SERVER: "Oook OOK"
+STR_OPDS_SERVERS: "OPDS OOK"
+STR_OPDS_DOWNLOAD_FOLDER: "Oook OOK"
+STR_OPDS_FILENAME_FORMAT: "OOk OOK"
+STR_FMT_AUTHOR_TITLE: "OOk - OOK"
+STR_FMT_TITLE_AUTHOR: "OOK - OOk"
+STR_FMT_TITLE: "Oook"
+STR_OPDS_SD_ROOT: "SD OOK"
+STR_AUTO_TURN_ENABLED: "OOk: "
+STR_AUTO_TURN_PAGES_PER_MIN: "Oooook OOK (Ook!)"
+STR_MANAGE_FONTS: "Oook OOK"
+STR_FONT_BROWSER: "OOk OOK"
+STR_LOADING_FONT_LIST: "Oooook..."
+STR_NO_FONTS_AVAILABLE: "Oook?"
+STR_FONT_INSTALLED: "Oook!"
+STR_INSTALLED: "OOk!"
+STR_DOWNLOAD_ALL: "Oook OOK"
+STR_UPDATE_ALL: "OOk OOK"
+STR_UPDATE_AVAILABLE: "Oook!"
+STR_TILT_PAGE_TURN: "Oook OOK"
+STR_SD_FIRMWARE_UPDATE: "SD Oooook Ooook Ooooook"
+STR_STEP_HINT_FRONT: "Ooook Ooooook:"
+STR_STEP_HINT_SIDE: "OOK Oook:"

lib/I18n/translations/spanish.yaml

@@ -297,12 +297,14 @@ STR_SUNLIGHT_FADING_FIX: "Corrección de desvanecimiento"
 STR_QUICK_RESUME_TIMEOUT: "Reanudación rápida tras tiempo"
 STR_REMAP_FRONT_BUTTONS: "Reconfigurar botones frontales"
 STR_BOOKMARKS: "Marcadores"
+STR_NO_BOOKMARKS: "No hay marcadores"
 STR_BOOKMARK_ADDED: "Marcador añadido."
 STR_BOOKMARK_REMOVED: "Marcador eliminado."
 STR_OPDS_BROWSER: "Navegador OPDS"
 STR_SEARCH: "Buscar"
 STR_COVER_CUSTOM: "Portada + Pers."
 STR_QUICK_RESUME: "Reanudación rápida"
+STR_TRANSPARENT: "Transparente"
 STR_MENU_RECENT_BOOKS: "Libros recientes"
 STR_REMOVE_FROM_RECENTS: "¿Eliminar de Libros recientes?"
 STR_NO_RECENT_BOOKS: "No hay libros recientes"
@@ -422,6 +424,7 @@ STR_VALIDATING_FIRMWARE: "Validando el firmware..."
 STR_INVALID_FIRMWARE: "Archivo de firmware no válido"
 STR_FIRMWARE_TOO_LARGE: "Firmware demasiado grande p/la partición"
 STR_FIRMWARE_TOO_SMALL: "Firmware demasiado pequeño"
+STR_FIRMWARE_WRONG_DEVICE: "El firmware es para otro dispositivo"
 STR_FIRMWARE_UPDATE_PROMPT: "¿Actualizar el firmware?"
 STR_FIRMWARE_FILE_OPEN_FAILED: "No se puede abrir el archivo"
 STR_FIRMWARE_WRITE_FAILED: "Falló la escritura del firmware"

lib/I18n/translations/turkish.yaml

@@ -381,6 +381,7 @@ STR_FIRMWARE_TOO_SMALL: "Firmware dosyası çok küçük"
 STR_FIRMWARE_UPDATE_DO_NOT_POWER_OFF: "Cihazı kapatmayın!"
 STR_FIRMWARE_UPDATE_PROMPT: "Firmware güncellensin mi?"
 STR_FIRMWARE_WRITE_FAILED: "Firmware yazılamadı"
+STR_FIRMWARE_WRONG_DEVICE: "Firmware farklı bir cihaz için"
 STR_FONT_BROWSER: "Yazı Tipi Tarayıcısı"
 STR_FONT_INSTALLED: "Yazı tipi yüklendi!"
 STR_FONT_INSTALL_FAILED: "Yazı tipi yüklenemedi"