Reformat touch reader controls enum definition

Changed the category of the tapForReaderMenu setting from STR_CAT_READER to STR_CAT_CONTROLS for better organization in the settings UI.

.github/workflows/ci.yml

@@ -18,7 +18,7 @@ jobs:
 
       - uses: actions/setup-python@v6
         with:
-          python-version: '3.14'
+          python-version: '3.13'
 
       - name: Install clang-format-21
         run: |
@@ -42,7 +42,7 @@ jobs:
 
       - uses: actions/setup-python@v6
         with:
-          python-version: '3.14'
+          python-version: '3.13'
 
       - name: Install uv
         uses: astral-sh/setup-uv@v7
@@ -51,7 +51,15 @@ jobs:
           enable-cache: false
 
       - name: Install PlatformIO Core
-        run: uv pip install --system -U https://github.com/pioarduino/platformio-core/archive/refs/tags/v6.1.19.zip
+        run: |
+          uv pip install --system -U https://github.com/pioarduino/platformio-core/archive/refs/tags/v6.1.19.zip
+          # platform-espressif32's builder/main.py imports these unconditionally; its own
+          # penv bootstrap (builder/penv_setup.py) is supposed to install them automatically
+          # but isn't picking them up reliably in this runner image, so pin them explicitly.
+          uv pip install --system -U "littlefs-python>=0.16.0" "fatfs-ng>=0.1.14" "pyyaml>=6.0.2" \
+            "rich-click>=1.8.6" "zopfli>=0.2.2" "intelhex>=2.3.0" "rich>=14.0.0" "urllib3<2" \
+            "cryptography>=45.0.3" "certifi>=2025.8.3" "ecdsa>=0.19.1" "bitstring>=4.3.1" \
+            "reedsolo>=1.5.3,<1.8" "esp-idf-size>=2.0.0" "esp-coredump>=1.14.0"
 
       - name: Cache PlatformIO packages
         uses: actions/cache@v4
@@ -63,9 +71,24 @@ jobs:
       - name: Run cppcheck
         run: pio check --fail-on-defect low --fail-on-defect medium --fail-on-defect high
 
-  build-default:
-    name: Build default
+  build:
+    name: Build ${{ matrix.env }}
     runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        # Artifact names match the release asset names OtaUpdater requests:
+        # plain firmware.bin for the C3 X4/X3 binary, firmware-<board>.bin for
+        # the S3 boards.
+        include:
+          - env: default
+            asset: firmware.bin
+          - env: sticky
+            asset: firmware-sticky.bin
+          - env: x4pro
+            asset: firmware-x4pro.bin
+          - env: papermono
+            asset: firmware-papermono.bin
     steps:
       - uses: actions/checkout@v6
         with:
@@ -73,7 +96,7 @@ jobs:
 
       - uses: actions/setup-python@v6
         with:
-          python-version: '3.14'
+          python-version: '3.13'
 
       - name: Install uv
         uses: astral-sh/setup-uv@v7
@@ -82,7 +105,15 @@ jobs:
           enable-cache: false
 
       - name: Install PlatformIO Core
-        run: uv pip install --system -U https://github.com/pioarduino/platformio-core/archive/refs/tags/v6.1.19.zip
+        run: |
+          uv pip install --system -U https://github.com/pioarduino/platformio-core/archive/refs/tags/v6.1.19.zip
+          # platform-espressif32's builder/main.py imports these unconditionally; its own
+          # penv bootstrap (builder/penv_setup.py) is supposed to install them automatically
+          # but isn't picking them up reliably in this runner image, so pin them explicitly.
+          uv pip install --system -U "littlefs-python>=0.16.0" "fatfs-ng>=0.1.14" "pyyaml>=6.0.2" \
+            "rich-click>=1.8.6" "zopfli>=0.2.2" "intelhex>=2.3.0" "rich>=14.0.0" "urllib3<2" \
+            "cryptography>=45.0.3" "certifi>=2025.8.3" "ecdsa>=0.19.1" "bitstring>=4.3.1" \
+            "reedsolo>=1.5.3,<1.8" "esp-idf-size>=2.0.0" "esp-coredump>=1.14.0"
 
       - name: Cache PlatformIO packages
         uses: actions/cache@v4
@@ -91,13 +122,12 @@ jobs:
           key: pio-${{ runner.os }}-${{ hashFiles('platformio.ini') }}
           restore-keys: pio-${{ runner.os }}-
 
-      - name: Build default firmware
+      - name: Build ${{ matrix.env }} firmware
         run: |
           set -euo pipefail
-          pio run -e default | tee pio.log
+          pio run -e ${{ matrix.env }} | tee pio.log
 
       - name: Extract firmware stats
-
         run: |
           set -euo pipefail
           ram_line="$(grep -E "RAM:\\s" -m1 pio.log || true)"
@@ -105,64 +135,18 @@ jobs:
           echo "ram_line=${ram_line}" >> "$GITHUB_OUTPUT"
           echo "flash_line=${flash_line}" >> "$GITHUB_OUTPUT"
           {
-            echo "## Firmware build stats"
+            echo "## ${{ matrix.env }} firmware build stats"
             if [ -n "$ram_line" ]; then echo "- ${ram_line}"; else echo "- RAM: not found"; fi
             if [ -n "$flash_line" ]; then echo "- ${flash_line}"; else echo "- Flash: not found"; fi
           } >> "$GITHUB_STEP_SUMMARY"
 
-      - name: Upload firmware.bin artifact
+      - name: Upload firmware artifact
         uses: actions/upload-artifact@v6
         with:
-          name: firmware.bin
-          path: .pio/build/default/firmware.bin
+          name: ${{ matrix.asset }}
+          path: .pio/build/${{ matrix.env }}/firmware.bin
           if-no-files-found: error
 
-  build-sticky:
-    name: Build sticky
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v6
-        with:
-          submodules: recursive
-
-      - uses: actions/setup-python@v6
-        with:
-          python-version: '3.14'
-
-      - name: Install uv
-        uses: astral-sh/setup-uv@v7
-        with:
-          version: "latest"
-          enable-cache: false
-
-      - name: Install PlatformIO Core
-        run: uv pip install --system -U https://github.com/pioarduino/platformio-core/archive/refs/tags/v6.1.19.zip
-
-      - name: Cache PlatformIO packages
-        uses: actions/cache@v4
-        with:
-          path: ~/.platformio
-          key: pio-${{ runner.os }}-${{ hashFiles('platformio.ini') }}
-          restore-keys: pio-${{ runner.os }}-
-
-      - name: Build sticky firmware
-        run: |
-          set -euo pipefail
-          pio run -e sticky | tee pio.log
-
-      - name: Extract firmware stats
-        run: |
-          set -euo pipefail
-          ram_line="$(grep -E "RAM:\\s" -m1 pio.log || true)"
-          flash_line="$(grep -E "Flash:\\s" -m1 pio.log || true)"
-          echo "ram_line=${ram_line}" >> "$GITHUB_OUTPUT"
-          echo "flash_line=${flash_line}" >> "$GITHUB_OUTPUT"
-          {
-            echo "## Sticky firmware build stats"
-            if [ -n "$ram_line" ]; then echo "- ${ram_line}"; else echo "- RAM: not found"; fi
-            if [ -n "$flash_line" ]; then echo "- ${flash_line}"; else echo "- Flash: not found"; fi
-          } >> "$GITHUB_STEP_SUMMARY"
-
   unit-tests:
     runs-on: ubuntu-latest
     steps:
@@ -195,8 +179,7 @@ jobs:
   test-status:
     name: Test Status
     needs:
-      - build-default
-      - build-sticky
+      - build
       - clang-format
       - cppcheck
       - unit-tests

.github/workflows/release-fonts.yml

@@ -24,7 +24,7 @@ jobs:
 
       - uses: actions/setup-python@v6
         with:
-          python-version: '3.14'
+          python-version: '3.13'
 
       - name: Install font tools
         run: pip install freetype-py fonttools pyyaml

.github/workflows/release.yml

@@ -0,0 +1,83 @@
+name: Compile Release
+
+# Builds every board's release firmware on tag push, with the .bin named
+# exactly as OtaUpdater requests it from the GitHub release: plain
+# firmware.bin for the C3 X4/X3 binary, firmware-<board>.bin for every other
+# board. Attach the artifacts' .bin files to the release as-is.
+
+on:
+  push:
+    tags:
+      - '*'
+
+permissions:
+  contents: read
+
+jobs:
+  build-release:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - pio_env: gh_release
+            asset: firmware.bin
+          - pio_env: sticky-gh_release
+            asset: firmware-sticky.bin
+          - pio_env: x4pro-gh_release
+            asset: firmware-x4pro.bin
+          - pio_env: papermono-gh_release
+            asset: firmware-papermono.bin
+    steps:
+      - uses: actions/checkout@v6
+        with:
+          submodules: recursive
+
+      - uses: actions/setup-python@v6
+        with:
+          python-version: '3.13'
+
+      - name: Install uv
+        uses: astral-sh/setup-uv@v7
+        with:
+          version: "latest"
+          enable-cache: false
+
+      - name: Install PlatformIO Core
+        run: |
+          uv pip install --system -U https://github.com/pioarduino/platformio-core/archive/refs/tags/v6.1.19.zip
+          # platform-espressif32's builder/main.py imports these unconditionally; its own
+          # penv bootstrap (builder/penv_setup.py) is supposed to install them automatically
+          # but isn't picking them up reliably in this runner image, so pin them explicitly.
+          uv pip install --system -U "littlefs-python>=0.16.0" "fatfs-ng>=0.1.14" "pyyaml>=6.0.2" \
+            "rich-click>=1.8.6" "zopfli>=0.2.2" "intelhex>=2.3.0" "rich>=14.0.0" "urllib3<2" \
+            "cryptography>=45.0.3" "certifi>=2025.8.3" "ecdsa>=0.19.1" "bitstring>=4.3.1" \
+            "reedsolo>=1.5.3,<1.8" "esp-idf-size>=2.0.0" "esp-coredump>=1.14.0"
+
+      - name: Cache PlatformIO packages
+        uses: actions/cache@v4
+        with:
+          path: ~/.platformio
+          key: pio-${{ runner.os }}-${{ hashFiles('platformio.ini') }}
+          restore-keys: pio-${{ runner.os }}-
+
+      - name: Build CrossPoint
+        run: pio run -e ${{ matrix.pio_env }} -j1
+
+      - name: Name release asset
+        run: |
+          if [ "${{ matrix.asset }}" != "firmware.bin" ]; then
+            cp ".pio/build/${{ matrix.pio_env }}/firmware.bin" \
+              ".pio/build/${{ matrix.pio_env }}/${{ matrix.asset }}"
+          fi
+
+      - name: Upload Artifacts
+        uses: actions/upload-artifact@v4
+        with:
+          name: ${{ matrix.asset }}
+          path: |
+            .pio/build/${{ matrix.pio_env }}/bootloader.bin
+            .pio/build/${{ matrix.pio_env }}/${{ matrix.asset }}
+            .pio/build/${{ matrix.pio_env }}/firmware.elf
+            .pio/build/${{ matrix.pio_env }}/firmware.map
+            .pio/build/${{ matrix.pio_env }}/partitions.bin

.github/workflows/release_candidate.yml

@@ -14,7 +14,7 @@ jobs:
 
       - uses: actions/setup-python@v6
         with:
-          python-version: '3.14'
+          python-version: '3.13'
 
       - name: Install uv
         uses: astral-sh/setup-uv@v7
@@ -23,7 +23,15 @@ jobs:
           enable-cache: false
 
       - name: Install PlatformIO Core
-        run: uv pip install --system -U https://github.com/pioarduino/platformio-core/archive/refs/tags/v6.1.19.zip
+        run: |
+          uv pip install --system -U https://github.com/pioarduino/platformio-core/archive/refs/tags/v6.1.19.zip
+          # platform-espressif32's builder/main.py imports these unconditionally; its own
+          # penv bootstrap (builder/penv_setup.py) is supposed to install them automatically
+          # but isn't picking them up reliably in this runner image, so pin them explicitly.
+          uv pip install --system -U "littlefs-python>=0.16.0" "fatfs-ng>=0.1.14" "pyyaml>=6.0.2" \
+            "rich-click>=1.8.6" "zopfli>=0.2.2" "intelhex>=2.3.0" "rich>=14.0.0" "urllib3<2" \
+            "cryptography>=45.0.3" "certifi>=2025.8.3" "ecdsa>=0.19.1" "bitstring>=4.3.1" \
+            "reedsolo>=1.5.3,<1.8" "esp-idf-size>=2.0.0" "esp-coredump>=1.14.0"
 
       - name: Cache PlatformIO packages
         uses: actions/cache@v4

AGENTS.md

@@ -1 +1 @@
-/home/urit/Documents/CrossPoint/crosspoint-reader/.skills/SKILL.md
+.skills/SKILL.md

README.md

@@ -36,7 +36,7 @@ CrossPoint is open-source e-reader firmware - community-built, fully hackable, f
   - OPDS browser with saved servers (up to 8), search, pagination, and direct download
   - OTA update checks and installs from GitHub releases
 
-- **Customization**: multiple themes (Classic, Lyra, Lyra Extended, RoundedRaff), sleep screen modes, front/side button remapping, status bar controls, power-button behavior, refresh cadence, and more.
+- **Customization**: multiple themes (Classic, Lyra, Lyra Extended, RoundedRaff), sleep screen modes including transparent overlays, front/side button remapping, status bar controls, power-button behavior, refresh cadence, and more.
 
 - **Localization**: 24 UI languages and counting. RTL support.
 
@@ -136,7 +136,7 @@ Conversion runs the firmware repo's `lib/EpdFont/scripts/fontconvert_sdcard.py`
 - [Web server endpoints](./docs/webserver-endpoints.md)
 - [Project scope](./SCOPE.md)
 - [Contributing docs](./docs/contributing/README.md)
-- [Touch and UI development](./docs/contributing/touch-and-ui.md) - FreeInkUI components for new screens, the touch bridge for existing ones, and build envs for the non-Xteink touch devices
+- [Touch and UI development](./docs/contributing/touch-and-ui.md) - how to build new screens on the FreeInkUI activity bases (UiListActivity and friends), plus build envs for the non-Xteink touch devices
 
 ---
 

USER_GUIDE.md

@@ -186,7 +186,7 @@ The Settings screen allows you to configure the device's behavior. There are a f
   - "None" - A blank screen
   - "Cover + Custom" - The book cover image while actively reading, falls back to "Custom" behavior otherwise
   - "Quick resume" - The text of the last page read will be displayed on the sleep screen and a moon icon is shown on the edge of the screen. Waking up the device will return to the same page of the opened book. This is useful for quickly resuming reading without waiting for the device to fully wake up and load the book.
-
+  - "Transparent" - A transparent overlay image drawn over the current screen; see [Sleep Screen](#37-sleep-screen) below for more information
 - **Sleep Screen Cover Mode**: How to display the book cover when "Cover" sleep screen is selected:
   
   - "Fit" (default) - Scale the image down to fit centered on the screen, padding with white borders as necessary
@@ -501,6 +501,7 @@ The **Sleep Screen** setting controls what is displayed when the device goes to
 | **Custom**         | A custom image from the SD card (see below). Falls back to **Dark** if no custom image is found.                             |
 | **Cover**          | The cover of the currently open book. Falls back to **Dark** if no book is open.                                             |
 | **Cover + Custom** | The cover of the currently open book, shown only while actively reading. Falls back to **Custom** behavior when not reading. |
+| **Transparent**    | A BMP overlay drawn over the current screen. Supports alpha transparency in 32-bit BGRA images and treats white as transparent in regular BMPs. Falls back to **Dark** if no valid overlay image is found. |
 | **None**           | A blank screen.                                                                                                              |
 
 #### Cover settings
@@ -515,12 +516,21 @@ When using **Cover** or **Cover + Custom**, two additional settings apply:
 To use custom sleep images, set the sleep screen mode to **Custom** or **Cover + Custom**, then place images on the SD card:
 
 - **Multiple Images (recommended):** Create a `.sleep` directory in the root of the SD card and place any number of `.bmp` images inside. One will be randomly selected each time the device sleeps. (A directory named `sleep` is also accepted as a fallback.)
-- **Single Image:** Place a file named `sleep.bmp` in the root directory. This is used as a fallback if no valid images are found in the `.sleep`/`sleep` directory.
+- **Single Image:** Place a file named `sleep.bmp` in the root directory. This takes priority over the `.sleep`/`sleep` directories.
+
+#### Transparent overlay images
+
+To use transparent sleep overlays, set the sleep screen mode to **Transparent**, then place BMP files on the SD card:
+
+- **Multiple Images (recommended):** Create a `.sleep-overlay` directory in the root of the SD card and place any number of valid overlay `.bmp` images inside. One will be randomly selected each time the device sleeps. A directory named `sleep-overlay` is also accepted as a fallback.
+- **Single Image:** Place a file named `sleep-overlay.bmp` in the root directory. This takes priority over the `.sleep-overlay`/`sleep-overlay` directories.
+
+Transparent overlay files are intentionally separate from normal sleep images. Regular BMP formats supported by CrossPoint are accepted; white pixels leave the existing screen unchanged. For per-pixel alpha transparency, use a 32-bit BGRA BMP with both visible and non-opaque pixels. Opaque white pixels in these alpha images erase the content behind them.
 
 > [!TIP]
 > For best results:
-> 
-> - Use uncompressed BMP files with 24-bit color depth
+> - For non-transparent **Custom** mode, use uncompressed BMP files with 24-bit color depth.
+> - For **Transparent** mode, use a regular BMP for white-as-transparent artwork or an uncompressed 32-bit BGRA BMP for per-pixel alpha.
 > - X4: Use a resolution of 480x800 pixels to match the device's screen resolution.
 > - X3: Use a resolution of 528x792 pixels to match the device's screen resolution.
 

docs/contributing/touch-and-ui.md

@@ -1,23 +1,88 @@
 # Touch and UI Development
 
-CrossPoint now runs on touch devices (Seeed Sticky, M5Paper, LilyGo T5) alongside the button-only Xteink X3/X4. Every screen must work with both input styles. There are two supported ways to get there:
+CrossPoint runs on touch devices (Seeed Sticky, M5Paper, M5Stack PaperMono, LilyGo T5, Xteink X4 Pro) alongside the button-only Xteink X3/X4. Every screen must work with both input styles.
 
-1. **New screens: build them with FreeInkUI components.** Touch hit-testing, tap highlighting, long-press, and button focus navigation come with the component; you never hand-roll coordinate math.
-2. **Existing screens and in-flight features: use the MappedInputManager touch bridge.** A small set of helpers adds tap/hold/swipe support to hand-rolled rendering without restructuring the activity.
+**There is one supported way to build a new screen: FreeInkUI, hosted through the firmware base classes below.** Touch hit-testing, tap highlighting, long-press, swipe scrolling, and button focus navigation all come from the shared stack; you never hand-roll coordinate math.
 
-If you are starting a new activity, use FreeInkUI. If you have a feature branch with a hand-rolled screen already working on buttons, use the bridge; do not rewrite mid-flight.
+The old bridge helpers (`rowTouch`, `colTouch`, `wasTapInRect`, manual rect `contains()` checks) are legacy. They survive only for the two remaining hand-rolled surfaces (the theme-driven home screen and the reader page) and must not appear in new code. PRs that add new uses will be asked to convert.
 
 ---
 
-## Path 1: New screens with FreeInkUI
+## Picking the right host
 
-FreeInkUI (`freeink-sdk/libs/ui/FreeInkUI`, namespace `freeink::ui`) is an immediate-mode component library. The core idea:
+| Your screen is... | Use | In-tree reference |
+|---|---|---|
+| A single list of rows | subclass `UiListActivity` | [`LanguageSelectActivity`](../../src/activities/settings/LanguageSelectActivity.cpp) (minimal), [`RecentBooksActivity`](../../src/activities/home/RecentBooksActivity.cpp) (long-press) |
+| Tabbed lists | subclass `UiTabListActivity` | [`SettingsActivity`](../../src/activities/settings/SettingsActivity.cpp) |
+| Custom FUI layout (sliders, prompts, state machines) | inherit `UiAppHost` directly | [`EpubReaderPercentSelectionActivity`](../../src/activities/reader/EpubReaderPercentSelectionActivity.cpp), [`WifiSelectionActivity`](../../src/activities/network/WifiSelectionActivity.cpp) |
+| A modal picker or confirm inside a legacy activity | `OptionPopup` (or push `ConfirmationActivity`) | [`OtaUpdateActivity`](../../src/activities/settings/OtaUpdateActivity.cpp) |
+| A Yes/No prompt inside a FUI screen | build `fui::optionDialog` into the screen | `WifiSelectionActivity::buildPromptDialog` |
 
-- While a component renders, it registers its tappable areas ("hit rects") into the frame's interaction buffer via `Frame::hit(rect, action, value, inputMask, state)`.
-- Each loop you build an `InputSnapshot` from the input manager and route it against that buffer. If a tap (or mapped button press) lands in a registered rect, the routed `ActionEvent` tells you which action fired and with what value.
-- Components query `frame.stateFor(action, value)` while painting, so touch-down highlight and focus states render correctly without any per-activity code.
+All of these paths route input through the same SDK interaction table, so touch and physical buttons fire the same actions with no per-screen coordinate code.
 
-You get touch, hold highlighting, long-press, minimum touch-target sizing, and orientation-aware coordinates for free. The same action IDs fire from physical buttons, so one code path serves both input styles.
+## The hosting stack
+
+`UiAppHost` ([src/components/UiAppHost.h](../../src/components/UiAppHost.h)) owns what every FUI screen shares: the font-bound render target, the `FreeInkApp`, and the `uiReady` handshake that lets the loop task route touch snapshots against the interaction table the render task rebuilds. Never re-implement that handshake; it is a cross-task protocol and lives in exactly one place.
+
+`UiListActivity` ([src/activities/UiListActivity.h](../../src/activities/UiListActivity.h)) layers the list protocol on top: swipes scroll the viewport without moving the selection, buttons move the selection and pull the viewport along (`fui::ListNav`), plus the render skeleton (header chrome, app, footer hints). `UiTabListActivity` is the tab-bar sibling; its selection ring puts the tab bar at position 0 and the rows after it.
+
+### New list screen skeleton
+
+Subclasses supply the data; the base owns the loop. The whole contract:
+
+```cpp
+class MyListActivity final : public UiListActivity {
+ public:
+  MyListActivity(GfxRenderer& r, MappedInputManager& in) : UiListActivity("MyList", r, in) {}
+
+ private:
+  std::vector<Entry> entries;       // the activity's data, loaded in onEnter
+  std::vector<fui::ListItem> rows;  // activity-owned row cache: rebuilt only when entries changes, reused every render
+
+  int listCount() const override { return entries.size(); }
+  const char* headerTitle() const override { return tr(STR_MY_TITLE); }
+
+  void onEnter() override {
+    UiListActivity::onEnter();
+    entries = /* ... load from wherever ... */;
+    rebuildRows();
+  }
+
+  // Called whenever entries changes (here, only onEnter; a mutable list would
+  // also call this after any add/remove). NOT called from buildScreen().
+  void rebuildRows() {
+    rows.clear();
+    rows.reserve(entries.size());
+    // ... one fui::ListItem per entry (label, actionValue = index) ...
+  }
+
+  void buildScreen(UiScreen& screen) override {
+    // set content margin from the theme safe area, then:
+    fui::ListProps props;
+    props.items = rows.data();
+    props.count = rows.size();
+    props.action = ACTION_ROW;
+    props.inputMask = fui::InputTouch;  // physical buttons stay in the base loop
+    syncListViewport(screen, props);    // selection/viewport handoff, always right before list()
+    screen.list(props);
+  }
+
+  void activateIndex(int index) override {
+    app.clearTapFlash();  // leaving the screen: a lingering flash would gray the next render
+    // ... open the thing ...
+  }
+};
+```
+
+See [`FileBrowserActivity`](../../src/activities/home/FileBrowserActivity.cpp)'s `rebuildRowItems()` for this pattern applied to a directory listing that can run into the hundreds of entries, and `LanguageSelectActivity.cpp` for the rest of the skeleton (content-margin math, footer, etc.) — note that file still builds its row vector locally inside `buildScreen()`; match `FileBrowserActivity`, not that file, for the row cache. Optional overrides: `onRowLongPress(index)`, `drawFooter()`, `handleButtons()` for extra physical-button handling, and `ACTION_USER`-and-up action ids for non-row elements (register handlers in `onEnter` after the base's).
+
+### Rules that apply to every FUI screen
+
+- Register actions with `app.on(...)` in `onEnter` (after `resetUi()` for direct `UiAppHost` users). Handlers receive a `void* user` you cast back to the activity.
+- Handlers that leave the current screen call `app.clearTapFlash()` first.
+- Theme tokens are shared and bound by `resetUi()`; never call `app.setTheme` yourself. Metrics flow from the active UITheme through [`UIThemeTokens.h`](../../src/components/UIThemeTokens.h), including the per-board bezel insets that keep scrollbars visible.
+- `TextStyle.maxLines` defaults to 1 and truncates with an ellipsis. Set `maxLines` explicitly on any dialog headline or message that can wrap.
+- Everything stays allocation-free in steady state. A local `std::vector` inside `buildScreen()` is **not** allocation-free even with `reserve()` first: it starts at zero capacity on every call, `reserve()` allocates, and the destructor frees that storage before the call returns — real allocator work and fragmentation risk on every repaint (cursor move, tap flash, ...), not just on data changes. Build `ListItem` rows into activity-owned storage instead, reserved once when the underlying data loads (`onEnter()`/a `load*()` — see the skeleton above and `FileBrowserActivity::rebuildRowItems()`), and reused unchanged by every `buildScreen()` call. Use a fixed-capacity array (e.g. `ListItem rows[MAX]`, as `OptionPopup` and `KOReaderSyncActivity`'s action rows do) when the count is small and bounded. Do not hold FUI `props` across renders — only the row storage they point into.
 
 ### Component inventory
 
@@ -33,106 +98,11 @@ All under `freeink-sdk/libs/ui/FreeInkUI/include/components/`:
 | Media | `book-card`, `cover-grid`, `cover-carousel`, `metric-card` |
 | Text | `text-field`, `text-area` |
 
-### Integration skeleton
-
-The in-tree reference is [`src/activities/util/KeyboardEntryActivity.cpp`](../../src/activities/util/KeyboardEntryActivity.cpp); it drives the FreeInkUI keyboard component inside a normal Activity. The shape:
-
-```cpp
-#include <FreeInkUIGfxRenderer.h>
-namespace fui = freeink::ui;
-
-// Render step: draw the component and (re)register its hit rects.
-fui::GfxRendererTarget target(renderer);           // adapts GfxRenderer to FreeInkUI's DrawTarget
-target.setFont(fui::GfxRendererTarget::FONT_BODY, UI_12_FONT_ID);
-const fui::DeviceContext device = target.deviceContext();  // orientation, safe area, touch sizing
-
-fui::Frame<48> frame(target, device, fui::InputSnapshot{}, interactions);  // 48 = max hit rects
-fui::KeyboardProps props;
-props.layout = &currentLayout();
-props.keyAction = ACTION_KEY;                      // one action id; the key is the event value
-props.inputMask = fui::InputTouch | fui::InputLongPress;
-fui::keyboard(frame, kbRect, props);               // draws AND registers hit rects
-```
-
-```cpp
-// Input step (each loop): feed touch state, act on routed events.
-int tx, ty, tapX, tapY, hx, hy;
-const bool pressedDown = mappedInput.wasScreenTouchDown(tx, ty);
-const bool tapped      = mappedInput.wasScreenTapped(tapX, tapY);
-const bool inContact   = mappedInput.isScreenTouchHeld(hx, hy);
-
-const auto result = touchRouter.update(interactions, pressedDown, tx, ty,
-                                       tapped, tapX, tapY, inContact, millis());
-if (result.event) {
-  activateValue(result.event.value, result.event.longPress);
-  requestUpdate();
-} else if (result.activeChanged) {
-  requestUpdate();  // repaint touch-down highlight
-}
-```
-
-Notes:
-
-- `Frame<N>` is templated on the max number of hit rects; the buffer is stack/static, no heap.
-- `fui::TouchHoldRouter` (see `components/keyboard/keyboard.h`) synthesizes long-press while the finger is still down and swallows the eventual release. Use it whenever a component distinguishes tap from long-press.
-- For simpler screens without long-press, `FreeInkApp` / `Screen<N>` (`FreeInkApp.h`) is the ergonomic layer: it owns the interaction buffer, offers a top-to-bottom builder (`takeTop`, footer helpers, etc.), and its `render(input)` call routes the snapshot and dispatches registered action callbacks in one step. `snapshotFrom(input, device)` in `FreeInkUIInputManager.h` builds the `InputSnapshot` with orientation-aware touch mapping.
-- Everything stays allocation-free and works on the button-only devices unchanged: physical buttons route through the same interaction table via each hit rect's `inputMask`.
+One exception to "always go through a host": `KeyboardEntryActivity` drives the keyboard component with a raw `fui::Frame` and `TouchHoldRouter` because per-key hold repeat needs its own routing. If you think your screen needs that, raise it in the PR first.
 
 ---
 
-## Path 2: Adding touch to existing hand-rolled screens
-
-For activities that draw their own rows, menus, and buttons, `MappedInputManager` ([src/MappedInputManager.h](../../src/MappedInputManager.h)) exposes bridge helpers. They all return **logical screen coordinates** (orientation already applied via `GfxRenderer::tapToLogical`); never touch raw normalized panel coordinates or the SDK `InputManager` directly.
-
-| Helper | Use for |
-|---|---|
-| `wasScreenTapped(x, y)` | A completed tap (press + release), with logical coords |
-| `wasScreenTouchDown(x, y)` | Touch-down (held > 90 ms, not yet released): draw selection highlight |
-| `isScreenTouchHeld(x, y)` | Live contact position while the finger is down (drag tracking) |
-| `wasTapInRect(x, y, w, h)` | One-off hit test on a rectangle (a single button, a banner) |
-| `wasListItemTapped(index, count, selected, listTop, listHeight, hasSubtitle)` | Taps on a standard UITheme list; does the row/paging math for you |
-| `wasListItemTouchedDown(...)` | Same geometry, touch-down phase (highlight before activate) |
-| `rowTouch(row, top, rowStep, rowCount, xStart, xEnd, rowHeight)` | Any custom band of equal-height rows; returns `RowTouch::None/Down/Tap` |
-| `colTouch(col, left, colStep, colCount, yStart, yEnd, colWidth)` | Horizontal button bands (dialogs, prompts) |
-| `wasSwipe()` | Raw swipe direction if you need one beyond the global gestures |
-| `hasTouch()` | True when the device has a touch panel (rarely needed; helpers simply never fire without one) |
-
-### Pattern A: standard themed list
-
-One call per loop; UITheme owns the row geometry ([EpubReaderBookmarksActivity.cpp:123](../../src/activities/reader/EpubReaderBookmarksActivity.cpp)):
-
-```cpp
-int tapped = -1;
-if (mappedInput.wasListItemTapped(tapped, bookmarks.size(), selectorIndex, listY, listHeight, true)) {
-  selectorIndex = tapped;
-  openBookmark();
-  return;
-}
-```
-
-### Pattern B: custom rows with hold highlight
-
-For non-theme row layouts, use `rowTouch` and distinguish `Down` (highlight) from `Tap` (activate), as in [EpubReaderFootnotesActivity.cpp](../../src/activities/reader/EpubReaderFootnotesActivity.cpp):
-
-```cpp
-int row = -1;
-const auto touch = mappedInput.rowTouch(row, listTop, lineHeight, visibleCount,
-                                        contentX, contentX + contentWidth);
-if (touch != MappedInputManager::RowTouch::None) {
-  const int touched = scrollOffset + row;
-  if (touch == MappedInputManager::RowTouch::Down) {
-    if (selectedIndex != touched) { selectedIndex = touched; requestUpdate(); }
-  } else {  // RowTouch::Tap
-    selectedIndex = touched;
-    activateSelection();
-  }
-  return;
-}
-```
-
-The `Down` state exists because e-ink repaints are slow: highlight on touch-down gives immediate feedback, activation happens on release.
-
-### Global gestures: do not reimplement these
+## Global gestures: do not reimplement these
 
 Three gestures are handled once, for every screen. Activities must not add their own edge-swipe handling:
 
@@ -142,14 +112,25 @@ Three gestures are handled once, for every screen. Activities must not add their
 | Home | Up-swipe starting in the bottom 14% | `ActivityManager::loop()`; pops to Home (activities can override via `handleHomeGesture()`) |
 | Menu | Down-swipe starting in the top 14% | Activities that have a menu check `wasMenuGesture()` themselves (the reader does this) |
 
-Because the back gesture arrives as `Button::Back`, most button-era activities gain back-swipe support with zero changes. That is the bar to aim for: bridge helpers should make touch an additive layer over the button flow, not a second input state machine.
+Because the back gesture arrives as `Button::Back`, most button-era activities gain back-swipe support with zero changes.
 
-### Bridge rules
+---
 
-- Handle touch in `loop()` next to the existing button handling, one helper call per interaction zone, and `return` after consuming an event (mirrors the button pattern).
-- Never call the SDK `InputManager` or read GPIO directly; the HAL rule from the main guide applies to touch too.
-- Coordinates from the helpers are logical and orientation-correct on all four rotations; test at least Portrait and one Landscape mode before PR.
-- Nothing to clean up in `onExit()`; the helpers are stateless from the activity's point of view.
+## Legacy bridge helpers (do not use in new code)
+
+`MappedInputManager` still exposes raw touch accessors. The FUI stack consumes them internally (via `touchSnapshotFrom` in [`UiAppHelpers.h`](../../src/components/UiAppHelpers.h)); activities should not.
+
+| Helper | Status |
+|---|---|
+| `wasScreenTapped` / `wasScreenTouchDown` / `isScreenTouchHeld` | Consumed by the FUI snapshot builder. Direct use only in the two legacy surfaces |
+| `wasTapInRect(x, y, w, h)` | Legacy one-off hit test |
+| `rowTouch` / `colTouch` | Legacy row/column band math. Sole remaining user: `HomeActivity` (theme-driven layout) |
+| `wasSwipe()` | Raw swipe direction, for behavior beyond the global gestures (reader page turns) |
+| `hasTouch()` | Still fine anywhere: gate touch-only chrome (on-screen Cancel/OK pairs) on it |
+
+The `wasListItemTapped` / `wasListItemTouchedDown` helpers from the button-era bridge have been removed; every themed list is a `UiListActivity` now. If you are porting a branch that still calls them, convert the screen to `UiListActivity` rather than resurrecting the helpers.
+
+As with all input: never call the SDK `InputManager` or read GPIO directly. The HAL rule from the main guide applies to touch too.
 
 ---
 

docs/dictionary.md

@@ -13,7 +13,7 @@ A dictionary folder must contain:
 - `.syn` — synonym index (optional; maps alternate spellings and irregular forms to their headword)
 - `.ifo` — metadata (optional)
 
-Not supported: dictionaries with 64-bit index offsets (`idxoffsetbits=64` in the `.ifo` — rare, and rejected with an error), and HTML-formatted definitions render as raw markup rather than styled text.
+Not supported: dictionaries with 64-bit index offsets (`idxoffsetbits=64` in the `.ifo` — rare, and rejected with an error).
 
 ## Setting Up a Dictionary
 
@@ -49,6 +49,8 @@ On the very first lookup with a dictionary (and again whenever the `.idx` or `.s
 
 When a word is found, the definition screen shows the matched headword at the top and the definition text below, with a page counter for long definitions.
 
+HTML dictionaries that declare `sametypesequence=h` use the EPUB text-layout engine for semantic formatting such as headings, bold, italics, lists, and line breaks. Images and CSS styling are ignored. Definitions that are too large or cannot be laid out within the available memory fall back to plain text.
+
 - **Left/Right** or side **Up/Down** — previous / next page
 - **Back** — return to word selection
 

lib/GfxRenderer/GfxRenderer.cpp

@@ -1,6 +1,7 @@
 #include "GfxRenderer.h"
 
 #include <BidiUtils.h>
+#include <BoardConfig.h>
 #include <BuildScratch.h>
 #include <FontDecompressor.h>
 #include <HalGPIO.h>
@@ -726,11 +727,14 @@ void GfxRenderer::drawRect(const int x, const int y, const int width, const int
 // Border is inside the rectangle
 void GfxRenderer::drawRect(const int x, const int y, const int width, const int height, const int lineWidth,
                            const bool state) const {
+  // Keep the border inside [x, x+width) like the thin overload: the previous
+  // right/bottom edges at x+width / y+height sat one pixel outside the rect,
+  // so stroked boxes looked shifted against fills computed from the rect.
   for (int i = 0; i < lineWidth; i++) {
-    drawLine(x + i, y + i, x + width - i, y + i, state);
-    drawLine(x + width - i, y + i, x + width - i, y + height - i, state);
-    drawLine(x + width - i, y + height - i, x + i, y + height - i, state);
-    drawLine(x + i, y + height - i, x + i, y + i, state);
+    drawLine(x + i, y + i, x + width - 1 - i, y + i, state);
+    drawLine(x + width - 1 - i, y + i, x + width - 1 - i, y + height - 1 - i, state);
+    drawLine(x + width - 1 - i, y + height - 1 - i, x + i, y + height - 1 - i, state);
+    drawLine(x + i, y + height - 1 - i, x + i, y + i, state);
   }
 }
 
@@ -2134,6 +2138,8 @@ void GfxRenderer::writeGrayscalePlaneStrip(bool lsbPlane, const uint8_t* scratch
 
 bool GfxRenderer::supportsStripGrayscale() const { return display.supportsStripGrayscale(); }
 
+bool GfxRenderer::combinesGrayscaleBase() const { return display.combinesGrayscaleBase(); }
+
 void GfxRenderer::freeBwBufferChunks() {
   for (auto& bwBufferChunk : bwBufferChunks) {
     if (bwBufferChunk) {
@@ -2220,30 +2226,33 @@ void GfxRenderer::cleanupGrayscaleWithFrameBuffer() const {
 }
 
 void GfxRenderer::getOrientedViewableTRBL(int* outTop, int* outRight, int* outBottom, int* outLeft) const {
+  // Board truth: the bezel insets live in the active profile (panel-native
+  // portrait frame); this only rotates them into the current orientation.
+  const BoardConfig::ViewableInsets& vi = BoardConfig::ACTIVE.viewableInsets;
   switch (orientation) {
     case Portrait:
-      *outTop = VIEWABLE_MARGIN_TOP;
-      *outRight = VIEWABLE_MARGIN_RIGHT;
-      *outBottom = VIEWABLE_MARGIN_BOTTOM;
-      *outLeft = VIEWABLE_MARGIN_LEFT;
+      *outTop = vi.top;
+      *outRight = vi.right;
+      *outBottom = vi.bottom;
+      *outLeft = vi.left;
       break;
     case LandscapeClockwise:
-      *outTop = VIEWABLE_MARGIN_LEFT;
-      *outRight = VIEWABLE_MARGIN_TOP;
-      *outBottom = VIEWABLE_MARGIN_RIGHT;
-      *outLeft = VIEWABLE_MARGIN_BOTTOM;
+      *outTop = vi.left;
+      *outRight = vi.top;
+      *outBottom = vi.right;
+      *outLeft = vi.bottom;
       break;
     case PortraitInverted:
-      *outTop = VIEWABLE_MARGIN_BOTTOM;
-      *outRight = VIEWABLE_MARGIN_LEFT;
-      *outBottom = VIEWABLE_MARGIN_TOP;
-      *outLeft = VIEWABLE_MARGIN_RIGHT;
+      *outTop = vi.bottom;
+      *outRight = vi.left;
+      *outBottom = vi.top;
+      *outLeft = vi.right;
       break;
     case LandscapeCounterClockwise:
-      *outTop = VIEWABLE_MARGIN_RIGHT;
-      *outRight = VIEWABLE_MARGIN_BOTTOM;
-      *outBottom = VIEWABLE_MARGIN_LEFT;
-      *outLeft = VIEWABLE_MARGIN_TOP;
+      *outTop = vi.right;
+      *outRight = vi.bottom;
+      *outBottom = vi.left;
+      *outLeft = vi.top;
       break;
   }
 }

lib/GfxRenderer/GfxRenderer.h

@@ -109,11 +109,6 @@ class GfxRenderer {
       : display(halDisplay), renderMode(BW), orientation(Portrait), fadingFix(false) {}
   ~GfxRenderer() { freeBwBufferChunks(); }
 
-  static constexpr int VIEWABLE_MARGIN_TOP = 9;
-  static constexpr int VIEWABLE_MARGIN_RIGHT = 3;
-  static constexpr int VIEWABLE_MARGIN_BOTTOM = 3;
-  static constexpr int VIEWABLE_MARGIN_LEFT = 3;
-
   // Setup
   void begin();  // must be called right after display.begin()
   void insertFont(int fontId, EpdFontFamily font);
@@ -298,6 +293,9 @@ class GfxRenderer {
   // numRows)), bypassing the framebuffer. supportsStripGrayscale() gates use.
   void writeGrayscalePlaneStrip(bool lsbPlane, const uint8_t* scratch, int yStart, int numRows) const;
   bool supportsStripGrayscale() const;
+  // Paper Mono: the base activation is deferred so base + gray planes go out
+  // as one waveform. Route the base through displayGrayscaleBase() when true.
+  bool combinesGrayscaleBase() const;
   bool storeBwBuffer();    // Returns true if buffer was stored successfully
   void restoreBwBuffer();  // Restore and free the stored buffer
   void cleanupGrayscaleWithFrameBuffer() const;

lib/I18n/translations/catalan.yaml

@@ -278,6 +278,7 @@ STR_BOOKMARK_REMOVED: "S'ha eliminat el punt de llibre."
 STR_OPDS_BROWSER: "Navegador OPDS"
 STR_COVER_CUSTOM: "Portada + Personalitzat"
 STR_QUICK_RESUME: "Represa ràpida"
+STR_TRANSPARENT: "Transparent"
 STR_MENU_RECENT_BOOKS: "Llibres recents"
 STR_REMOVE_FROM_RECENTS: "Vols suprimir-lo de Llibres recents?"
 STR_NO_RECENT_BOOKS: "No hi ha llibres recents"

lib/I18n/translations/english.yaml

@@ -95,6 +95,7 @@ STR_SHORT_PWR_BTN: "Short Power Button Click"
 STR_ORIENTATION: "Reading Orientation"
 STR_SIDE_BTN_LAYOUT: "Side Button Layout (reader)"
 STR_TOUCH_READER_CONTROLS: "Touch Reader Controls"
+STR_TAP_FOR_READER_MENU: "Tap For Reader Menu"
 STR_FRONT_BTN_FOLLOW_ORIENTATION: "Orient front buttons"
 STR_LONG_PRESS_BEHAVIOR: "Long-press button behavior"
 STR_LONG_PRESS_BEHAVIOR_OFF: "OFF"
@@ -184,6 +185,7 @@ STR_NEXT_PREV: "Next/Prev"
 STR_KOSYNC: "KOSync"
 STR_BOOKMARK_OPTION: "Bookmark"
 STR_DICTIONARY: "Dictionary"
+STR_READER_MENU: "Reader Menu"
 STR_DISABLED: "Disabled"
 STR_NOTO_SERIF: "Noto Serif"
 STR_NOTO_SANS: "Noto Sans"
@@ -247,6 +249,13 @@ STR_SHOW: "Show"
 STR_HIDE: "Hide"
 STR_STATE_ON: "ON"
 STR_STATE_OFF: "OFF"
+STR_STATE_TAP: "Tap"
+STR_STATE_SWIPE: "Swipe"
+STR_STATE_INVERTED_TAP: "Inverted Tap"
+STR_FRONTLIGHT: "Frontlight"
+STR_BRIGHTNESS: "Brightness"
+STR_WARMTH: "Warmth"
+STR_RESTORE_LIGHT_ON_WAKE: "Restore Light on Wake"
 STR_NOT_SET: "Not Set"
 STR_DIR_LEFT: "Left"
 STR_DIR_RIGHT: "Right"
@@ -299,12 +308,14 @@ STR_THEME_LYRA_EXTENDED: "Lyra Extended"
 STR_SUNLIGHT_FADING_FIX: "Sunlight Fading Fix"
 STR_REMAP_FRONT_BUTTONS: "Remap Front Buttons"
 STR_BOOKMARKS: "Bookmarks"
+STR_NO_BOOKMARKS: "No bookmarks"
 STR_BOOKMARK_ADDED: "Bookmark added."
 STR_BOOKMARK_REMOVED: "Bookmark removed."
 STR_OPDS_BROWSER: "OPDS Browser"
 STR_SEARCH: "Search"
 STR_COVER_CUSTOM: "Cover + Custom"
 STR_QUICK_RESUME: "Quick Resume"
+STR_TRANSPARENT: "Transparent"
 STR_MENU_RECENT_BOOKS: "Recent Books"
 STR_REMOVE_FROM_RECENTS: "Remove from Recent Books?"
 STR_NO_RECENT_BOOKS: "No recent books"

lib/I18n/translations/orangutan.yaml

@@ -0,0 +1,328 @@
+_language_name: "Orangutan"
+_language_code: "OOK"
+_order: "34"
+
+STR_CROSSPOINT: "CrossPoint"
+STR_BOOTING: "OOK"
+STR_SLEEPING: "Oooook"
+STR_ENTERING_SLEEP: "Ook..."
+STR_BROWSE_FILES: "Ook? OOK"
+STR_FILE_TRANSFER: "Oook!"
+STR_SETTINGS_TITLE: "OOK!"
+STR_CONTINUE_READING: "Oooook ook"
+STR_RESUME: "OOk!"
+STR_NO_OPEN_BOOK: "OOK?"
+STR_START_READING: "Ook ook"
+STR_NO_FILES_FOUND: "Oook?"
+STR_SELECT_CHAPTER: "Ook? Oook OOK!"
+STR_NO_CHAPTERS: "Ook..."
+STR_END_OF_BOOK: "Oooook."
+STR_EMPTY_CHAPTER: "OOk?"
+STR_INDEXING: "Oook..."
+STR_LOADING: "Ooook..."
+STR_LOADING_POPUP: "Oook"
+STR_LOOKUP: "Ook? Oook! OOK"
+STR_WIFI_NETWORKS: "Wi-Fi OOK"
+STR_NO_NETWORKS: "Oook?"
+STR_NETWORKS_FOUND: "%zu OOK"
+STR_SCANNING: "Oook..."
+STR_FINDING_SAVED_WIFI: "Oook Wi-Fi..."
+STR_CONNECTING: "Ooook..."
+STR_CONNECTING_SAVED_WIFI: "OOk Wi-Fi..."
+STR_SHOW_NETWORKS: "OOK"
+STR_CONNECTED: "Oook!"
+STR_CONNECTION_FAILED: "OOk?"
+STR_FORGET_NETWORK: "Oook?"
+STR_SAVE_PASSWORD: "OOK?"
+STR_PRESS_OK_SCAN: "OOk OK"
+STR_JOIN_NETWORK: "Oook!"
+STR_CREATE_HOTSPOT: "Ooook"
+STR_JOIN_DESC: "Oook Wi-Fi"
+STR_HOTSPOT_DESC: "Oooook Wi-Fi"
+STR_STARTING_HOTSPOT: "Ooook..."
+STR_HOTSPOT_MODE: "OOk!"
+STR_CONNECT_WIFI_HINT: "Oook Wi-Fi"
+STR_OPEN_URL_HINT: "Oook URL"
+STR_SCAN_QR_HINT: "Oook QR:"
+STR_CALIBRE_WIRELESS: "Calibre OOK"
+STR_NETWORK_LEGEND: "* = OOK | + = OOk"
+STR_MAC_ADDRESS: "MAC!"
+STR_CHECKING_WIFI: "OOk Wi-Fi..."
+STR_ENTER_WIFI_PASSWORD: "Oook Wi-Fi"
+STR_ADD_HIDDEN_NETWORK: "Oook..."
+STR_ENTER_WIFI_SSID: "OOk (SSID)"
+STR_TO_PREFIX: "Oo "
+STR_CALIBRE_RECEIVING: "Oook: "
+STR_CALIBRE_RECEIVED: "OOK!: "
+STR_CAT_DISPLAY: "OOK"
+STR_CAT_READER: "OOk"
+STR_CAT_CONTROLS: "Ook!"
+STR_CAT_SYSTEM: "Oook"
+STR_SLEEP_SCREEN: "Oooook"
+STR_NIGHT_MODE: "Ook!"
+STR_QUICK_RESUME_TIMEOUT: "Oook ook"
+STR_SLEEP_COVER_MODE: "Ook ook"
+STR_HIDE_BATTERY: "OOk %"
+STR_EXTRA_SPACING: "Oook ook"
+STR_TEXT_AA: "Ook-ook"
+STR_IMAGES: "OOk!"
+STR_IMAGES_DISPLAY: "Oook"
+STR_IMAGES_PLACEHOLDER: "Ooook"
+STR_IMAGES_SUPPRESS: "OOK"
+STR_EOB_HOME: "Oook"
+STR_EOB_CONTINUE_WITH: "Oook ook"
+STR_SHORT_PWR_BTN: "Oooook OOK"
+STR_ORIENTATION: "Ook? Oooook OOK"
+STR_SIDE_BTN_LAYOUT: "Oook ook"
+STR_TOUCH_READER_CONTROLS: "OOk! OOK"
+STR_FRONT_BTN_FOLLOW_ORIENTATION: "Oook OOK"
+STR_LONG_PRESS_BEHAVIOR: "Oooook OOK"
+STR_LONG_PRESS_BEHAVIOR_OFF: "OFF"
+STR_LONG_PRESS_BEHAVIOR_SKIP: "Oook!"
+STR_LONG_PRESS_BEHAVIOR_ORIENTATION: "Ook? OOK"
+STR_LONG_PRESS_MENU: "Oooook!"
+STR_FONT_PREVIEW_TEXT: "Ook ook ook."
+STR_FONT_FAMILY: "Oook OOK"
+STR_FONT_SIZE: "OOk OOK"
+STR_TEXT_SETTINGS: "Oooook OOK: Ook!"
+STR_FONT: "OOk!"
+STR_SIZE: "OOK"
+STR_LAYOUT: "Oook"
+STR_ALIGNMENT: "Oooook"
+STR_STYLE: "OOk!"
+STR_NOT_IN_PREVIEW: "Oook?"
+STR_LINE_SPACING: "Oook ook"
+STR_SCREEN_MARGIN: "OOk ook"
+STR_PARA_ALIGNMENT: "Ook OOK"
+STR_HYPHENATION: "Ooook"
+STR_TIME_TO_SLEEP: "Oook..."
+STR_SHOW_HIDDEN_FILES: "OOk?"
+STR_REMOVE_READ_FROM_RECENTS: "Oook OOK"
+STR_MOVE_FINISHED_TO_READ: "Ook! OOK"
+STR_REFRESH_FREQ: "Oook!"
+STR_KOREADER_SYNC: "KOReader OOK"
+STR_CHECK_UPDATES: "Oook!"
+STR_LANGUAGE: "OOk?"
+STR_CLEAR_READING_CACHE: "Oook OOK"
+STR_USERNAME: "Oook"
+STR_PASSWORD: "OOk!"
+STR_SYNC_SERVER_URL: "Oook URL"
+STR_DOCUMENT_MATCHING: "Oook OOK"
+STR_SEND_METADATA: "Ook! OOK"
+STR_SYNC_BEHAVIOR: "OOk ook"
+STR_ASK_EVERY_TIME: "Oook?"
+STR_SMART_SYNC: "Oook!"
+STR_AUTHENTICATE: "Oooook"
+STR_SIGN_UP: "OOk!"
+STR_KOREADER_USERNAME: "KOReader OOK"
+STR_KOREADER_PASSWORD: "KOReader OOk"
+STR_FILENAME: "Oook"
+STR_KOREADER_AUTH: "KOReader OOK"
+STR_DONE: "Oook"
+STR_DARK: "OOk!"
+STR_LIGHT: "Oook"
+STR_CUSTOM: "Ooook"
+STR_COVER: "OOk?"
+STR_NONE_OPT: "OOk!"
+STR_FIT: "OOk"
+STR_CROP: "OOK!"
+STR_NEVER: "Oook!"
+STR_IN_READER: "Ook? OOK"
+STR_ALWAYS: "Oooook"
+STR_IGNORE: "OOk?"
+STR_SLEEP: "Oook!"
+STR_PAGE_TURN: "Oook OOK"
+STR_FORCE_REFRESH: "Ook! OOK"
+STR_PORTRAIT: "Oook"
+STR_LANDSCAPE_CW: "Oook OOK"
+STR_INVERTED: "OOk!"
+STR_ORIENTATION_INVERTED: "Ook 180°"
+STR_LANDSCAPE_CCW: "OOk OOK"
+STR_PREV_NEXT: "OOk/OOK"
+STR_NEXT_PREV: "OOK/OOk"
+STR_KOSYNC: "KOSync"
+STR_BOOKMARK_OPTION: "Oook!"
+STR_DICTIONARY: "Oooook"
+STR_DISABLED: "OOk!"
+STR_NOTO_SERIF: "Noto OOK"
+STR_NOTO_SANS: "Noto OOk"
+STR_TIGHT: "OOk!"
+STR_NORMAL: "Oook"
+STR_WIDE: "OOk!"
+STR_JUSTIFY: "Ooook!"
+STR_ALIGN_LEFT: "OOk"
+STR_CENTER: "Oook"
+STR_ALIGN_RIGHT: "OOK!"
+STR_PAGES_1: "1 OOK"
+STR_PAGES_5: "5 OOk"
+STR_PAGES_10: "10 OOK"
+STR_PAGES_15: "15 OOk"
+STR_PAGES_30: "30 OooK"
+
+STR_UPDATE: "Oook!"
+STR_CURRENT_VERSION: "OOK: "
+STR_NEW_VERSION: "OOk: "
+STR_DOWNLOADING: "Oooook..."
+STR_UNNAMED: "OOk?"
+STR_HOLD_OPEN_TO_DELETE: "Oook OOK"
+STR_NEXT_PAGE: "OOk »"
+STR_PREV_PAGE: "« OOK"
+STR_NETWORK_PREFIX: "OOk: "
+STR_IP_ADDRESS_PREFIX: "IP: "
+STR_SD_CARD: "SD OOK"
+STR_BACK: "« OOK"
+STR_EXIT: "« OOk"
+STR_HOME: "« Oook"
+STR_SELECT: "OOk!"
+STR_SELECTED: "Oooook"
+STR_TOGGLE: "Oook!"
+STR_TOGGLE_BOOKMARK: "Ook? OOK! Oooook"
+STR_CONFIRM: "Oooook"
+STR_CANCEL: "OOk?"
+STR_CONNECT: "Oooook"
+STR_OPEN: "Oook"
+STR_DOWNLOAD: "Oooook"
+STR_RETRY: "Oook!"
+STR_YES: "OOk"
+STR_NO: "Oo"
+STR_SHOW: "Oook"
+STR_HIDE: "OOk!"
+STR_STATE_ON: "OK"
+STR_STATE_OFF: "OOk"
+STR_NOT_SET: "Oook"
+STR_DIR_LEFT: "OOk!"
+STR_DIR_RIGHT: "OOK!"
+STR_DIR_UP: "OK"
+STR_DIR_DOWN: "OOk!"
+STR_OK_BUTTON: "OK"
+STR_KEY_SHIFT: "OOk!"
+STR_KEY_MODE_SYMBOLS: "?123"
+STR_KEY_MODE_ABC: "abc"
+
+STR_SLEEP_COVER_FILTER: "Oook OOK"
+STR_FILTER_CONTRAST: "Oooook"
+STR_CUSTOMISE_STATUS_BAR: "Oook OOK"
+STR_CHAPTER_PAGE_COUNT: "OOk OOK"
+STR_BOOK_PROGRESS_PERCENTAGE: "Oook OOK"
+STR_PROGRESS_BAR: "Oook OOK"
+STR_PROGRESS_BAR_THICKNESS: "Oook OOK"
+STR_PROGRESS_BAR_THIN: "OOk!"
+STR_PROGRESS_BAR_MEDIUM: "Oook"
+STR_PROGRESS_BAR_THICK: "Oook!"
+STR_BOOK: "Oook"
+STR_CHAPTER: "OOk!"
+STR_EXAMPLE_CHAPTER: "OOk 21"
+STR_EXAMPLE_BOOK: "Oook OOK"
+STR_PREVIEW: "Oook!"
+STR_TITLE: "OOk?"
+STR_BATTERY: "Oook"
+STR_XTC_STATUS_BAR: "XTC OOK"
+STR_BOTTOM: "Oooook"
+STR_TOP: "OOk"
+STR_CLOCK: "Oook!"
+STR_CLOCK_UTC_OFFSET: "Oook OOK"
+STR_CLOCK_FORMAT: "OOk OOK"
+STR_CLOCK_FORMAT_24H: "24-OOK"
+STR_CLOCK_FORMAT_12H: "12-OOk"
+STR_CURRENT_TIME: "OOk:"
+STR_NEXT_FIELD: "Oook"
+STR_CLOCK_SYNC: "OOk OOK"
+STR_CLOCK_SYNC_NOW: "Oook OOK"
+STR_CLOCK_SYNCING: "Oooook..."
+STR_CLOCK_SYNC_OK: "Oook!"
+STR_CLOCK_SYNC_FAIL: "OOk?"
+STR_CLOCK_SYNC_NO_WIFI: "Wi-Fi OOK"
+STR_CLOCK_SYNCED: "Oooook"
+STR_UI_THEME: "OOk OOK"
+STR_THEME_CLASSIC: "Oook!"
+STR_THEME_LYRA: "OOk!"
+STR_THEME_ROUNDEDRAFF: "Oook"
+STR_THEME_LYRA_EXTENDED: "Oook OOK"
+STR_SUNLIGHT_FADING_FIX: "Oook OOK"
+STR_REMAP_FRONT_BUTTONS: "Oook OOK"
+
+STR_BOOKMARKS: "Ook! OOK Oooook"
+STR_NO_BOOKMARKS: "OOk?"
+STR_BOOKMARK_ADDED: "Ook!"
+STR_BOOKMARK_REMOVED: "Oook!"
+STR_OPDS_BROWSER: "OPDS OOK"
+STR_SEARCH: "Oook!"
+STR_COVER_CUSTOM: "OOk + OOK"
+STR_QUICK_RESUME: "Oook OOK"
+STR_MENU_RECENT_BOOKS: "Oook OOK"
+STR_REMOVE_FROM_RECENTS: "OOk?"
+STR_NO_RECENT_BOOKS: "Oook?"
+STR_CALIBRE_DESC: "Calibre OOK"
+STR_FORGET_AND_REMOVE: "Oook?"
+STR_FORGET_BUTTON: "Oook!"
+STR_CALIBRE_STARTING: "Calibre OOK"
+STR_CALIBRE_SETUP: "OOk!"
+STR_CALIBRE_STATUS: "Oook"
+STR_CLEAR_BUTTON: "Oook!"
+STR_DEFAULT_VALUE: "OOk OOK"
+STR_UNASSIGNED: "OOk?"
+STR_ALREADY_ASSIGNED: "Oook OOK"
+STR_GO_TO_PERCENT: "Oook! Ook? %"
+STR_GO_HOME_BUTTON: "Oook OOK! Oooook"
+STR_SYNC_PROGRESS: "Oooook OOK! Ook!"
+STR_DELETE_CACHE: "Oook OOK? Oooook!"
+STR_DELETE: "Oooook"
+STR_CONFIRM_DELETE_BOOKMARK: "Oook?"
+STR_DISPLAY_QR: "Oooook OOK QR!"
+STR_CHAPTER_PREFIX: "OOk: "
+STR_BOOK_PREFIX: "Oook: "
+STR_SYNCING_TIME: "Oook..."
+STR_FETCH_PROGRESS: "OOk..."
+STR_UPLOAD_PROGRESS: "Oooook..."
+STR_KOREADER_SETUP_HINT: "KOReader OOK"
+STR_PROGRESS_FOUND: "Oook!"
+STR_REMOTE_LABEL: "OOk:"
+STR_LOCAL_LABEL: "Oook:"
+STR_PAGE_OVERALL_FORMAT: "OOk %d, %.2f%%"
+STR_PAGE_TOTAL_OVERALL_FORMAT: "Oook %d/%d, %.2f%%"
+STR_DEVICE_FROM_FORMAT: "OOk: %s"
+STR_APPLY_REMOTE: "Oook OOK"
+STR_UPLOAD_LOCAL: "OOk OOK"
+STR_UPLOAD_PROMPT: "Oook?"
+STR_UPLOAD_SUCCESS: "Oooook!"
+STR_ALREADY_SYNCED: "Oook!"
+STR_SECTION_PREFIX: "OOk "
+STR_UPLOAD: "Oooook"
+STR_BOOK_S_STYLE: "Oook OOK"
+STR_EMBEDDED_STYLE: "OOk OOK"
+STR_FOCUS_READING: "Oook OOK"
+STR_OPDS_SERVER_URL: "OPDS OOK"
+STR_PWR_BTN_FOOTNOTE_BACK: "Oook OOK"
+STR_BACK_SHORT_TO_FILE_BROWSER: "OOk OOK"
+STR_SET_SLEEP_COVER: "Oook OOK"
+STR_FOOTNOTES: "Ook! Oook OOK"
+STR_NO_FOOTNOTES: "Oook?"
+STR_LINK: "[Ook]"
+STR_SCREENSHOT_BUTTON: "Oook! OOK? Ook!"
+STR_SLEEP_TIMER_VALUE_FORMAT: "%u OOK"
+STR_SLEEP_NEVER: "Oook!"
+STR_ADD_SERVER: "Oook!"
+STR_SERVER_NAME: "OOk OOK"
+STR_DELETE_SERVER: "Oook OOK"
+STR_OPDS_SERVERS: "OPDS OOK"
+STR_OPDS_DOWNLOAD_FOLDER: "Oook OOK"
+STR_OPDS_FILENAME_FORMAT: "OOk OOK"
+STR_FMT_AUTHOR_TITLE: "OOk - OOK"
+STR_FMT_TITLE_AUTHOR: "OOK - OOk"
+STR_FMT_TITLE: "Oook"
+STR_OPDS_SD_ROOT: "SD OOK"
+STR_AUTO_TURN_ENABLED: "OOk: "
+STR_AUTO_TURN_PAGES_PER_MIN: "Oooook OOK (Ook!)"
+STR_MANAGE_FONTS: "Oook OOK"
+STR_FONT_BROWSER: "OOk OOK"
+STR_LOADING_FONT_LIST: "Oooook..."
+STR_NO_FONTS_AVAILABLE: "Oook?"
+STR_FONT_INSTALLED: "Oook!"
+STR_INSTALLED: "OOk!"
+STR_DOWNLOAD_ALL: "Oook OOK"
+STR_UPDATE_ALL: "OOk OOK"
+STR_UPDATE_AVAILABLE: "Oook!"
+STR_TILT_PAGE_TURN: "Oook OOK"
+STR_SD_FIRMWARE_UPDATE: "SD Oooook Ooook Ooooook"
+STR_STEP_HINT_FRONT: "Ooook Ooooook:"
+STR_STEP_HINT_SIDE: "OOK Oook:"

lib/I18n/translations/spanish.yaml

@@ -303,6 +303,7 @@ STR_OPDS_BROWSER: "Navegador OPDS"
 STR_SEARCH: "Buscar"
 STR_COVER_CUSTOM: "Portada + Pers."
 STR_QUICK_RESUME: "Reanudación rápida"
+STR_TRANSPARENT: "Transparente"
 STR_MENU_RECENT_BOOKS: "Libros recientes"
 STR_REMOVE_FROM_RECENTS: "¿Eliminar de Libros recientes?"
 STR_NO_RECENT_BOOKS: "No hay libros recientes"

lib/I18n/translations/valencian.yaml

@@ -283,6 +283,7 @@ STR_BOOKMARK_REMOVED: "S'ha eliminat el punt de llibre."
 STR_OPDS_BROWSER: "Navegador OPDS"
 STR_COVER_CUSTOM: "Portada + Personalitzat"
 STR_QUICK_RESUME: "Represa ràpida"
+STR_TRANSPARENT: "Transparent"
 STR_MENU_RECENT_BOOKS: "Llibres recents"
 STR_REMOVE_FROM_RECENTS: "Vols eliminar-lo de Llibres recents?"
 STR_NO_RECENT_BOOKS: "No hi ha llibres recents"

lib/JsonParser/ReleaseJsonParser.cpp

@@ -16,9 +16,14 @@ void safeCopy(char* dst, size_t dstSize, const char* src, size_t srcLen) {
 ReleaseJsonParser::ReleaseJsonParser()
     : parser(JsonCallbacks{this, sOnKey, sOnString, sOnNumber, sOnBool, sOnNull, sOnObjectStart, sOnObjectEnd,
                            sOnArrayStart, sOnArrayEnd}) {
+  safeCopy(firmwareAssetName, sizeof(firmwareAssetName), "firmware.bin", sizeof("firmware.bin") - 1);
   reset();
 }
 
+void ReleaseJsonParser::setFirmwareAssetName(const char* name) {
+  safeCopy(firmwareAssetName, sizeof(firmwareAssetName), name, strlen(name));
+}
+
 void ReleaseJsonParser::reset() {
   parser.reset();
   position = Position::TOP_LEVEL;
@@ -44,7 +49,7 @@ const char* ReleaseJsonParser::getFirmwareUrl() const { return firmwareUrl; }
 size_t ReleaseJsonParser::getFirmwareSize() const { return firmwareSize; }
 
 void ReleaseJsonParser::commitAsset() {
-  if (strcmp(currentAssetName, "firmware.bin") == 0) {
+  if (strcmp(currentAssetName, firmwareAssetName) == 0) {
     memcpy(firmwareUrl, currentAssetUrl, sizeof(firmwareUrl));
     firmwareSize = currentAssetSize;
     firmwareFound = true;

lib/JsonParser/ReleaseJsonParser.h

@@ -15,6 +15,11 @@ class ReleaseJsonParser {
   void reset();
   void feed(const char* data, size_t len);
 
+  // Release-asset filename to match (default "firmware.bin"). Boards with
+  // their own release binaries pass e.g. "firmware-papermono.bin". Survives
+  // reset(); truncated silently if longer than the internal buffer.
+  void setFirmwareAssetName(const char* name);
+
   bool foundTag() const;
   bool foundFirmware() const;
   const char* getTagName() const;
@@ -65,4 +70,6 @@ class ReleaseJsonParser {
   char currentAssetName[32];
   char currentAssetUrl[512];
   size_t currentAssetSize;
+
+  char firmwareAssetName[32];
 };

lib/hal/HalDisplay.cpp

@@ -93,6 +93,10 @@ bool HalDisplay::isInverted() const { return einkDisplay.isInverted(); }
 
 void HalDisplay::deepSleep() { einkDisplay.deepSleep(); }
 
+void HalDisplay::setBusyWaitSliceHook(bool (*sliceHook)(int8_t busyPin, uint8_t busyLevel)) {
+  einkDisplay.setBusyWaitSliceHook(sliceHook);
+}
+
 uint8_t* HalDisplay::getFrameBuffer() const { return einkDisplay.getFrameBuffer(); }
 
 uint8_t* HalDisplay::lendFrameBufferStorage(uint32_t* sizeOut) { return einkDisplay.lendBuildStorage(sizeOut); }
@@ -139,6 +143,8 @@ void HalDisplay::writeGrayscalePlaneStrip(bool lsbPlane, const uint8_t* rows, ui
 
 bool HalDisplay::supportsStripGrayscale() const { return einkDisplay.supportsStripGrayscale(); }
 
+bool HalDisplay::combinesGrayscaleBase() const { return einkDisplay.combinesGrayscaleBase(); }
+
 uint16_t HalDisplay::getDisplayWidth() const { return einkDisplay.getDisplayWidth(); }
 
 uint16_t HalDisplay::getDisplayHeight() const { return einkDisplay.getDisplayHeight(); }