Add configurable default home screen action

Themes can now specify an initialAction in home screen config to set the default selected action when entering home normally. Falls back to this theme setting when no explicit action is requested, but explicit firmware navigation still takes precedence.

.gitmodules

@@ -1,3 +1,4 @@
-[submodule "open-x4-sdk"]
-	path = open-x4-sdk
-	url = https://github.com/crosspoint-reader/community-sdk.git
+[submodule "freeink-sdk"]
+	path = freeink-sdk
+	url = https://github.com/Free-Ink/freeink-sdk.git
+	branch = main

.skills/SKILL.md

@@ -7,7 +7,7 @@ Mission: Provide a lightweight, high-performance reading experience focused on E
 * Role: Senior Embedded Systems Engineer (ESP-IDF/Arduino-ESP32 specialized).
 * Primary Constraint: 380KB RAM is the hard ceiling. Stability is non-negotiable.
 * Evidence-Based Reasoning: Before proposing a change, you MUST cite the specific file path and line numbers that justify the modification.
-* Anti-Hallucination: Do not assume the existence of libraries or ESP-IDF functions. If you are unsure of an API's availability for the ESP32-C3 RISC-V target, check the open-x4-sdk or official docs first.
+* Anti-Hallucination: Do not assume the existence of libraries or ESP-IDF functions. If you are unsure of an API's availability for the ESP32-C3 RISC-V target, check the freeink-sdk source or the FreeInk SDK docs (https://freeink.org/llms.txt for an LLM-readable index) first.
 * No Unfounded Claims: Do not claim performance gains or memory savings without explaining the technical mechanism (e.g., DRAM vs IRAM usage).
 * Resource Justification: You must justify any new heap allocation (new, malloc, std::vector) or explain why a stack/static alternative was rejected.
 * Verification: After suggesting a fix, instruct the user on how to verify it (e.g., monitoring heap via Serial or checking a specific cache file).
@@ -127,7 +127,7 @@ These flags in `platformio.ini` fundamentally affect firmware behavior:
   * lib/hal/: Hardware Abstraction Layer (HalDisplay, HalGPIO, HalStorage)
   * lib/I18n/: Internationalization (translations in `translations/*.yaml`, generated string tables)
 * src/activities/: UI logic using the Activity Lifecycle (onEnter, loop, onExit)
-* open-x4-sdk/: Low-level SDK (EInkDisplay, InputManager, BatteryMonitor, SDCardManager)
+* freeink-sdk/: Low-level SDK (EInkDisplay, InputManager, BatteryMonitor, SDCardManager)
 * .crosspoint/: SD-based binary cache for EPUB metadata and pre-rendered layout sections
 
 ### Hardware Abstraction Layer (HAL)

README.md

@@ -131,6 +131,23 @@ Convert your own TTF/OTF files into `.cpfont` files that load from the SD card.
 
 Conversion runs the firmware repo's `lib/EpdFont/scripts/fontconvert_sdcard.py` script unmodified, so output matches a local host build.
 
+## Custom SD-card themes
+
+Downloadable themes are packaged in the tools repo under `../crosspoint-tools/public/themes/<theme-id>/`. Each theme folder must contain a `theme.json`; optional assets such as generated BMP icons live beside it, usually under `icons/`.
+
+See [SD-card theme creation](./docs/theme-creation.md) for the full JSON format, device-specific overrides, icon generation, CrossInk extension fields, and packaging rules.
+
+After adding or changing a hosted theme, regenerate the download manifest:
+
+```bash
+python3 scripts/generate-theme-manifest.py \
+  --root ../crosspoint-tools/public/themes \
+  --base-url http://crosspointreader.com/themes \
+  --output ../crosspoint-tools/public/themes/themes.json
+```
+
+The script scans every theme folder, includes every file in each package, and writes size and CRC32 values used by the device downloader. Commit changed theme package files and the regenerated `themes.json` in `crosspoint-tools`.
+
 ---
 
 ## Documentation
@@ -138,6 +155,7 @@ Conversion runs the firmware repo's `lib/EpdFont/scripts/fontconvert_sdcard.py`
 - [User Guide](./USER_GUIDE.md)
 - [Web server usage](./docs/webserver.md)
 - [Web server endpoints](./docs/webserver-endpoints.md)
+- [SD-card theme creation](./docs/theme-creation.md)
 - [Project scope](./SCOPE.md)
 - [Contributing docs](./docs/contributing/README.md)
 

USER_GUIDE.md

@@ -122,19 +122,43 @@ A **Wi-Fi signal strength indicator** (dBm) is displayed on-screen during joined
 
 CrossPoint supports sending books from Calibre using the CrossPoint Reader device plugin.
 
-1. Install the plugin in Calibre:
-   
-   - Head to https://github.com/crosspoint-reader/calibre-plugins/releases to download the latest version of the crosspoint_reader plugin.
-   
-   - Download the zip file.
-   
-   - Open Calibre → Preferences → Plugins → Load plugin from file → Select the zip file.
+#### Installing the Plugin in Calibre
 
-2. On the device: File Transfer -> Calibre Wireless, then join a network.
+If you don't already have the plugin installed:
 
-3. Make sure your computer is on the same Wi-Fi network.
+1. Head to https://github.com/crosspoint-reader/calibre-plugins/releases to download the latest version of the crosspoint_reader plugin.
+2. Download the zip file.
+3. Open Calibre → Preferences → Plugins → Load plugin from file → Select the zip file.
+4. Restart Calibre.
 
-4. In Calibre, click "Send to device" to transfer books.
+#### Configuring the CrossPoint Plugin in Calibre
+1. In Calibre select Preferences.
+2. In the Preferences dialog select Plugins.
+3. In Plugins search for "crosspoint".
+4. Click on "Customize plugin".
+5. Update the value for "Host" to match the IP for your device.
+6. Leave the other settings as they are.
+7. [optional] Modify the "Upload path" to point to a subfolder other than the root "/" folder. Enter this as a path relative to the root folder. Example: `/mybooks`
+8. Restart Calibre.
+
+<img width="420" height="385" alt="Image" src="https://github.com/user-attachments/assets/01fc7e33-a9a7-48ba-9e26-2e68d1f9daec" />
+
+#### Uploading Books
+
+To upload a book using the CrossPoint plugin in Calibre:
+
+1. On the device: File Transfer -> Calibre Wireless, then join a network.
+2. Select one or more books.
+3. Right-click on that selection.
+4. Select "Send to Device" > "Send to main memory"
+
+The CrossPoint plugin will connect to your device, create a folder for the book's author in the root folder (or the folder you configured for the plugin), then copy the book into that folder.
+
+<img width="783" height="310" alt="Image" src="https://github.com/user-attachments/assets/741b0909-2e1d-4f16-8af0-2c43fbda5ce6" />
+
+#### Removing a Book
+
+Books cannot be removed from your device through Calibre. Use the web interface instead.
 
 ### 3.6 Settings
 
@@ -150,6 +174,7 @@ The Settings screen allows you to configure the device's behavior. There are a f
   - "Cover" - The book cover image (Note: this is experimental and may not work as expected)
   - "None" - A blank screen
   - "Cover + Custom" - The book cover image while actively reading, falls back to "Custom" behavior otherwise
+  - "Quick resume" - The text of the last page read will be displayed on the sleep screen and a moon icon is shown on the edge of the screen. Waking up the device will return to the same page of the opened book. This is useful for quickly resuming reading without waiting for the device to fully wake up and load the book.
 
 - **Sleep Screen Cover Mode**: How to display the book cover when "Cover" sleep screen is selected:
   
@@ -162,6 +187,8 @@ The Settings screen allows you to configure the device's behavior. There are a f
   - "Contrast" - The image will be displayed as a black & white image without grayscale conversion
   - "Inverted" - The image will be inverted as in white & black and will be displayed without grayscale conversion
 
+- **Quick Resume on Timeout**: Whether to enable the "Quick Resume" sleep screen when the device goes to sleep due to inactivity (System > Time to Sleep). This is useful for quickly resuming reading without waiting for the device to fully wake up and load the book. This overwrites the Sleep Screen Cover Mode when enabled.
+
 - **Status Bar**: Configure the status bar displayed while reading:
   
   - "None" - No status bar

bin/clang-format-fix.ps1

@@ -4,7 +4,7 @@
 
 .DESCRIPTION
     Formats all C/C++ source and header files in the repository, excluding
-    generated, vendored, and build directories (open-x4-sdk, builtinFonts,
+    generated, vendored, and build directories (freeink-sdk, builtinFonts,
     hyphenation tries, uzlib, .pio, *.generated.h).
 
     The clang-format binary path is resolved once and cached in
@@ -92,7 +92,7 @@ function Resolve-ClangFormat {
 $clangFormat = Resolve-ClangFormat
 
 $exclude = @(
-    'open-x4-sdk'
+    'freeink-sdk'
     'lib\EpdFont\builtinFonts'
     'lib\Epub\Epub\hyphenation\generated'
     'lib\uzlib'

docs/contributing/architecture.md

@@ -8,7 +8,7 @@ At a high level, it is firmware that uses an activity-driven application archite
 
 ```mermaid
 graph TD
-    A[Hardware: ESP32-C3 + SD + E-ink + Buttons] --> B[open-x4-sdk]
+    A[Hardware: ESP32-C3 + SD + E-ink + Buttons] --> B[freeink-sdk]
     B --> C[lib/hal wrappers]
     C --> D[src/main.cpp runtime loop]
     D --> E[Activities layer]
@@ -195,10 +195,10 @@ When editing related source assets, regenerate via normal build steps/scripts.
 - `src/`: app orchestration, settings/state, and activity implementations
 - `src/network/`: web server and OTA/update networking
 - `src/components/`: theming and shared UI components
-- `lib/hal/`: hardware abstraction wrappers around open-x4-sdk
+- `lib/hal/`: hardware abstraction wrappers around freeink-sdk
 - `lib/Epub/`: EPUB parser, layout, CSS handling, and hyphenation
 - `lib/`: supporting libraries (fonts, text, filesystem helpers, etc.)
-- `open-x4-sdk/`: hardware SDK submodule (display, input, storage, battery)
+- `freeink-sdk/`: hardware SDK submodule (display, input, storage, battery). Docs: https://freeink.org/docs
 - `docs/`: user and technical documentation
 
 ## Embedded constraints that shape design

lib/FsHelpers/FsHelpers.cpp

@@ -3,6 +3,7 @@
 #include <algorithm>
 #include <cctype>
 #include <cstring>
+#include <string_view>
 #include <vector>
 
 namespace FsHelpers {
@@ -36,12 +37,14 @@ std::string decodeUriEscapes(const std::string& path) {
 }
 
 std::string normalisePath(const std::string& path) {
-  std::vector<std::string> components;
-  std::string component;
+  std::vector<std::string_view> components;
+  components.reserve(8);  // Eight nested folders is more than we might expect
 
-  for (const auto c : path) {
-    if (c == '/') {
-      if (!component.empty()) {
+  size_t start = 0;
+  for (size_t i = 0; i <= path.length(); ++i) {
+    if (i == path.length() || path[i] == '/') {
+      if (i > start) {
+        std::string_view component(path.data() + start, i - start);
         if (component == "..") {
           if (!components.empty()) {
             components.pop_back();
@@ -49,23 +52,28 @@ std::string normalisePath(const std::string& path) {
         } else {
           components.push_back(component);
         }
-        component.clear();
       }
-    } else {
-      component += c;
+      start = i + 1;
     }
   }
 
-  if (!component.empty()) {
-    components.push_back(component);
+  if (components.empty()) {
+    return "";
+  }
+
+  size_t total_len = 0;
+  for (const auto& c : components) {
+    total_len += c.length() + 1;
   }
 
   std::string result;
-  for (const auto& c : components) {
-    if (!result.empty()) {
-      result += "/";
+  result.reserve(total_len - 1);
+
+  for (size_t i = 0; i < components.size(); ++i) {
+    if (i > 0) {
+      result += '/';
     }
-    result += c;
+    result.append(components[i].data(), components[i].length());
   }
 
   return result;

lib/GfxRenderer/GfxRenderer.cpp

@@ -8,6 +8,7 @@
 #include <Utf8.h>
 
 #include <algorithm>
+#include <cassert>
 
 #include "FontCacheManager.h"
 
@@ -661,8 +662,10 @@ void GfxRenderer::drawRoundedRect(const int x, const int y, const int width, con
 }
 
 void GfxRenderer::fillRect(const int x, const int y, const int width, const int height, const bool state) const {
-  for (int fillY = y; fillY < y + height; fillY++) {
-    drawLine(x, fillY, x + width - 1, fillY, state);
+  if (state) {
+    fillRectImpl<Color::Black>(x, y, width, height);
+  } else {
+    fillRectImpl<Color::White>(x, y, width, height);
   }
 }
 
@@ -694,26 +697,194 @@ void GfxRenderer::drawPixelDither<Color::DarkGray>(const int x, const int y) con
 }
 
 void GfxRenderer::fillRectDither(const int x, const int y, const int width, const int height, Color color) const {
-  if (color == Color::Clear) {
-  } else if (color == Color::Black) {
-    fillRect(x, y, width, height, true);
-  } else if (color == Color::White) {
-    fillRect(x, y, width, height, false);
-  } else if (color == Color::LightGray) {
-    for (int fillY = y; fillY < y + height; fillY++) {
-      for (int fillX = x; fillX < x + width; fillX++) {
-        drawPixelDither<Color::LightGray>(fillX, fillY);
+  switch (color) {
+    case Color::Clear:
+      break;
+    case Color::Black:
+      fillRectImpl<Color::Black>(x, y, width, height);
+      break;
+    case Color::White:
+      fillRectImpl<Color::White>(x, y, width, height);
+      break;
+    case Color::LightGray:
+      fillRectImpl<Color::LightGray>(x, y, width, height);
+      break;
+    case Color::DarkGray:
+      fillRectImpl<Color::DarkGray>(x, y, width, height);
+      break;
+  }
+}
+
+template <Color C>
+void GfxRenderer::fillRectImpl(const int x, const int y, const int width, const int height) const {
+  if constexpr (C == Color::Clear) return;
+  if (width <= 0 || height <= 0) return;
+  if (fontCacheManager_ && fontCacheManager_->isScanning()) return;
+
+  // Clip in logical space.
+  const int screenW = getScreenWidth();
+  const int screenH = getScreenHeight();
+  const int lx0 = std::max(0, x);
+  const int ly0 = std::max(0, y);
+  const int lx1 = std::min(screenW, x + width);
+  const int ly1 = std::min(screenH, y + height);
+  if (lx0 >= lx1 || ly0 >= ly1) return;
+
+  // Rotate the two opposing logical corners into physical-framebuffer space.
+  // The bounding rect in physical space is the rect we need to fill — rotation
+  // is rigid (no shear/stretch) so the bbox of the two corners IS the rect.
+  int paX, paY, pbX, pbY;
+  rotateCoordinates(orientation, lx0, ly0, &paX, &paY, panelWidth, panelHeight);
+  rotateCoordinates(orientation, lx1 - 1, ly1 - 1, &pbX, &pbY, panelWidth, panelHeight);
+
+  const int phyX0 = std::min(paX, pbX);
+  const int phyX1 = std::max(paX, pbX);  // inclusive
+  int phyY0 = std::min(paY, pbY);
+  int phyY1 = std::max(paY, pbY);
+
+  // Strip mode: clip Y range to the active band and redirect writes.
+  uint8_t* target = getWriteTarget();
+  const int originY = getWriteOriginY();
+  const int writeRows = getWriteRows();
+  phyY0 = std::max(phyY0, originY);
+  phyY1 = std::min(phyY1, originY + writeRows - 1);
+  if (phyY0 > phyY1) return;
+
+  // Bit/byte layout: MSB-first within a byte, so phyX → bit (7 - (phyX & 7)).
+  // Head and tail masks cover only the in-rect bits of the first/last byte.
+  const int byteStart = phyX0 >> 3;
+  const int byteEnd = phyX1 >> 3;  // inclusive
+  const uint8_t headMask = static_cast<uint8_t>(0xFFu >> (phyX0 & 7));
+  const uint8_t tailMask = static_cast<uint8_t>(0xFFu << (7 - (phyX1 & 7)));
+  const int32_t panelStride = static_cast<int32_t>(panelWidthBytes);
+
+  if constexpr (C == Color::Black || C == Color::White) {
+    // Solid fill. Framebuffer: 0 = black, 1 = white.
+    const uint8_t fillByte = (C == Color::Black) ? 0x00u : 0xFFu;
+    for (int py = phyY0; py <= phyY1; ++py) {
+      uint8_t* row = target + static_cast<int32_t>(py - originY) * panelStride;
+      if (byteStart == byteEnd) {
+        const uint8_t mask = headMask & tailMask;
+        if constexpr (C == Color::Black) {
+          row[byteStart] &= static_cast<uint8_t>(~mask);
+        } else {
+          row[byteStart] |= mask;
+        }
+      } else {
+        if constexpr (C == Color::Black) {
+          row[byteStart] &= static_cast<uint8_t>(~headMask);
+          if (byteEnd > byteStart + 1) {
+            memset(row + byteStart + 1, fillByte, byteEnd - byteStart - 1);
+          }
+          row[byteEnd] &= static_cast<uint8_t>(~tailMask);
+        } else {
+          row[byteStart] |= headMask;
+          if (byteEnd > byteStart + 1) {
+            memset(row + byteStart + 1, fillByte, byteEnd - byteStart - 1);
+          }
+          row[byteEnd] |= tailMask;
+        }
       }
     }
-  } else if (color == Color::DarkGray) {
-    for (int fillY = y; fillY < y + height; fillY++) {
-      for (int fillX = x; fillX < x + width; fillX++) {
-        drawPixelDither<Color::DarkGray>(fillX, fillY);
+  } else {
+    // Dither (LightGray / DarkGray). Both patterns have period 2 in logical
+    // (x, y), so per physical row we precompute one byte that represents the
+    // pattern across an 8-pixel stretch — every full byte in the row uses
+    // that same value.
+    //
+    // dlxPerPhyX / dlyPerPhyX: how logical (x, y) change as phyX increments
+    // along a physical row. Derived from inverting rotateCoordinates.
+    int dlxPerPhyX = 0, dlyPerPhyX = 0;
+    switch (orientation) {
+      case Portrait:
+        dlxPerPhyX = 0;
+        dlyPerPhyX = 1;
+        break;
+      case PortraitInverted:
+        dlxPerPhyX = 0;
+        dlyPerPhyX = -1;
+        break;
+      case LandscapeClockwise:
+        dlxPerPhyX = -1;
+        dlyPerPhyX = 0;
+        break;
+      case LandscapeCounterClockwise:
+        dlxPerPhyX = 1;
+        dlyPerPhyX = 0;
+        break;
+    }
+
+    // The dither pattern has period 2 in logical space, and each orientation
+    // maps py to logical coords with a fixed parity relationship. The
+    // blackMask byte therefore repeats with period 2 in py. Precompute both
+    // variants outside the row loop to eliminate the per-row switch + 8-bit
+    // construction loop.
+    uint8_t blackMasks[2];
+    for (int parityIdx = 0; parityIdx < 2; ++parityIdx) {
+      const int samplePy = phyY0 + parityIdx;
+      int lxBase = 0, lyBase = 0;
+      switch (orientation) {
+        case Portrait:
+          lxBase = panelHeight - 1 - samplePy;
+          lyBase = byteStart * 8;
+          break;
+        case PortraitInverted:
+          lxBase = samplePy;
+          lyBase = panelWidth - 1 - byteStart * 8;
+          break;
+        case LandscapeClockwise:
+          lxBase = panelWidth - 1 - byteStart * 8;
+          lyBase = panelHeight - 1 - samplePy;
+          break;
+        case LandscapeCounterClockwise:
+          lxBase = byteStart * 8;
+          lyBase = samplePy;
+          break;
+      }
+      uint8_t mask = 0;
+      for (int b = 0; b < 8; ++b) {
+        const int lx = lxBase + b * dlxPerPhyX;
+        const int ly = lyBase + b * dlyPerPhyX;
+        bool isBlack;
+        if constexpr (C == Color::LightGray) {
+          isBlack = ((lx & 1) == 0) && ((ly & 1) == 0);
+        } else {  // DarkGray
+          isBlack = (((lx + ly) & 1) == 0);
+        }
+        if (isBlack) mask |= static_cast<uint8_t>(1u << (7 - b));
+      }
+      blackMasks[samplePy & 1] = mask;
+    }
+
+    for (int py = phyY0; py <= phyY1; ++py) {
+      const uint8_t blackMask = blackMasks[py & 1];
+      const uint8_t whiteMask = static_cast<uint8_t>(~blackMask);
+
+      // Dither writes BOTH inks (the slow path called drawPixel for every
+      // pixel — setting or clearing — so we must do the same). Inside the
+      // rect mask: write whiteMask (1s where white, 0s where black). Outside
+      // the rect mask: leave the framebuffer untouched.
+      uint8_t* row = target + static_cast<int32_t>(py - originY) * panelStride;
+      if (byteStart == byteEnd) {
+        const uint8_t rectMask = headMask & tailMask;
+        row[byteStart] = static_cast<uint8_t>((row[byteStart] & ~rectMask) | (rectMask & whiteMask));
+      } else {
+        row[byteStart] = static_cast<uint8_t>((row[byteStart] & ~headMask) | (headMask & whiteMask));
+        if (byteEnd > byteStart + 1) {
+          // Period 2, so every full byte in this row is exactly whiteMask.
+          memset(row + byteStart + 1, whiteMask, byteEnd - byteStart - 1);
+        }
+        row[byteEnd] = static_cast<uint8_t>((row[byteEnd] & ~tailMask) | (tailMask & whiteMask));
       }
     }
   }
 }
 
+template void GfxRenderer::fillRectImpl<Color::Black>(int, int, int, int) const;
+template void GfxRenderer::fillRectImpl<Color::White>(int, int, int, int) const;
+template void GfxRenderer::fillRectImpl<Color::LightGray>(int, int, int, int) const;
+template void GfxRenderer::fillRectImpl<Color::DarkGray>(int, int, int, int) const;
+
 void GfxRenderer::maskRoundedRectOutsideCorners(const int x, const int y, const int width, const int height,
                                                 const int radius, const Color color) const {
   if (radius <= 0 || color == Color::Clear) {
@@ -885,7 +1056,19 @@ void GfxRenderer::drawImage(const uint8_t bitmap[], const int x, const int y, co
 }
 
 void GfxRenderer::drawIcon(const uint8_t bitmap[], const int x, const int y, const int width, const int height) const {
-  display.drawImageTransparent(bitmap, y, getScreenWidth() - width - x, height, width);
+  if (bitmap == nullptr || width <= 0 || height <= 0) return;
+  assert(width == height);
+
+  const int bytesPerRow = (width + 7) / 8;
+  for (int sourceY = 0; sourceY < height; ++sourceY) {
+    for (int sourceX = 0; sourceX < width; ++sourceX) {
+      const uint8_t rowByte = bitmap[sourceY * bytesPerRow + sourceX / 8];
+      const bool background = (rowByte >> (7 - (sourceX % 8))) & 0x01;
+      if (background) continue;
+
+      drawPixel(x + height - 1 - sourceY, y + sourceX, true);
+    }
+  }
 }
 
 void GfxRenderer::drawBitmap(const Bitmap& bitmap, const int x, const int y, const int maxWidth, const int maxHeight,

lib/GfxRenderer/GfxRenderer.h

@@ -81,6 +81,12 @@ class GfxRenderer {
   void drawPixelDither(int x, int y) const;
   template <Color color>
   void fillArc(int maxRadius, int cx, int cy, int xDir, int yDir) const;
+  // Byte-aligned, orientation-specialized rectangle fill. Rotates the rect's
+  // two opposing corners into physical-framebuffer space once, then walks each
+  // physical row with head-mask / middle memset / tail-mask byte writes — no
+  // per-pixel rotation, no per-pixel RMW.
+  template <Color color>
+  void fillRectImpl(int x, int y, int width, int height) const;
 
  public:
   explicit GfxRenderer(HalDisplay& halDisplay)

lib/I18n/translations/belarusian.yaml

@@ -126,6 +126,7 @@ STR_PAGE_TURN: "Перагортванне"
 STR_PORTRAIT: "Партрэт"
 STR_LANDSCAPE_CW: "Ландшафт (CW)"
 STR_INVERTED: "Інверсія"
+STR_ORIENTATION_INVERTED: "Партрэт 180°"
 STR_LANDSCAPE_CCW: "Ландшафт (CCW)"
 STR_PREV_NEXT: "Назад/Наперад"
 STR_NEXT_PREV: "Наперад/Назад"
@@ -299,3 +300,4 @@ STR_SLEEP_TIMER_STEP_HINT: "Улева/Управа: 1 хв  Уверх/Уніз
 STR_AUTO_TURN_ENABLED: "Аўтаперагортванне: "
 STR_AUTO_TURN_PAGES_PER_MIN: "Аўтаперагортванне (старонак за хвіліну)"
 STR_TILT_PAGE_TURN: "Перагортванне нахілам"
+STR_MANAGE_THEMES: "Кіраванне тэмамі"

lib/I18n/translations/catalan.yaml

@@ -136,6 +136,7 @@ STR_PAGE_TURN: "Canvi de pàgina"
 STR_PORTRAIT: "Vertical"
 STR_LANDSCAPE_CW: "Horitzontal horari"
 STR_INVERTED: "Invertit"
+STR_ORIENTATION_INVERTED: "Vertical 180°"
 STR_LANDSCAPE_CCW: "Horitzontal antihorari"
 STR_PREV_NEXT: "Anterior/Següent"
 STR_NEXT_PREV: "Següent/Anterior"
@@ -382,3 +383,4 @@ STR_FIRMWARE_WRITE_FAILED: "Ha fallat l'escriptura del firmware"
 STR_FIRMWARE_UPDATE_DO_NOT_POWER_OFF: "No apagueu el dispositiu!"
 STR_RECOVERY_MODE: "Mode de recuperació"
 STR_RECOVERY_MODE_HINT: "Poseu firmware.bin a l'arrel de la targeta SD i seleccioneu-lo"
+STR_MANAGE_THEMES: "Gestiona els temes"

lib/I18n/translations/czech.yaml

@@ -131,6 +131,7 @@ STR_PAGE_TURN: "Otáčení stránek"
 STR_PORTRAIT: "Na výšku"
 STR_LANDSCAPE_CW: "Na šířku po směru hod. ručiček"
 STR_INVERTED: "Invertovaný"
+STR_ORIENTATION_INVERTED: "Na výšku 180°"
 STR_LANDSCAPE_CCW: "Na šířku proti směru hod. ručiček"
 STR_PREV_NEXT: "Předchozí/Další"
 STR_NEXT_PREV: "Další/Předchozí"
@@ -274,3 +275,4 @@ STR_SLEEP_TIMER_VALUE_FORMAT: "%u min"
 STR_SLEEP_NEVER: "Nikdy"
 STR_SLEEP_TIMER_STEP_HINT: "Vlevo/Vpravo: 1 min  Nahoru/Dolů: 5 min"
 STR_TILT_PAGE_TURN: "Otáčení stránek nakloněním"
+STR_MANAGE_THEMES: "Spravovat motivy"

lib/I18n/translations/danish.yaml

@@ -136,6 +136,7 @@ STR_PAGE_TURN: "Sideskift"
 STR_PORTRAIT: "Portræt"
 STR_LANDSCAPE_CW: "Liggende med uret"
 STR_INVERTED: "Inverteret"
+STR_ORIENTATION_INVERTED: "Portræt 180°"
 STR_LANDSCAPE_CCW: "Liggende mod uret"
 STR_PREV_NEXT: "Forrige/Næste"
 STR_NEXT_PREV: "Næste/Forrige"
@@ -302,3 +303,4 @@ STR_SCREENSHOT_BUTTON: "Tag skærmbillede"
 STR_AUTO_TURN_ENABLED: "Automatisk sidevendning aktiveret: "
 STR_AUTO_TURN_PAGES_PER_MIN: "Automatisk vending (sider per minut)"
 STR_TILT_PAGE_TURN: "Vip for at vende side"
+STR_MANAGE_THEMES: "Administrer temaer"

lib/I18n/translations/dutch.yaml

@@ -135,7 +135,8 @@ STR_SLEEP: "Slaap"
 STR_PAGE_TURN: "Pagina omslaan"
 STR_PORTRAIT: "Staand"
 STR_LANDSCAPE_CW: "Liggend (rechtsom)"
-STR_INVERTED: "Omgekeerd"
+STR_INVERTED: "Geïnverteerd"
+STR_ORIENTATION_INVERTED: "Staand 180°"
 STR_LANDSCAPE_CCW: "Liggend (linksom)"
 STR_PREV_NEXT: "Vorige/Volgende"
 STR_NEXT_PREV: "Volgende/Vorige"
@@ -302,3 +303,4 @@ STR_SCREENSHOT_BUTTON: "Screenshot maken"
 STR_AUTO_TURN_ENABLED: "Automatisch omslaan ingeschakeld: "
 STR_AUTO_TURN_PAGES_PER_MIN: "Autom. omslaan (pagina's per minuut)"
 STR_TILT_PAGE_TURN: "Kantel om te bladeren"
+STR_MANAGE_THEMES: "Thema's beheren"

lib/I18n/translations/english.yaml

@@ -139,6 +139,7 @@ STR_FORCE_REFRESH: "Refresh Screen"
 STR_PORTRAIT: "Portrait"
 STR_LANDSCAPE_CW: "Landscape CW"
 STR_INVERTED: "Inverted"
+STR_ORIENTATION_INVERTED: "Portrait 180°"
 STR_LANDSCAPE_CCW: "Landscape CCW"
 STR_PREV_NEXT: "Prev/Next"
 STR_NEXT_PREV: "Next/Prev"
@@ -349,6 +350,7 @@ STR_INSTALLED: "Installed"
 STR_DOWNLOAD_ALL: "Download All"
 STR_UPDATE_ALL: "Update All"
 STR_UPDATE_AVAILABLE: "Update"
+STR_MANAGE_THEMES: "Manage Themes"
 STR_CRASH_TITLE: "System Crash"
 STR_CRASH_DESCRIPTION: "A detailed report was saved to crash_report.txt. Please include this file in your bug report."
 STR_CRASH_REASON: "Crash reason:"

lib/I18n/translations/finnish.yaml

@@ -130,7 +130,8 @@ STR_SLEEP: "Lepotila"
 STR_PAGE_TURN: "Sivunkääntö"
 STR_PORTRAIT: "Pysty"
 STR_LANDSCAPE_CW: "Vaaka myötäpäivään"
-STR_INVERTED: "Käännetty"
+STR_INVERTED: "Käänteinen"
+STR_ORIENTATION_INVERTED: "Pysty 180°"
 STR_LANDSCAPE_CCW: "Vaaka vastapäivään"
 STR_PREV_NEXT: "Edell/Seur"
 STR_NEXT_PREV: "Seur/Edell"
@@ -272,3 +273,4 @@ STR_SLEEP_TIMER_VALUE_FORMAT: "%u min"
 STR_SLEEP_NEVER: "Ei koskaan"
 STR_SLEEP_TIMER_STEP_HINT: "Vasen/Oikea: 1 min  Ylös/Alas: 5 min"
 STR_TILT_PAGE_TURN: "Sivunkääntö kallistamalla"
+STR_MANAGE_THEMES: "Hallinnoi teemoja"

lib/I18n/translations/french.yaml

@@ -136,6 +136,7 @@ STR_PAGE_TURN: "Page suivante"
 STR_PORTRAIT: "Portrait"
 STR_LANDSCAPE_CW: "Paysage"
 STR_INVERTED: "Inversé"
+STR_ORIENTATION_INVERTED: "Portrait 180°"
 STR_LANDSCAPE_CCW: "Paysage inversé"
 STR_PREV_NEXT: "Préc/Suiv"
 STR_NEXT_PREV: "Suiv/Préc"
@@ -303,3 +304,4 @@ STR_SCREENSHOT_BUTTON: "Capture d'écran"
 STR_AUTO_TURN_ENABLED: "Tourne-page auto : "
 STR_AUTO_TURN_PAGES_PER_MIN: "Tourne-page auto (pages par minute)"
 STR_TILT_PAGE_TURN: "Tourner par inclinaison"
+STR_MANAGE_THEMES: "Gérer les thèmes"

lib/I18n/translations/german.yaml

@@ -70,7 +70,7 @@ STR_ORIENTATION: "Leseausrichtung"
 STR_SIDE_BTN_LAYOUT: "Seitliche Tasten (Lesen)"
 STR_FRONT_BTN_FOLLOW_ORIENTATION: "Vordere Tasten ausrichten"
 STR_LONG_PRESS_BEHAVIOR: "Verhalten bei langem Tastendruck"
-STR_LONG_PRESS_BEHAVIOR_OFF: "AUS"
+STR_LONG_PRESS_BEHAVIOR_OFF: "Aus"
 STR_LONG_PRESS_BEHAVIOR_SKIP: "Kapitel überspringen"
 STR_LONG_PRESS_BEHAVIOR_ORIENTATION: "Ausrichtung ändern"
 STR_FONT_PREVIEW_TEXT: "Victor jagt zwölf Boxkämpfer quer über den großen Sylter Deich"
@@ -79,8 +79,9 @@ STR_FONT_SIZE: "Schriftgröße"
 STR_LINE_SPACING: "Lese-Zeilenabstand"
 STR_SCREEN_MARGIN: "Lese-Seitenränder"
 STR_PARA_ALIGNMENT: "Lese-Absatzausrichtung"
+STR_LONG_PRESS_MENU: "Menütaste lang drücken"
 STR_HYPHENATION: "Silbentrennung"
-STR_TIME_TO_SLEEP: "Standby nach"
+STR_TIME_TO_SLEEP: "Standby-Modus nach"
 STR_REFRESH_FREQ: "Anti-Ghosting nach"
 STR_KOREADER_SYNC: "KOReader-Synchr."
 STR_CHECK_UPDATES: "Nach Updates suchen"
@@ -129,7 +130,8 @@ STR_PAGE_TURN: "Umblättern"
 STR_FORCE_REFRESH: "Bildschirm regenerieren"
 STR_PORTRAIT: "Hochformat"
 STR_LANDSCAPE_CW: "Querformat rechts"
-STR_INVERTED: "Hochformat 180°"
+STR_INVERTED: "Invertiert"
+STR_ORIENTATION_INVERTED: "Hochformat 180°"
 STR_LANDSCAPE_CCW: "Querformat links"
 STR_PREV_NEXT: "Zurück/Weiter"
 STR_NEXT_PREV: "Weiter/Zurück"
@@ -378,3 +380,4 @@ STR_FIRMWARE_WRITE_FAILED: "Schreiben der Firmware-Datei ist fehlgeschlagen"
 STR_FIRMWARE_UPDATE_DO_NOT_POWER_OFF: "Nicht ausschalten!"
 STR_RECOVERY_MODE: "Wiederherstellungsmodus"
 STR_RECOVERY_MODE_HINT: "Lege firmware.bin im SD-Kartenwurzelverzeichnis ab und wähle es aus"
+STR_MANAGE_THEMES: "Designs verwalten"