## Summary
* Correctly render italics on image alt placeholders
* Parser incorrectly handled depth of self-closing tags
* Self-closing tags immediately call start and end tag
## Additional Context
* Previously, it would incorrectly make the whole chapter bold/italics,
or not italicised the image alt
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
* **What is the goal of this PR?**
Quality of Life
* **What changes are included?**
Add compile_commands.json & .cache to .gitignore .
Both are use by clangd that can help IDE support.
Run `pio run --target compiledb` to generate `compile_commands.json`.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Finally, I have received my device and got to chance to work on OTA.
https://github.com/crosspoint-reader/crosspoint-reader/issues/176
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Existing OTA functionality is very buggy, many of times (I would say 8
out of 10) are end up with fail for me. When the time that it works it
is very slow and take ages. For others looks like end up with crash or
different issues.
* **What changes are included?**
To be honest, I'm not familiar with Arduino APIs of OTA process, but
looks like not good as much esp-idf itself. I always found Arduino APIs
very bulky for esp32. Wrappers and wrappers.
## Additional Context
Right now, OTA takes ~ 3min 10sec (of course depends on size of .bin
file). Can be tested with playing version info inside from
`platform.ini` file.
```
[crosspoint]
version = 0.14.0
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
## Summary
Optimizes EPUB metadata indexing for large books (2000+ chapters) from
~30 minutes to ~50 seconds by replacing O(n²) algorithms with O(n log n)
hash-indexed lookups.
Fixes#134
## Problem
Three phases had O(n²) complexity due to nested loops:
| Phase | Operation | Before (2768 chapters) |
|-------|-----------|------------------------|
| OPF Pass | For each spine ref, scan all manifest items | ~25 min |
| TOC Pass | For each TOC entry, scan all spine items | ~5 min |
| buildBookBin | For each spine item, scan ZIP central directory | ~8.4
min |
Total: **~30+ minutes** for first-time indexing of large EPUBs.
## Solution
Replace linear scans with sorted hash indexes + binary search:
- **OPF Pass**: Build `{hash(id), len, offset}` index from manifest,
binary search for each spine ref
- **TOC Pass**: Build `{hash(href), len, spineIndex}` index from spine,
binary search for each TOC entry
- **buildBookBin**: New `ZipFile::fillUncompressedSizes()` API - single
ZIP central directory scan with batch hash matching
All indexes use FNV-1a hashing with length as secondary key to minimize
collisions. Indexes are freed immediately after each phase.
## Results
**Shadow Slave EPUB (2768 chapters):**
| Phase | Before | After | Speedup |
|-------|--------|-------|---------|
| OPF pass | ~25 min | 10.8 sec | ~140x |
| TOC pass | ~5 min | 4.7 sec | ~60x |
| buildBookBin | 506 sec | 34.6 sec | ~15x |
| **Total** | **~30+ min** | **~50 sec** | **~36x** |
**Normal EPUB (87 chapters):** 1.7 sec - no regression.
## Memory
Peak temporary memory during indexing:
- OPF index: ~33KB (2770 items × 12 bytes)
- TOC index: ~33KB (2768 items × 12 bytes)
- ZIP batch: ~44KB (targets + sizes arrays)
All indexes cleared immediately after each phase. No OOM risk on
ESP32-C3.
## Note on Threshold
All optimizations are gated by `LARGE_SPINE_THRESHOLD = 400` to preserve
existing behavior for small books. However, the algorithms work
correctly for any book size and are faster even for small books:
| Book Size | Old O(n²) | New O(n log n) | Improvement |
|-----------|-----------|----------------|-------------|
| 10 ch | 100 ops | 50 ops | 2x |
| 100 ch | 10K ops | 800 ops | 12x |
| 400 ch | 160K ops | 4K ops | 40x |
If preferred, the threshold could be removed to use the optimized path
universally.
## Testing
- [x] Shadow Slave (2768 chapters): 50s first-time indexing, loads and
navigates correctly
- [x] Normal book (87 chapters): 1.7s indexing, no regression
- [x] Build passes
- [x] clang-format passes
## Files Changed
- `lib/Epub/Epub/parsers/ContentOpfParser.h/.cpp` - OPF manifest index
- `lib/Epub/Epub/BookMetadataCache.h/.cpp` - TOC index + batch size
lookup
- `lib/ZipFile/ZipFile.h/.cpp` - New `fillUncompressedSizes()` API
- `lib/Epub/Epub.cpp` - Timing logs
<details>
<summary><b>Algorithm Details</b> (click to expand)</summary>
### Phase 1: OPF Pass - Manifest to Spine Lookup
**Problem**: Each `<itemref idref="ch001">` in spine must find matching
`<item id="ch001" href="...">` in manifest.
```
OLD: For each of 2768 spine refs, scan all 2770 manifest items
= 7.6M string comparisons
NEW: While parsing manifest, build index:
{ hash("ch001"), len=5, file_offset=120 }
Sort index, then binary search for each spine ref:
2768 × log₂(2770) ≈ 2768 × 11 = 30K comparisons
```
### Phase 2: TOC Pass - TOC Entry to Spine Index Lookup
**Problem**: Each TOC entry with `href="chapter0001.xhtml"` must find
its spine index.
```
OLD: For each of 2768 TOC entries, scan all 2768 spine entries
= 7.6M string comparisons
NEW: At beginTocPass(), read spine once and build index:
{ hash("OEBPS/chapter0001.xhtml"), len=25, spineIndex=0 }
Sort index, binary search for each TOC entry:
2768 × log₂(2768) ≈ 30K comparisons
Clear index at endTocPass() to free memory.
```
### Phase 3: buildBookBin - ZIP Size Lookup
**Problem**: Need uncompressed file size for each spine item (for
reading progress). Sizes are in ZIP central directory.
```
OLD: For each of 2768 spine items, scan ZIP central directory (2773 entries)
= 7.6M filename reads + string comparisons
Time: 506 seconds
NEW:
Step 1: Build targets from spine
{ hash("OEBPS/chapter0001.xhtml"), len=25, index=0 }
Sort by (hash, len)
Step 2: Single pass through ZIP central directory
For each entry:
- Compute hash ON THE FLY (no string allocation)
- Binary search targets
- If match: sizes[target.index] = uncompressedSize
Step 3: Use sizes array directly (O(1) per spine item)
Total: 2773 entries × log₂(2768) ≈ 33K comparisons
Time: 35 seconds
```
### Why Hash + Length?
Using 64-bit FNV-1a hash + string length as a composite key:
- Collision probability: ~1 in 2⁶⁴ × typical_path_lengths
- No string storage needed in index (just 12-16 bytes per entry)
- Integer comparisons are faster than string comparisons
- Verification on match handles the rare collision case
</details>
---
_AI-assisted development. All changes tested on hardware._
## Summary
* **What is the goal of this PR?** Add Spanish language hyphenation
support to improve text rendering for Spanish books.
* **What changes are included?**
- Added Spanish hyphenation trie (`hyph-es.trie.h`) generated from
Typst's hypher patterns
- Registered `spanishHyphenator` in `LanguageRegistry.cpp` for language
tag `es`
- Added Spanish to the hyphenation evaluation test suite
- Added Spanish test data file with 5000 test cases
## Additional Context
* **Test Results:** Spanish hyphenation achieves 99.02% F1 Score (97.72%
perfect matches out of 5000 test cases)
* **Compatibility:** Works automatically for EPUBs with
`<dc:language>es</dc:language>` (or es-ES, es-MX, etc.)
<img width="115" height="189" alt="imagen"
src="https://github.com/user-attachments/assets/9b92e7fc-b98d-48af-8d53-dfdc2e68abee"
/>
| Metric | Value |
|--------|-------|
| Perfect matches | 97.72% |
| Overall Precision | 99.33% |
| Overall Recall | 99.42% |
| Overall F1 Score | 99.38% |
---
### AI Usage
Did you use AI tools to help write this code? _**PARTIALLY**_
AI assisted with:
- Guiding and compile
- Preparing the PR description
## Summary
* If long-press chapter skip is disabled, turn pages on button pressed,
not released
* Makes page turning snappier
* Refactors MappedInputManager for readability
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY>**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** This PR introduces a new "Status Bar"
mode that displays a visual progress bar at the bottom of the screen,
providing readers with a graphical indication of their position within
the book.
* **What changes are included?**
* **Settings**: Updated SettingsActivity to expand the "Status Bar"
configuration with a new option: Full w/ Progress Bar.
* **EPUB Reader**: Modified EpubReaderActivity to calculate the global
book progress and render a progress bar at the bottom of the viewable
area when the new setting is active.
* **TXT Reader**: Modified TxtReaderActivity to implement similar
progress bar rendering logic based on the current page and total page
count.
## Additional Context
* The progress bar is rendered with a height of 4 pixels at the very
bottom of the screen (adjusted for margins).
* The feature reuses the existing renderStatusBar logic but
conditionally draws the bar instead of (or in addition to) other
elements depending on the specific implementation details in each
reader.
* Renamed existing 'Full' mode to 'Full w/ Percentage'
* Added new 'Full w/ Progress Bar' option
<img
src="https://github.com/user-attachments/assets/08c0dd49-c64c-4d4d-9fbb-f576c02d05d9"
width="500">
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Fixes#487
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _** YES **_
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
This was originally a comment in #499, but I'm making it its own PR,
because it doesn't depend on anything there and then I can base that PR
on this one.
Currently, `drawBitmap` is used for covers and sleep wallpaper, and
`drawImage` is used for the boot logo. `drawBitmap` goes row by row and
pixel by pixel, so it respects the renderer orientation. `drawImage`
just calls the `EInkDisplay`'s `drawImage`, which works in the eink
panel's native display orientation.
`drawImage` rotates the x,y coordinates where it's going to draw the
image, but doesn't account for the fact that the northwest corner in
portrait orientation becomes, the southwest corner of the image
rectangle in the native orientation. The boot and sleep activities
currently work around this by calculating the north*east* corner of
where the image should go, which becomes the northwest corner after
`rotateCoordinates`.
I think this wasn't really apparent because the CrossPoint logo is
rotationally symmetrical. The `EInkDisplay` `drawImage` always draws the
image in native orientation, but that looks the same for the "X" image.
If we rotate the origin coordinate in `GfxRenderer`'s `drawImage`, we
can use a much clearer northwest corner coordinate in the boot and sleep
activities. (And then, in #499, we can actually rotate the boot screen
to the user's preferred orientation).
This does *not* yet rotate the actual bits in the image; it's still
displayed in native orientation. This doesn't affect the
rotationally-symmetric logo, but if it's ever changed, we will probably
want to allocate a new `u8int[]` and transpose rows and columns if
necessary.
## Additional Context
I've created an additional branch on top of this to demonstrate by
replacing the logo with a non-rotationally-symmetrical image:
<img width="128" height="128" alt="Cat-in-a-pan-128-bw"
src="https://github.com/user-attachments/assets/d0b239bc-fe75-4ec8-bc02-9cf9436ca65f"
/>
https://github.com/crosspoint-reader/crosspoint-reader/compare/master...maeveynot:rotated-cat
(many thanks to https://notisrac.github.io/FileToCArray/)
As you can see, it is always drawn in native orientation, which makes it
sideways (turned clockwise) in portrait.
---
### AI Usage
No
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* Extract author from XTC/XTCH files
## Additional Context
* Based on updated details in
https://gist.github.com/CrazyCoder/b125f26d6987c0620058249f59f1327d
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
* **What is the goal of this PR?** Simple quality of life, ease
maintenance
* **What changes are included?**
Update fontconvert.py to include the command used to generate each font
file in the header comment, making it easier to regenerate fonts when
needed.
I plan on adding options to this scripts (kerning, and maybe ligatures),
thus knowing which command was used, even with already existing options
like `--additional-intervals`, is important.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
- Update README with the list of supported languages for EPUB files.
- Update USER_GUIDE with an extended list of supported and unsupported
languages.
## Additional Context
For weeks, I thought this firmware only supported English, because I
remember you saying that full language support would only be possible
after implementing proper font rendering. I also remember mentioning a
separate Korean fork, Vietnamese issues and so on.
All of this made it clear that this system doesn't support my languages.
I was surprised when I saw a Reddit post with a photo of a book in my
native language. Only then I did learn that such languages are
supported. Therefore, mentioning the supported languages would help
future buyers and new users.
---
### AI Usage
Did you use AI tools to help write this code? _**NO**_
## Summary
* **What is the goal of this PR?**
Resolve [KoSync progress does not sync between Crosspoint-reader and
KOReader
(Kindle)](https://github.com/crosspoint-reader/crosspoint-reader/issues/502)
* **What changes are included?**
KOReaderDocumentId::getOffset() - Update the value for the md5 offset
calculation to match KOReader.
## Additional Context
I've tested this with a couple of my ebooks and binary matching with
KOReader sync seems to be working fine now for both pushing and pulling
progress.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Should address issues discussed in #168 and potentially fix#478.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* Aims to fix Issue #220
* **What changes are included?**
- Increased size of `progress.bin` such that total page count of current
section can be stored
- Comparison of total page count is done to determine if reader settings
were changed
- New position/page number is calculated using percentage calculated
from read progress
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Fix https://github.com/crosspoint-reader/crosspoint-reader/issues/288
Based on my observation, it seems like the problem was that
`inputManager.isPressed(InputManager::BTN_POWER)` takes a bit of time
after waking up to report the correct value. I haven't tested this
behavior with a standalone ESP32C3, but if you know more about this,
feel free to comment.
However, if we just want short press, I think it's enough to check for
wake up source. If we plan to allow multiple buttons to wake up in the
future, may consider using ext1 / `esp_sleep_get_ext1_wakeup_status()`
to allow identify which pin triggered wake up.
Note that I'm not particularly experienced in esp32 developments, just
happen to have prior knowledge hacking esphome.
## Additional Context
N/A
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Fixes#519
* Refactors repeated code into new function:
`ChapterHtmlSlimParser::flushPartWordBuffer()`
## Additional Context
* The `<br/>` tag is self closing and _in-line_, so the existing logic
for closing block tags does not get applied to `<br/>` tags.
* This PR adds the _in-line_ logic to:
* Flush the word preceding the `<br/>` tag from `partWordBuffer` to
`currentTextBlock` before calling `startNewTextBlock`
* **New function**: `ChapterHtmlSlimParser::flushPartWordBuffer()`
* **Purpose**: Consolidates the logic for flushing `partWordBuffer` to
`currentTextBlock`
* **Impact**: Simplifies `ChapterHtmlSlimParser::characterData(…)`,
`ChapterHtmlSlimParser::startElement(…)`, and
`ChapterHtmlSlimParser::endElement(…)` by integrating reused code into
single function
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Our esp32 consistently dropped the last few packets of the TCP transfer
in the old implementation. Only about 1/5 transfers would complete. I've
refactored that entire system into an actual Calibre Device Plugin that
basically uses the exact same system as the web server's file transfer
protocol. I kept them separate so that we don't muddy up the existing
file transfer stuff even if it's basically the same at the end of the
day I didn't want to limit our ability to change it later.
I've also added basic auth to OPDS and renamed that feature to OPDS
Browser to just disassociate it from Calibre.
---------
Co-authored-by: Arthur Tazhitdinov <lisnake@gmail.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
On the Forget Network page
* Update the default option to be DON'T forget the network
* Make the options clearer ("Cancel" and "Forget network")
* Unify the button hints to match the rest of the UI
## Additional Context
Closes#427
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? PARTIALLY
## Summary
* Fixes#475
* Fixes#477
* Closes#428
## Additional Context
* Updates to
`src/activities/reader/EpubReaderChapterSelectionActivity.cpp` are
copied verbatim from #433 (thanks to @jonasdiemer)
* Update to `src/activities/settings/KOReaderSettingsActivity.cpp` per
discussion with @itsthisjustin at #428
Tested on my device with several books and koreader sync turned on and
off.
---
### AI Usage
Did you use AI tools to help write this code? _NO_
## Summary
Addresses
https://github.com/crosspoint-reader/crosspoint-reader/issues/504
- Reverts book progress % to showing as an integer instead of with a
decimal place
- This was changed to 1 decimal point of precision in
https://github.com/crosspoint-reader/crosspoint-reader/pull/232 from
what I can tell
- As this wasn't the primary intention of that PR, I'm assuming it was
left in accidentally
IMO having a decimal place of precision is too much for something as
vague as book completion percent. This de-clutters the status bar and
prevents extra updates as you change pages.
---
### AI Usage
YES
When reading on Landscape Counter ClockWise mode, the left/right button
appear inverted: the upper button (left) goes down and the lower button
(right) goes up.
Discussion: #449
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Add a new configuration for the front buttons: Back, Confirm, Right,
Left
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
* Add additional punctuation marks to the list of characters that can be
immediately followed by a line break even where there is no explicit
space
## Additional Context
* Huge appreciation to @osteotek for his amazing work on hyphenation.
Reading on the device is so much better now.
* I am getting bad line breaks when ellipses (…) are between words and
book file does not explicitly include some kind of breaking space.
* Per
[discussion](https://github.com/crosspoint-reader/crosspoint-reader/pull/305#issuecomment-3765411406),
several new characters are added in this PR to the `isExplicitHyphen`
list to allow line breaks immediately after them:
Character | Unicode | Usage | Why include it?
-- | -- | -- | --
Solidus (Slash) | U+002F | / | Essential for breaking URLs and "and/or"
constructs.
Backslash | U+005C | \ | Critical for technical text, file paths, and
coding documentation.
Underscore | U+005F | _ | Prevents "runaway" line lengths in usernames
or code snippets.
Middle Dot | U+00B7 | · | Acts as a semantic separator in dictionaries
or stylistic lists.
Ellipsis | U+2026 | … | Prevents justification failure when dialogue
lacks following spaces.
Midline Horizontal Ellipsis | U+22EF | ⋯ | Useful for mathematical
sequences and technical notation.
### Example:
This shows an example of what line breaking looks like *with* this PR.
Note the line break after "matter…" (which would not previously have
been allowed). It's particularly important here because the book
includes non-breaking spaces in "Mr. Aldrich" and "Mr. Rockefeller."
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **PARTIALLY**
## Summary
- Rewrite OpdsParser to stream parsing instead of full content
- Fix OOM due to big http xml response
Closes#385
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## More detailed documentation
* **What is the goal of this PR?**
Add more information about the exposed webserver.
* **What changes are included?**
Detailed documentation for the webserver endpoints
(`./docs/webserver-endpoints.md`)
Adding a table of content so it is easier to navigate directly to the
section you're interested on (Almost all `.md` files or at least all
those relevant)
## Additional Context
Not sure if this would get accepted but I thought it might be useful for
those trying to create separate apps that would sync files to the
device. It was at least to me trying to upload files using python as
stated
[here](https://github.com/crosspoint-reader/crosspoint-reader/discussions/434#discussioncomment-15545349)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
When uploading or downloading an updated ebook from SD/WebUI/OPDS with
same the filename the `.crosspoint` cache is not cleared. This can lead
to issues with the Table of Contents and hangs when switching between
chapters.
I encountered this issue in two places:
- When I need to do further ePub cleaning using Calibre after I load an
ePub and find that some of its formatting should be cleaned up. When I
reprocess the same book and want to place it back in the same location I
need a way to invalidate the cache.
- When syncing RSS feed generated epubs. I generate news ePubs with
filenames like `news-outlet.epub` and so every day when I fetch new news
the crosspoint cache needs to be cleared to load that file.
This change offers the following features:
- On web uploads, if the file already exists, the cache for that file is
cleared
- On OPDS downloads, if the file already exists, the cache for that file
is cleared
- There's now an action for `Clear Cache` in the Settings page which can
clear the cache for all books
Addresses
https://github.com/crosspoint-reader/crosspoint-reader/issues/281
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? PARTIALLY
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Disables going to sleep after uploading new firmware
* Makes developer experience easier
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
Give space to the chapter title if we don't show battery percentage.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Include superscripts and subscripts in fonts
## Additional Context
* Original change came from
https://github.com/crosspoint-reader/crosspoint-reader/pull/248
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
---------
Co-authored-by: cor <cor@pruijs.dev>
# Summary
This PR introduces a reusable Tab Bar component and combines the Recent
Books and File Browser into a unified tabbed page called "My Library"
accessible from the Home screen.
## Features
### New Tab Bar Component
A flexible, reusable tab bar component added to `ScreenComponents` that
can be used throughout the application.
### New Scroll Indicator Component
A page position indicator for lists that span multiple pages.
**Features:**
- Up/down arrow indicators
- Current page fraction display (e.g., "1/3")
- Only renders when content spans multiple pages
### My Library Activity
A new unified view combining Recent Books and File Browser into a single
tabbed page.
**Tabs:**
- **Recent** - Shows recently opened books
- **Files** - Browse SD card directory structure
**Navigation:**
- Up/Down or Left/Right: Navigate through list items
- Left/Right (when first item selected): Switch between tabs
- Confirm: Open selected book or enter directory
- Back: Go up directory (Files tab) or return home
- Long press Back: Jump to root directory (Files tab)
**UI Elements:**
- Tab bar with selection indicator
- Scroll/page indicator on right side
- Side button hints (up/down arrows)
- Dynamic bottom button labels ("BACK" in subdirectories, "HOME" at
root)
## Tab Bar Usage
The tab bar component is designed to be reusable across different
activities. Here's how to use it:
### Basic Example
```cpp
#include "ScreenComponents.h"
void MyActivity::render() const {
renderer.clearScreen();
// Define tabs with labels and selection state
std::vector<TabInfo> tabs = {
{"Tab One", currentTab == 0}, // Selected when currentTab is 0
{"Tab Two", currentTab == 1}, // Selected when currentTab is 1
{"Tab Three", currentTab == 2} // Selected when currentTab is 2
};
// Draw tab bar at Y position 15, returns height of the tab bar
int tabBarHeight = ScreenComponents::drawTabBar(renderer, 15, tabs);
// Position your content below the tab bar
int contentStartY = 15 + tabBarHeight + 10; // Add some padding
// Draw content based on selected tab
if (currentTab == 0) {
renderTabOneContent(contentStartY);
} else if (currentTab == 1) {
renderTabTwoContent(contentStartY);
} else {
renderTabThreeContent(contentStartY);
}
renderer.displayBuffer();
}
```
Video Demo: https://share.cleanshot.com/P6NBncFS
<img width="250"
src="https://github.com/user-attachments/assets/07de4418-968e-4a88-9b42-ac5f53d8a832"
/>
<img width="250"
src="https://github.com/user-attachments/assets/e40201ed-dcc8-4568-b008-cd2bf13ebb2a"
/>
<img width="250"
src="https://github.com/user-attachments/assets/73db269f-e629-4696-b8ca-0b8443451a05"
/>
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
As we get more settings, I think it makes sense to do categories for
them. This just allows users to find the settings easier and navigate to
them.
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
Co-authored-by: dpoulter <daniel@yoco.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
- Implements a fix to truncate chapter names that exceeds display width
* **What changes are included?**
- Implements a fix to truncate chapter names that exceeds display width
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
- Prior to the fix, if the book contains multiple chapters with names
longer than the display width, there is a noticeable delay when
scrolling through the list of chapters.
Serial output of the issue:
```
[25673] [ACT] Entering activity: EpubReaderChapterSelection
[25693] [GFX] !! Outside range (485, 65) -> (65, -6)
[25693] [GFX] !! Outside range (486, 65) -> (65, -7)
[25693] [GFX] !! Outside range (487, 65) -> (65, -8)
[25693] [GFX] !! Outside range (488, 65) -> (65, -9)
[25693] [GFX] !! Outside range (485, 66) -> (66, -6)
[25693] [GFX] !! Outside range (486, 66) -> (66, -7)
[25694] [GFX] !! Outside range (487, 66) -> (66, -8)
[25694] [GFX] !! Outside range (484, 67) -> (67, -5)
[25694] [GFX] !! Outside range (485, 67) -> (67, -6)
[25694] [GFX] !! Outside range (486, 67) -> (67, -7)
[25694] [GFX] !! Outside range (483, 68) -> (68, -4)
[25694] [GFX] !! Outside range (484, 68) -> (68, -5)
[25694] [GFX] !! Outside range (485, 68) -> (68, -6)
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Adds (optional) Hyphenation for English, French, German, Russian
languages
## Additional Context
* Included hyphenation dictionaries add approximately 280kb to the flash
usage (German alone takes 200kb)
* Trie encoded dictionaries are adopted from hypher project
(https://github.com/typst/hypher)
* Soft hyphens (and other explicit hyphens) take precedence over
dict-based hyphenation. Overall, the hyphenation rules are quite
aggressive, as I believe it makes more sense on our smaller screen.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
The current behavior of rendering `?` for an unknown Unicode character
can be hard to distinguish from a typo. Use the standard Unicode
"replacement character" instead, that's what it's designed for:
https://en.wikipedia.org/wiki/Specials_(Unicode_block)
I'm making this PR as a draft because I'm not sure I did everything that
was needed to change the character set covered by the fonts. Running
that script is in its own commit. If this is proper, I'll rebase/squash
into one commit and un-draft.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* Fixes#388
## Additional Context
* Tested on my own device
* See images at #388 for what home screen looked like before.
* With this PR the home screen shows the following (selected and
unselected recent book × cover image rendered or not)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **YES**
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
- Adds KOReader progress sync integration, allowing CrossPoint to sync
reading positions with other
KOReader-compatible devices
- Stores credentials securely with XOR obfuscation
- Uses KOReader's partial MD5 document hashing for cross-device book
matching
- Syncs position via percentage with estimated XPath for compatibility
# Features
- Settings: KOReader Username, Password, and Authenticate options
- Sync from chapters menu: "Sync Progress" option appears when
credentials are configured
- Bidirectional sync: Can apply remote progress or upload local progress
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* This PR solves issue
https://github.com/crosspoint-reader/crosspoint-reader/issues/357 in the
first commit
* I then added an additional commit which means when you reach the end
of the keyboard, if you go 'beyond', you wrap back to the other side.
* This replaces existing behaviour, so if you would rather this be
removed, let me know and I'll just do the `caps` -> `shift` change
## Additional Context
### Screenshots for the new shift display
I thought it might not fit and need column size changes, but ended up
fitting fine, see screenshots showing this below:
<img width="573" height="366" alt="image"
src="https://github.com/user-attachments/assets/b8f6a4ec-94f5-4f5e-b9a6-06cc5f250ddb"
/>
<img width="570" height="308" alt="image"
src="https://github.com/user-attachments/assets/7d775518-4784-4120-a20a-a9dc67af8565"
/>
### Gif showing the wrap-around of the text
---
### AI Usage
Did you use AI tools to help write this code? **PARTIALLY** - used to
double check the text wrapping had no edge-cases. (It did also suggest
rewriting the function, but I decided that was too big of a change for a
working part of the codebase, for now!)
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* **What changes are included?**
- Fix inverted colors in Continue Reading cover image for 1-bit XTC
files
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
- Fix `grayValue = pixelBit ? 0 : 255` → `grayValue = pixelBit ? 255 :
0` in `lib/Xtc/Xtc.cpp`
- The thumb BMP generation had inverted polarity compared to cover BMP
generation
- bit=0 should be black, bit=1 should be white (matching the BMP palette
order)
- Update misleading comment about XTC polarity
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
* Implements #380, allowing the user to see the device's MAC address in
order to register on wifi networks
## Additional Context
* Although @markatlnk suggested showing on the settings screen, I
implemented display at the bottom of the WiFi Networks selection screen
(accessed via "File Transfer" > "Join a Network") since I think it makes
more sense there.
* Tested on my own device
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
* This builds upon the helpful PR
https://github.com/crosspoint-reader/crosspoint-reader/pull/341, and
adds support for the setting to also apply to the XTC reader, which I
believed has just been missed and was not intentionally left out.
* XTC does not have chapter support yet, but it does skip 10 pages when
long-pressed, and so I think this is useful.
---
### AI Usage
Did you use AI tools to help write this code? No
~~Quick~~ fix for
https://github.com/daveallie/crosspoint-reader/issues/362
(this just applies to the chapter selection menu:)
~~If the orientation is portrait, hints as we know them make sense to
draw. If the orientation is inverted, we'd have to change the order of
the labels (along with everything's position), and if it's one of the
landscape choices, we'd have to render the text and buttons vertically.
All those other cases will be more complicated.~~
~~Punt on this for now by only rendering if portrait.~~
Update: this now draws the hints at the physical button position no
matter what the orientation is, by temporarily changing orientation to
portrait.
---------
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
Let's start small by showing the ALT text of IMG. This is rudimentary,
but avoids those otherwise completely blank chapters.
I feel we will need this even when we can render images if that
rendering takes >1s - I would then prefer rendering optional and showing
the ALT text first.
## Summary
* **What is the goal of this PR?**: Fix the bug I reported in
https://github.com/daveallie/crosspoint-reader/issues/292
* **What changes are included?**: Instead of silently dropping table
content in EPUBs., replace with an italicized '[Table omitted]' message
where tables appear.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY **_
---------
Co-authored-by: Evan Fenner <evan@evanfenner.com>
Co-authored-by: Warp <agent@warp.dev>
Currently there is no visual indication whatsoever if something is in a
list. An `<li>` is essentially just another paragraph.
As a partial remedy for this, add a bullet character to the beginning of
`<li>` text blocks so that the user can see that they're list items.
This is incomplete in that an `<ol>` should also have a counter so that
its list items can get numbers instead of bullets (right now I don't
think we track if we're in a `<ul>` or an `<ol>` at all), but it's
strictly better than the current situation.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
Currently, when Extra Paragraph Spacing is off, an em-space is added to
the beginning of each ParsedText even for blocks like headers that are
centered. This whitespace makes the centering slightly off. Change the
calculation here to only add the em-space for left/justified text.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* **What is the goal of this PR?** Fix WiFi file transfer stability
issues (especially crashes during uploads) and improve upload speed via
WebSocket binary protocol. File transfers now don't really crash as
much, if they do it recovers and speed has gone form 50KB/s to 300+KB/s.
* **What changes are included?**
- **WebSocket upload support** - Adds WebSocket binary protocol for file
uploads, achieving faster speeds 335 KB/s vs HTTP multipart)
- **Watchdog stability fixes** - Adds `esp_task_wdt_reset()` calls
throughout upload path to prevent watchdog timeouts during:
- File creation (FAT allocation can be slow)
- SD card write operations
- HTTP header parsing
- WebSocket chunk processing
- **4KB write buffering** - Batches SD card writes to reduce I/O
overhead
- **WiFi health monitoring** - Detects WiFi disconnection in STA mode
and exits gracefully
- **Improved handleClient loop** - 500 iterations with periodic watchdog
resets and button checks for responsiveness
- **Progress bar improvements** - Fixed jumping/inaccurate progress by
capping local progress at 95% until server confirms completion
- **Exit button responsiveness** - Button now checked inside the
handleClient loop every 64 iterations
- **Reduced exit delays** - Decreased shutdown delays from ~850ms to
~140ms
**Files changed:**
- `platformio.ini` - Added WebSockets library dependency
- `CrossPointWebServer.cpp/h` - WebSocket server, upload buffering,
watchdog resets
- `CrossPointWebServerActivity.cpp` - WiFi monitoring, improved loop,
button handling
- `FilesPage.html` - WebSocket upload JavaScript with HTTP fallback
## Additional Context
- WebSocket uses 4KB chunks with backpressure management to prevent
ESP32 buffer overflow
- Falls back to HTTP automatically if WebSocket connection fails
- The main bottleneck now is SD card write speed (~44% of transfer
time), not WiFi
- STA mode was more prone to crashes than AP mode due to external
network factors; WiFi health monitoring helps detect and handle
disconnections gracefully
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_ Claude did it
ALL, I have no idea what I am doing, but my books transfer fast now.
---------
Co-authored-by: Claude <noreply@anthropic.com>
## Summary
Adds a new "Long-press Chapter Skip" toggle in Settings to control
whether holding the side buttons skips chapters.
I kept accidentally triggering chapter skips while reading, which caused
me to lose my place in the middle of long chapters.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY **_
## Summary
Adds define to omit optional fonts from the build. This reduces time to
flash from >31s to <13s. Useful for development that doesn't require
fonts. Addresses #193
Invoke it like this during development:
`PLATFORMIO_BUILD_FLAGS="-D OMIT_FONTS" pio run --target upload && pio
device monitor`
Changing the define causes `pio` to do a full rebuild (but it will be
quick if you keep the define).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
## Summary
Skip BOM character (sometimes used in front of em-dashes) - they are not
part of the glyph set and would render `?` otherwise.
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
## Summary
* **What is the goal of this PR?**
Add support for reading plain text (.txt) files, enabling users to
browse, read, and track progress in TXT documents alongside existing
EPUB and XTC formats.
* **What changes are included?**
- New Txt library for loading and parsing plain text files
- New TxtReaderActivity with streaming page rendering using 8KB chunks
to handle large files without memory issues on ESP32-C3
- Page index caching system (index.bin) for instant re-open after sleep
or app restart
- Progress bar UI during initial file indexing (matching EPUB style)
- Word wrapping with proper UTF-8 support
- Cover image support for TXT files:
- Primary: image with same filename as TXT (e.g., book.jpg for book.txt)
- Fallback: cover.bmp/jpg/jpeg in the same folder
- JPG to BMP conversion using existing converter
- Sleep screen cover mode now works with TXT files
- File browser now shows .txt files
## Additional Context
* Add any other information that might be helpful for the reviewer
* Memory constraints: The streaming approach was necessary because
ESP32-C3 only has 320KB RAM. A 700KB TXT file cannot be loaded entirely
into memory, so we read 8KB chunks and build a page offset index
instead.
* Cache invalidation: The page index cache automatically invalidates
when file size, viewport width, or lines per page changes (e.g., font
size or orientation change).
* Performance: First open requires indexing (with progress bar),
subsequent opens load from cache instantly.
* Cover image format: PNG is detected but not supported for conversion
(no PNG decoder available). Only BMP and JPG/JPEG work.
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module,
Display the book cover image in the **"Continue Reading"** card on the
home screen, with fast navigation using framebuffer caching.
* **What changes are included?**
- Display book cover image in the "Continue Reading" card on home screen
- Load cover from cached BMP (same as sleep screen cover)
- Add framebuffer store/restore functions (`copyStoredBwBuffer`,
`freeStoredBwBuffer`) for fast navigation after initial render
- Fix `drawBitmap` scaling bug: apply scale to offset only, not to base
coordinates
- Add white text boxes behind title/author/continue reading label for
readability on cover
- Support both EPUB and XTC file cover images
- Increase HomeActivity task stack size from 2048 to 4096 for cover
image rendering
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
- Performance: First render loads cover from SD card (~800ms),
subsequent navigation uses cached framebuffer (~instant)
- Memory: Framebuffer cache uses ~48KB (6 chunks × 8KB) while on home
screen, freed on exit
- Fallback: If cover image is not available, falls back to standard
text-only display
- The `drawBitmap` fix corrects a bug where screenY = (y + offset) scale
was incorrectly scaling the base coordinates. Now correctly uses screenY
= y + (offset scale)
When picking a random sleep image from a set of custom images, compare
the randomly chosen index against a cached value in settings. If the
value matches, use the next image (rolling over if it's the last image).
Cache the chosen image index to settings in either case.
## Summary
Implements a tweak on the custom sleep image feature that ensures that
the user gets a new image every time the device goes to sleep.
This change adds a new setting (perhaps there's a better place to cache
this?) that stores the most recently used file index. During picking the
random image index, we compare this against the random index and choose
the next one (modulo the number of image files) if it matches, ensuring
we get a new image.
## Additional Context
As mentioned, I used settings to cache this value since it is a
persisted store, perhaps that's overkill. Open to suggestions on if
there's a better way.
**Description**:
Add a new workflow to check the PR formatting to ensure consistency on
PR titles. We can also use this for semantic release versioning later,
if we so desire.
**Related Issue(s)**:
Implements first portion of #327
---------
Signed-off-by: Andrew Brandt <brandt.andrew89@gmail.com>
## Summary
* fix: Increase home activity stack size
## Additional Context
* Home activity can crash occasionally depending on book
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
- Nav file in EPUB 3 file is a HTML file with relative hrefs
- If this file exists anywhere but in the same location as the
content.opf file, navigating in the book will fail
- Bump the book cache version to rebuild potentially broken books
## Additional Context
- Fixes https://github.com/daveallie/crosspoint-reader/issues/264
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code?
- [ ] Yes
- [ ] Partially
- [x] No
1. Refactor Bitmap.cpp/h to expose the options for FloydSteinberg and
brightness/gamma correction at runtime
2. Fine-tune the thresholds for Floyd Steiberg and simple quantization
to better match the display's colors
Turns out that 2 is enough to make the images render properly, so the
brightness boost and gamma adjustment doesn't seem necessary currently
(at least for my test image).
## Summary
* **What is the goal of this PR?**
Fixes the Wi-Fi connection issue when launching the Calibre Library
(OPDS browser). The previous implementation always attempted to connect
using the first saved WiFi credential, which caused connection failures
when users were in locations where only other saved networks (not the
first one) were available. Now, the activity launches a WiFi selection
screen allowing users to choose from available networks.
* **What changes are included?**
## Additional Context
**Bug Fixed**: Previously, the code used `credentials[0]` (always the
first saved WiFi), so users in areas with only their secondary/tertiary
saved networks available could never connect.
---------
Co-authored-by: danoooob <danoooob@example.com>
**Description**:
The purpose of this change is to modify the spacing in the
`.github/workflow` files to ensure consistency.
**Related Issue(s)**:
Implements #319
Signed-off-by: Andrew Brandt <brandt.andrew89@gmail.com>
## Summary
* **What is the goal of this PR?**
* This PR adds a setting to (additionally) map the forward page turn
onto the powerbutton when in `EPUBReaderActivity` and powerbutton short
press is not mapped to sleep mode. I find the powerbutton to be exactly
where my thumb is while reading so it is very convenient to map the
forwardpage turn to that. Maybe Im not alone with this ^^
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
## Summary
* Remove HTML entity parsing
* This has been completely useless since the introduction of expat
* expat tries to parse all entities in the document, but only knows of
HTML ones
* Parsing will never end with HTML entities in the text, so the
additional step to parse them that we had went completely unused
* We should figure out the best way to parse that content in the future,
but for now remove that module as it generates a lot of heap allocations
with its map and strings
## Summary
Fixes https://github.com/daveallie/crosspoint-reader/issues/233
## Additional Context
By disabling the Text Anti-Aliasing in the settings, you can get faster
black-and-white page turns that work exactly like the stock firmware,
instead of having an additional flash after rendering (see issue linked
above for example).
Tested on the X4 and confirmed working.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Adds feature to file selection activity for better user navigation when
ascending folders. The activity now remembers the index of the parent
folder instead of always resetting to the first element.
I don't have any means of testing this, so if someone could test it
that'd be great
Resolves#259
## Summary
Adds support for browsing and downloading books from a Calibre-web
server via OPDS.
How it works
1. Configure server URL in Settings → Calibre Web URL (e.g.,
https://myserver.com:port I use Cloudflare tunnel to make my server
accessible anywhere fwiw)
2. "Calibre Library" will now show on the the home screen
3. Browse the catalog - navigate through categories like "By Newest",
"By Author", "By Series", etc.
4. Download books - select a book and press Confirm to download the EPUB
to your device
Navigation
- Up/Down - Move through entries
- Confirm - Open folder or download book
- Back - Go to parent catalog, or exit to home if at root
- Navigation entries show with > prefix, books show title and author
- Button hints update dynamically ("Open" for folders, "Download" for
books)
Technical details
- Fetches OPDS catalog from {server_url}/opds
- Parses both navigation feeds (catalog links) and acquisition feeds
(downloadable books)
- Maintains navigation history stack for back navigation
- Handles absolute paths in OPDS links correctly (e.g.,
/books/opds/navcatalog/...)
- Downloads EPUBs directly to the SD card root
Note
The server URL should be typed to include https:// if the server
requires it - HTTP→HTTPS redirects may cause SSL errors on ESP32.
## Additional Context
* I also changed the home titles to use uppercase for each word and
added a setting to change the size of the side margins
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
Added a setting to select `fit` or `crop` for cover image on sleep
screen.
Might add a `expand` feature in the future that does not crop but rather
fills the blank space with a mirror of the image.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
* This PR adds a setting to control the top left and right margins of
the reader screen in 4 sizes (5, 10, 20, 40 pt?) and defaults to `SMALL`
which is equivalent to the fixed margin of 5 that was already in use
before.
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Fixes a bug in the settings menu, where previously wrap-around only
worked when scrolling upwards. Now, scrolling downwards on the last list
element wraps around to the top as expected.
Resolves#236.
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: ratedcounsel <hello@ratedcounsel.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
This PR refactors the semantic version comparison logic used during OTA
update checks.
Memory stats before :
RAM: [=== ] 30.8% (used 101068 bytes from 327680 bytes)
Flash: [========= ] 85.7% (used **5617830** bytes from 6553600 bytes)
Memory stats before :
RAM: [=== ] 30.8% (used 101068 bytes from 327680 bytes)
Flash: [========= ] 85.7% (used **5616870** bytes from 6553600 bytes)
* **What changes are included?**
Replaced std::string::substr() and std::stoi() based parsing with a
lightweight, heap-free approach.
Version parsing is now done in a single pass without creating temporary
std::string objects.
Behavior remains identical: versions are still compared as
MAJOR.MINOR.PATCH.
## Additional Context
`std::string::substr() ` creates a new string and performs heap
allocation
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
## Summary
This adds the correctly styled button hints to the keyboard screen as
well as the ability to add hints to the side buttons (and up/down hints
to that screen)
## Additional Context
N/A
## Summary
* **What is the goal of this PR?** Add EPUB 3 support by implementing
native navigation document (nav.xhtml) parsing with NCX fallback,
addressing issue Fixes: #143.
* **What changes are included?**
- New `TocNavParser` for parsing EPUB 3 HTML5 navigation documents
(`<nav epub:type="toc">`)
- Detection of nav documents via `properties="nav"` attribute in OPF
manifest
- Fallback logic: try EPUB 3 nav first, fall back to NCX (EPUB 2) if
unavailable
- Graceful degradation: books without any TOC now load with a warning
instead of failing
## Additional Context
* The implementation follows the existing streaming XML parser pattern
using Expat to minimize RAM usage on the ESP32-C3
* EPUB 3 books that include both nav.xhtml and toc.ncx will prefer the
nav document (per EPUB 3 spec recommendation)
* No breaking changes - existing EPUB 2 books continue to work as before
* Tested on examples from
https://idpf.github.io/epub3-samples/30/samples.html
## Summary
* **What is the goal of this PR?**
Add a new user setting for paragraph alignment, instead of hard-coding
full justification.
* **What changes are included?**
One new line in the settings screen, with 4 options
(justify/left/center/right). Default is justified since that's what it
was already. I personally only wanted to disable justification and use
"left", but I included the other options for completeness since they
were already supported.
## Additional Context
Tested on my X4 and looks as expected for each alignment.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* **What is the goal of this PR?** Fixes a bug -
https://github.com/daveallie/crosspoint-reader/issues/187 - where the
screen would freeze after entering a WiFi password, causing the device
to appear hung.
* **What changes are included?**
- Fixed a race condition in `WifiSelectionActivity::displayTaskLoop()`
that caused rendering of an empty screen when transitioning from the
keyboard subactivity
- Added `vTaskDelay()` when a subactivity is active to prevent CPU
starvation from a tight `continue` loop
- Added a check to skip rendering when in `PASSWORD_ENTRY` state,
allowing the state machine to properly transition to `CONNECTING` before
the display updates
## Additional Context
* **Root cause:** When the keyboard subactivity exited after password
entry, the display task would wake up and attempt to render. However,
the `state` was still `PASSWORD_ENTRY` (before `attemptConnection()`
changed it to `CONNECTING`), and since there was no render case for
`PASSWORD_ENTRY`, the display would show a cleared/empty buffer,
appearing frozen.
* **Performance implications:** The added `vTaskDelay(10)` calls when
subactivity is active or in `PASSWORD_ENTRY` state actually improve
performance by preventing CPU starvation - previously the display task
would spin in a tight loop with `continue` while a subactivity was
present.
* **Testing focus:** Test the full WiFi connection flow:
1. Enter network selection
2. Select a network requiring a password
3. Enter password and press OK
4. Verify "Connecting..." screen appears
5. Verify connection completes and prompts to save password
## Summary
* **What is the goal of this PR?** Fixes#199 - Device falls asleep
during WiFi file transfer after 10 minutes of inactivity, disconnecting
the web server.
* **What changes are included?**
- Add `preventAutoSleep()` virtual method to `Activity` base class
- Modify main loop to reset inactivity timer when `preventAutoSleep()`
returns true
- Override `preventAutoSleep()` in `CrossPointWebServerActivity`
(returns true when web server running)
- Override `preventAutoSleep()` in `OtaUpdateActivity` (returns true
during update check/download)
## Additional Context
* The existing `skipLoopDelay()` method controls loop timing (yield vs
delay) for HTTP responsiveness. The new `preventAutoSleep()` method is
semantically separate - it explicitly signals that an activity should
keep the device awake.
* `CrossPointWebServerActivity` uses both methods: `skipLoopDelay()` for
responsive HTTP handling, `preventAutoSleep()` for staying awake.
* `OtaUpdateActivity` only needs `preventAutoSleep()` since the OTA
library handles HTTP internally.
## Summary
* Replace book and section bin format images with ImHex hexpat
definition
* This should give readers an understanding of the file format but also
supply some utility when validating content/output
## Summary
* Update EpdFontFamily::Style to be u8 instead of u32 (saving 3 bytes
per word)
* Update layout width/height to be u16 from int
* Update page element count to be u16 from u32
* Update text block element count to be u16 from u32
* Bumped section bin version to version 8
## Summary
- Update the button hints on the OTA update screen to reflect the
current front button layout.
- Update user guide to reflect current available settings. A lot has
been added recently!
## Summary
* **What is the goal of this PR?**
Fix file browser failing to navigate into subdirectories with non-ASCII
(Korean/Unicode) folder names.
* **What changes are included?**
- Enable UTF-8 long file names in SdFat (`USE_UTF8_LONG_NAMES=1`)
- Add directory validation before iterating files
- Add `rewindDirectory()` call for stability
## Additional Context
2025-12-31 09:08:31 +11:00
217 changed files with 76837 additions and 20149 deletions
Button layout can be customized in **[Settings](#35-settings)**.
---
@@ -19,14 +41,17 @@ The device utilises the standard buttons on the Xtink X4 in the same layout:
### Power On / Off
To turn the device on or off, **press and hold the Power button for half a second**. In **Settings** you can configure
the power button to trigger on a short press instead of a long one.
To turn the device on or off, **press and hold the Power button for approximately half a second**.
In **[Settings](#35-settings)** you can configure the power button to turn the device off with a short press instead of a long one.
To reboot the device (for example if it's frozen, or after a firmware update), press and release the Reset button, and then quickly press and hold the Power button for a few seconds.
### First Launch
Upon turning the device on for the first time, you will be placed on the **Home** screen.
Upon turning the device on for the first time, you will be placed on the **[Home](#31-home-screen)** screen.
> **Note:** On subsequent restarts, the firmware will automatically reopen the last book you were reading.
> [!NOTE]
> On subsequent restarts, the firmware will automatically reopen the last book you were reading.
---
@@ -34,49 +59,104 @@ Upon turning the device on for the first time, you will be placed on the **Home*
### 3.1 Home Screen
The Home Screen is the main entry point to the firmware. From here you can navigate to the **Book Selection** screen,
**Settings** screen, or **File Upload** screen.
The Home Screen is the main entry point to the firmware. From here you can navigate to **[Reading Mode](#4-reading-mode)** with the most recently read book, **[Book Selection](#32-book-selection)**, **[Settings](#35-settings)**, or the **[File Upload](#34-file-upload-screen)** screen.
### 3.2 Book Selection (Read)
### 3.2 Book Selection
The Book Selection acts as a folder and file browser.
* **Navigate List:** Use **Left** (or **Volume Up**), or **Right** (or **Volume Down**) to move the selection cursor up
and down through folders and books.
* **Navigate List:** Use **Left** (or **Volume Up**), or **Right** (or **Volume Down**) to move the selection cursor up and down through folders and books. You can also long-press these buttons to scroll a full page up or down.
* **Open Selection:** Press **Confirm** to open a folder or read a selected book.
### 3.3 Reading Screen
### 3.3 Reading Mode
See [4. Reading Mode](#4-reading-mode) below for more information.
See [Reading Mode](#4-reading-mode) below for more information.
### 3.4 File Upload Screen
The File Upload screen allows you to upload new e-books to the device. When you enter the screen you'll be prompted with
a WiFi selection dialog and then your X4 will start hosting a web server.
The File Upload screen allows you to upload new e-books to the device. When you enter the screen, you'll be prompted with a WiFi selection dialog and then your X4 will start hosting a web server.
See the [webserver docs](./docs/webserver.md) for more information on how to connect to the web server and upload files.
> [!TIP]
> Advanced users can also manage files programmatically or via the command line using `curl`. See the [webserver docs](./docs/webserver.md) for details.
### 3.4.1 Calibre Wireless Transfers
CrossPoint supports sending books from Calibre using the CrossPoint Reader device plugin.
1. Install the plugin in Calibre:
- Head to https://github.com/crosspoint-reader/calibre-plugins/releases to download the latest version of the crosspoint_reader plugin.
- Download the zip file.
- Open Calibre → Preferences → Plugins → Load plugin from file → Select the zip file.
2. On the device: File Transfer → Connect to Calibre → Join a network.
3. Make sure your computer is on the same WiFi network.
4. In Calibre, click "Send to device" to transfer books.
### 3.5 Settings
The Settings screen allows you to configure the device's behavior. There are a few settings you can adjust:
- **Sleep Screen**: Which sleep screen to display when the device sleeps, options are:
- "Dark" (default) - The default dark sleep screen
- **Sleep Screen**: Which sleep screen to display when the device sleeps:
- "Dark" (default) - The default dark Crosspoint logo sleep screen
- "Light" - The same default sleep screen, on a white background
- "Custom" - Custom images from the SD card, see [3.6 Sleep Screen](#36-sleep-screen) below for more information
- "Custom" - Custom images from the SD card; see [Sleep Screen](#36-sleep-screen) below for more information
- "Cover" - The book cover image (Note: this is experimental and may not work as expected)
- **Extra Paragraph Spacing**: If enabled, vertical space will be added between paragraphs in the book, if disabled,
paragraphs will not have vertical space between them, but will have first word indentation.
- **Short Power Button Click**: Whether to trigger the power button on a short press or a long press.
- **Front Button Layout**: Swap the order of the bottom edge buttons from Back/Confirm/Left/Right to Left/Right/Back/Confirm.
- "None" - A blank screen
- **Sleep Screen Cover Mode**: How to display the book cover when "Cover" sleep screen is selected:
- "Fit" (default) - Scale the image down to fit centered on the screen, padding with white borders as necessary
- "Crop" - Scale the image down and crop as necessary to try to to fill the screen (Note: this is experimental and may not work as expected)
- **Sleep Screen Cover Filter**: What filter will be applied to the book cover when "Cover" sleep screen is selected
- "None" (default) - The cover image will be converted to a grayscale image and displayed as it is
- "Contrast" - The image will be displayed as a black & white image without grayscale conversion
- "Inverted" - The image will be inverted as in white&black and will be displayed without grayscale conversion
- **Status Bar**: Configure the status bar displayed while reading:
- "None" - No status bar
- "No Progress" - Show status bar without reading progress
- "Full" - Show status bar with reading progress
- **Hide Battery %**: Configure where to suppress the battery pecentage display in the status bar; the battery icon will still be shown:
- "Never" - Always show battery percentage (default)
- "In Reader" - Show battery percentage everywhere except in reading mode
- "Always" - Always hide battery percentage
- **Extra Paragraph Spacing**: If enabled, vertical space will be added between paragraphs in the book. If disabled, paragraphs will not have vertical space between them, but will have first-line indentation.
- **Text Anti-Aliasing**: Whether to show smooth grey edges (anti-aliasing) on text in reading mode. Note this slows down page turns slightly.
- **Short Power Button Click**: Controls the effect of a short click of the power button:
- "Ignore" - Require a long press to turn off the device
- "Sleep" - A short press powers the device off
- "Page Turn" - A short press in reading mode turns to the next page; a long press turns the device off
- **Reading Orientation**: Set the screen orientation for reading EPUB files:
- "Portrait" (default) - Standard portrait orientation
- **Front Button Layout**: Configure the order of the bottom edge buttons:
- Back, Confirm, Left, Right (default)
- Left, Right, Back, Confirm
- Left, Back, Confirm, Right
- Back, Confirm, Right, Left
- **Side Button Layout (reader)**: Swap the order of the up and down volume buttons from Previous/Next to Next/Previous. This change is only in effect when reading.
- **Long-press Chapter Skip**: Set whether long-pressing page turn buttons skip to the next/previous chapter.
- "Chapter Skip" (default) - Long-pressing skips to next/previous chapter
- "Page Scroll" - Long-pressing scrolls a page up/down
- Swap the order of the up and down volume buttons from Previous/Next to Next/Previous. This change is only in effect when reading.
- **Reader Font Family**: Choose the font used for reading:
- "Bookerly" (default) - Amazon's reading font
- "Noto Sans" - Google's sans-serif font
- "Open Dyslexic" - Font designed for readers with dyslexia
- **Reader Font Size**: Adjust the text size for reading; options are "Small", "Medium", "Large", or "X Large".
- **Reader Line Spacing**: Adjust the spacing between lines; options are "Tight", "Normal", or "Wide".
- **Reader Screen Margin**: Controls the screen margins in reader mode between 5 and 40 pixels in 5 pixel increments.
- **Reader Paragraph Alignment**: Set the alignment of paragraphs; options are "Justified" (default), "Left", "Center", or "Right".
- **Time to Sleep**: Set the duration of inactivity before the device automatically goes to sleep.
- **Refresh Frequency**: Set how often the screen does a full refresh while reading to reduce ghosting.
- **OPDS Browser**: Configure OPDS server settings for browsing and downloading books. Set the server URL (for Calibre Content Server, add `/opds` to the end), and optionally configure username and password for servers requiring authentication. Note: Only HTTP Basic authentication is supported. If using Calibre Content Server with authentication enabled, you must set it to use Basic authentication instead of the default Digest authentication.
- **Check for updates**: Check for firmware updates over WiFi.
### 3.6 Sleep Screen
You can customize the sleep screen by placing custom images in specific locations on the SD card:
- **Single Image:** Place a file named `sleep.bmp` in the root directory.
- **Multiple Images:** Create a `sleep` directory in the root of the SD card and place any number of `.bmp` images
inside. If images are found in this directory, they will take priority over the `sleep.png` file, and one will be
randomly selected each time the device sleeps.
- **Multiple Images:** Create a `sleep` directory in the root of the SD card and place any number of `.bmp` images inside. If images are found in this directory, they will take priority over the `sleep.bmp` file, and one will be randomly selected each time the device sleeps.
> [!NOTE]
> You'll need to set the **Sleep Screen** setting to **Custom** in order to use these images.
@@ -94,17 +174,34 @@ Once you have opened a book, the button layout changes to facilitate reading.
***Cyrillic Script (Standard and Extended):** Covers Russian, Ukrainian, Belarusian, Bulgarian, Serbian, Macedonian, Kazakh, Kyrgyz, Mongolian, and others.
What is not supported: Chinese, Japanese, Korean, Vietnamese, Hebrew, Arabic and Farsi.
---
@@ -120,9 +217,6 @@ Accessible by pressing **Confirm** while inside a book.
## 6. Current Limitations & Roadmap
Please note that this firmware is currently in active development. The following features are **not yet supported** but
are planned for future updates:
Please note that this firmware is currently in active development. The following features are **not yet supported** but are planned for future updates:
* **Images:** Embedded images in e-books will not render.
* **Text Formatting:** There are currently no settings to adjust font type, size, line spacing, or margins.
* **Rotation**: Different rotation options are not supported.
- Progress updates are sent every 64KB or at completion
- Disconnection during upload will delete the incomplete file
- Existing files with the same name will be overwritten
---
## Network Modes
The device can operate in two network modes:
### Station Mode (STA)
- Device connects to an existing WiFi network
- IP address assigned by router/DHCP
-`mode` field in `/api/status` returns `"STA"`
-`rssi` field shows signal strength
### Access Point Mode (AP)
- Device creates its own WiFi hotspot
- Default IP is typically `192.168.4.1`
-`mode` field in `/api/status` returns `"AP"`
-`rssi` field returns `0`
---
## Notes
- These examples use `crosspoint.local`. If your network does not support mDNS or the address does not resolve, replace it with the specific **IP Address** displayed on your device screen (e.g., `http://192.168.1.102/`).
- All paths on the SD card start with `/`
- Trailing slashes are automatically stripped (except for root `/`)
- The webserver uses chunked transfer encoding for file listings
@@ -170,57 +170,9 @@ This is useful for organizing your ebooks by genre, author, or series.
---
## Troubleshooting
## Command Line File Management
### Cannot See the Device on the Network
**Problem:** Browser shows "Cannot connect" or "Site can't be reached"
**Solutions:**
1. Verify both devices are on the **same WiFi network**
- Check your computer/phone WiFi settings
- Confirm the CrossPoint Reader shows "Connected" status
2. Double-check the IP address
- Make sure you typed it correctly
- Include `http://` at the beginning
3. Try disabling VPN if you're using one
4. Some networks have "client isolation" enabled - check with your network administrator
### Connection Drops or Times Out
**Problem:** WiFi connection is unstable
**Solutions:**
1. Move closer to the WiFi router
2. Check signal strength on the device (should be at least `||` or better)
3. Avoid interference from other devices
4. Try a different WiFi network if available
### Upload Fails
**Problem:** File upload doesn't complete or shows an error
**Solutions:**
1. Ensure the file is a valid `.epub` file
2. Check that the SD card has enough free space
3. Try uploading a smaller file first to test
4. Refresh the browser page and try again
### Saved Password Not Working
**Problem:** Device fails to connect with saved credentials
**Solutions:**
1. When connection fails, you'll be prompted to "Forget Network"
2. Select **Yes** to remove the saved password
3. Reconnect and enter the password again
4. Choose to save the new password
---
For power users, you can manage files directly from your terminal using `curl` while the device is in File Upload mode a detailed documentation can be found [here](./webserver-endpoints.md).
## Security Notes
@@ -269,4 +221,5 @@ Your uploaded files will be immediately available in the file browser!
## Related Documentation
- [User Guide](../USER_GUIDE.md) - General device operation
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Dave Allie
Boris Faure
Arthur Tazhitdinov
V
Daniel Chelling
Lalo
Eliz
Alex Faria
Jonas Diemer
Maeve Andrews
Егор Мартынов
Boris Faure
Yaroslav
Carson Hicks
GenesiaW
Xuan-Son Nguyen
Vincent Politzer
Justin Mitchell
Brendan O'Leary
Luke Stein
Sam Davis
KasyanDiGris
Juan Biondi
Logan Garbarini
Kenneth
Daniel Poulter
Nathan James
Eunchurn Park
efenner
swwilshub
Armando Cerna
Will Morrow
Andrew Brandt
danoob
David Fischer
Seth
Samuel Carpentier
Stanislav Khromov
Justin
Justinian
V
Pavel Liashkov
Jake Lyell
dangson
