Giovanni Mascellani
ba381497cc
vkd3d-common: Remove an assertion in vkd3d_dbg_printf().
...
We want to get rid of assertions and only use the new VKD3D_ASSERT(),
but this cannot be done here, because a failing VKD3D_ASSERT() would
call back again to vkd3d_dbg_printf().
At the same time the asserted condition should be simple enough to
debug even without the assertion, since logging with a bad level
will likely result in either a crash or writing garbage to the log.
2024-07-30 16:32:59 +02:00
Atharva Nimbalkar
2170fdc633
vkd3d-shader/glsl: Implement support for VKD3DSPR_TEMP registers.
2024-07-30 16:31:59 +02:00
Atharva Nimbalkar
337a030908
vkd3d-shader/glsl: Implement VKD3DSIH_MOV.
2024-07-30 16:31:59 +02:00
Henri Verbeet
c7589d8f19
vkd3d-shader/ir: Remove VKD3DSIH_DCL_SAMPLER instructions.
2024-07-30 16:31:44 +02:00
Henri Verbeet
fffe521b80
vkd3d-shader/ir: Remove VKD3DSIH_DCL instructions.
2024-07-30 16:31:44 +02:00
Giovanni Mascellani
240d31c793
vkd3d: Replace assert() with VKD3D_ASSERT() in vkd3d_private.h.
2024-07-29 19:12:13 +02:00
Giovanni Mascellani
529647142c
vkd3d: Replace assert() with VKD3D_ASSERT() in utils.c.
2024-07-29 19:12:13 +02:00
Giovanni Mascellani
bd75396b38
vkd3d: Replace assert() with VKD3D_ASSERT() in state.c.
2024-07-29 19:12:13 +02:00
Giovanni Mascellani
02b898bec0
vkd3d: Replace assert() with VKD3D_ASSERT() in resource.c.
2024-07-29 19:12:13 +02:00
Giovanni Mascellani
150bf69da9
vkd3d: Replace assert() with VKD3D_ASSERT() in command.c.
2024-07-29 19:12:13 +02:00
Giovanni Mascellani
507cc2976f
tests: Test register conflicts in a root signature.
2024-07-29 13:19:10 +02:00
Giovanni Mascellani
51b65688e1
ci: Abort on assertions on the CI.
2024-07-29 13:17:19 +02:00
Giovanni Mascellani
fb55c2b227
vkd3d: Emit an ERR() when reaching unreachable code.
...
This way the ERR() configuration is reused for unreachable code.
2024-07-29 13:17:19 +02:00
Giovanni Mascellani
4ada72a397
vkd3d: Allow aborting on ERR().
2024-07-29 13:17:19 +02:00
Giovanni Mascellani
d7fc2693c4
vkd3d: Introduce a softer form of assertion.
...
Triggering an ERR() instead of aborting the program.
2024-07-29 13:17:19 +02:00
Giovanni Mascellani
a484063cd2
vkd3d: Introduce debug severity MESSAGE.
...
That's intended for messages that it's pretty important that the
user receives, but that are not proper error messages.
2024-07-29 13:17:19 +02:00
Giovanni Mascellani
021a7f030a
vkd3d: Allow disabling ERR() by defining VKD3D_NO_ERROR_MESSAGES.
2024-07-29 13:17:19 +02:00
Giovanni Mascellani
60ecf8c12b
vkd3d: Disable FIXME_ONCE() when VKD3D_NO_DEBUG_MESSAGES is defined.
...
Similarly to FIXME().
2024-07-29 13:17:19 +02:00
Giovanni Mascellani
4c1cc6101f
vkd3d: Disable WARN_ON() when VKD3D_NO_DEBUG_MESSAGES is defined.
...
Similarly to WARN().
2024-07-29 13:17:19 +02:00
Elizabeth Figura
947b937a1a
tests: Test shade mode.
2024-07-24 16:08:10 +02:00
Elizabeth Figura
ae5cd6573f
vkd3d-shader: Allow controlling d3d color shade mode through vkd3d-shader parameters.
2024-07-24 16:08:10 +02:00
Elizabeth Figura
d20d0fc69f
vkd3d-shader: Use the program parameters in spirv_compiler_alloc_spec_constant_id().
2024-07-24 16:07:13 +02:00
Victor Chiletto
a0de05f0b4
vkd3d-shader/hlsl: Implement the asint() intrinsic.
2024-07-24 16:06:03 +02:00
Nikolay Sivov
91dce79227
vkd3d-shader/fx: Correct one of the object counters in the fx_2_0 header.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-07-24 16:04:21 +02:00
Elizabeth Figura
97cd941710
vkd3d-shader: Do not make the alpha test ref parameter VSIR_DIMENSION_VEC4.
2024-07-23 21:12:28 +02:00
Elizabeth Figura
1db7c03185
vkd3d-shader/spirv: Pass a vkd3d_data_type to spirv_compiler_emit_shader_parameter().
2024-07-23 21:11:15 +02:00
Elizabeth Figura
f6dd6d52b3
vkd3d-shader: Factor out a vsir_program_get_parameter() helper.
2024-07-23 21:10:00 +02:00
Elizabeth Figura
6b58b6f261
vkd3d-shader/spirv: Allocate output_info after normalization.
...
Normalization may change the signatures.
2024-07-23 21:09:00 +02:00
Shaun Ren
49caeee1fd
vkd3d-shader/hlsl: Support default values for function parameters.
2024-07-23 15:36:32 +02:00
Nikolay Sivov
29699d3d22
vkd3d-shader/fx: Set total pass count for fx_2_0.
...
Binaries with that field set incorrectly fail to load on Windows.
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-07-23 15:23:54 +02:00
Nikolay Sivov
dcf4ce753b
vkd3d-shader/fx: Correct empty pass check.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-07-23 15:23:54 +02:00
Nikolay Sivov
958117df2f
vkd3d-shader/hlsl: Allow annotations on global variables.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
2024-07-23 15:23:54 +02:00
Giovanni Mascellani
ba0fec4c51
vkd3d: Propagate errors out of d3d12_root_signature_append_vk_binding().
2024-07-22 16:01:37 +02:00
Giovanni Mascellani
4b7fe26b33
vkd3d: Remove the temporary pointers in vkd3d_physical_device_info_init().
...
They were rather pointless now.
2024-07-22 16:00:28 +02:00
Giovanni Mascellani
75c64e55cd
vkd3d: Rebuild the vkd3d_physical_device_info chain before creating the device.
...
vkd3d might decide to disable some extensions after the chain is created,
so the chain must be recreated with only the structures corresponding to
enabled extensions.
2024-07-22 16:00:28 +02:00
Giovanni Mascellani
7eb63a7c0d
vkd3d: Document how to install "Graphics Tools" to use the Agility SDK.
...
This is a required step, otherwise the debug layer will not work.
2024-07-17 15:54:31 +02:00
Giovanni Mascellani
7e557420b1
tests: Terminate the Agility SDK path with a slash.
...
That's what the documentation recommends. It used to work for me without
the slash, but maybe they changed something in recent versions.
2024-07-17 15:54:31 +02:00
Giovanni Mascellani
e4e7368c1c
tests: Pad the constant buffer in test_update_compute_descriptor_tables() to 256 bytes.
...
The D3D12 debug layer signals an error otherwise.
2024-07-17 15:53:31 +02:00
Giovanni Mascellani
a876e0b192
vkd3d: Allocate temporary arrays on the stack in d3d12_command_list_update_push_descriptors().
2024-07-17 15:52:37 +02:00
Conor McCarthy
ae0faf4500
vkd3d: Limit the workgroup X count for buffer UAV clears to the supported max.
2024-07-17 15:51:39 +02:00
Conor McCarthy
3e25356abb
tests: Add a test for clearing a large buffer UAV.
...
Large buffers can exceed the maximum workgroup X count.
2024-07-17 15:51:39 +02:00
Conor McCarthy
15f8657d74
vkd3d: Create a descriptor pool for static samplers when Vulkan-backed heaps are used.
...
Static samplers may be allocated from these pools.
2024-07-17 15:50:24 +02:00
Shaun Ren
0202393d41
vkd3d-shader/d3dbc: Implement HLSL_OP1_{COS,SIN}_REDUCED for SM1.
...
Also enable SM1 trigonometry function tests.
2024-07-16 19:03:52 +02:00
Shaun Ren
ea2ffc0b6c
vkd3d-shader/hlsl: Allocate registers for HLSL_OP1_{COS,SIN}_REDUCED with the required writemasks.
2024-07-16 19:02:01 +02:00
Shaun Ren
8724cbe5d5
vkd3d-shader/d3dbc: Implement HLSL_OP3_MAD for SM1.
2024-07-16 18:56:44 +02:00
Shaun Ren
b4845b9dca
vkd3d-shader/hlsl: Implement sin/cos for SM1.
...
Also introduce HLSL_OP3_MAD.
2024-07-16 18:55:22 +02:00
Shaun Ren
b3a11a9ec4
vkd3d-shader/ir: Lower SM1 SINCOS to SM4 SINCOS.
2024-07-16 15:24:58 +02:00
Elizabeth Figura
5a53b73995
tests: Test alpha test.
2024-07-11 17:02:53 +02:00
Elizabeth Figura
7e868f1f4b
tests: Factor out a set_default_target() helper.
2024-07-11 17:02:45 +02:00
Elizabeth Figura
ded0733ff8
tests: Offset the viewport by 0.5 when running d3dbc shaders.
2024-07-11 17:02:40 +02:00