Store it in the shader_desc, and declare temps from that when compiling SPIR-V,
instead of parsing dcl_instructions.
As part of this change, we declare a single, global temps array (with Private
scope instead of Function) which is as large as the maximum of all dcl_temps
instructions. It is not clear to me whether this will improve, hurt, or have no
significant effect on the lower-level compiler. An alternative is to still
redeclare a new temps array every time (although still with a smaller size).
A struct declaration with variables is now absorbed into the 'declaration'
rule, like any other variable declaration.
A struct declaration without variables is now reduced to the
'struct_declaration_without_vars' rule.
They both are reduced to a 'declaration_statement' in the end.
In a declaration with multiple variables, the variables must be created
before the initializer of the next variable is parsed. This is required
for initializers such as:
float a = 1, b = a, c = b + 1;
A requisite for this is that the type information is parsed in the same
rule as the first variable (as a variable_def_typed) so it is
immediately available to declare the first variable. Then, the next
untyped variable declaration is parsed, and the type from the first
variable can be used to declare the second, before the third is parsed,
and so on.
Basically, declare_vars() is separated in three functions:
1. check_invalid_in_out_modifiers(), which is to be called once per
declaration and emits an error when in or out modifiers are used for
these non-parameter variables.
2. declare_var(), which now handles one variable at the time and doesn't
free any memory.
3. initialize_vars(), which takes care of preparing the initialization
instructions of several variables and frees their struct
parse_variable_def, using exclusively free_parse_variable_def().
This allows to declare variables individually before the initializer of
the next variable in the same declaration is parsed, which is used in
the following patches.
Also, simplifies memory management.
In SM1 we can expect all variables to always belong to a single regset.
structs in particular, should always be allocated to HLSL_REGSET_NUM,
since they are only allowed if all their components are numeric.
We are not covering the structs case because of the use of
hlsl_type_get_regset(), which is currently not defined for structs.
So the current shader
struct
{
float4 a;
float4 b;
} apple;
float4 main() : sv_target
{
return apple.a + apple.b;
}
fails with
vkd3d/libs/vkd3d-shader/hlsl.c:224: Aborting, reached unreachable code.
The solution is to iterate over all regsets to find the one where the
variable is allocated (if any), and ignore all others.
This only affects clip and cull distances. The HLSL compiler emits these using
dcl_input, but the previous shader (vertex or TES) will write them as a SPIRV
builtin, and hence we want to read this as a SPIRV builtin as well.
This fixes validation errors in Wine's test_clip_distance().
lower_narrowing_casts() currently creates a new cast calling
hlsl_new_cast(). This cast may be redundant, but it is not folded, which
is making SM1 emit an unnecessary fixme in some shaders:
Aborting due to not yet implemented feature: SM1 "cast" expression.
Other passes that call hlsl_new_cast() are lower_int_division() and
lower_int_modulus(), so the new fold_redundant_casts() pass is called
after these as well.
Instead of modifying the swizzle after calling sm4_src_from_node().
This fixes the case where sm4_src_from_node() returns an immediate constant.
Fixes: a471c5567a
Non-constant vector indexing is not solved with relative addressing
in the register indexes because this indexation cannot be at the level
of register-components.
Mathematical operations must be used instead.
In Shader Model 6 each signature element can span a range of register
indices, or 'rows', and system values do not share a register index with
non-system values. Inputs and outputs are referenced by element index
instead of register index. This patch merges multiple signature elements
into a single element under the following conditions:
- The register index in a load or store is specified dynamically by
including a relative address parameter with a base register index. The
dcl_index_range instruction is used to identify these.
- A register declaration is split across multiple elements which declare
different components of the register.
- A patch constant function writes tessellation factors. These are an
array in SPIR-V, but in SM 5.x each factor is declared as a separate
register, and these are dynamically indexed by the fork/join instance
id. Elimination of multiple fork/join phases converts the indices to
constants, but merging the signature elements into a single arrayed
element matches the SPIR-V output.
All references to input/output register indices are converted to element
indices. If a relative address is present, the element index is moved up
a slot so it cannot be confused with a constant offset. Existing code
only handles register index relative addressing for tessellation factors.
This patch adds generic support for it.
The new fixmes can be triggered in presence of object components within
structs (for SM5).
In shaders such as this one:
struct apple
{
Texture2D tex : TEX;
float4 color : COLOR;
};
float4 main(struct apple input) : sv_target
{
return input.tex.Load(int3(1, 2, 3));
}
Or this one:
struct
{
Texture2D tex;
float4 color;
} s;
float4 main() : sv_target
{
return s.tex.Load(int3(1, 2, 3));
}
Variables that contain more than one object (arrays or structs) require
the allocation of contiguous registers in the respective object
register spaces.
This patch makes index expressions on resources hlsl_ir_index nodes
instead of hlsl_ir_resource_load nodes, because it is not known if they
will be used later as the lhs of an hlsl_ir_resource_store.
For now, the only benefit is consistency.
Otherwise, in the added test, we get:
vkd3d-compiler: vkd3d-shader/hlsl.c:452: hlsl_init_deref_from_index_chain: Assertion `chain' failed.
because on the path that triggers the following error:
E5002: Wrong type for argument 1 of 'tex3D': expected 'sampler' or 'sampler3D', but got 'sampler2D'.
a NULL params.resource is passed to hlsl_new_resource_load() and
then to hlsl_init_deref_from_index_chain().
Since in SM1 all vector types use 4 register components, and since SM1
doesn't consider vectors of different dimx incompatible, it is necessary
to ensure that the semantic var is created with dimx=4, and to add a
cast node.
The use of the hlsl_semantic.reported_duplicated_output_next_index field
allows reporting multiple overlapping indexes, such as in the following
vertex shader:
void main(out float1x3 x : OVERLAP0, out float1x3 y : OVERLAP1)
{
x = float3(1.0, 2.0, 3.2);
y = float3(5.0, 6.0, 5.0);
}
apple.hlsl:1:41: E5013: Output semantic "OVERLAP1" is used multiple times.
apple.hlsl:1:13: First use of "OVERLAP1" is here.
apple.hlsl:1:41: E5013: Output semantic "OVERLAP2" is used multiple times.
apple.hlsl:1:13: First use of "OVERLAP2" is here.
While at the same time avoiding reporting overlaps more than once for
large arrays:
struct apple
{
float2 p : sv_position;
};
void main(out apple aps[4])
{
}
apple.hlsl:3:8: E5013: Output semantic "sv_position0" is used multiple times.
apple.hlsl:3:8: First use of "sv_position0" is here.
Fix a compile warning:
../vkd3d/libs/vkd3d-shader/hlsl_codegen.c: In function 'allocate_semantic_register':
../vkd3d/libs/vkd3d-shader/hlsl_codegen.c:2947:85: error: passing argument 4 of 'hlsl_sm4_register_from_semantic' from incompatible pointer type [-Werror=incompatible-pointer-types]
2947 | if ((builtin = hlsl_sm4_register_from_semantic(ctx, &var->semantic, output, &type, NULL, &has_idx)))
| ^~~~~
| |
| unsigned int *
In file included from ../vkd3d/libs/vkd3d-shader/hlsl_codegen.c:21:
../vkd3d/libs/vkd3d-shader/hlsl.h:1171:52: note: expected 'enum vkd3d_sm4_register_type *' but argument is of type 'unsigned int *'
1171 | bool output, enum vkd3d_sm4_register_type *type, enum vkd3d_sm4_swizzle_type *swizzle_type, bool *has_idx);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
It is illegal to match a SPIR-V multisampled resource to a Vulkan resource which
is not multisampled. Vulkan considers a resource to be multisampled if its
sample count is greater than 1 (and SPIR-V does not care about the sample count).
This fixes validation errors in the case where the sample count does actually
match the resource. In order to provide correct behaviour when there is a
mismatch, or when the sample count is missing, we will need yet another
additional interface. In the absence of that it seems best to provide a best
guess.
This fixes a validation error with the not-yet-committed merge request 135, when
the d3d11 runner is run through Wine with the Vulkan backend.
From this point on, it is no longer true that only hlsl_ir_loads can
return objects, because an object can also come from chain of
hlsl_ir_indexes that ends in an hlsl_ir_load.
The lower_index_loads pass takes care of lowering all hlsl_ir_indexes
into hlsl_ir_loads.
For this reason, hlsl_resource_load_params now expects both the resource
as the sampler to be just an hlsl_ir_node pointer instead of a pointer
to a more specific hlsl_ir_load.
This node type is intended for use during parse-time.
While we parse an indexing expression such as "a[3]", we don't know if
it will end up as part of an expression (in which case it must be folded
into a load) or it is for the lhs of a store (in which case it must be
folded into the store's deref).
The SPIR-V backend will emit a default control point phase. Inserting
inputs into the IR allows handling of declarations via the usual path
instead of an ad hoc implementation which may not match later changes
to input handling.
In SPIR-V the address must include the invocation id, but in TPF it
is implicit. Move the register index up one slot and insert an
OUTPOINTID relative address.
The practical effect this has is that we avoid potential trailing padding at
the end of DXBC blobs. Unfortunately this also means we need to be more
careful about using bytecode_get_size() to find the offset where subsequent
data would get written, although in many cases this follows a put_u32() call.
Normalise the incoming vkd3d_shader_instruction IR to the shader model 6
pattern. This allows generation of a single patch constant function in
SPIR-V.
Since the introduction of instruction arrays, the parser location no
longer matches the location of the current instruction. Ultimately we'll
likely want to add some kind of explicit location information to struct
vkd3d_shader_instruction_array, because we might do transformations that
change the order of the original instructions.
VKD3D_SM4_OP_DCL_RESOURCE currently has 1 for "dst_count", but NULL for
"dst". This is largely harmless because we never attempt to access the
destination register of VKD3DSIH_DCL instructions, but nevertheless not
quite proper.
Without this patch, dp3 and dp4 map src swizzles to the dst writemask,
which is not correct.
Before b84f560bdf, these ops worked
despite this, because the dst register had, incorrectly, the full
writemask.
To solve this problem, write_sm1_binary_op_dot() is introduced,
similarly to write_sm4_binary_op_dot().
But still throw hlsl_fixme() when there is more than one.
Prioritizing among multiple compatible function overloads in the same way
as the native compiler would require systematic testing.
Otherwise we may create nodes of different dimensions than the ones we
are replacing.
"count" is the number of components of the source deref (without
considering the swizzle), while "instr_component_count" is the actual
number of components of the instruction to be replaced.
This was originally left alone in order to allow functions without early return
to succeed, since in that case we would already emit the correct bytecode
despite not handling the HLSL_IR_JUMP_RETURN instruction.
Now that we lower return statements, however, any unhandled instructions are
either definitely going to result in invalid bytecode, or rare enough that it's
not worth returning success anyway.
SM1 dp2add doesn't map src swizzles to the dst writemask, also it
expects the last argument to have a replicate swizzle.
Before this patch we were writing the operation as:
```
dp2add r0.x, r1.x, r0.x, r2.x
```
and now it is:
```
dp2add r0.x, r1.xyxx, r0.xyxx, r2.x
```
dp2add now has its own function, write_sm1_dp2add(), since it seems to
be the only instruction with this structure.
Ideally we would be using the default swizzles for the first two src
arguments:
```
dp2add r0.x, r1, r0, r2.x
```
since, according to native's documentation, these are supported for all
sm < 4.
But this change -- along with following the convention of repeating the
last component of the swizzle when fewer than 4 components are to be
specified -- would require more global changes, probably in
hlsl_swizzle_from_writemask() and hlsl_map_swizzle().
Because of the change introduced in
f21693b2 vkd3d-shader/hlsl: Use reg_size as component count when allocating a single register.
SM1 scalars and vectors were not longer getting the correct writemask
when they are allocated.
This happened because they have to reserve the whole register even if
they only use some of its components, so their reg_size may differ from
the number of components.
This commit fixes that.
Prevent them from being ever looked up.
Our naming scheme for synthetic variables already effectively prevents this, but
this is better for clarity. We also will need to be able to move some named
variables into a dummy scope to account for complexities around function
definition and declarations.
Co-authored-by: Francisco Casas <fcasas@codeweavers.com>
Co-authored-by: Zebediah Figura <zfigura@codeweavers.com>
Because copy_propagation_transform_object_load() replaces a deref
instead of an instruction, it is currently prone to two problems:
1- It can replace a deref with the same deref, returning true every
time and getting the compilation stuck in an endless loop of
copy-propagation iterations.
2- When performed multiple times in the same deref, the second time it
can replace the deref with a deref from a temp that is only valid in
another point of the program execution, resulting in an incorrect value.
This patch preempts this by avoiding replacing derefs when the new deref
doesn't point to a uniform variable. Because, uniform variables cannot
be written to.
Reinterpret min16float, min10float, min16int, min12int, and min16uint
as their regular counterparts: float, float, int, int, uint,
respectively.
A proper implementation would require adding minimum precision
indicators to all the dxbc-tpf instructions that use these types.
Consider the output of fxc 10.1 with the following shader:
uniform int i;
float4 main() : sv_target
{
min16float4 a = {0, 1, 2, i};
min16int2 b = {4, i};
min10float3 c = {6.4, 7, i};
min12int d = 9.4;
min16uint4x2 e = {14.4, 15, 16, 17, 18, 19, 20, i};
return mul(e, b) + a + c.xyzx + d;
}
However, if the graphics driver doesn't have minimum precision support,
it ignores the minimum precision indicators and runs at 32-bit
precision, which is equivalent as working with regular types.
If the offset of a gather resource load can be represented as an
aoffimmi (vectori of ints from -8 to 7), use one.
This is of particular importance for 4.0 profiles, where this is the only
valid way of representing offsets for this operation.
If a hlsl_ir_load loads a variable whose components are stored from different
instructions, copy propagation doesn't replace it.
But if all these instructions are constants (which currently is the case
for value constructors), the load could be replaced with a constant value.
Which is expected in some other instructions, e.g. texel_offsets when
using aoffimmi modifiers.
For instance, this shader:
```
sampler s;
Texture2D t;
float4 main() : sv_target
{
return t.Gather(s, float2(0.6, 0.6), int2(0, 0));
}
```
results in the following IR before applying the patch:
```
float | 6.00000024e-01
float | 6.00000024e-01
uint | 0
| = (<constructor-2>[@4].x @2)
uint | 1
| = (<constructor-2>[@6].x @3)
float2 | <constructor-2>
int | 0
int | 0
uint | 0
| = (<constructor-5>[@11].x @9)
uint | 1
| = (<constructor-5>[@13].x @10)
int2 | <constructor-5>
float4 | gather_red(resource = t, sampler = s, coords = @8, offset = @15)
| return
| = (<output-sv_target0> @16)
```
and this IR afterwards:
```
float2 | {6.00000024e-01 6.00000024e-01 }
int2 | {0 0 }
float4 | gather_red(resource = t, sampler = s, coords = @2, offset = @3)
| return
| = (<output-sv_target0> @4)
```
Rename it to copy_propagation_replace_with_single_instr() accordingly.
The idea is to introduce a constant vector replacement pass which will do the
same thing.
copy_propagation_compute_replacement() is not doing very much for us, and
conceptually is a bit of an odd fit anyway, since it's meant to deal with
multi-component types.
validate_static_object_references() validates that uninitialized static
objects are not referenced in the shader.
In case a static variable contains both numeric and object types, the
"Static variables cannot have both numeric and resource components."
error should preempt uninitialized numeric values to reach further
compilation steps.
Note that in the future we should call
validate_static_object_references() after DCE and pruning branches,
because shaders such as these compile (at least in more modern versions
of the native compiler):
Branch pruning:
```
static RWTexture2D<float> tex;
float4 main() : sv_target
{
if (0)
{
tex[int2(0, 0)] = 2;
}
return 0;
}
```
DCE:
```
static Texture2D tex;
uniform uint i;
float4 main() : sv_target
{
float4 unused = tex.Load(int3(0, 1, 2));
return 0;
}
```
These are "todo" tests in hlsl-static-initializer.shader_test
that depend on this.
We are currently not initializing static values to zero by default.
Consider the following shader:
```hlsl
static float4 va;
float4 main() : sv_target
{
return va;
}
```
we get the following output:
```
ps_5_0
dcl_output o0.xyzw
dcl_temps 2
mov r0.xyzw, r1.xyzw
mov o0.xyzw, r0.xyzw
ret
```
where r1.xyzw is not initialized.
This patch solves this by assigning the static variable the value of an
uint 0, and thus, relying on complex broadcasts.
This seems to be the behaviour of the 9.29.952.3111 version of the native
compiler, since it retrieves the following error on a shader that lacks
an initializer on a data type with object components:
```
error X3017: cannot convert from 'uint' to 'struct <unnamed>'
```
We have a different system of generating intrinsics, which makes it easier to
deal with "polymorphic" arithmetic functions.
Defining and storing intrinsics as hlsl_ir_function_decls would also require
more space in memory (and more optimization passes to get rid of the parameter
variables), and doesn't really save us any effort in terms of source code.
Using add_unary_arithmetic_expr() instead of hlsl_new_unary_expr()
allows the intrinsic to work with matrices.
Otherwise we get:
E5017: Aborting due to not yet implemented feature: Copying from unsupported node type.
because an HLSL_IR_EXPR reaches split_matrix_copies().
Atomic ops on images with Unknown type will cause SPIR-V validation failure,
and assertion failure in Mesa debug builds. D3D12 allows atomics on typed
buffers, and this requires a distinction to be made between UAV reads and
atomic ops.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=53874
Unlike compatible_data_types() and implicit_compatible_data_types(),
this function is intended to be symmetrical. So it makes sense to
preserve the names "t1" and "t2" for the arguments.
Otherwise, for instance, the added test results in:
debug_hlsl_writemask: Assertion `!(writemask & ~VKD3DSP_WRITEMASK_ALL)' failed.
Which happens in allocate_variable_temp_register() when the variable's
type reg_size is <= 4 but its component count is larger, which may
happen if it contains objects.
We would like to generate SPIR-V for input formats other than DXBC.
The "vkd3d_" prefix is dropped, partly to make names shorter, and partly to help
clarify what is an internal function.
I prefer avoiding the vkd3d_* prefix on all internal functions, for these
reasons. However, I'm open to restoring it.
The function has far too many arguments, including multiple different arguments
with the same type. Use a structure for clarity and to avoid errors.
Merge hlsl_new_sample_lod() into hlsl_new_resource_load() accordingly.
This should silence warnings about some branches non returning any value
without requiring additional "return 0" statement or similar.
Also, in theory this might enable to compiler to optimize the program
a little bit more, though that's unlikely to have any measurable effect.
Also, TextureCube and TextureCubeArray don't support the offset
argument, so this check is updated here too.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Also, TextureCube and TextureCubeArray don't support the offset
argument, so this check is updated.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
HLSL_ARRAY_ELEMENTS_COUNT_IMPLICIT (zero) is used as a temporal value
for elements_count for implicit size arrays.
This value is replaced by the correct one after parsing the initializer.
In case the implicit array is not initialized correctly, hlsl_error()
is called but the array size is kept at 0. So the rest of the code
must handle these cases.
In shader model 5.1, unlike in 5.0, declaring a multi-dimensional
object-type array with the last dimension implicit results in
an error. This happens even in presence of an initializer.
So, both gen_struct_fields() and declare_vars() first check if the
shader model is 5.1, the array elements are objects, and if there is
at least one implicit array size to handle the whole type as an
unbounded resource array.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
It is responsibility of the shader's programmer to ensure that
object references can be solved statically.
Resource arrays for ps_5_1 and vs_5_1 are an exception which is not
properly handled yet. They probably deserve a different object type.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Otherwise we get false in implicit_compatible_data_types() when passing
types that are equal but not convertible according to
convertible_data_type(); e.g. getting:
"Can't implicitly convert from Texture2D<float4> to Texture2D<float4>."
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Don't assume that enums and uint32_t parameters are identical. Clang
16 changes the diagonstic for incompatible function pointer types
from a warning into an error by default.
This fixes the following error, when built (for aarch64, but probably
also for other architectures) in MSVC mode:
../src/libs/vkd3d/libs/vkd3d-shader/spirv.c:1083:13: error: incompatible function pointer types passing 'uint32_t (struct vkd3d_spirv_builder *, uint32_t, SpvDim, uint32_t, uint32_t, uint32_t, uint32_t, SpvImageFormat)' (aka 'unsigned int (struct vkd3d_spirv_builder *, unsigned int, enum SpvDim_, unsigned int, unsigned int, unsigned int, unsigned int, enum SpvImageFormat_)') to parameter of type 'vkd3d_spirv_build7_pfn' (aka 'unsigned int (*)(struct vkd3d_spirv_builder *, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int)') [-Wincompatible-function-pointer-types]
vkd3d_spirv_build_op_type_image);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/libs/vkd3d/libs/vkd3d-shader/spirv.c:612:68: note: passing argument to parameter 'build_pfn' here
SpvOp op, const uint32_t *operands, vkd3d_spirv_build7_pfn build_pfn)
^
Signed-off-by: Martin Storsjö <martin@martin.st>
hlsl_new_store() and hlsl_new_load() are deleted, so now there are no more
direct ways to create derefs with offsets in hlsl.c and hlsl.h.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Zebediah Figura <zfigura@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
This can be done now, to ensure that register offsets are no longer used
in hlsl.c and hlsl.h.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
At this point, the parse code is free of offsets; it only uses index
paths.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
The transform_deref_paths_into_offsets pass turns these index paths back
into register offsets.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
At this point add_load() is split into add_load_component() and
add_load_index(); register offsets are hidden for these functions.
Signed-off-by: Francisco Casas <fcasas@codeweavers.com>
Signed-off-by: Giovanni Mascellani <gmascellani@codeweavers.com>
Specifying R32 for UAVs created with a vector format, e.g. R32G32B32A32_FLOAT,
results in only the red being loaded/stored, potentially causing images to
contain only the red component.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
