gecko/security/nss/lib/softoken/sftkmod.c

696 lines
19 KiB
C
Raw Normal View History

2008-06-06 05:40:11 -07:00
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2007
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* The following code handles the storage of PKCS 11 modules used by the
* NSS. For the rest of NSS, only one kind of database handle exists:
*
* SFTKDBHandle
*
* There is one SFTKDBHandle for the each key database and one for each cert
* database. These databases are opened as associated pairs, one pair per
* slot. SFTKDBHandles are reference counted objects.
*
* Each SFTKDBHandle points to a low level database handle (SDB). This handle
* represents the underlying physical database. These objects are not
* reference counted, an are 'owned' by their respective SFTKDBHandles.
*
*
*/
#include "sftkdb.h"
#include "sftkpars.h"
#include "prprf.h"
#include "prsystem.h"
#include "lgglue.h"
#include "secmodt.h"
/****************************************************************
*
* Secmod database.
*
* The new secmod database is simply a text file with each of the module
* entries. in the following form:
*
* #
* # This is a comment The next line is the library to load
* library=libmypkcs11.so
* name="My PKCS#11 module"
* params="my library's param string"
* nss="NSS parameters"
* other="parameters for other libraries and applications"
*
* library=libmynextpk11.so
* name="My other PKCS#11 module"
*/
static char *
sftkdb_quote(const char *string, char quote)
{
char *newString = 0;
int escapes = 0, size = 0;
const char *src;
char *dest;
size=2;
for (src=string; *src ; src++) {
if ((*src == quote) || (*src == '\\')) escapes++;
size++;
}
dest = newString = PORT_ZAlloc(escapes+size+1);
if (newString == NULL) {
return NULL;
}
*dest++=quote;
for (src=string; *src; src++,dest++) {
if ((*src == '\\') || (*src == quote)) {
*dest++ = '\\';
}
*dest = *src;
}
*dest=quote;
return newString;
}
/*
* Smart string cat functions. Automatically manage the memory.
* The first parameter is the source string. If it's null, we
* allocate memory for it. If it's not, we reallocate memory
* so the the concanenated string fits.
*/
static char *
sftkdb_DupnCat(char *baseString, const char *str, int str_len)
{
int len = (baseString ? PORT_Strlen(baseString) : 0) + 1;
char *newString;
len += str_len;
newString = (char *) PORT_Realloc(baseString,len);
if (newString == NULL) {
PORT_Free(baseString);
return NULL;
}
if (baseString == NULL) *newString = 0;
return PORT_Strncat(newString,str, str_len);
}
/* Same as sftkdb_DupnCat except it concatenates the full string, not a
* partial one */
static char *
sftkdb_DupCat(char *baseString, const char *str)
{
return sftkdb_DupnCat(baseString, str, PORT_Strlen(str));
}
/* function to free up all the memory associated with a null terminated
* array of module specs */
static SECStatus
sftkdb_releaseSpecList(char **moduleSpecList)
{
if (moduleSpecList) {
char **index;
for(index = moduleSpecList; *index; index++) {
PORT_Free(*index);
}
PORT_Free(moduleSpecList);
}
return SECSuccess;
}
#define SECMOD_STEP 10
static SECStatus
sftkdb_growList(char ***pModuleList, int *useCount, int last)
{
char **newModuleList;
*useCount += SECMOD_STEP;
newModuleList = (char **)PORT_Realloc(*pModuleList,
*useCount*sizeof(char *));
if (newModuleList == NULL) {
return SECFailure;
}
PORT_Memset(&newModuleList[last],0, sizeof(char *)*SECMOD_STEP);
*pModuleList = newModuleList;
return SECSuccess;
}
static
char *sftk_getOldSecmodName(const char *dbname,const char *filename)
{
char *file = NULL;
char *dirPath = PORT_Strdup(dbname);
char *sep;
sep = PORT_Strrchr(dirPath,*PATH_SEPARATOR);
#ifdef WINDOWS
if (!sep) {
sep = PORT_Strrchr(dirPath,'/');
}
#endif
if (sep) {
*(sep)=0;
}
file= PR_smprintf("%s"PATH_SEPARATOR"%s", dirPath, filename);
PORT_Free(dirPath);
return file;
}
#define MAX_LINE_LENGTH 2048
#define SFTK_DEFAULT_INTERNAL_INIT1 "library= name=\"NSS Internal PKCS #11 Module\" parameters="
#define SFTK_DEFAULT_INTERNAL_INIT2 " NSS=\"Flags=internal,critical trustOrder=75 cipherOrder=100 slotParams=(1={"
#define SFTK_DEFAULT_INTERNAL_INIT3 " askpw=any timeout=30})\""
#ifdef XP_UNIX
#include <unistd.h>
#endif
/*
* Read all the existing modules in out of the file.
*/
char **
sftkdb_ReadSecmodDB(SDBType dbType, const char *appName,
const char *filename, const char *dbname,
char *params, PRBool rw)
{
FILE *fd = NULL;
char **moduleList = NULL;
int moduleCount = 1;
int useCount = SECMOD_STEP;
char line[MAX_LINE_LENGTH];
PRBool internal = PR_FALSE;
PRBool skipParams = PR_FALSE;
char *moduleString = NULL;
char *paramsValue=NULL;
PRBool failed = PR_TRUE;
if ((dbType == SDB_LEGACY) || (dbType == SDB_MULTIACCESS)) {
return sftkdbCall_ReadSecmodDB(appName, filename, dbname, params, rw);
}
moduleList = (char **) PORT_ZAlloc(useCount*sizeof(char **));
if (moduleList == NULL) return NULL;
/* do we really want to use streams here */
fd = fopen(dbname, "r");
if (fd == NULL) goto done;
/*
* the following loop takes line separated config lines and colapses
* the lines to a single string, escaping and quoting as necessary.
*/
/* loop state variables */
moduleString = NULL; /* current concatenated string */
internal = PR_FALSE; /* is this an internal module */
skipParams = PR_FALSE; /* did we find an override parameter block*/
paramsValue = NULL; /* the current parameter block value */
while (fgets(line, sizeof(line), fd) != NULL) {
int len = PORT_Strlen(line);
/* remove the ending newline */
if (len && line[len-1] == '\n') {
len--;
line[len] = 0;
}
if (*line == '#') {
continue;
}
if (*line != 0) {
/*
* The PKCS #11 group standard assumes blocks of strings
* separated by new lines, clumped by new lines. Internally
* we take strings separated by spaces, so we may need to escape
* certain spaces.
*/
char *value = PORT_Strchr(line,'=');
/* there is no value, write out the stanza as is */
if (value == NULL || value[1] == 0) {
if (moduleString) {
moduleString = sftkdb_DupnCat(moduleString," ", 1);
if (moduleString == NULL) goto loser;
}
moduleString = sftkdb_DupCat(moduleString, line);
if (moduleString == NULL) goto loser;
/* value is already quoted, just write it out */
} else if (value[1] == '"') {
if (moduleString) {
moduleString = sftkdb_DupnCat(moduleString," ", 1);
if (moduleString == NULL) goto loser;
}
moduleString = sftkdb_DupCat(moduleString, line);
if (moduleString == NULL) goto loser;
/* we have an override parameter section, remember that
* we found this (see following comment about why this
* is necessary). */
if (PORT_Strncasecmp(line, "parameters", 10) == 0) {
skipParams = PR_TRUE;
}
/*
* The internal token always overrides it's parameter block
* from the passed in parameters, so wait until then end
* before we include the parameter block in case we need to
* override it. NOTE: if the parameter block is quoted with ("),
* this override does not happen. This allows you to override
* the application's parameter configuration.
*
* parameter block state is controlled by the following variables:
* skipParams - Bool : set to true of we have an override param
* block (all other blocks, either implicit or explicit are
* ignored).
* paramsValue - char * : pointer to the current param block. In
* the absence of overrides, paramsValue is set to the first
* parameter block we find. All subsequent blocks are ignored.
* When we find an internal token, the application passed
* parameters take precident.
*/
} else if (PORT_Strncasecmp(line, "parameters", 10) == 0) {
/* already have parameters */
if (paramsValue) {
continue;
}
paramsValue = sftkdb_quote(&value[1], '"');
if (paramsValue == NULL) goto loser;
continue;
} else {
/* may need to quote */
char *newLine;
if (moduleString) {
moduleString = sftkdb_DupnCat(moduleString," ", 1);
if (moduleString == NULL) goto loser;
}
moduleString = sftkdb_DupnCat(moduleString,line,value-line+1);
if (moduleString == NULL) goto loser;
newLine = sftkdb_quote(&value[1],'"');
if (newLine == NULL) goto loser;
moduleString = sftkdb_DupCat(moduleString,newLine);
PORT_Free(newLine);
if (moduleString == NULL) goto loser;
}
/* check to see if it's internal? */
if (PORT_Strncasecmp(line, "NSS=", 4) == 0) {
/* This should be case insensitive! reviewers make
* me fix it if it's not */
if (PORT_Strstr(line,"internal")) {
internal = PR_TRUE;
/* override the parameters */
if (paramsValue) {
PORT_Free(paramsValue);
}
paramsValue = sftkdb_quote(params, '"');
}
}
continue;
}
if ((moduleString == NULL) || (*moduleString == 0)) {
continue;
}
/*
* if we are here, we have found a complete stanza. Now write out
* any param section we may have found.
*/
if (paramsValue) {
/* we had an override */
if (!skipParams) {
moduleString = sftkdb_DupnCat(moduleString," parameters=", 12);
if (moduleString == NULL) goto loser;
moduleString = sftkdb_DupCat(moduleString, paramsValue);
if (moduleString == NULL) goto loser;
}
PORT_Free(paramsValue);
paramsValue = NULL;
}
if ((moduleCount+1) >= useCount) {
SECStatus rv;
rv = sftkdb_growList(&moduleList, &useCount, moduleCount+1);
if (rv != SECSuccess) {
goto loser;
}
}
if (internal) {
moduleList[0] = moduleString;
} else {
moduleList[moduleCount] = moduleString;
moduleCount++;
}
moduleString = NULL;
internal = PR_FALSE;
skipParams = PR_FALSE;
}
if (moduleString) {
PORT_Free(moduleString);
moduleString = NULL;
}
done:
/* if we couldn't open a pkcs11 database, look for the old one */
if (fd == NULL) {
char *olddbname = sftk_getOldSecmodName(dbname,filename);
PRStatus status;
char **oldModuleList;
int i;
/* couldn't get the old name */
if (!olddbname) {
goto bail;
}
/* old one doesn't exist */
status = PR_Access(olddbname, PR_ACCESS_EXISTS);
if (status != PR_SUCCESS) {
goto bail;
}
oldModuleList = sftkdbCall_ReadSecmodDB(appName, filename,
olddbname, params, rw);
/* old one had no modules */
if (!oldModuleList) {
goto bail;
}
/* count the modules */
for (i=0; oldModuleList[i]; i++) { }
/* grow the moduleList if necessary */
if (i >= useCount) {
SECStatus rv;
rv = sftkdb_growList(&moduleList,&useCount,moduleCount+1);
if (rv != SECSuccess) {
goto loser;
}
}
/* write each module out, and copy it */
for (i=0; oldModuleList[i]; i++) {
if (rw) {
sftkdb_AddSecmodDB(dbType,appName,filename,dbname,
oldModuleList[i],rw);
}
if (moduleList[i]) {
PORT_Free(moduleList[i]);
}
moduleList[i] = PORT_Strdup(oldModuleList[i]);
}
/* done with the old module list */
sftkdbCall_ReleaseSecmodDBData(appName, filename, olddbname,
oldModuleList, rw);
bail:
if (olddbname) {
PR_smprintf_free(olddbname);
}
}
if (!moduleList[0]) {
char * newParams;
moduleString = PORT_Strdup(SFTK_DEFAULT_INTERNAL_INIT1);
newParams = sftkdb_quote(params,'"');
if (newParams == NULL) goto loser;
moduleString = sftkdb_DupCat(moduleString, newParams);
PORT_Free(newParams);
if (moduleString == NULL) goto loser;
moduleString = sftkdb_DupCat(moduleString, SFTK_DEFAULT_INTERNAL_INIT2);
if (moduleString == NULL) goto loser;
moduleString = sftkdb_DupCat(moduleString, SECMOD_SLOT_FLAGS);
if (moduleString == NULL) goto loser;
moduleString = sftkdb_DupCat(moduleString, SFTK_DEFAULT_INTERNAL_INIT3);
if (moduleString == NULL) goto loser;
moduleList[0] = moduleString;
moduleString = NULL;
}
failed = PR_FALSE;
loser:
/*
* cleanup
*/
/* deal with trust cert db here */
if (moduleString) {
PORT_Free(moduleString);
moduleString = NULL;
}
if (paramsValue) {
PORT_Free(paramsValue);
paramsValue = NULL;
}
if (failed || (moduleList[0] == NULL)) {
/* This is wrong! FIXME */
sftkdb_releaseSpecList(moduleList);
moduleList = NULL;
failed = PR_TRUE;
}
if (fd != NULL) {
fclose(fd);
} else if (!failed && rw) {
/* update our internal module */
sftkdb_AddSecmodDB(dbType,appName,filename,dbname,moduleList[0],rw);
}
return moduleList;
}
SECStatus
sftkdb_ReleaseSecmodDBData(SDBType dbType, const char *appName,
const char *filename, const char *dbname,
char **moduleSpecList, PRBool rw)
{
if ((dbType == SDB_LEGACY) || (dbType == SDB_MULTIACCESS)) {
return sftkdbCall_ReleaseSecmodDBData(appName, filename, dbname,
moduleSpecList, rw);
}
if (moduleSpecList) {
sftkdb_releaseSpecList(moduleSpecList);
}
return SECSuccess;
}
/*
* Delete a module from the Data Base
*/
SECStatus
sftkdb_DeleteSecmodDB(SDBType dbType, const char *appName,
const char *filename, const char *dbname,
char *args, PRBool rw)
{
/* SHDB_FIXME implement */
FILE *fd = NULL;
FILE *fd2 = NULL;
char line[MAX_LINE_LENGTH];
char *dbname2 = NULL;
char *block = NULL;
char *name = NULL;
char *lib = NULL;
int name_len, lib_len;
PRBool skip = PR_FALSE;
PRBool found = PR_FALSE;
if ((dbType == SDB_LEGACY) || (dbType == SDB_MULTIACCESS)) {
return sftkdbCall_DeleteSecmodDB(appName, filename, dbname, args, rw);
}
if (!rw) {
return SECFailure;
}
dbname2 = strdup(dbname);
if (dbname2 == NULL) goto loser;
dbname2[strlen(dbname)-1]++;
/* do we really want to use streams here */
fd = fopen(dbname, "r");
if (fd == NULL) goto loser;
fd2 = fopen(dbname2, "w+");
if (fd2 == NULL) goto loser;
name = sftk_argGetParamValue("name",args);
if (name) {
name_len = PORT_Strlen(name);
}
lib = sftk_argGetParamValue("library",args);
if (lib) {
lib_len = PORT_Strlen(lib);
}
/*
* the following loop takes line separated config files and colapses
* the lines to a single string, escaping and quoting as necessary.
*/
/* loop state variables */
block = NULL;
skip = PR_FALSE;
while (fgets(line, sizeof(line), fd) != NULL) {
/* If we are processing a block (we haven't hit a blank line yet */
if (*line != '\n') {
/* skip means we are in the middle of a block we are deleting */
if (skip) {
continue;
}
/* if we haven't found the block yet, check to see if this block
* matches our requirements */
if (!found && ((name && (PORT_Strncasecmp(line,"name=",5) == 0) &&
(PORT_Strncmp(line+5,name,name_len) == 0)) ||
(lib && (PORT_Strncasecmp(line,"library=",8) == 0) &&
(PORT_Strncmp(line+8,lib,lib_len) == 0)))) {
/* yup, we don't need to save any more data, */
PORT_Free(block);
block=NULL;
/* we don't need to collect more of this block */
skip = PR_TRUE;
/* we don't need to continue searching for the block */
found =PR_TRUE;
continue;
}
/* not our match, continue to collect data in this block */
block = sftkdb_DupCat(block,line);
continue;
}
/* we've collected a block of data that wasn't the module we were
* looking for, write it out */
if (block) {
fwrite(block, PORT_Strlen(block), 1, fd2);
PORT_Free(block);
block = NULL;
}
/* If we didn't just delete the this block, keep the blank line */
if (!skip) {
fputs(line,fd2);
}
/* we are definately not in a deleted block anymore */
skip = PR_FALSE;
}
fclose(fd);
fclose(fd2);
/* rename dbname2 to dbname */
if (found) {
PR_Delete(dbname);
PR_Rename(dbname2,dbname);
}
PORT_Free(dbname2);
return SECSuccess;
loser:
if (fd != NULL) {
fclose(fd);
}
if (fd2 != NULL) {
fclose(fd2);
}
if (dbname2) {
PR_Delete(dbname2);
PORT_Free(dbname2);
}
return SECFailure;
}
/*
* Add a module to the Data base
*/
SECStatus
sftkdb_AddSecmodDB(SDBType dbType, const char *appName,
const char *filename, const char *dbname,
char *module, PRBool rw)
{
FILE *fd = NULL;
char *block = NULL;
PRBool libFound = PR_FALSE;
if ((dbType == SDB_LEGACY) || (dbType == SDB_MULTIACCESS)) {
return sftkdbCall_AddSecmodDB(appName, filename, dbname, module, rw);
}
/* can't write to a read only module */
if (!rw) {
return SECFailure;
}
/* remove the previous version if it exists */
(void) sftkdb_DeleteSecmodDB(dbType, appName, filename, dbname, module, rw);
/* do we really want to use streams here */
fd = fopen(dbname, "a+");
if (fd == NULL) {
return SECFailure;
}
module = sftk_argStrip(module);
while (*module) {
int count;
char *keyEnd = PORT_Strchr(module,'=');
char *value;
if (PORT_Strncmp(module, "library=", 8) == 0) {
libFound=PR_TRUE;
}
if (keyEnd == NULL) {
block = sftkdb_DupCat(block, module);
break;
}
value = sftk_argFetchValue(&keyEnd[1], &count);
block = sftkdb_DupnCat(block, module, keyEnd-module+1);
if (block == NULL) { goto loser; }
if (value) {
block = sftkdb_DupCat(block, sftk_argStrip(value));
PORT_Free(value);
}
if (block == NULL) { goto loser; }
block = sftkdb_DupnCat(block, "\n", 1);
module = keyEnd + 1 + count;
module = sftk_argStrip(module);
}
if (block) {
if (!libFound) {
fprintf(fd,"library=\n");
}
fwrite(block, PORT_Strlen(block), 1, fd);
fprintf(fd,"\n");
PORT_Free(block);
block = NULL;
}
fclose(fd);
return SECSuccess;
loser:
PORT_Free(block);
fclose(fd);
return SECFailure;
}