/* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is the Netscape security libraries. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1994-2007 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ /* * The following code handles the storage of PKCS 11 modules used by the * NSS. For the rest of NSS, only one kind of database handle exists: * * SFTKDBHandle * * There is one SFTKDBHandle for the each key database and one for each cert * database. These databases are opened as associated pairs, one pair per * slot. SFTKDBHandles are reference counted objects. * * Each SFTKDBHandle points to a low level database handle (SDB). This handle * represents the underlying physical database. These objects are not * reference counted, an are 'owned' by their respective SFTKDBHandles. * * */ #include "sftkdb.h" #include "sftkpars.h" #include "prprf.h" #include "prsystem.h" #include "lgglue.h" #include "secmodt.h" /**************************************************************** * * Secmod database. * * The new secmod database is simply a text file with each of the module * entries. in the following form: * * # * # This is a comment The next line is the library to load * library=libmypkcs11.so * name="My PKCS#11 module" * params="my library's param string" * nss="NSS parameters" * other="parameters for other libraries and applications" * * library=libmynextpk11.so * name="My other PKCS#11 module" */ static char * sftkdb_quote(const char *string, char quote) { char *newString = 0; int escapes = 0, size = 0; const char *src; char *dest; size=2; for (src=string; *src ; src++) { if ((*src == quote) || (*src == '\\')) escapes++; size++; } dest = newString = PORT_ZAlloc(escapes+size+1); if (newString == NULL) { return NULL; } *dest++=quote; for (src=string; *src; src++,dest++) { if ((*src == '\\') || (*src == quote)) { *dest++ = '\\'; } *dest = *src; } *dest=quote; return newString; } /* * Smart string cat functions. Automatically manage the memory. * The first parameter is the source string. If it's null, we * allocate memory for it. If it's not, we reallocate memory * so the the concanenated string fits. */ static char * sftkdb_DupnCat(char *baseString, const char *str, int str_len) { int len = (baseString ? PORT_Strlen(baseString) : 0) + 1; char *newString; len += str_len; newString = (char *) PORT_Realloc(baseString,len); if (newString == NULL) { PORT_Free(baseString); return NULL; } if (baseString == NULL) *newString = 0; return PORT_Strncat(newString,str, str_len); } /* Same as sftkdb_DupnCat except it concatenates the full string, not a * partial one */ static char * sftkdb_DupCat(char *baseString, const char *str) { return sftkdb_DupnCat(baseString, str, PORT_Strlen(str)); } /* function to free up all the memory associated with a null terminated * array of module specs */ static SECStatus sftkdb_releaseSpecList(char **moduleSpecList) { if (moduleSpecList) { char **index; for(index = moduleSpecList; *index; index++) { PORT_Free(*index); } PORT_Free(moduleSpecList); } return SECSuccess; } #define SECMOD_STEP 10 static SECStatus sftkdb_growList(char ***pModuleList, int *useCount, int last) { char **newModuleList; *useCount += SECMOD_STEP; newModuleList = (char **)PORT_Realloc(*pModuleList, *useCount*sizeof(char *)); if (newModuleList == NULL) { return SECFailure; } PORT_Memset(&newModuleList[last],0, sizeof(char *)*SECMOD_STEP); *pModuleList = newModuleList; return SECSuccess; } static char *sftk_getOldSecmodName(const char *dbname,const char *filename) { char *file = NULL; char *dirPath = PORT_Strdup(dbname); char *sep; sep = PORT_Strrchr(dirPath,*PATH_SEPARATOR); #ifdef WINDOWS if (!sep) { sep = PORT_Strrchr(dirPath,'/'); } #endif if (sep) { *(sep)=0; } file= PR_smprintf("%s"PATH_SEPARATOR"%s", dirPath, filename); PORT_Free(dirPath); return file; } #define MAX_LINE_LENGTH 2048 #define SFTK_DEFAULT_INTERNAL_INIT1 "library= name=\"NSS Internal PKCS #11 Module\" parameters=" #define SFTK_DEFAULT_INTERNAL_INIT2 " NSS=\"Flags=internal,critical trustOrder=75 cipherOrder=100 slotParams=(1={" #define SFTK_DEFAULT_INTERNAL_INIT3 " askpw=any timeout=30})\"" #ifdef XP_UNIX #include #endif /* * Read all the existing modules in out of the file. */ char ** sftkdb_ReadSecmodDB(SDBType dbType, const char *appName, const char *filename, const char *dbname, char *params, PRBool rw) { FILE *fd = NULL; char **moduleList = NULL; int moduleCount = 1; int useCount = SECMOD_STEP; char line[MAX_LINE_LENGTH]; PRBool internal = PR_FALSE; PRBool skipParams = PR_FALSE; char *moduleString = NULL; char *paramsValue=NULL; PRBool failed = PR_TRUE; if ((dbType == SDB_LEGACY) || (dbType == SDB_MULTIACCESS)) { return sftkdbCall_ReadSecmodDB(appName, filename, dbname, params, rw); } moduleList = (char **) PORT_ZAlloc(useCount*sizeof(char **)); if (moduleList == NULL) return NULL; /* do we really want to use streams here */ fd = fopen(dbname, "r"); if (fd == NULL) goto done; /* * the following loop takes line separated config lines and colapses * the lines to a single string, escaping and quoting as necessary. */ /* loop state variables */ moduleString = NULL; /* current concatenated string */ internal = PR_FALSE; /* is this an internal module */ skipParams = PR_FALSE; /* did we find an override parameter block*/ paramsValue = NULL; /* the current parameter block value */ while (fgets(line, sizeof(line), fd) != NULL) { int len = PORT_Strlen(line); /* remove the ending newline */ if (len && line[len-1] == '\n') { len--; line[len] = 0; } if (*line == '#') { continue; } if (*line != 0) { /* * The PKCS #11 group standard assumes blocks of strings * separated by new lines, clumped by new lines. Internally * we take strings separated by spaces, so we may need to escape * certain spaces. */ char *value = PORT_Strchr(line,'='); /* there is no value, write out the stanza as is */ if (value == NULL || value[1] == 0) { if (moduleString) { moduleString = sftkdb_DupnCat(moduleString," ", 1); if (moduleString == NULL) goto loser; } moduleString = sftkdb_DupCat(moduleString, line); if (moduleString == NULL) goto loser; /* value is already quoted, just write it out */ } else if (value[1] == '"') { if (moduleString) { moduleString = sftkdb_DupnCat(moduleString," ", 1); if (moduleString == NULL) goto loser; } moduleString = sftkdb_DupCat(moduleString, line); if (moduleString == NULL) goto loser; /* we have an override parameter section, remember that * we found this (see following comment about why this * is necessary). */ if (PORT_Strncasecmp(line, "parameters", 10) == 0) { skipParams = PR_TRUE; } /* * The internal token always overrides it's parameter block * from the passed in parameters, so wait until then end * before we include the parameter block in case we need to * override it. NOTE: if the parameter block is quoted with ("), * this override does not happen. This allows you to override * the application's parameter configuration. * * parameter block state is controlled by the following variables: * skipParams - Bool : set to true of we have an override param * block (all other blocks, either implicit or explicit are * ignored). * paramsValue - char * : pointer to the current param block. In * the absence of overrides, paramsValue is set to the first * parameter block we find. All subsequent blocks are ignored. * When we find an internal token, the application passed * parameters take precident. */ } else if (PORT_Strncasecmp(line, "parameters", 10) == 0) { /* already have parameters */ if (paramsValue) { continue; } paramsValue = sftkdb_quote(&value[1], '"'); if (paramsValue == NULL) goto loser; continue; } else { /* may need to quote */ char *newLine; if (moduleString) { moduleString = sftkdb_DupnCat(moduleString," ", 1); if (moduleString == NULL) goto loser; } moduleString = sftkdb_DupnCat(moduleString,line,value-line+1); if (moduleString == NULL) goto loser; newLine = sftkdb_quote(&value[1],'"'); if (newLine == NULL) goto loser; moduleString = sftkdb_DupCat(moduleString,newLine); PORT_Free(newLine); if (moduleString == NULL) goto loser; } /* check to see if it's internal? */ if (PORT_Strncasecmp(line, "NSS=", 4) == 0) { /* This should be case insensitive! reviewers make * me fix it if it's not */ if (PORT_Strstr(line,"internal")) { internal = PR_TRUE; /* override the parameters */ if (paramsValue) { PORT_Free(paramsValue); } paramsValue = sftkdb_quote(params, '"'); } } continue; } if ((moduleString == NULL) || (*moduleString == 0)) { continue; } /* * if we are here, we have found a complete stanza. Now write out * any param section we may have found. */ if (paramsValue) { /* we had an override */ if (!skipParams) { moduleString = sftkdb_DupnCat(moduleString," parameters=", 12); if (moduleString == NULL) goto loser; moduleString = sftkdb_DupCat(moduleString, paramsValue); if (moduleString == NULL) goto loser; } PORT_Free(paramsValue); paramsValue = NULL; } if ((moduleCount+1) >= useCount) { SECStatus rv; rv = sftkdb_growList(&moduleList, &useCount, moduleCount+1); if (rv != SECSuccess) { goto loser; } } if (internal) { moduleList[0] = moduleString; } else { moduleList[moduleCount] = moduleString; moduleCount++; } moduleString = NULL; internal = PR_FALSE; skipParams = PR_FALSE; } if (moduleString) { PORT_Free(moduleString); moduleString = NULL; } done: /* if we couldn't open a pkcs11 database, look for the old one */ if (fd == NULL) { char *olddbname = sftk_getOldSecmodName(dbname,filename); PRStatus status; char **oldModuleList; int i; /* couldn't get the old name */ if (!olddbname) { goto bail; } /* old one doesn't exist */ status = PR_Access(olddbname, PR_ACCESS_EXISTS); if (status != PR_SUCCESS) { goto bail; } oldModuleList = sftkdbCall_ReadSecmodDB(appName, filename, olddbname, params, rw); /* old one had no modules */ if (!oldModuleList) { goto bail; } /* count the modules */ for (i=0; oldModuleList[i]; i++) { } /* grow the moduleList if necessary */ if (i >= useCount) { SECStatus rv; rv = sftkdb_growList(&moduleList,&useCount,moduleCount+1); if (rv != SECSuccess) { goto loser; } } /* write each module out, and copy it */ for (i=0; oldModuleList[i]; i++) { if (rw) { sftkdb_AddSecmodDB(dbType,appName,filename,dbname, oldModuleList[i],rw); } if (moduleList[i]) { PORT_Free(moduleList[i]); } moduleList[i] = PORT_Strdup(oldModuleList[i]); } /* done with the old module list */ sftkdbCall_ReleaseSecmodDBData(appName, filename, olddbname, oldModuleList, rw); bail: if (olddbname) { PR_smprintf_free(olddbname); } } if (!moduleList[0]) { char * newParams; moduleString = PORT_Strdup(SFTK_DEFAULT_INTERNAL_INIT1); newParams = sftkdb_quote(params,'"'); if (newParams == NULL) goto loser; moduleString = sftkdb_DupCat(moduleString, newParams); PORT_Free(newParams); if (moduleString == NULL) goto loser; moduleString = sftkdb_DupCat(moduleString, SFTK_DEFAULT_INTERNAL_INIT2); if (moduleString == NULL) goto loser; moduleString = sftkdb_DupCat(moduleString, SECMOD_SLOT_FLAGS); if (moduleString == NULL) goto loser; moduleString = sftkdb_DupCat(moduleString, SFTK_DEFAULT_INTERNAL_INIT3); if (moduleString == NULL) goto loser; moduleList[0] = moduleString; moduleString = NULL; } failed = PR_FALSE; loser: /* * cleanup */ /* deal with trust cert db here */ if (moduleString) { PORT_Free(moduleString); moduleString = NULL; } if (paramsValue) { PORT_Free(paramsValue); paramsValue = NULL; } if (failed || (moduleList[0] == NULL)) { /* This is wrong! FIXME */ sftkdb_releaseSpecList(moduleList); moduleList = NULL; failed = PR_TRUE; } if (fd != NULL) { fclose(fd); } else if (!failed && rw) { /* update our internal module */ sftkdb_AddSecmodDB(dbType,appName,filename,dbname,moduleList[0],rw); } return moduleList; } SECStatus sftkdb_ReleaseSecmodDBData(SDBType dbType, const char *appName, const char *filename, const char *dbname, char **moduleSpecList, PRBool rw) { if ((dbType == SDB_LEGACY) || (dbType == SDB_MULTIACCESS)) { return sftkdbCall_ReleaseSecmodDBData(appName, filename, dbname, moduleSpecList, rw); } if (moduleSpecList) { sftkdb_releaseSpecList(moduleSpecList); } return SECSuccess; } /* * Delete a module from the Data Base */ SECStatus sftkdb_DeleteSecmodDB(SDBType dbType, const char *appName, const char *filename, const char *dbname, char *args, PRBool rw) { /* SHDB_FIXME implement */ FILE *fd = NULL; FILE *fd2 = NULL; char line[MAX_LINE_LENGTH]; char *dbname2 = NULL; char *block = NULL; char *name = NULL; char *lib = NULL; int name_len, lib_len; PRBool skip = PR_FALSE; PRBool found = PR_FALSE; if ((dbType == SDB_LEGACY) || (dbType == SDB_MULTIACCESS)) { return sftkdbCall_DeleteSecmodDB(appName, filename, dbname, args, rw); } if (!rw) { return SECFailure; } dbname2 = strdup(dbname); if (dbname2 == NULL) goto loser; dbname2[strlen(dbname)-1]++; /* do we really want to use streams here */ fd = fopen(dbname, "r"); if (fd == NULL) goto loser; fd2 = fopen(dbname2, "w+"); if (fd2 == NULL) goto loser; name = sftk_argGetParamValue("name",args); if (name) { name_len = PORT_Strlen(name); } lib = sftk_argGetParamValue("library",args); if (lib) { lib_len = PORT_Strlen(lib); } /* * the following loop takes line separated config files and colapses * the lines to a single string, escaping and quoting as necessary. */ /* loop state variables */ block = NULL; skip = PR_FALSE; while (fgets(line, sizeof(line), fd) != NULL) { /* If we are processing a block (we haven't hit a blank line yet */ if (*line != '\n') { /* skip means we are in the middle of a block we are deleting */ if (skip) { continue; } /* if we haven't found the block yet, check to see if this block * matches our requirements */ if (!found && ((name && (PORT_Strncasecmp(line,"name=",5) == 0) && (PORT_Strncmp(line+5,name,name_len) == 0)) || (lib && (PORT_Strncasecmp(line,"library=",8) == 0) && (PORT_Strncmp(line+8,lib,lib_len) == 0)))) { /* yup, we don't need to save any more data, */ PORT_Free(block); block=NULL; /* we don't need to collect more of this block */ skip = PR_TRUE; /* we don't need to continue searching for the block */ found =PR_TRUE; continue; } /* not our match, continue to collect data in this block */ block = sftkdb_DupCat(block,line); continue; } /* we've collected a block of data that wasn't the module we were * looking for, write it out */ if (block) { fwrite(block, PORT_Strlen(block), 1, fd2); PORT_Free(block); block = NULL; } /* If we didn't just delete the this block, keep the blank line */ if (!skip) { fputs(line,fd2); } /* we are definately not in a deleted block anymore */ skip = PR_FALSE; } fclose(fd); fclose(fd2); /* rename dbname2 to dbname */ if (found) { PR_Delete(dbname); PR_Rename(dbname2,dbname); } PORT_Free(dbname2); return SECSuccess; loser: if (fd != NULL) { fclose(fd); } if (fd2 != NULL) { fclose(fd2); } if (dbname2) { PR_Delete(dbname2); PORT_Free(dbname2); } return SECFailure; } /* * Add a module to the Data base */ SECStatus sftkdb_AddSecmodDB(SDBType dbType, const char *appName, const char *filename, const char *dbname, char *module, PRBool rw) { FILE *fd = NULL; char *block = NULL; PRBool libFound = PR_FALSE; if ((dbType == SDB_LEGACY) || (dbType == SDB_MULTIACCESS)) { return sftkdbCall_AddSecmodDB(appName, filename, dbname, module, rw); } /* can't write to a read only module */ if (!rw) { return SECFailure; } /* remove the previous version if it exists */ (void) sftkdb_DeleteSecmodDB(dbType, appName, filename, dbname, module, rw); /* do we really want to use streams here */ fd = fopen(dbname, "a+"); if (fd == NULL) { return SECFailure; } module = sftk_argStrip(module); while (*module) { int count; char *keyEnd = PORT_Strchr(module,'='); char *value; if (PORT_Strncmp(module, "library=", 8) == 0) { libFound=PR_TRUE; } if (keyEnd == NULL) { block = sftkdb_DupCat(block, module); break; } value = sftk_argFetchValue(&keyEnd[1], &count); block = sftkdb_DupnCat(block, module, keyEnd-module+1); if (block == NULL) { goto loser; } if (value) { block = sftkdb_DupCat(block, sftk_argStrip(value)); PORT_Free(value); } if (block == NULL) { goto loser; } block = sftkdb_DupnCat(block, "\n", 1); module = keyEnd + 1 + count; module = sftk_argStrip(module); } if (block) { if (!libFound) { fprintf(fd,"library=\n"); } fwrite(block, PORT_Strlen(block), 1, fd); fprintf(fd,"\n"); PORT_Free(block); block = NULL; } fclose(fd); return SECSuccess; loser: PORT_Free(block); fclose(fd); return SECFailure; }