Contains the implementation of the block store
In this pr is a simple way to send and receive data through a database
I have implemented the base functionality as well as quite a few tests
to make sure that everything works
There are a few methods that have yet to be implemented, but
theoretically they should be implemented as calls to the other
functions, ie append should just be a call to WriteAt
This doesn't affect anything yet so it can safely be merged whenever. I
don't want this pr to stagnate like file view, so I'm happy to write
multiple prs for this
This improves the ephemeral command runner to allow for honoring of
timeouts and proper handling of overriding the current working
directory. It also fixes some partially transparent font colors in light
mode, making them solid instead. It also updates the InputModel to be
auto-observable and utilize some getters to ensure the cmdinput is
getting updated whenever necessary state changes take place.
* feat: add gui elements to configure ssh pw cache
This adds a dropdown for on/off/notimeout, a number entry box for a
timeout value, and a toggle for clearing when the computer sleeps.
* fix: improve password timeout entry
This makes the password timeout more consistent by using an inline
settings element. It also creates the inline settings element to parse
the input.
* feat: turn sudo password caching on and off
* feat: use configurable sudo timeout
This makes it possible to control how long waveterm stores your sudo
password. Note that if it changes, it immediately clears the cached
passwords.
* fix: clear existing sudo passwords if switched off
When the sudo password store state is changed to "off", all existing
passwords must immediately be cleared automatically.
* feat: allow clearing sudo passwords on suspend
This option makes it so the sudo passwords will be cleared when the
computer falls asleep. It will never be used in the case where the
password is set to never time out.
* feat: allow notimeout to prevent sudo pw clear
This option allows the sudo timeout to be ignored while it is selected.
* feat: adjust current deadline based on user config
This allows the deadline to update as changes to the config are
happening.
* fix: reject a sudopwtimeout of 0 on the backend
* fix: use the default sudoPwTimeout for empty input
* fix: specify the timeout length is minutes
* fix: store sudopwtimeout in ms instead of minutes
* fix: formatting the default sudo timeout
By changing the order of operations, this no longer shows up as NaN if
the default is used.
* refactor: consolidate inlinesettingstextedit
This removes the number variant and combines them into the same class
with an option to switch between the two behaviors.
* refactor: consolidate textfield and numberfield
This removes the number variant of textfield. The textfield component
can now act as a numberfield when the optional isNumber prop is true.
* added ai timeout setting
* addressed review comments
* fixed baseurl gating for telemetry
* updated copy
* addressed review comments
* removed prefix for client:show and added units to timeout
* changed timeout to use ms precision
* save work
* reusable StyleBlock component
* StyleBlock in elements dir
* root level
* ability to inherit root styles
* change prop from classname to selector
* selector should always be :root
* remove selector prop from StyleBlock
* working
* cleanup
* loadThemeStyles doesn't have to be async
* revert changes in tabs2.less
* remove old implementation
* cleanup
* remove file from another branch
* fix issue where line in history view doesn't reflect the terminal theme
* add key and value validation
* add label to tab settings terminal theme dropdown
* save work
* save work
* save work
* working
* trigger componentDidUpdate when switching tabs and sessions
* cleanup
* save work
* save work
* use UpdatePacket for theme changes as well
* make methods cohesive
* use themes coming from backend
* reload terminal when styel block is unmounted and mounted
* fix validation
* re-render terminal when theme is updated
* remove test styles
* cleanup
* more cleanup
* revert unneeded change
* more cleanup
* fix type
* more cleanup
* render style blocks in the header instead of body using portal
* add ability to reuse and dispose TermThemes instance and file watcher
* remove comment
* minor change
* separate filewatcher as singleton
* do not render app when term theme style blocks aren't rendered first
* only render main when termstyles have been rendered already
* add comment
* use DoUpdate to send themes to front-end
* support to watch subdirectories
* added support for watch subdirectories
* make watcher more flexible so it can be closed anywhere
* cleanup
* undo the app/main split
* use TermThemesType in creating initial value for Themes field
* simplify code
* fix issue where dropdown label doesn't float when the theme selected is Inherit
* remove unsed var
* start watcher in main, merge themes (don't overwrite) on event.
* ensure terminal-themes directory is created on startup
* ah, wait for termThemes to be set (the connect packet needs to have been processed to proceed with rendering)
* Simplify scrollHistoryItemIntoView
* remove unnecessary block argument
* actually the block nearest is necessary, otherwise the scroll will jump even if the item is already in view
* keybinding fixes
* changed screen and session commands to functions rather than slash commands to avoid printing errors
* added a static wait for console commands
* added sleep hardcode
* add an isArray check for commandStr
* Make the auxView tilebar optional and make sure it flows as part of the flexbox
* simplify condition
* fix ai chat scroll direction
* remove unnecessary change
* remove unused class
* fix: ignore computer sleep for telemetry clock
This uses unix time with regular integer comparisons to prevent the
telemetry clock from needing to wait for 8 hours of the program running.
Now, it only needs to wait 8 real-time hours instead.
* drop telemetry time to 4 hours, tick every 10 minutes
* create tab context menu (for close tab)
* small update to ctx menu, also make all tab deletes (including keybinding) not popup confirm modal if less than 10 blocks
* feat: share sudo between pty sessions
This is a first pass at a feature to cache the sudo password and share
it between different pty sessions. This makes it possible to not require
manual password entry every time sudo is used.
* feat: allow error handling and canceling sudo cmds
This adds the missing functionality that prevented failed sudo commands
from automatically closing.
* feat: restrict sudo caching to dev mode for now
* modify fullCmdStr not pk.Command
* refactor: condense ecdh encryptor creation
This refactors the common pieces needed to create an encryptor from an
ecdh key pair into a common function.
* refactor: rename promptenc to waveenc
* feat: add command to clear sudo password
We currently do not provide use of the sudo -k and sudo -K commands to
clear the sudo password. This adds a /sudo:clear command to handle it in
the meantime.
* feat: add kwarg to force sudo
In cases where parsing for sudo doesn't work, this provides an alternate
wave kwarg to use instead. It can be used with [sudo=1] at the beginning
of a command.
* refactor: simplify sudoArg parsing
* feat: allow user to clear all sudo passwords
This introduces the "all" kwarg for the sudo:clear command in order to
clear all sudo passwords.
* fix: handle deadline with real time
Golang's time module uses monatomic time by default, but that is not
desired for the password timeout since we want the timer to continue
even if the computer is asleep. We now avoid this by directly comparing
the unix timestamps.
* fix: remove sudo restriction to dev mode
This allows it to be used in regular builds as well.
* fix: switch to password timeout without wait group
This removes an unnecessary waiting period for sudo password entry.
* fix: update deadline in sudo:clear
This allows sudo:clear to cancel the goroutine for watching the password
timer.
* fix: pluralize sudo:clear message when all=1
This changes the output message for /sudo:clear to indicate multiple
passwords cleared if the all=1 kwarg is used.
* fix: use GetRemoteMap for getting remotes in clear
The sudo:clear command was directly looping over the GlobalStore.Map
which is not thread safe. Switched to GetRemoteMap which uses a lock
internally.
* fix: allow sudo metacmd to set sudo false
This fixes the logic for resolving if a command is a sudo command. This
change makes it possible for the sudo metacmd kwarg to force sudo to be
false.
* starting work on new dynamic context menu system
* untested contextmenu model integrated with electron api
* implement custom line context menu, copy visible output + copy full output
* implement minimize/maximize, restart, and delete
* add command validation to shellapi. mock out bash/zsh versions
* implement validate command fn bash and zsh
* test validate command
* change rtnstate commands to always end with a builtin, so we always get our exit trap to run
* simplify the rtnstate modification, don't add the 'wait' (as this is a different problem/feature)
* update schema
* cop button
* cleanup
* fix wrong type
* updates to try to set the cmdinput position (as well as text). fix button alignment, change checkmark to green (and extend), and remove the transition from parent component and move to copy (sawka)
* fix: add vix for missing known_hosts file
In a recent cleanup, I accidentally deleted this fix from before. This
adds it back.
* chore: clarify that the ssh should use private key
* Clean up cmdinput
* Remove unused css styles, clicking on textarea will focus back to textarea without closing history
* cleanup logic for activating textarea
* actions buttons should always show, should properly disable inactive views
* clicking actions toggles the view
* remove titlebar spacer, clean up padding
* Make AIChat and HistoryInfo share a common layout
* fix ai chat scroll
* clean up formatting
* fix chat textarea resizing
* align prompt and input
* update infomsg to use auxview
* update comments
* fix widths and key error
* add todo
* adjust padding for input, remove debug
* Don't capture clicks on the prompt area
* have initial run-command return faster to the frontend for quicker updating. cuts time from 70-80ms down to 20ms for an average command
* remove wlogs
* more logging cleanup
* fix focus for when start cmd returns an error
* initial
* save work, starting to add backend types
* save work
* save work
* Add EphemeralWriteCloser
* Command pipes thru, triggers infinite loop
* save debugging
* fix bad merge
* save debug statements
* fixing spaghetti
* clean up code
* got cwd override working
* Add separate paths for stdout and stderr writers
* fix stdout/stderr
* env vars are now working
* revert waveshell changes
* Making EphemeralWriteCloser into a more generic BufferedPipe
* formatting
* comment
* delete unused package
* more naming changes
* add package comment
* add UsePty to EphemeralRunOpts
* document UsePty
* ensure only one downstream writer can read from the buffer
* store pointer to syncs
* remove inshellisense stuff for now
* remove debugs
* revert yarn
* remove unnecessary debugs in main-server
* more debugging removed
* revert tsconfig
* init
* use setStyleVar
* backend implementation. scrope level terminal theming.
* only invoke this.applyTermTheme for keys that are updated. command runner for global term theme
* invoke applyTermTheme for global terminal themes as well
* fix nil error
* fix issue were theme can't be found
* fix issue where selected termtheme is not set as default value
* term theme switcher for session
* do not force reload after setting css vars
* fix issues. screenview terminal theme switcher
* remove debugging code
* move getTermThemes to util
* fix global theme reset
* fix workspace theme reset
* fix screenview terminal theme reset issue
* cleanup
* do not apply theme if theme hasn't changed
* do not apply theme if theme hasn't changed in workspace view
* cleanup
* cleanup
* force reload terminal
* fix inconsistency
* fix reset issue
* add a mobx reaction so that theming working when switching sessions
* workig reset
* simplify and cleanup
* refactor
* working global and session terminal theming
* add check
* perf improvement
* more perf improvements
* put reaction componentDidUpdate to make sure ref is already associated to the element
* cleanup
* fix issue where session theme is overriden by global theme on reload
* reduce flickering on reload
* more on reducing flickering on reload
* cleanup
* more cleanup
* fix file not found when no global theme is set
* screen level terminal theming
* update comment
* re-render terminal in history view. cleanup.
* cleanup
* merge main
* remote statemap from waveshell server (diff against initial state)
* move ShellStatePtr from sstore to packet so it can be passed over the wire
* add finalstatebaseptr to cmddone
* much improved diff computation code on wavesrv side
* fix displayname -- now using hash
* add comments, change a couple msh.WriteToPtyBuffer calls to log.Printfs
* added domain callback for every layer
* added domain callback for every layer
* switched dump logs to false
* dropdown fixes
* moved uuid back to constructor
A recent change made it possible to get stuck in a loop when connecting
to a remote. This reverts the part of it that caused this while
retaining the other behavior. This makes it possible to add to blank
known_host files again. It also adds a printout to display when a
connection is complete.
Previously, .wave-button had `display: block;` overwriting the expected
`display: flex;`. This resulted in buttons with an icon being aligned
vertically instead of horizontally. This change removes the undesired
`display: block;` so the buttons are formatted horizontally again.
* upped max length
* added client:get and client:info, upped max length of baseurl
* added openai prefix for consistency
* updated client:show command and removed client:get and client:info
* Add overlay scrollbar to left sidebar
* Keep active session bolded when mainview is not session
* fix color of scrollbar
* swap expression args
* add active color for scrollbar
* add active/highlight to history, connections, and settings
* working on re-init when you create a tab. some refactoring of existing reinit to make the messaging clearer. auto-connect, etc.
* working to remove the 'default' shell states out of MShellProc. each tab should have its own state that gets set on open.
* refactor newtab settings into individual components (and move to a new file)
* more refactoring of tab settings -- use same control in settings and newtab
* have screensettings use the same newtab settings components
* use same conn dropdown, fix classes, update some of the confirm messages to be less confusing (replace screen with tab)
* force a cr on a new tab to initialize state in a new line. poc right now, need to add to new workspace workflow as well
* small fixups
* remove nohist from GetRawStr, make const
* update hover behavior for tabs
* fix interaction between change remote dropdown, cmdinput, error handling, and selecting a remote
* only switch screen remote if the activemainview is session (new remote flow). don't switch it if we're on the connections page which is confusing. also make it interactive
* fix wording on tos modal
* allow empty workspaces. also allow the last workspace to be deleted. (prep for new startup sequence where we initialize the first session after tos modal)
* add some dead code that might come in use later (when we change how we show connection in cmdinput)
* working a cople different angles. new settings tab-pulldown (likely orphaned). and then allowing null activeScreen and null activeSession in workspaceview (show appropriate messages, and give buttons to create new tabs/workspaces). prep for new startup flow
* don't call initActiveShells anymore. also call ensureWorkspace() on TOS close
* trying to use new pulldown screen settings
* experiment with an escape keybinding
* working on tab settings close triggers
* close tab settings on tab switch
* small updates to tos popup, reorder, update button text/size, small wording updates
* when deleting a screen, send SIGHUP to all running commands
* not sure how this happened, lineid should not be passed to setLineFocus
* remove context timeouts for ReInit (it is now interactive, so it gets canceled like a normal command -- via ^C, and should not timeout on its own)
* deal with screen/session tombstones updates (ignore to quite warning)
* remove defaultfestate from remote
* fix issue with removing default ris
* remove dead code
* open the settings pulldown for new screens
* update prompt to show when the shell is still initializing (or if it failed)
* switch buttons to use wave button class, update messages, and add warning for no shell state
* all an override of rptr for dyncmds. needed for the 'connect' command (we need to set the rptr to the *new* connection rather than the old one)
* remove old commented out code
* save work
* Add native theme support
* update index
* update var name
* remove comment
* fix code setting
* bump render version on change
* remove themeutil
* added term keybindings
* removed logs and added a dump logs flag in keyutil
* un capture keys that we aren't using
* moved keybindings to inside terminal
* added utils to get all of the keybinds and pretty print them, for display purposes
* added info section
* clarifying meta and alt behavior
* changed keybinduidescription to keybind config
* first draft at modal keybindings
* added modal keybindings and inline settings text edit keybindings
* added switch for keybindings in modal footer
* removed logs
* remove another console.log
* fix userinput keybindings -- should be generic:cancel for 2nd one
* first commit for textarea keybindings
* added empty onkeydown to get around default behavior for now
* added history keybindings
* removed tab special case
* fix two small issues with keybindings
* fix error logs in scws
* new RpcFollowUpPacketType
* make the rpc/followup handlers generic on the server side -- using new RpcHandlers map and RpcFollowUpPacketType
* rpcinputpacket for passing user input back through to reinit command
* add WAVETERM_DEV env var in dev mode
* remove unused code, ensure mshell and rcfile directory on startup (prevent root clobber with sudo)
* combine all feinput into one function msh.HandleFeInput, and add a new concept of input sinks for special cases (like reinit)
* allow reset to accept user input (to get around interactive initialization problems)
* tone down the selection background highlight color on dark mode. easier to read selected text
* fix command focus and done focus issues with dynamic (non-run) commands
* add 'module' as a 'rtnstate' command (#478)
* reinitialize shells in parallel, fix timeouts, better error messages
* reset command now initiates and completes async so there is feedback that something is happening when it takes a long time
* switch from standard rpc to rpciter
* checkpoint on reinit -- stream output, stats packet, logging to cmd pty, new endBytes for EOF
* make generic versions of endbytes scanner and channel output funcs
* update bash to use more modern state parsing (tricks learned from zsh)
* verbose mode, fix stats output message
* add a diff when verbose mode is on
* checkpoint. track zmodloads, get the expanded PS1 value, change how we store and deal with 'prompt vars', add commands to track k8s context
* fix some warnings, change IsPVar to IsExtVar, checkpoint
* parse zmodloads into state
* restore zmodloads, be more careful around readonly variable setting to avoid errors
* remove unused vars
* replace remote status vars with --app-* vars
* replace status indicator vars with --app-* vars
* remove unused vars in default.css
* no need for bg color in view
* use --app* colors for view color
* remove --app-black var
* remove some unused css and divs
* datepicker. add electron-rebuild sa dev dependency
* comments
* use <If> component for conditional renders
* invoke callback on month change
* individual inputs for date parts
* keyboard support for input
* more on keyboard support
* dynamic setting of input width based on their text value
* remove error if fromts is out of range
* format is optional
* undo electron-rebuild
* init
* model
* pass model
* increase snap threshold
* move saving of state to model. backend implementation
* fix wrong clientdata prop
* right header space for right sidebar toggles
* button component refactor
* set default classname to primary
* remove debugging code
* hide trigger for now
* refactor Button. replace old buttons with Button element
* fix issue with closing alert modal
* make small button a little more round
* hide right sidebar toggle in prod
* Extend bottom border for mainview underneath window controls
* Make sidebar button hover color an accent color
* revert 87 to 88
* make mint less bright on light mode
* revert modal border change
* fix exitcode return to handle signals correctly -- use bash convention of 128 + signum. don't show red error mask for SIGINT or SIGPIPE
* dont show left border for errors unless selected
* init
* model
* pass model
* increase snap threshold
* move saving of state to model. backend implementation
* fix wrong clientdata prop
* right header space for right sidebar toggles
* button component refactor
* set default classname to primary
* remove debugging code
* hide trigger for now
* disable right sidebar in production (only show on dev for now)
* remove two unused packet types, remove unused detatched command code
* CmdStart is invalid in this command loop
* slight refactor, remove closure funcs
* pass rct through to 'handle' funcs
* deal with rct (running command), update handler funcs accordingly
* update for runningcmdtype to be a pointer in the map (for updates)
* lots of changes related to ephemeral commands (for sync), checkpoint
* fix ephemeral setting
* sync shell state when you switch to a new tab
We use AppleLocale to get the desired language when running on macos.
Unfortunately, if a region is set, the locale is not equivalent to the
LANG environment variable. It appends an extra region field that we did
not previously filter out. This change ensures that it will be filtered
out when present.
* first pass of slash commands
* added mainview slashcommand
* added focus cmd input, added sleep
* addressed review comments
* addressed feedback
* demo idea of changing hide do cmd+m, can remove if we decide we don't like it
* added new keybinding for minimize
* addressed feedback
* added hide label
* fix hide (use app.hid(), not window.hide()
* fix history keybinding, make mainview command consistent
* update mask color for tabswitcher to work on lightmode
* fix background color on code blocks in markdown in light mode
* update wording on disconnected modal (restart wave backend instead of restart server)
* fix tooltip (should be Ctrl-Space)
* cleanup line-height/padding for code blocks
This adds support for Arch Linux via pacman. It also updates the product tagline in package.json and the "About" modal. It also removes the unused "Help" menu and updates the copyright year in About and fixes the window icon display on Linux.
* convert table to div
* remove comment
* more history UI updates. copy/use controls, change font, fix scroll area
* use css variables
* fix textfield placeholder color
* put back input styles
* change overflow-x to auto
* fix: set golbal ssh config to correct path
This adds the missing "etc" directory to the path for the global config
file.
* chore: update auth mode tooltip
This just changes the text to be slightly more accurate to the current
behavior.
* feat: add box to disable waveshell install modal
This hooks in to the existing don't show this again code that pops up
when creating a modal.
* refactor: remove install modal in remote creation
There used to be a modal that popped up while installing a remote that
informed the user that waveshell gets installed on their remote. Since
we have a new modal that pops up at the time of install, the older modal
can be removed.
* fix: allow user to cancel ssh dial
The new ssh code broke dial for invalid urls since the context did not
cancel the dial or any associated user input. This change reconnects
the context along with the context for installing waveshell.
* style: widen the rconndetail modal
The rconndetail modal is currently narrower than the xtermjs element
which results in awkward scrolling if a line is long. This change makes
the width auto so it can size itself as needed.
* add a max-width for safety
* Unify color definitions and clean up light mode
* consolidate form colors
* increase border thickness on dropdown and text
* remove dev conditional for theme
* fix secondary form element color
* increase dropdown border thickness
* fix history textinput
* make warning a bit darker
* attempt to fix rotate icons
* fix line actions bg
* fix terminal colors
* fix broken history colors
* fix textinput label padding
* fix bottom negative margin
* updates for prompt colors. darken magenta, grey out the whites slightly, and sneak in a change for git co.
* clean up prompt.tsx
* fixing wobbly icons
* center svg icon, simplify meta-line1
* clientsettings fixups -- border top, padding, and remove theme dropdown for prod
* new cmdinput actions, get the filter commands showing, titlebars for info history and info aichat, toggles for history
* checkpoint some ideas on a new branch
* checkpoint on new errors / errorcode passing
* get CodedError piped all the way through to infomsg
* implement a /reset:cwd command to deal with cases when the cwd is invalid. other assorted debugging, utility, and fixups
* on invalid cwd, show message to run /reset:cwd
* Sign and notarize in CI
* add dmg
* remove flag
* fix env var
* add team id
* conditionally set apple specific env vars
* publish to a staging location
* upload unzipped
* add script to publish to staging, update publish url
* turn off autodiscovery again
* update scripts
* deprecate old method
* move stuff
* remove autodiscovery
* fix: allow ssh user to use numbers/capital letters
Prior to this change, usernames could not start with numbers and could
not contain capital letters at all. Note that the username can also
start with capital letters.
* fix: update ssh_config with IdentityFiles fix
This adds the update that provides the ssh2 defaults for IdentityFiles.
This will allow the usual defaults to be searched when none are
explicitly provided.
* fix: overwrite identity files instead of appending
This change makes it so a waveterm configured identity file will
overwrite the one in the config instead of attempting to append it. This
matches the behavior of openssh.
* style: use regular font for markdown user input
This makes the Markdown User Input indistinct from user input without
markdown. It changes the font and makes a couple small adjustments to
the font size and line height.
* fix: use font property instead of font-family
The markdown css for User Input can be simplified with the font being
set by the "font" property rather than the "font-family" property.
* restore sidebar right border, fix line-container background color for history
* add a dev-only 'Toggle Dev UI' switch in the View Menu (for testing UI and screenshots, etc.)
* use native border (remove transparency from app window), remove css borders, remove default --term variables, force setClientData to set --term font variables on first set.
* terminal background images
* Add linux makers
* missed some
* remove eu-strip
* blah
* add description
* remove v from version
* add exec name
* use bin
* add bin to both
* test flatpak
* test adding dev dependencies
* remove flatpak for now
* add command to flatten directory structure
* update package info
* save rpm info
* save work
* add bin to packagerConfig
* save work
* okay let's see what happens
* iterate array
* test more
* remove large
* test
* test
* remove linux arm
* test addl targets
* add quiet to zip
* revert dir flatten
* remove pacman
* add s3 bucket to electron-builder config
* make dir
* only copy artifacts
* don't merge
* zip recurse
* blah
* replace with electronupdater
* make generic
* fix
* fix stuff
* Update build-helper.yml
* test fix
* fix path
* remove tree
* messed up comment
* remove touch
* add platform name to artifact
* remove license
* remove forge
* cleanup builder config
* switch artifact name order
* Remove darwin restriction on autoupdate
* try adding back pacman
* fix license
* remove pacman again
* rewrite scripts
* add binary paths to builder
* clean up
* Update scripts
* update interval and readme
* remove flatpak and snap dependencies for now
* upload with a wildcard
* fix paths for addl binaries
* add back blockmap
* update release path
* add newline
* remove forge config
* 2 small fixes - remove double cd for waveshell building, and remove GOARCH for wavesrv binary in dev mode
* light theme for button element
* light them for connections view
* remove box-shadows
* light theme for textfield
* unify form elements colors
* light theme for modals
* remove inset from modal box-shadow
* light theme for tooltip
* remove empty fies. theme new tab setting spacer
* light theme for cmdinput
* light theme for scroll
* minor global color change
* connections and history view light theme improvements
* light them for line actions bg
* light theme for sidebar actions
* more on line themes and fixes
* use font shorthand
* use --form-element-* for all form elements colors
* update/remove some cmdiput colors
* update terminal colors for light mode
* move term lightmode settings to new file (needs updates for more contrast)
* lighten up panel color, remove 'dev' panel color for now (since we're testing light mode)
---------
Co-authored-by: sawka <mike.sawka@gmail.com>
* updating fonts and colors
* use wavegreen for green
* cmdinput should use terminal colors
* adjust colors, bright up bright-white. cmdinput use more term colors.
* feat: allow user input verification for install
Depending on the method of installing waveshell, it may be desired to
pop up a modal for user verification. This is a first pass at handling
these special cases. The focus is on installing while previously
connected and auto installing while connecting.
* chore: update mshell to waveshell in error msg
* fix: run waveshell remotely with chosen shell
This ensures that the appropriate shell is used to run the waveshell
command remotely. It hasn't made a difference in my experience but is
desired in order to match the local launch.
* chore: simplify command to run waveshell remotely
This change removes the extra check for a directory and just tries to
run the command instead. It pipes the usual error to null and prints an
init packet instead.
* fix: prevent wavesrv crash during bad connection
The waveshell launch can fail in two different ways. If it has a
recoverable failure, it will attempt to reinstall waveshell. If not, it
is supposed to print an error. The unrecoverable case was causing a
segfault due to a misnamed variable. This change corrects it.
* fix: correct auto install user input modal
The previous combination of flags to catch auto install did not work
properly. This corrects them.
* chore: add "s" to countdown for user input timer
Makes it clear that the countdown is seconds.
* fix: remove auto password entry for sudo remote
The auto password entry for sudo remotes printed an error that was not
in response to the user input. To avoid this confusion, it has been
removed entirely.
* feat: add auto focus to user input modal
This automatically moves the cursor to the text box when the modal pops
up.
* feat: handle enter/escape keys for password entry
The password modal previously had to have buttons clicked to close it.
This change allows the user to close it with whatever is bound to escape
and to submit with whatever is bound to enter.
* chore: update an any type to correct type
* fix: correct keyboard event type from last commit
* fix: check identity files are readable early
Previously, an invalid identity file would send a dummy signer if the
file didn't exist. This resulted in extra sign in attempts that have no
chance of success. This could cause someone to get locked out of a
connection because of too many failed attempts. By performing the check
early, we no longer have to make these extra attempts.
* fix: only check global known hosts as root
The root user should not be able to write to a local known_hosts file.
If it does, it risks overwriting the default global behavior for only
the root user. This problem would only occur if waveterm was launched as
root, but we should protect against it just in case.
* feat: add remote name for remote password prompt
This change clarifies the remote name for password and keyboard
interactive prompts. It displays a message that authentication has been
requested from <hostname>. It is not added to publickey passphrase since
those phrases are specific to the key and not the remote.
* revert "simplify cmd to run waveshell remotely"
This reverts commit 4e5eea51b65318428f83a16133b7cc3df53832bd.
* init
* init
* theme override mechanism by changing href value in header link tag
* remove debugging code
* remove debugging code. no need to force rerender
* remove overrides.less
* get some light colors showing in light theme
* working on MagicLayout. update constants and move to dynamic computation in textmeasure.
* magic line height -- no jitter. and add some debugging code for helping to fix future problems
* fix openai fonts
* font updates, settings modals, tabs, change base font.
* aichat responses
* fix updatemodel errors/warnings. more font inconsistencies
* history fixes
* more fixups, fix some warnings, text/font updates for various subsystems
* refactor launch code to integrate install easier
The previous set up of launch was difficult to navigate. This makes it
much clearer which will make the auto install flow easier to manage.
* feat: integrate auto install into new ssh setup
This change makes it possible to auto install using the ssh library
instead of making a call to the ssh cli command. This will auto install
if the installed waveshell version is incorrect or cannot be found.
* chore: clean up some lints for sshclient
There was a context that didn't have it's cancel function deferred and
an error that wasn't being handle. They're fixed now.
* fix: disconnect client if requested or launch fail
A recent commit made it so a client remained part of the MShellProc
after being disconnected. This is undesireable since a manual
disconnection indicates that the user will need to enter their
credentials again if required. Similarly, if the launch fails with an
error, the expectation is that credentials will have to be entered
again.
* fix: use legacy timer for the time being
The legacy timer frustrates me because it adds a lot of state to the
MShellProc struct that is complicated to manage. But it currently works,
so I will be keeping it for the time being.
* fix: change separator between remoteref and name
With the inclusion of the port number in the canonical id, the :
separator between the remoteref and remote name causes problems if the
port is parsed instead. This changes it to a # in order to avoid this
conflict.
* fix: check for null when closing extra files
It is possible for the list of extra files to contain null files. This
change ensures the null files will not be erroneously closed.
* fix: change connecting method to show port once
With port added to the canonicalname, it no longer makes sense to append
the port afterward.
* feat: use user input modal for sudo connection
The sudo connection used to have a unique way of entering a password.
This change provides an alternative method using the user input modal
that the other connection methods use. It does not work perfectly with
this revision, but the basic building blocks are in place. It needs a
few timer updates to be complete.
* fix: remove old timer to prevent conflicts with it
With this change the old timer is no longer needed. It is not fully
removed yet, but it is disabled so as to not get in the way.
Additionally, error handling has been slightly improved.
There is still a bug where an incorrect password prints a new password
prompt after the error message. That needs to be fixed in the future.
* Add delimiters to screen tab, make active gradient a translucent mask
* make delimiter slightly shorter
* move end icon a bit to provide more separation
* fix zindex for tab contents
* fix magic layout
* make the tabs closer to the width they used to be
* termfontsize-sm (for meta1). add some small margin. remove rootIndicator. switch cwd/remote to red if root
* break LineHeader out into its own react component
* actual set our --term colors as the *theme* for xtermjs
* move line-actions into its own div (absolute position). hover/background colors
* add duration, format renderer, spacing, remove meta-wrap
* simplify cmdtext output. simpler multi-line rendering.
* adjust position/height of line actions for better interaction with long lines
* fix horiz scrolling
* remove unused
* quick fix for text lines
* remove [local] from prompt, remove prompt icons, restore --term vars (remove --prompt vars)
* working on prompt colors, cmdtext
* more generous padding around commands (and cmdinput)
* fix cmdinput background color
* fixes for cmdinput info box
* Fix logo not being visible in auxiliary views when sidebar is collapsed
* Refactor auxiliary views into MainView component
* fix contents formatting
* Need a better-centered version of the logo for the sidebar
* Add logo back to the sidebar
* revert root.less change
* Fix regressions from last pr
* zero out subtractor if sidebar is collapsed
* remove unnecessary var
* clean up emain
* add restart on disable auto update
* save work
* add zip
* save
* fix zip command
* make build-universal more generic
* clean up script
* fix autoupdate config
* update feed
* fix update feed path
* switch to custom update flow
* show notification
* remove enum
* test change
* debug sidebar
* save work
* remove weird import
* remove listeners if present
* save debug
* fixed banner
* fix sending of appupdatestatus, add comments
* Change to primary feed
* more comments, less debugs
* rename to app update
* code cleanup, add fireAndForget
* update paths for objects
Electron version 28.1.2 introduced a bug where the traffic light to undo
fullscreen was not available in fullscreen. It has been fixed by the
most recent version, so we are upgrading to it.
* MonoFontSize type, add label font, theme vars for sidebar
* fix line-height for tabs
* experiment with variable label font
* lato font, fix open ai fonts, fix cmdinput font
* updates for historyinfo
* cmdinput history fixups, scrollbars
* work with scrollbars
* create another drag region at the end of the tabs bar
* updates for header -- change title drag area, fix corner rounding, tabs spacing, etc.
* css variables for sidebar
* type
* line css vars
* lines css vars
* bookmarks css vars
* clientsettings css vars
* button.less css vars
* checkbox.less css vars
* cmdstrcode.less css vars
* dropdown.less css vars
* markdown css vars
* status css vars
* convert all hex colors to rgb color
* textfield css vars
* toggle css vars
* tooltip css vars
* statusindicator css vars
* about modal css vars
* disconnected modal css vars
* editremoteconn modal css vars
* linesettings modal css vars
* tos modal css vars
* viewremoteconndetail modal css vars
* prompt css vars
* connections view css vars
* add colors comments
* history view css vars
* cmdinput css vars
* cmdinput css vars
* screenview css vars
* convert less vars to css vars
* store version for build in txt file
* get version from version.txt
* remove quotes
* Use version.js for Go version too
* test
* test
* simplify things more
* rename zips to consistent waveterm name
* remove newline
* always use v
* always use Wave rather than waveterm
* undo awkward backgrounds, transparencies, etc. hope to sharpen up the active blocks and the grey/transparent backgrounds were getting in the way
* block UI and cmdinput UI overhaul
* updates for cmdinput spacing, input-sep fonts
* remove nth-child special case, fix sidebar margins
* sidebar styles
* bring back selected line
* codeedit fixes for layout / colors
* Set build version programmatically in build-helper
* remove env var definition
* fix paths in helper scripts
* missing import
* missed some more relative paths
* reorganize line styles, split lines.less into lines.less and line.less
* switch everyone to use termFontSize getter (easier to find usages)
* better font-family font-size update logic
* update line styles, clean up more
* replace icons, fix line heights
* make paddings/margins more consistent
* fix more margins, make command completions use termfontfamily
* updates for cmdinput margins, font sizes, etc.
* fix more font sizes and margins (mostly command input)
* add comment
* testing hack font
* updates to allow font to be variable
* allow setting of font-family. get initial font family from electron (needed for loading)
* add termfontfamily
* update wave logos for README
* hook up fontfamily setting, remove old dropdown active var
* get app to reload on font change. reload fonts
* on termfontsize change, bump render version as well
* font loading fix#302
* fix inconsistent paddings. issue was that the first '[' feels indented (because of the fixed with font). applying a negative 2px margin fixes it and allows us to remove the paddings on the other elements.
* Break update code out of sstore
* add license disclaimers
* missed one
* add another
* fix regression in openai updates, remove unnecessary functions
* another copyright
* update casts
* fix issue with variadic updates
* remove logs
* remove log
* remove unnecessary log
* save work
* moved a bunch of stuff to scbus
* make modelupdate an object
* fix new screen not updating active screen
* add comment
* make updates into packet types
* different cast
* update comments, remove unused methods
* add one more comment
* add an IsEmpty() on model updates to prevent sending empty updates to client
* feat: parse multiple identity files in ssh
While this does not make it possible to discover multiple identity files
in every case, it does make it possible to parse them individually and
check for user input if it's required for each one.
* chore: remove unnecessary print in updatebus.go
* chore: remove unnecessary print in sshclient.go
* chore: remove old publicKey auth check
With the new callback in place, we no longer need this, so it has been
removed.
* refactor: move logic for wave and config options
The logic for making decisions between details made available from wave
and details made available from ssh_config was spread out. This change
condenses it into one function for gathering those details and one for
picking between them.
It also adds a few new keywords but the logic for those hasn't been
implemented yet.
* feat: allow attempting auth methods in any order
While waveterm does not provide the control over which order to attempt
yet, it is possible to provide that information in the ssh_config. This
change allows that order to take precedence in a case where it is set.
* feat: add batch mode support
BatchMode turns off user input to enter passwords for ssh. Because we
save passwords, we can still attempt these methods but we disable the
user interactive prompts in this case.
* fix: fix auth ordering and identity files
The last few commits introduced a few bugs that are fixed here. The
first is that the auth ordering is parsed as a single string and not a
list. This is fixed by manually splitting the string into a list. The
second is that the copy of identity files was not long enough to copy
the contents of the original. This is now updated to use the length of
the original in its construction.
* deactivate timer while connecting to new ssh
The new ssh setup handles timers differently from the old one due to the
possibility of asking for user input multiple times. This limited the
user input to entirely be done within 15 seconds. This removes that
restriction which will allow those timers to increase. It does not
impact the legacy ssh systems or the local connections on the new
system.
* merge branch 'main' into 'ssh--auth-control'
This was mostly straightforward, but it appears that a previous commit
to main broke the user input modals by deleting a function. This adds
that back in addition to the merge.
* fix: allow 60 second timeouts for ssh inputs
With the previous change, it is now possible to extend the timeout for
manual inputs. 60 seconds should be a reasonable starting point.
* fix: change size of dummy key to 2048
This fixes the CodeQL scan issue for using a weak key.
* working on easy global shortcut for wave
* globalshortcut setting working
* cmd for macos, alt for others
* re-remove types.ts (was added back during merge)
* rename DDItem to DropdownItem, put into custom.d.ts
* make some consts
* declare types as global
* remove mobx types aliases
* put back model_old.ts
* remove types.ts
* add main screens to Cmd-P search
* make viewData optional
* minor hint fix
* address improvements suggested by evan
* more on let to const
This PR changes ModelUpdate mechanism from a statically-typed struct to an interface, allowing us to define the update mechanism and the update types separately. This sets us up to move app logic and update mechanisms into separate packages. Ultimately, sstore will only define low-level persistence logic.
* feat: create backend for user input requests
This is the first part of a change that allows the backend to request
user input from the frontend. Essentially, the backend will send a
request for the user to answer some query, and the frontend will send
that answer back. It is blocking, so it needs to be used within a
goroutine.
There is some placeholder code in the frontend that will be updated in
future commits. Similarly, there is some debug code in the backend
remote.go file.
* feat: create frontend for user input requests
This is part of a change to allow the backend to request user input from
the frontend. This adds a component specifically for handling this
logic. It is only a starting point, and does not work perfectly yet.
* refactor: update user input backend/interface
This updates the user input backend to fix a few potential bugs. It also
refactors the user input request and response types to better handle
markdown and errors while making it more convenient to work with.
A couple frontend changes were made to keep everything compatible.
* fix: add props to user input request modal
There was a second place that the modals were created that I previously
missed. This fixes that second casel
* feat: complete user input modal
This rounds out the most immediate concerns for the new user input
modal. The frontend now includes a timer to show how much time is left
and will close itself once it reaches zero. Css
formatting has been cleaned up to be more reasonable.
There is still some test code present on the back end. This will be
removed once actuall examples of the new modal are in place.
* feat: create first pass known_hosts detection
Manually integrating with golang's ssh library means that the code must
authenticate known_hosts on its own. This is a first pass at creating a
system that parses the known hosts files and denys a connection if there
is a mismatch. This needs to be updated with a means to add keys to the
known-hosts file if the user requests it.
* feat: allow writing to known_hosts first pass
As a follow-up to the previous change, we now allow the user to respond
to interactive queries in order to determine if an unknown known hosts
key can be added to a known_hosts file if it is missing. This needs to
be refined further, but it gets the basic functionality there.
* feat: add user input for kbd-interactive auth
This adds a modal so the user can respond to prompts provided using the
keyboard interactive authentication method.
* feat: add interactive password authentication
This makes the ssh password authentication interactive with its own user
input modal. Unfortunately, this method does not allow trying a default
first. This will need to be expanded in the future to accomodate that.
* fix: allow automatic and interactive auth together
Previously, it was impossible to use to separate methods of the same
type to try ssh authentication. This made it impossible to make an auto
attempt before a manual one. This change restricts that by combining
them into one method where the auto attempt is tried once first and
cannot be tried again. Following that, interactive authentication can be
tried separately.
It also lowers the time limit on kbd interactive authentication to 15
seconds due to limitations on the library we are using.
* fix: set number of retries to one in ssh
Number of retries means number of attempts after the fact, not number of
total attempts. It has been adjusted from 2 to 1 to reflect this.
* refactor: change argument order in GetUserInput
This is a simple change to move the context to the first argument of
GetUserInput to match the convention used elsewhere in the code.
* fix: set number of retries to two again
I was wrong in my previous analysis. The number given is the total
number of tries. This is confusing when keyboard authentication and
password authentication are both available which usually doesn't happen.
* feat: create naive ui for ssh key passphrases
This isn't quite as reactive as the other methods, but it does attempt
to use publickey without a passphrase, then attempt to use the password
as the passphrase, and finally prompting the user for a passphrase. The
problem with this approach is that if multiple keys are used and they
all have passphrases, they need to all be checked up front. In practice,
this will not happen often, but it is something to be aware of.
* fix: add the userinput.tsx changes
These were missed in the previous commit. Adding them now.
* split settings modals
* init
* init
* remove styles not related to checkbox
* remove styles not related to CmdStrCode
* renderCmdText doesn't need styles
* remove styles not related to dropdown
* IconButton doesn't need styles because it extends Button
* remove old connections
* InfoMessage conmponent no longer needed
* fix import error
* remove styles not related to InlineSettingsTextEdit
* remove styles not related to InputDecoration
* LinkButton doesn't need styles cos it's extends Button component
* remove styles not related to markdown
* remove styles not related to modal
* NumberField doesn't need styles cos it extends TextField
* remove styles not related to PasswordField
* RemoteStatusLight no longer used. It's replaced by Status component.
* remove styles not related to ResizableSidebar
* SettingsError doesn't need styles cos it uses classnames in app.less
* remove styles not related to Status
* remove styles not related to TextField
* remove styles not related to Toggle
* remove styles not related to Tooltip
* init
* cleanup bookmarks model
* cleanup clientsettingsview model
* cleanup cmd model
* remove dayjs import from bookmarks model
* cleanup commandrunner model
* cleanup historyview model
* cleanup input model
* cleanup linecontainer model
* cleanup mainsidebar model
* cleanup main model
* cleanup plugins model
* cleanup remote model
* cleanup screen model
* cleanup screenlines model
* cleanup session model
* cleanup screenlinecontainer model
* cleanup connectionsview model
* add index.ts inside model dir
* replace /model_old imports with /model
* rename model to models
* move model_old to models
* fix ptyDataSource errors
* split models/model
* first pass of copy file
* first pass fixing up function
* fleshed out copy function, still working on display and parameters
* implemented scp like syntax
* finished implemententation of copy file - there are still issues
* more bug fixes, still running into error
* pushing waveshell concurrency and channel fixes - still need to do some qol fixes before merge
* aesthetic fixes and removed logs
* fixed bug in GetRemoteRuntimeState
* formatting small fix
* fixed pretty print bytes
* added local to local command
* small fix removing workaround
* added workaround back
* added some logs for debug
* added some more logs
* quick bug fix for update cmd race condition
* added fix for race condition
* added some more logs for debugging
* fixed up logs
* added proper fe state for dest parameter
* implemented setting status indicator output
* first pass at updating status indicators
* removed logs and small fix ups
* removed whitespace
* addressed review comments
* split settings modals
* init
* init
* remove styles not related to checkbox
* remove styles not related to CmdStrCode
* renderCmdText doesn't need styles
* remove styles not related to dropdown
* IconButton doesn't need styles because it extends Button
* remove old connections
* InfoMessage conmponent no longer needed
* fix import error
* remove styles not related to InlineSettingsTextEdit
* remove styles not related to InputDecoration
* LinkButton doesn't need styles cos it's extends Button component
* remove styles not related to markdown
* remove styles not related to modal
* NumberField doesn't need styles cos it extends TextField
* remove styles not related to PasswordField
* RemoteStatusLight no longer used. It's replaced by Status component.
* remove styles not related to ResizableSidebar
* SettingsError doesn't need styles cos it uses classnames in app.less
* remove styles not related to Status
* remove styles not related to TextField
* remove styles not related to Toggle
* remove styles not related to Tooltip
* wip
* integrate original sidebar content
* ResizableSidebar component
* trigger toggleCollapse
* remove debugging code
* minor refactor. disable text select on mousemove
* replace icons with fontawesome icons. fix alignment issues
* fix session view width when tabs overflow
* prevent index and icon from shifting when resizing
* snap effect
* minor refactor
* apply collapsed mode to sidebar contents
* change default width to 240px
* backend implementation
* fix wrong subcmd
* save collapsed state
* retore sidebar state on reload/launch
* use collapse data form db on first load. use previously saved width on expand.
* persist width as well collapse state
* various fixes and improvements
* bind methods
* refactor
* more refactor
* fix minor bug
* fix merge issues
* various fixes
* refactor
* fixes
* fix issues
* fix all issues
* resolve undefind tempWidth
* fix toggleCollapsed
* use Promise in stopResizing method
* use tempCollapsed to for real time toggling between logos
* minor method name change
* refactor
* remove debugging code
* fix conflict
* fix setting collapsed state via CLI
* minor refactor
* remove debugging code
* create setTempWidthAndTempCollapsed method
* handle invalid width set via cli
* refactor: setbycli not actually needed
* remove unused code
* add status-indicator-visible
* save
* save
* Prevent the status indicator flickering for quick returns
* flx regression
* reduce delay, reset spinnerVisible when there's no more running commands
* clean up code reuse
* move code around
* slight optimizations to prevent rendering before spinner is visible
* rename var
* revert shouldSync change as it broke the sync
* set animation startTime to sync spinners for status indicators
* catch animationstart (hover interaction) to restart startTime.
* use const
---------
Co-authored-by: Evan Simkowitz <esimkowitz@users.noreply.github.com>
* save
* not working yet but close
* logic is working, just need to do styling
* save work
* save
* save work
* ta da!
* fix line height
* format files
* remove running commands on hangup. also don't allow numrunning to be less than 0
* remove < 0 check (safer without for concurrency)
* working on cmd restart logic
* button to restart command
* bind Cmd-R to restart selected command, and Cmd-Shift-R to restart last command. Browser Refresh is now Option-R. also fix 'clear' command to not delete running commands (like archive). some small changes to keyboard utility code to always set 'alt' and 'meta' appropriately. use 'cmd' and 'option' for crossplatform bindings
* focus restarted line
* update termopts, use current winsize to set termopts for new command
* add cmd.restartts to track restart time
* display restarted time in line w/ tooltip with original time
* add restartts to line:show
* first pass of copy file
* first pass fixing up function
* first pass fixing key press
* fixed up key press parsing
* reverted cmdrunner.go
* fixed cmdrunner.go again :p
* fixed cmdrunner again lol
* Add job status indicators to tabs within a workspace (#232)
Adds job status indicators that will show any updates to running commands while you are focused away from a tab. These will show up as status icons in the tab view.
These indicators will reset for a given tab when you focus back to it.
I've updated the inner formatting of the tab to use flexboxes, allowing the title to display more text when there are no icons to display.
Also includes some miscellaneous for-loop pattern improvements in model.ts and removing of unused variables, etc.
* first pass fixing key press
* added key util check file
* addressed rebase artifacts
* fixed more rebase artifacts
* fixed keybindings
* removed log
* fixed a ton of rebase artifacts
* fixed a ton of rebase artifacts
* added cmd maps to altKey if not on macos
* fixed platform check code and fixed some small bugs
* save work
* refactor end-icon and actions-icon into separate components
* reverting change part 1
* fix
* separate out workspace and tab formatting more
* save work
* Got it working!
* fix scrollbar but hide it so that the formatting doesn't jump when hovering
* revert some changes, replace some svgs with fontawesome
* remove listitem
* remove log
* create proof of concept ssh library integration
This is a first attempt to integrate the golang crypto/ssh library for
handling remote connections. As it stands, this features is limited to
identity files without passphrases. It needs to be expanded to include
key+passphrase and password verifications as well.
* add password and keyboard-interactive ssh auth
This adds several new ssh auth methods. In addition to the PublicKey
method used previously, this adds password authentication,
keyboard-interactive authentication, and PublicKey+Passphrase
authentication.
Furthermore, it refactores the ssh connection code into its own wavesrv
file rather than storing int in waveshell's shexec file.
* clean up old mshell launch methods
In the debugging the addition of the ssh library, i had several versions
of the MShellProc Launch function. Since this seems mostly stable, I
have removed the old version and the experimental version in favor of
the combined version.
* allow switching between new and old ssh for dev
It is inconvenient to create milestones without being able to merge into
the main branch. But due to the experimental nature of the ssh changes,
it is not desired to use these changes in the main branch yet. This
change disables the new ssh launcher by default. It can be used by
changing the UseSshLibrary constant to true in remote.go. With this, it
becomes possible to merge these changes into the main branch without
them being used in production.
* fix: allow retry after ssh auth failure
Previously, the error status was not set when an ssh connection failed.
Because of this, an ssh connection failure would lock the failed remote
until waveterm was rebooted. This fix properly sets the error status so
this cannot happen.
* better osrelease parsing (ignore garbage at end of string)
* add defaultshelltype to telemetry input
* track reinit errors by shelltype to see if zsh integration is working
Readonly variables cannot be reset and attempting to do so causes errors
on my machine. The `keymaps` and `widgets` variables caused problems, so
they have been added to the list of variables to ignore.
* Tweak the color of the output status indicator, adjust the placement of the tab end-icons a bit
* adjust the margins a bit more
* a few more slight adjustments to even out the spacing
* save work
* fix nullref, some smaller tweaks to the front icon
* made the tab slightly smaller so that the ratios made more sense
* remove unnecessary width
* format fix
Adds job status indicators that will show any updates to running commands while you are focused away from a tab. These will show up as status icons in the tab view.
These indicators will reset for a given tab when you focus back to it.
I've updated the inner formatting of the tab to use flexboxes, allowing the title to display more text when there are no icons to display.
Also includes some miscellaneous for-loop pattern improvements in model.ts and removing of unused variables, etc.
---------
Co-authored-by: sawka <mike.sawka@gmail.com>
adds zsh support to waveterm. big change, lots going on here. lots of other improvements and bug fixes added while debugging and building out the feature.
Commits:
* refactor shexec parser.go into new package shellenv. separate out bash specific parsing from generic functions
* checkpoint
* work on refactoring shexec. created two new packages shellapi (for bash/zsh specific stuff), and shellutil (shared between shellapi and shexec)
* more refactoring
* create shellapi interface to abstract bash specific functionality
* more refactoring, move bash shell state parsing to shellapi
* move makeRcFile to shellapi. remove all of the 'client' options CLI options from waveshell
* get shellType passed through to server/single paths for waveshell
* add a local shelltype detector
* mock out a zshapi
* move shelltype through more of the code
* get a command to run via zsh
* zsh can now switch directories. poc, needs cleanup
* working on ShellState encoding differences between zsh/bash. Working on parsing zsh decls. move utilfn package into waveshell (shouldn't have been in wavesrv)
* switch to use []byte for vardecl serialization + diffs
* progress on zsh environment. still have issues reconciling init environment with trap environment
* fix typeset argument parsing
* parse promptvars, more zsh specific ignores
* fix bug with promptvar not getting set (wrong check in FeState func)
* add sdk (issue #188) to list of rtnstate commands
* more zsh compatibility -- working with a larger ohmyzsh environment. ignore more variables, handle exit trap better. unique path/fpath. add a processtype variable to base.
* must return a value
* zsh alias parsing/restoring. diff changes (and rtnstate changes). introduces linediff v1.
* force zmodload of zsh/parameter
* starting work on zsh functions
* need a v1 of mapdiff as well (to handle null chars)
* pack/unpack of ints was wrong (one used int and one use uint). turned out we only ever encoded '0' so it worked. that also means it is safe to change unpack to unpackUInt
* reworking for binary encoding of aliases and functions (because of zsh allows any character, including nulls, in names and values)
* fixes, working on functions, issue with line endings
* zsh functions. lots of ugliness here around dealing with line dicipline and cooked stty. new runcommand function to grab output from a non-tty fd. note that we still to run the actual command in a stty to get the proper output.
* write uuid tempdir, cleanup with tmprcfilename code
* hack in some simple zsh function declaration finding code for rtnstate. create function diff for rtnstate that supports zsh
* make sure key order is constant so shell hashes are consistent
* fix problems with state diffs to support new zsh formats. add diff/apply code to shellapi (moved from shellenv), that is now specific to zsh or bash
* add log packet and new shellstate packets
* switch to shellstate map that's also keyed by shelltype
* add shelltype to remoteinstance
* remove shell argument from waveshell
* added new shelltype statemap to remote.go (msh), deal with fallout
* move shellstate out of init packet, and move to an explicit reinit call. try to initialize all of the active shell states
* change dont always store init state (only store on demand). initialize shell states on demand (if not already initialized). allow reset to change shells
* add shellpref field to remote table. use to drive the default shell choice for new tabs
* show shelltag on cmdinput, pass through ri and remote (defaultshellstate)
* bump mshell version to v0.4
* better version validation for shellstate. also relax compatibility requirements for diffing states (shelltype + major version need to match)
* better error handling, check shellstate compatibility during run (on waveshell server)
* add extra separator for bash shellstate processing to deal with spurious output from rc files
* special migration for v30 -- flag invalid bash shell states and show special button in UI to fix
* format
* remove zsh-decls (unused)
* remove test code
* remove debug print
* fix typo
* init
* client settings view
* add some extra padding and a border below the header
* move settings-field classes under the main class to prevent conflicts
* fix style overrides
* first draft at ui
* first draft connecting openai to cmd info ui
* added more updates and added prompt engineering
* focus textarea on mount
* fix aichat layout issue
* added focus back to input after closing cmd info chat
* added ability to clear chat history, closes on command enter, better initial greeting message, and small things like user can refocus the help textarea by pressing ctrl + space again
* added a bunch of small upgrades
* added context for chatgpt info command
* added context to chatgpt cmd info command
* added ability to use arrow keys to grab code markdown
* added error handling as well as fixed the text area outline bug
* slightly changed the ui for selecting
* revamped ui and added correct scroll behavior
* changed ui, fixed up code block selection, some other small changes
* deep copied cmd info chat when we return
* added error checking and removed logs
* made deep copy code more clear
* prettier with the right version
* more prettier changes
* removed extraneous comment
* init
* diconnected and clientstop modals
* alert and createremoteconn modals
* tabswitcher, view and edit remoteconn modals
* migrate clientstop modal to Modal
* LinkButton
* import styles for createremoteconn modal
* import tabswitcher modal styles
* disable buttons while status is 'connecting'
* minor refactor
* apply changes to viewremoteconn modal from main
* init
* integrate showShellPrompt flag
* renive debugging code
* remove debugging code
* run gofmt. add migration files.
* remove debugging code
* remove migrations and adjust code. show prompt on import ssh configs as well.
* fix show/hide logic
* reset mmap.go
* use resolveBool and utilfn.ContainsStr
* make AlertModal take a generic 'confirmkey' instead of hard coding hideShellPrompt
* rename confirmkey to confirmflag (to be consistent). move confirmflag checking into the alertmodal. short circuit with Promise.resolve(true) if noConfirm checked.
* disable buttons while status is 'connecting'
* minor refactor
The ssh_config library only loaded the config data the first time
certain functions are used. After that, cached values are used instead.
This library has been updated in a fork to add a method that allows the
configuration files to be reloaded. This update takes advantage of that
change so the config files can be updated without restarting waveterm.
* add an alert modal for the sshconfig import button
When the sshconfig import button is pressed, there currently is no
visual indicator of what changed. This adds an alert modal to pop up
only in the case where the gui button is used.
* improve alert modal for sshconfig imports
The previous message for SSH configuration imports was vague and did not
provide detailed information as what happened during the import. This
clarifies that by specifying which remotes were deleted, created, and
updated. Updates are only ran and recorded if they would actually change
something.
* fix port value limiting
The SSH config import port limiting was correct but set off a warning in
linters. It has been updated to do the same behavior in a different way.
Also, port limiting was never added to manually adding a new remote.
This change adds it there as well.
* change user-facing term to connection
Previously, the ssh configuration alert modal used to use the word
"remote" to describe connections. "Remote" is the internal name but it
isn't consistent with what is being displayed to users. So it has been
replaced with "Connection" instead to match.
* change remote to connection for ssh import buttons
Like the previous change, the word "remote" was used instead of
"connection." This was for the tooltips added to connections that had
been imported in the connections menu.
* update one more remote -> connection
* work on cmd-d to delete a selected line
* call stoppropagation when code.tsx captures keyboard input
* finish up with line delete. add a trash icon to line. prevent delete when cmd is running (show error msg)
* remove byte sanitization for user commands
When serializing jsonBytes in packet.go::MarshalPacket, a step existed
that attempted to manually sanitize the bytes before sending them. This
was initially done to avoid invalid characters in json; however, go
should handle this for us. But this sanitization broke
internationalization because it excluded characters required for unicode
in other languages. Because of that, it has been removed.
* properly decode non-ascii on frontend
The functions atob and btoa do not convert base 64 to strings in the
expected way. The base64ToArray function handles it properly but other
cases do not. These other cases have been replaced with a helper
function that makes use of the base64-js package. This package has
already been included as a dependency of another package we use, but it
was added to the package.json file to make the inclusion explicit.
* automatically set/share LANG var with waveshell
Waveterm previously did not set the LANG environment variable which
caused problems for international users. On Linux, this is done
automatically, but it needs to be done manually on macos.
Even on linux, the wavesrv LANG variable is shared with waveshell to
ensure the same one is used on remotes.
* only set the lang var if not previously set
In order to prevent waveterm from overriding the lang var entirely, this
ensures that it is only manually determined if it hasn't previously been
set.
* use envMap instead of os to determine var
This is slightly more performant and relies more directly on our code
instead of external code.
* allow numerical start and allow dots in ssh alias
We previously restricted the ssh alias to start with an
alphabetic character and did not allow dots within it. This caused
problems with users wanting to use an ip address as an alias. This lifts
that restriction so both can freely be used.
Note that while it is common to use the hostname as the alias, hostnames
are not allowed to use the underscore character. However, we do allow
the alias to contain an underscore. I do not think we can remove this
from aliases now but it is something to watch out for in the future.
* allow backslash in username
This involved converting the regexp string into a raw string to able to
use the backslash character. this is important.
* Revert "allow backslash in username"
This reverts commit cafe2812411cfba15b7ece1250a6def29d092366. Upon
reflection, more time is needed to evaluate that this actually corrects
the issue. It will be performed with proper diligence at a later time.
* add port to end of canoncial names when not 22
The canonical name is the identifying key in the database, so it causes
problems if another remote entry has the same canonical name. By adding
the port number to the end of this, it is possible to differentiate the
two.
* add db migrations for adding port to canonicalname
The up migration adds the port to the existing canonical id if it exists
and is not 22. The down migration strips the port off the canonical name
and deletes extra remotes with the same canonical name. If all remotes
with that canonical name have been archived, it keeps the first one
added to the database. If any have not been archived, it keeps the first
added to the database from the non-archived group.
* remove ability to edit port number via ssh import
Previously, ssh imports could edit the port number since it was possible
to change them in the config file without changin the canonical name.
Now that the canonical name contains the port, a change in the port will
simply create a new database entry. For this reason, the ability to
modify the ssh port is dead code and has been removed.
* allow backslash in username
This involved converting the regexp string into a raw string to able to
use the backslash character. this is important.
* simplify up migration logic
The previous up migration was suboptimal because it was accounting for a
corner case not found in production. That case no longer needs to be
considered, so the procedure was simplified.
* improved disconnected modal
* wrap pre with div
* make number of a lines param a constant
* revert app.tsx
* use tail command and capture the output instead
* reset TabSwitcherModal
* fix commands that require quoted paths
Several commands did not wrap the path in quotes which caused problems
when attempting to store the waveterm installation in a place that had a
space in the path. This corrects this in the particular case where the
username does not have spaces but the path to the executable does.
Note: the case of a user name having spaces has not been tested but
likely does not work.
* fix logging problem for wavesrv
A previous fix replaced the getWaveSrvCmd with getWaveSrvPath. This
needs to be getWaveSrvCmd to enable logging.
* fix variable name
* register cmd+p shortcut
* tab switcher modal
* initial implementation
* tab switcher modal content
* fix styles
* fix scroll bugs
* set selected index when clicking option
* hover effect for options
* switch when Enter key is pressed
* remove fuse.js
* only use switchscreen for switching sessions and tabs
* var naming changes
* fix multiple focused options on mouse hover
* fix duplicate focused options and scrollbar
* clean imports
* fix wrong function name
* merge color styles in app.less
* remove debugging code
* use For component when iterating thru options
* minor style fix
* remove mouse interaction, keep focusedIdx in bounds, increase max number of tabs shown, small layout adjustment for big tab names (and more space for icon)
* create migrations for required database change
This is a first attempt that does not appear to be working properly. It
requires review.
* fix errors in db migrations
The previous commit had an extra json call that broke the update and did
not remove the imported interies during a downgrade.
* change migrations to use column instead of json
It makes more sense to associate the source of a config with the remote
type than the sshopts type. This change makes that clear in the database
structure.
* ensure adding a remote manually tags correctly
Using the usual way of adding a remote should result in a sshconfigsrc
of "waveterm-manual". This will be important for filtering out remotes
installed manually and remotes installed via import
* create basic structure for parsing ssh config
This entails creating a new command, making it possible to query only
the imported remotes from the database, and implementing the logic to
handle all of the updates needed.
This needs improvements in a few areas:
- the /etc/ssh/config needs to be parsed as well
- the logic for editing exisiting imported remotes needs to be written
- error handling needs to be improved
- update packet responses need to be provided
* add sshkey support and implement editing
We now search for the ssh identity keyfile and add it if it is found.
Additionally, the logic to edit previously imported ssh hosts has been
added.
* combine hosts from user and system ssh config
We now check both the user ~/.ssh/config as well as the /etc/ssh/config
for hosts. This loops through each file starting with the user one. For
each host, it selects the first pattern without a wildcard and chooses
that to be the alias. If any future hosts are found to have the same
alias, they are skipped. Errors are raised if neither config file can be
opened or no aliases were found.
* improve logging and error reporting
Error reporting is now shortcircuited in cases of individual remotes in
order to allow the other remotes to continue. These errors are now
printed to logs instead.
* allow imports to edit ssh port
Previously, ssh ports could not be edited after the fact. Unfortunately,
this can cause problems since the port can be changed in an ssh config
file. To address this, we allow imports to change the port if a host
with the same canonical name had previously been imported.
* fix response to parse command
* fix error handline for alias parsing
Small mistake of checking for equality instead of inequality
* fix the ability to overwrite hostName with alias
if ssh_config does not find Hostname, it won't output an error. Now we
compare against the result instead of looking for an error.
* fix the error catching for User and Port
This fixes the same problem where parsing the config doesn't give an
error in the case when nothing is found. As before, this checks for a
blank result instead.
* remove unused code
* remove repeated canonical name check
The logic that checks for an existing canonical name already exists in
the AddRemote function, so it is not needed here.
Secondly, we now only allow edits of previously created remotes if they
have not been archived. If they have, the usual logic for creating a new
remote takes precedence.
Lastly, there is no need to archive a remote that has already been
archived so an additional check has been added.
* allow archives to preserve the SSHConfigSrc
* add log message for archiving of imported remotes
* create variables for string variants
Matches existing code style
* add cleanup for opened files
* move migration 25 to migration 26 (already merged a migration 25)
* fix RemoteRuntimeState in ModelUpdate by moving type to sstore.go. Fix some bugs in remote:parse. Fix key/identityfile, return value, and remote editing (should go through msh). remote sudo. add info messages around parse status
* fix issue with archiving the sshconfigsrc
A bug in RemoteType's FromMap caused the loss of sshconfigsrc during the
conversion. This has been corrected and the schema has been updated.
* fix order of archiving removed imported remotes
Previously, if the canonical name changed, the code would try to create
a new remote before archiving the old one. This did not work if the
alias didn't change. Now we archive first and add a new remote after.
* fix ability to change port when importing config
Importing from sshconfig needs to allow the port to change. This was not
happening because of a bug that has been corrected.
* always use host in place of hostname
Since host is the key actually searched for in the ssh config file,
searching for user@hostName may not actually work. To avoid this, we now
always use user@host instead.
* automatically determine ConnectMode
This aims to select a connection mode based off what is provided in the
ssh config file. It aims for auto connections when possible but will
fall back to manual if we can't easily support it
* remove sshkeysource migration number confilict
Previously had conflicting migration numbers of 26. The change not in
the main branch has been moved to 27 to remove the conflict.
* move sshkeysource migration to migration 28
* add WaveOptions flag parsing for ssh config
This is currently being used to allow users to force manual connect mode
if desired. It will also be used to force skipping options in the future
but that is not complete in this commit.
* implement ignore flag for ssh config parsing
The ignore flag will now archive an imported remote if it previously
existed and not create a new remote in its place.
* fix discovery of identity file
Previously, a ~ in the identity file's path was not expanded to the home
dir. Because of this, files with a ~ were previously identified as
invalid files. By expanding it during the search, this is no longer the
case.
* disable frontend edit button for imported remotes
Imported Remotes should not be editable in waveterm by users. This edit
makes it clear that the button will not work for those cases. Further
edits may be needed to explain why it doesn't work and what to do
instead.
* add backend rejection of updating imported remote
As before, we don't want manual editing of an imported remote inside the
app. This ensures that it can't happen on the backend.
* create tooltips for sshconfig edit/delete buttons
For remotes that are imported, edits are not allowed. This adds a
tooltip that explains what to do instead.
Deleting remotes that are imported is allowed, but they will come back
if the user imports again. The tooltip explains a way to avoid this.
* add logo after name for imported remotes
In the connections screen, there previously was not a way to tell
imported connections from manually created connections. This change adds
a logo after the imported ones to differentiate them.
* small formatting updates
* add import tooltip to connection modal
Added the logo for an imported config to the connection modal. It also
provides a short description when it the mouse hovers over it.
* add button to import ssh config
Make the command into a button for a simple gui interface.
Also ran prettier to clean up some syntax.
* remove strict casing on WaveOptions
WaveOptions was previously very specific about the casing of the ignore
and connectmode subcommands. With this update, the casing is
automatically converted to lowercase and can be ignored.
* add status dot before name in connections screen
* add space and tooltip to connection imported icon
* re-prettier
* sync schema.sql with running schema
* remove incognito field from history table. also don't add empty FeState vars
* history updates, add festate, durationms, exitcode, status, and tags into history table
* update screen/session delete, and clear to no longer purge history items. move deleted screens/sessions into a tombstone table.
* update schema
* fix alias -> fn
* quiet the security warning about an unchecked byte conversion. no real security issue here, but add a range check for good measure.
* working on an in-memory store for screen information
* nostrpos sentinel
* textareainput now tracks selection (to update backend)
* make websocket connections much safer. add a defer/panic handler for each ws message handled on backend. don't allow client to reconnect to backend ws handler more than once per second (handles issue with lots of fast fails)
* use onSelect to have frontend textarea sync state to backend ScreenMem store
* restore cmdline when switching screens
* prettier
* Add script to generate license disclaimers for all dependencies
* update readme
* Upload current acknowledgements
* Add acknowledgements link to about, remove unnecessary width setting
* revert gitignore
* update readme wording
* i was wrong, we can output for both backend mods at the same time
* update wording
* remove license button in about modal (replaced with acknowledgements)
* inital implementation
* cleanup
* ui jump fix
* fix wrong first tab top right border radius
* add comment
* remove react.fragment. only do initial screens populate on componentDidMount, rename this.scrollIntoViewTimeout (add Id to distinguish from state.scrollIntoViewTimeout).
* clean up some imports
* use single tabRef
* Fix unvalidated path warning in cirfile.go
* Adding test
* move dir path vars into global scope, set wave home in test if not set already
* separate validation code into own testable func
* do removal of cir file in cleanup
* rename test file names
* flock should return err if waiting without done fn
* update comment
* use timeout context
* remove redundant validation
* add more error messages
* use filepath.join instead
* validate when creating cirfile too
* support .ptyout.cf, etc.
* remove validation as cirfile is "trusted", since it only accepts pre-validated input
* revert to passing nil context for flock in the Create file case
# Use only 'java-kotlin' to analyze code written in Java, Kotlin or both
# Use only 'javascript-typescript' to analyze code written in JavaScript, TypeScript or both
# Learn more about CodeQL language support at https://aka.ms/codeql-docs/language-support
steps:
- name:Checkout repository
uses:actions/checkout@v3
steps:
- name:Checkout repository
uses:actions/checkout@v4
# Initializes the CodeQL tools for scanning.
- name:Initialize CodeQL
uses:github/codeql-action/init@v2
with:
languages:${{ matrix.language }}
# If you wish to specify custom queries, you can do so here or in a config file.
# By default, queries listed here will override any specified in a config file.
# Prefix the list here with "+" to use these queries and those in the config file.
- name:Checkout Scripthaus (Go only)
if:matrix.language == 'go'
uses:actions/checkout@v4
with:
repository:scripthaus-dev/scripthaus
path:scripthaus
# For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
# queries: security-extended,security-and-quality
- name:Setup Go (Go only)
uses:actions/setup-go@v5
if:matrix.language == 'go'
with:
go-version:stable
cache-dependency-path:|
wavesrv/go.sum
waveshell/go.sum
scripthaus/go.sum
- name:Install Scripthaus (Go only)
if:matrix.language == 'go'
run:|
go work use ./scripthaus;
cd scripthaus;
go get ./...;
CGO_ENABLED=1 go build -o scripthaus cmd/main.go
echo $PWD >> $GITHUB_PATH
# Autobuild attempts to build any compiled languages (C/C++, C#, Go, Java, or Swift).
# If this step fails, then you should remove it and run the build manually (see below)
- name:Autobuild
uses:github/codeql-action/autobuild@v2
# Initializes the CodeQL tools for scanning.
- name:Initialize CodeQL
uses:github/codeql-action/init@v3
with:
languages:${{ matrix.language }}
# If you wish to specify custom queries, you can do so here or in a config file.
# By default, queries listed here will override any specified in a config file.
# Prefix the list here with "+" to use these queries and those in the config file.
# ℹ️ Command-line programs to run using the OS shell.
# đź“š See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
# For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
# queries: security-extended,security-and-quality
# If the Autobuild fails above, remove it and uncomment the following three lines.
# modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance.
# Autobuild attempts to build any compiled languages (C/C++, C#, Go, Java, or Swift).
# If this step fails, then you should remove it and run the build manually (see below)
- name:Autobuild (not Go)
if:matrix.language != 'go'
uses:github/codeql-action/autobuild@v3
# - run: |
# echo "Run, Build Application using script"
# ./location_of_script_within_repo/buildscript.sh
- name:Build (Go only)
if:matrix.language == 'go'
run:scripthaus run build-backend
- name:Perform CodeQL Analysis
uses:github/codeql-action/analyze@v2
with:
category:"/language:${{matrix.language}}"
# ℹ️ Command-line programs to run using the OS shell.
# đź“š See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
# If the Autobuild fails above, remove it and uncomment the following three lines.
# modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance.
These instructions are for setting up the build on MacOS.
These instructions are for setting up the build on MacOS.
If you're developing on Linux please use the [Linux Build Instructions](./build-linux.md).
## Running the Development Version of Wave
If you install the production version of Wave, you'll see a semi-transparent sidebar, and the data for Wave is stored in the directory ~/.waveterm. The development version has a blue sidebar and stores its data in ~/.waveterm-dev. This allows the production and development versions to be run simultaneously with no conflicts. If the dev database is corrupted by development bugs, or the schema changes in development it will not affect the production copy.
If you install the production version of Wave, you'll see a semi-transparent gray sidebar, and the data for Wave is stored in the directory ~/.waveterm. The development version has a blue sidebar and stores its data in ~/.waveterm-dev. This allows the production and development versions to be run simultaneously with no conflicts. If the dev database is corrupted by development bugs, or the schema changes in development it will not affect the production copy.
## Prereqs and Tools
Download and install Go (must be at least go 1.18):
```
```sh
brew install go
```
Download and install ScriptHaus (to run the build commands):
```
```sh
brew tap scripthaus-dev/scripthaus
brew install scripthaus
```
You also need a relatively modern nodejs with npm and yarn installed.
* Node can be installed from [https://nodejs.org](https://nodejs.org).
* npm can install yarn using:
```
npm install -g yarn
- Node can be installed from [https://nodejs.org](https://nodejs.org).
- npm can install yarn using:
```sh
corepack enable
yarn install
```
## Clone the Repo
```
```sh
git clone git@github.com:wavetermdev/waveterm.git
```
## Building WaveShell / WaveSrv
```
```sh
scripthaus run build-backend
```
This builds the Golang backends for Wave. The binaries will put in waveshell/bin and wavesrv/bin respectively. If you're working on a new plugin or other pure frontend changes to Wave, you won't need to rebuild these unless you pull new code from the Wave Repository.
This builds the Golang backends for Wave. The binaries will put in waveshell/bin and wavesrv/bin respectively. If you're working on a new plugin or other pure frontend changes to Wave, you won't need to rebuild these unless you pull new code from the Wave Repository.
## One-Time Setup
Install modules (we use yarn):
```
```sh
yarn
```
Electron also requires specific builds of node_modules to work (because Electron embeds a specific node.js version that might not match your development node.js version). We use a special electron command to cross-compile those modules:
```
scripthaus run electron-rebuild
```
## Running WebPack
We use webpack to build both the React and Electron App Wrapper code. They are both run together using:
We use webpack to build both the React and Electron App Wrapper code. They are both run together using:
```
```sh
scripthaus run webpack-watch
```
## Running the WaveTerm Dev Client
Now that webpack is running (and watching for file changes) we can finally run the WaveTerm Dev Client! To start the client run:
```
Now that webpack is running (and watching for file changes) we can finally run the WaveTerm Dev Client! To start the client run:
```sh
scripthaus run electron
```
To kill the client, either exit the Electron App normally or just Ctrl-C the ```scripthaus run electron``` command.
To kill the client, either exit the Electron App normally or just Ctrl-C the `scripthaus run electron` command.
Because we're running webpack in watch mode, any changes you make to the typescript will be automatically picked up by the client after a refresh. Note that I've disabled hot-reloading in the webpack config, so to pick up new changes you'll have to manually refresh the WaveTerm Client window. To do that use "Command-Shift-R" (Command-R is used internally by WaveTerm and will not force a refresh).
Because we're running webpack in watch mode, any changes you make to the typescript will be automatically picked up by the client after a refresh. Note that I've disabled hot-reloading in the webpack config, so to pick up new changes you'll have to manually refresh the WaveTerm Client window. To do that use "Option-R" (Command-R is used internally by WaveTerm and will not force a refresh).
## Debugging the Dev Client
You can use the regular Chrome DevTools to debug the frontend application. You can open the DevTools using the keyboard shortcut `Cmd-Option-I`.
You can use the regular Chrome DevTools to debug the frontend application. You can open the DevTools using the keyboard shortcut `Cmd-Option-I`.
Wave isn't just another terminal emulator; it's a rethink on how terminals are built. Wave combines command line with the power of the open web to help veteran CLI users and new developers alike.
Wave is an open-source AI-native terminal built for seamless workflows.
* Inline renderers to cut down on context switching. Render code, images, markdown, and CSV files without ever leaving the terminal.
* Persistent sessions that can restore state across network disconnections and reboots
* Searchable contextual command history across all remote sessions (saved locally)
* Workspaces, tabs, and command blocks to keep you organized
Wave isn't just another terminal emulator; it's a rethink on how terminals are built. Wave combines command line with the power of the open web to help veteran CLI users and new developers alike.
- Inline renderers to cut down on context switching. Render code, images, markdown, and CSV files without ever leaving the terminal.
- Persistent sessions that can restore state across network disconnections and reboots
- Searchable contextual command history across all remote sessions (saved locally)
- Workspaces, tabs, and command blocks to keep you organized
- CodeEdit, to edit local and remote files with a VSCode-like inline editor
- AI Integration with ChatGPT (or ChatGPT compatible APIs) to help write commands and get answers inline
We make use of many amazing open-source projects to build Wave Terminal. We automatically generate license reports via FOSSA to comply with the license distribution requirements of our dependencies. Below is a summary of the licenses used by our product. Clicking on the image will take you to the full report on FOSSA's website.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Evan Simkowitz
Mike Sawka
Cole Lashley
Ian Jennings
Sylvie Crowe
Red J Adaya
Yiheng Li
Mikael Eklund
dependabot[bot]
Knox Lively
june
Sylvia Crowe
