For egress packets, __cgroup_bpf_fun_filter_skb() will now call
BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() instead of PROG_CGROUP_RUN_ARRAY()
in order to propagate congestion notifications (cn) requests to TCP
callers.
For egress packets, this function can return:
NET_XMIT_SUCCESS (0) - continue with packet output
NET_XMIT_DROP (1) - drop packet and notify TCP to call cwr
NET_XMIT_CN (2) - continue with packet output and notify TCP
to call cwr
-EPERM - drop packet
For ingress packets, this function will return -EPERM if any attached
program was found and if it returned != 1 during execution. Otherwise 0
is returned.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allows cgroup inet skb programs to return values in the range [0, 3].
The second bit is used to deterine if congestion occurred and higher
level protocol should decrease rate. E.g. TCP would call tcp_enter_cwr()
The bpf_prog must set expected_attach_type to BPF_CGROUP_INET_EGRESS
at load time if it uses the new return values (i.e. 2 or 3).
The expected_attach_type is currently not enforced for
BPF_PROG_TYPE_CGROUP_SKB. e.g Meaning the current bpf_prog with
expected_attach_type setting to BPF_CGROUP_INET_EGRESS can attach to
BPF_CGROUP_INET_INGRESS. Blindly enforcing expected_attach_type will
break backward compatibility.
This patch adds a enforce_expected_attach_type bit to only
enforce the expected_attach_type when it uses the new
return value.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Create new macro BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() to be used by
__cgroup_bpf_run_filter_skb for EGRESS BPF progs so BPF programs can
request cwr for TCP packets.
Current cgroup skb programs can only return 0 or 1 (0 to drop the
packet. This macro changes the behavior so the low order bit
indicates whether the packet should be dropped (0) or not (1)
and the next bit is used for congestion notification (cn).
Hence, new allowed return values of CGROUP EGRESS BPF programs are:
0: drop packet
1: keep packet
2: drop packet and call cwr
3: keep packet and call cwr
This macro then converts it to one of NET_XMIT values or -EPERM
that has the effect of dropping the packet with no cn.
0: NET_XMIT_SUCCESS skb should be transmitted (no cn)
1: NET_XMIT_DROP skb should be dropped and cwr called
2: NET_XMIT_CN skb should be transmitted and cwr called
3: -EPERM skb should be dropped (no cn)
Note that when more than one BPF program is called, the packet is
dropped if at least one of programs requests it be dropped, and
there is cn if at least one program returns cn.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are a bunch of lines of code or comments that are unnecessary
wrapped into multi-lines. Fix that without violating any code
guidelines.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Extra check for type is unnecessary in first case.
Extra zeroing is unnecessary, as snprintf guarantees that it will
zero-terminate string.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
0 is a valid FD, so it's better to initialize it to -1, as is done in
other places. Also, technically, BTF type ID 0 is valid (it's a VOID
type), so it's more reliable to check btf_fd, instead of
btf_key_type_id, to determine if there is any BTF associated with a map.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Validate there was no error retrieving symbol name corresponding to
a BPF map.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rewrite endianness check to use "more canonical" way, using
compiler-defined macros, similar to few other places in libbpf. It also
is more obvious and shorter.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
pr_warning ultimately may call into user-provided callback function,
which can clobber errno value, so we need to save it before that.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ensure that size of a section w/ BPF instruction is exactly a multiple
of BPF instruction size.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are two functions in libbpf that support passing a log_level
parameter for the verifier for loading programs:
bpf_object__load_xattr() and bpf_prog_load_xattr(). Both accept an
attribute object containing the log_level, and apply it to the programs
to load.
It turns out that to effectively load the programs, the latter function
eventually relies on the former. This was not taken into account when
adding support for log_level in bpf_object__load_xattr(), and the
log_level passed to bpf_prog_load_xattr() later gets overwritten with a
zero value, thus disabling verifier logs for the program in all cases:
bpf_prog_load_xattr() // prog->log_level = attr1->log_level;
-> bpf_object__load() // attr2->log_level = 0;
-> bpf_object__load_xattr() // <pass prog and attr2>
-> bpf_object__load_progs() // prog->log_level = attr2->log_level;
Fix this by OR-ing the log_level in bpf_object__load_progs(), instead of
overwriting it.
v2: Fix commit log description (confusion on function names in v1).
Fixes: 60276f9849 ("libbpf: add bpf_object__load_xattr() API function to pass log_level")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Now that we don't have __rcu markers on the bpf_prog_array helpers,
let's use proper rcu_dereference_protected to obtain array pointer
under mutex.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Now that we don't have __rcu markers on the bpf_prog_array helpers,
let's use proper rcu_dereference_protected to obtain array pointer
under mutex.
We also don't need __rcu annotations on cgroup_bpf.inactive since
it's not read/updated concurrently.
v4:
* drop cgroup_rcu_xyz wrappers and use rcu APIs directly; presumably
should be more clear to understand which mutex/refcount protects
each particular place
v3:
* amend cgroup_rcu_dereference to include percpu_ref_is_dying;
cgroup_bpf is now reference counted and we don't hold cgroup_mutex
anymore in cgroup_bpf_release
v2:
* replace xchg with rcu_swap_protected
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Drop __rcu annotations and rcu read sections from bpf_prog_array
helper functions. They are not needed since all existing callers
call those helpers from the rcu update side while holding a mutex.
This guarantees that use-after-free could not happen.
In the next patches I'll fix the callers with missing
rcu_dereference_protected to make sparse/lockdep happy, the proper
way to use these helpers is:
struct bpf_prog_array __rcu *progs = ...;
struct bpf_prog_array *p;
mutex_lock(&mtx);
p = rcu_dereference_protected(progs, lockdep_is_held(&mtx));
bpf_prog_array_length(p);
bpf_prog_array_copy_to_user(p, ...);
bpf_prog_array_delete_safe(p, ...);
bpf_prog_array_copy_info(p, ...);
bpf_prog_array_copy(p, ...);
bpf_prog_array_free(p);
mutex_unlock(&mtx);
No functional changes! rcu_dereference_protected with lockdep_is_held
should catch any cases where we update prog array without a mutex
(I've looked at existing call sites and I think we hold a mutex
everywhere).
Motivation is to fix sparse warnings:
kernel/bpf/core.c:1803:9: warning: incorrect type in argument 1 (different address spaces)
kernel/bpf/core.c:1803:9: expected struct callback_head *head
kernel/bpf/core.c:1803:9: got struct callback_head [noderef] <asn:4> *
kernel/bpf/core.c:1877:44: warning: incorrect type in initializer (different address spaces)
kernel/bpf/core.c:1877:44: expected struct bpf_prog_array_item *item
kernel/bpf/core.c:1877:44: got struct bpf_prog_array_item [noderef] <asn:4> *
kernel/bpf/core.c:1901:26: warning: incorrect type in assignment (different address spaces)
kernel/bpf/core.c:1901:26: expected struct bpf_prog_array_item *existing
kernel/bpf/core.c:1901:26: got struct bpf_prog_array_item [noderef] <asn:4> *
kernel/bpf/core.c:1935:26: warning: incorrect type in assignment (different address spaces)
kernel/bpf/core.c:1935:26: expected struct bpf_prog_array_item *[assigned] existing
kernel/bpf/core.c:1935:26: got struct bpf_prog_array_item [noderef] <asn:4> *
v2:
* remove comment about potential race; that can't happen
because all callers are in rcu-update section
Cc: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When building the tools/testing/selftest/bpf subdirectory,
(running both a local directory "make" and a
"make -C tools/testing/selftests/bpf") I keep hitting the
following compilation error:
prog_tests/flow_dissector.c: In function ‘create_tap’:
prog_tests/flow_dissector.c:150:38: error: ‘IFF_NAPI’ undeclared (first
use in this function)
.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_NAPI | IFF_NAPI_FRAGS,
^
prog_tests/flow_dissector.c:150:38: note: each undeclared identifier is
reported only once for each function it appears in
prog_tests/flow_dissector.c:150:49: error: ‘IFF_NAPI_FRAGS’ undeclared
Adding include/uapi/linux/if_tun.h to tools/include/uapi/linux
resolves the problem and ensures the compilation of the file
does not depend on having up-to-date kernel headers locally.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Roman Gushchin says:
====================
This patchset implements a cgroup bpf auto-detachment functionality:
bpf programs are detached as soon as possible after removal of the
cgroup, without waiting for the release of all associated resources.
Patches 2 and 3 are required to implement a corresponding kselftest
in patch 4.
v5:
1) rebase
v4:
1) release cgroup bpf data using a workqueue
2) add test_cgroup_attach to .gitignore
v3:
1) some minor changes and typo fixes
v2:
1) removed a bogus check in patch 4
2) moved buf[len] = 0 in patch 2
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a kselftest to cover bpf auto-detachment functionality.
The test creates a cgroup, associates some resources with it,
attaches a couple of bpf programs and deletes the cgroup.
Then it checks that bpf programs are going away in 5 seconds.
Expected output:
$ ./test_cgroup_attach
#override:PASS
#multi:PASS
#autodetach:PASS
test_cgroup_attach:PASS
On a kernel without auto-detaching:
$ ./test_cgroup_attach
#override:PASS
#multi:PASS
#autodetach:FAIL
test_cgroup_attach:FAIL
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enable all available cgroup v2 controllers when setting up
the environment for the bpf kselftests. It's required to properly test
the bpf prog auto-detach feature. Also it will generally increase
the code coverage.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert test_cgrp2_attach2 example into a proper test_cgroup_attach
kselftest. It's better because we do run kselftest on a constant
basis, so there are better chances to spot a potential regression.
Also make it slightly less verbose to conform kselftests output style.
Output example:
$ ./test_cgroup_attach
#override:PASS
#multi:PASS
test_cgroup_attach:PASS
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the lifetime of bpf programs attached to a cgroup is bound
to the lifetime of the cgroup itself. It means that if a user
forgets (or intentionally avoids) to detach a bpf program before
removing the cgroup, it will stay attached up to the release of the
cgroup. Since the cgroup can stay in the dying state (the state
between being rmdir()'ed and being released) for a very long time, it
leads to a waste of memory. Also, it blocks a possibility to implement
the memcg-based memory accounting for bpf objects, because a circular
reference dependency will occur. Charged memory pages are pinning the
corresponding memory cgroup, and if the memory cgroup is pinning
the attached bpf program, nothing will be ever released.
A dying cgroup can not contain any processes, so the only chance for
an attached bpf program to be executed is a live socket associated
with the cgroup. So in order to release all bpf data early, let's
count associated sockets using a new percpu refcounter. On cgroup
removal the counter is transitioned to the atomic mode, and as soon
as it reaches 0, all bpf programs are detached.
Because cgroup_bpf_release() can block, it can't be called from
the percpu ref counter callback directly, so instead an asynchronous
work is scheduled.
The reference counter is not socket specific, and can be used for any
other types of programs, which can be executed from a cgroup-bpf hook
outside of the process context, had such a need arise in the future.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: jolsa@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit fixes a few style problems in samples/bpf/bpf_load.c:
- Magic string use of 'DEBUGFS'
- Useless zero initialization of a global variable
- Minor style fix with whitespace
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Right now test_tunnel.sh always exits with success even if some
of the subtests fail. Since the output is very verbose, it's
hard to spot the issues with subtests. Let's fail the script
if any subtest fails.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
brakmo
Andrii Nakryiko
Quentin Monnet
Stanislav Fomichev
Alan Maguire
Alexei Starovoitov
Roman Gushchin
Daniel T. Lee