Before this change, function load_sk_storage_btf expected that
libbpf__probe_raw_btf was returning a BTF descriptor, but in fact it was
returning an information about whether the probe was successful (0 or
1). load_sk_storage_btf was using that value as an argument of the close
function, which was resulting in closing stdout and thus terminating the
process which called that function.
That bug was visible in bpftool. `bpftool feature` subcommand was always
exiting too early (because of closed stdout) and it didn't display all
requested probes. `bpftool -j feature` or `bpftool -p feature` were not
returning a valid json object.
This change renames the libbpf__probe_raw_btf function to
libbpf__load_raw_btf, which now returns a BTF descriptor, as expected in
load_sk_storage_btf.
v2:
- Fix typo in the commit message.
v3:
- Simplify BTF descriptor handling in bpf_object__probe_btf_* functions.
- Rename libbpf__probe_raw_btf function to libbpf__load_raw_btf and
return a BTF descriptor.
v4:
- Fix typo in the commit message.
Fixes: d7c4b3980c ("libbpf: detect supported kernel BTF features and sanitize BTF")
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add missing header file following compiler warning:
prog_tests/flow_dissector.c: In function ‘tx_tap’:
prog_tests/flow_dissector.c:175:9: warning: implicit declaration of function ‘writev’; did you mean ‘write’? [-Wimplicit-function-declaration]
return writev(fd, iov, ARRAY_SIZE(iov));
^~~~~~
write
Fixes: 0905beec9f ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jiong Wang says:
====================
JIT back-ends need to guarantee high 32-bit cleared whenever one eBPF insn
write low 32-bit sub-register only. It is possible that some JIT back-ends
have failed doing this and are silently generating wrong image.
This set completes the unit tests, so bug on this could be exposed in JITs.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
eBPF ISA specification requires high 32-bit cleared when only low 32-bit
sub-register is written. JIT back-ends must guarantee this semantics when
doing code-gen.
This patch complete unit tests for all of those insns that could be visible
to JIT back-ends and defining sub-registers, if JIT back-ends failed to
guarantee the mentioned semantics, these unit tests will fail.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It is better to centralize all sub-register zero extension checks into an
independent file.
This patch takes the first step to move existing sub-register zero
extension checks into subreg.c.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Backlog work for psock (sk_psock_backlog) might sleep while waiting
for memory to free up when sending packets. However, while sleeping
the socket may be closed and removed from the map by the user space
side.
This breaks an assumption in sk_stream_wait_memory, which expects the
wait queue to be still there when it wakes up resulting in a
use-after-free shown below. To fix his mark sendmsg as MSG_DONTWAIT
to avoid the sleep altogether. We already set the flag for the
sendpage case but we missed the case were sendmsg is used.
Sockmap is currently the only user of skb_send_sock_locked() so only
the sockmap paths should be impacted.
==================================================================
BUG: KASAN: use-after-free in remove_wait_queue+0x31/0x70
Write of size 8 at addr ffff888069a0c4e8 by task kworker/0:2/110
CPU: 0 PID: 110 Comm: kworker/0:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3d4fe-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
print_address_description+0x6e/0x2b0
? remove_wait_queue+0x31/0x70
kasan_report+0xfd/0x177
? remove_wait_queue+0x31/0x70
? remove_wait_queue+0x31/0x70
remove_wait_queue+0x31/0x70
sk_stream_wait_memory+0x4dd/0x5f0
? sk_stream_wait_close+0x1b0/0x1b0
? wait_woken+0xc0/0xc0
? tcp_current_mss+0xc5/0x110
tcp_sendmsg_locked+0x634/0x15d0
? tcp_set_state+0x2e0/0x2e0
? __kasan_slab_free+0x1d1/0x230
? kmem_cache_free+0x70/0x140
? sk_psock_backlog+0x40c/0x4b0
? process_one_work+0x40b/0x660
? worker_thread+0x82/0x680
? kthread+0x1b9/0x1e0
? ret_from_fork+0x1f/0x30
? check_preempt_curr+0xaf/0x130
? iov_iter_kvec+0x5f/0x70
? kernel_sendmsg_locked+0xa0/0xe0
skb_send_sock_locked+0x273/0x3c0
? skb_splice_bits+0x180/0x180
? start_thread+0xe0/0xe0
? update_min_vruntime.constprop.27+0x88/0xc0
sk_psock_backlog+0xb3/0x4b0
? strscpy+0xbf/0x1e0
process_one_work+0x40b/0x660
worker_thread+0x82/0x680
? process_one_work+0x660/0x660
kthread+0x1b9/0x1e0
? __kthread_create_on_node+0x250/0x250
ret_from_fork+0x1f/0x30
Fixes: 20bf50de30 ("skbuff: Function to send an skbuf on a socket")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add three tests to test_verifier/basic_instr that make sure that the
high 32-bits of the destination register is cleared after an ALU32
and/or/xor.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When using 32-bit subregisters (ALU32), the RISC-V JIT would not clear
the high 32-bits of the target register and therefore generate
incorrect code.
E.g., in the following code:
$ cat test.c
unsigned int f(unsigned long long a,
unsigned int b)
{
return (unsigned int)a & b;
}
$ clang-9 -target bpf -O2 -emit-llvm -S test.c -o - | \
llc-9 -mattr=+alu32 -mcpu=v3
.text
.file "test.c"
.globl f
.p2align 3
.type f,@function
f:
r0 = r1
w0 &= w2
exit
.Lfunc_end0:
.size f, .Lfunc_end0-f
The JIT would not clear the high 32-bits of r0 after the
and-operation, which in this case might give an incorrect return
value.
After this patch, that is not the case, and the upper 32-bits are
cleared.
Reported-by: Jiong Wang <jiong.wang@netronome.com>
Fixes: 2353ecc6f9 ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
GCC 9 fails to calculate the size of local constant strings and produces a
false positive:
samples/bpf/task_fd_query_user.c: In function ‘test_debug_fs_uprobe’:
samples/bpf/task_fd_query_user.c:242:67: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 215 [-Wformat-truncation=]
242 | snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id",
| ^~
243 | event_type, event_alias);
| ~~~~~~~~~~~
samples/bpf/task_fd_query_user.c:242:2: note: ‘snprintf’ output between 45 and 300 bytes into a destination of size 256
242 | snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
243 | event_type, event_alias);
| ~~~~~~~~~~~~~~~~~~~~~~~~
Workaround this by lowering the buffer size to a reasonable value.
Related GCC Bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83431
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If the trace for read is larger than 4096, the return
value sz will be 4096. This results in off-by-one error
on buf:
static char buf[4096];
ssize_t sz;
sz = read(trace_fd, buf, sizeof(buf));
if (sz > 0) {
buf[sz] = 0;
puts(buf);
}
Signed-off-by: Chang-Hsien Tsai <luke.tw@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The BPF_FUNC_sk_lookup_xxx helpers return RET_PTR_TO_SOCKET_OR_NULL.
Meaning a fullsock ptr and its fullsock's fields in bpf_sock can be
accessed, e.g. type, protocol, mark and priority.
Some new helper, like bpf_sk_storage_get(), also expects
ARG_PTR_TO_SOCKET is a fullsock.
bpf_sk_lookup() currently calls sk_to_full_sk() before returning.
However, the ptr returned from sk_to_full_sk() is not guaranteed
to be a fullsock. For example, it cannot get a fullsock if sk
is in TCP_TIME_WAIT.
This patch checks for sk_fullsock() before returning. If it is not
a fullsock, sock_gen_put() is called if needed and then returns NULL.
Fixes: 6acc9b432e ("bpf: Add helper to retrieve socket in BPF")
Cc: Joe Stringer <joe@isovalent.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Joe Stringer <joe@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
__bpf_skc_lookup takes a socket tuple and the length of the
tuple as an argument. Based on the length, it decides which
address family to pass to the helper function sk_lookup.
In case of AF_INET6, it fails to verify that the length
of the tuple is long enough. sk_lookup may therefore access
data past the end of the tuple.
Fixes: 6acc9b432e ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix Sphinx warnings in Documentation/networking/af_xdp.rst by
adding indentation:
Documentation/networking/af_xdp.rst:319: WARNING: Literal block expected; none found.
Documentation/networking/af_xdp.rst:326: WARNING: Literal block expected; none found.
Fixes: 0f4a9b7d4e ("xsk: add FAQ to facilitate for first time users")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and
stmmac_init_tx_chan(). This is because if PBLx8 is to be used,
"DMA_CH(#i)_Control.PBLx8" needs to be set before programming
"DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL".
Fixes: 47f2a9ce52 ("net: stmmac: dma channel init prepared for multiple queues")
Reviewed-by: Zhang, Baoli <baoli.zhang@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Weifeng Voon <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently ethtool was not able to get/set the flow control due to a
missing "!". It will always return -EOPNOTSUPP even the device is
flow control supported.
This patch fixes the condition check for ethtool flow control get/set
function for ETHTOOL_LINK_MODE_Asym_Pause_BIT.
Fixes: 3c1bcc8614 (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”)
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
QRTR packets has a message type in the header, which is repeated in the
control header. For control packets we therefor copy the type from
beginning of the outgoing payload and use that as message type.
For non-control messages an endianness fix introduced in v5.2-rc1 caused the
type to be 0, rather than QRTR_TYPE_DATA, causing all messages to be dropped by
the receiver. Fix this by converting and using qrtr_type, which will remain
QRTR_TYPE_DATA for non-control messages.
Fixes: 8f5e24514c ("net: qrtr: use protocol endiannes variable")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ever since commit 3a06c7ac24 ("posix-clocks: Remove interval timer
facility and mmap/fasync callbacks") the possibility of PHC based
posix timers has been removed. In addition it will probably never
make sense to implement this functionality.
This patch removes the misleading example code which seems to suggest
that posix timers for PHC devices will ever be a thing.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu says:
====================
kselftests: fib_rule_tests: fix "from $SRC_IP iif $DEV" match testing
As all the IPv4 testing addresses are in the same subnet and egress device ==
ingress device, to pass "from $SRC_IP iif $DEV" match test, we need enable
forwarding to get the route entry.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As all the testing addresses are in the same subnet and egress device ==
ingress device. We need enable forwarding to get the route entry.
Also disable rp_filer separately as some distributions enable it in
startup scripts.
Fixes: 65b2b4939a ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IPv4 testing address are all in 192.51.100.0 subnet. It doesn't make
sense to set a 198.51.100.1 local address. Should be a typo.
Fixes: 65b2b4939a ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLV_SET is called with a data pointer and a len parameter that tells us
how many bytes are pointed to by data. When invoking memcpy() we need
to careful to only copy len bytes.
Previously we would copy TLV_LENGTH(len) bytes which would copy an extra
4 bytes past the end of the data pointer which newer GCC versions
complain about.
In file included from test.c:17:
In function 'TLV_SET',
inlined from 'test' at test.c:186:5:
/usr/include/linux/tipc_config.h:317:3:
warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32]
of object 'bearer_name' with type 'char[32]' [-Warray-bounds]
memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
test.c: In function 'test':
test.c::161:10: note:
'bearer_name' declared here
char bearer_name[TIPC_MAX_BEARER_NAME];
^~~~~~~~~~~
We still want to ensure any padding bytes at the end are initialised, do
this with a explicit memset() rather than copy bytes past the end of
data. Apply the same logic to TCM_SET.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benedikt Spranger says:
====================
Convert mdio wait function to use readx_poll_timeout()
On loaded systems with a preemptible kernel both functions
axienet_mdio_wait_until_ready() and xemaclite_mdio_wait() may report a
false positive error return.
Convert both functions to use readx_poll_timeout() to handle the
situation in a safe manner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Rostecki
Alakesh Haloi
Daniel Borkmann
Jiong Wang
John Fastabend
Jakub Sitnicki
Björn Töpel
Matteo Croce
Chang-Hsien Tsai
Martin KaFai Lau
Lorenz Bauer
Randy Dunlap
Weifeng Voon
Tan, Tee Min
Bjorn Andersson
Weitao Hou
Richard Cochran
David S. Miller
Hangbin Liu
Chris Packham