Commit Graph

1059958 Commits

Author SHA1 Message Date
Magnus Damm 712fe4c849 serial: sh-sci: Remove BREAK/FRAME/PARITY/OVERRUN printouts
Update the SCIF serial driver to remove printouts for break, frame, parity
and overrun errors. This reduces the amount of console printouts generated
by the defconfig kernel on R-Car Gen3 for certain use cases. To retrieve
more information about such errors the user may inspect counters. Also these
errors are fed into the TTY layer for further application specific handling.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Link: https://lore.kernel.org/r/163884254093.18109.2982470198301927679.sendpatchset@octo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:55:56 +01:00
Andy Shevchenko 46dacba8fe serial: 8250_pericom: Use serial_dl_write() instead of open coded
It's better to stick with standard API to write and read DL value
when the hardware is compatible with it. In case any quirks are
needed it may be easily added in one place rather than modifying
code here and there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122133512.8947-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:55:22 +01:00
Jay Dolan b4ccaf5aa2 serial: 8250_pericom: Re-enable higher baud rates
Add UPF_MAGIC_MULTIPLIER to the port flags since there is now
range checking in serial8250_get_baud_rate() in 8250_port.c.

Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122133512.8947-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:55:22 +01:00
Andy Shevchenko fcfd3c09f4 serial: 8250_pci: Split out Pericom driver
Pericom along with Acces I/O support consumes a lot of LOCs in 8250_pci.c.
For the sake of easier maintenance, split it to a separate driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122133512.8947-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:55:22 +01:00
Sam Protsenko 8cf8d3c4a6 tty: serial: samsung: Fix console registration from module
On modern Exynos SoCs (like Exynos850) the UART can be implemented as a
part of USI IP-core. In such case, USI driver is used to initialize USI
registers, and it also calls of_platform_populate() to instantiate all
sub-nodes (e.g. serial node) of USI node. When serial driver is
built-in, but USI driver is a module, and CONFIG_SERIAL_SAMSUNG_CONSOLE
is enabled, next call chain will happen when loading USI module from
user space:

    usi_init
      v
    usi_probe
      v
    of_platform_populate
      v
    s3c24xx_serial_probe
      v
    uart_add_one_port
      v
    uart_configure_port
      v
    register_console
      v
    try_enable_new_console
      v
    s3c24xx_serial_console_setup

But because the serial driver is built-in, and
s3c24xx_serial_console_setup() is marked with __init keyword, that
symbol will discarded and long gone by that time already, causing failed
paging request.

That happens during the next config combination:

    EXYNOS_USI=m
    SERIAL_SAMSUNG=y
    SERIAL_SAMSUNG_CONSOLE=y

That config should be completely possible, so rather than limiting
SERIAL_SAMSUNG choice to "m" only when USI=m, remove __init keyword for
all affected functions.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211204195757.8600-6-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:54:37 +01:00
Sam Protsenko 0882b473b0 tty: serial: samsung: Enable console as module
Enable serial driver to be built as a module. To do so, init the console
support on driver/module load instead of using console_initcall().

Inspired by commit 87a0b9f98a ("tty: serial: meson: enable console as
module").

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211204195757.8600-5-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:54:10 +01:00
Sam Protsenko 59f37b7370 tty: serial: samsung: Remove USI initialization
USI control is now extracted to the dedicated USI driver. Remove USI
related code from serial driver to avoid conflicts and code duplication.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211204195757.8600-4-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:53:44 +01:00
Greg Kroah-Hartman 35eaa42c4a Merge 5.16-rc6 into tty-next
We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 10:00:30 +01:00
Linus Torvalds a7904a5389 Linux 5.16-rc6 2021-12-19 14:14:33 -08:00
Linus Torvalds f291e2d899 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
 "Two small fixes, one of which was being worked around in selftests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Retry page fault if MMU reload is pending and root has no sp
  KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
  KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
2021-12-19 12:44:03 -08:00
Linus Torvalds 2da09da4ae Merge tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block
Pull block revert from Jens Axboe:
 "It turns out that the fix for not hammering on the delayed work timer
  too much caused a performance regression for BFQ, so let's revert the
  change for now.

  I've got some ideas on how to fix it appropriately, but they should
  wait for 5.17"

* tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block:
  Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"
2021-12-19 12:38:53 -08:00
Linus Torvalds a76c3d0358 Merge tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:

 - Clear the PCI_MSIX_FLAGS_MASKALL bit too on the error path so that it
   is restored to its reset state

 - Mask MSI-X vectors late on the init path in order to handle
   out-of-spec Marvell NVME devices which apparently look at the MSI-X
   mask even when MSI-X is disabled

* tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error
  PCI/MSI: Mask MSI-X vectors only on success
2021-12-19 12:28:46 -08:00
Linus Torvalds e1fe1b10e6 Merge tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:

 - Make sure the CLOCK_REALTIME to CLOCK_MONOTONIC offset is never
   positive

* tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Really make sure wall_to_monotonic isn't positive
2021-12-19 12:23:18 -08:00
Linus Torvalds 909e1d166c Merge tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:

 - Fix the rtmutex condition checking when the optimistic spinning of a
   waiter needs to be terminated

* tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner()
2021-12-19 12:17:26 -08:00
Linus Torvalds c36d891d78 Merge tag 'core_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull signal handlign fix from Borislav Petkov:

 - Prevent lock contention on the new sigaltstack lock on the
   common-case path, when no changes have been made to the alternative
   signal stack.

* tag 'core_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  signal: Skip the altstack update when not needed
2021-12-19 11:46:54 -08:00
Linus Torvalds a4cc5ea443 Merge tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:

 - only enable pci_remap_iospace() for Ralink devices

* tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Only define pci_remap_iospace() for Ralink
2021-12-19 11:40:11 -08:00
Linus Torvalds 713ab911f2 Merge tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
 "Fix a recently introduced oops at boot on 85xx in some configurations.

  Fix crashes when loading some livepatch modules with
  STRICT_MODULE_RWX.

  Thanks to Joe Lawrence, Russell Currey, and Xiaoming Ni"

* tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/module_64: Fix livepatching for RO modules
  powerpc/85xx: Fix oops when CONFIG_FSL_PMC=n
2021-12-19 11:31:14 -08:00
Linus Torvalds 9273d6cb99 Merge tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
 "Two cifs/smb3 fixes, one fscache related, and one mount parsing
  related for stable"

* tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: sanitize multiple delimiters in prepath
  cifs: ignore resource_id while getting fscache super cookie
2021-12-19 11:23:02 -08:00
Sean Christopherson 18c841e1f4 KVM: x86: Retry page fault if MMU reload is pending and root has no sp
Play nice with a NULL shadow page when checking for an obsolete root in
the page fault handler by flagging the page fault as stale if there's no
shadow page associated with the root and KVM_REQ_MMU_RELOAD is pending.
Invalidating memslots, which is the only case where _all_ roots need to
be reloaded, requests all vCPUs to reload their MMUs while holding
mmu_lock for lock.

The "special" roots, e.g. pae_root when KVM uses PAE paging, are not
backed by a shadow page.  Running with TDP disabled or with nested NPT
explodes spectaculary due to dereferencing a NULL shadow page pointer.

Skip the KVM_REQ_MMU_RELOAD check if there is a valid shadow page for the
root.  Zapping shadow pages in response to guest activity, e.g. when the
guest frees a PGD, can trigger KVM_REQ_MMU_RELOAD even if the current
vCPU isn't using the affected root.  I.e. KVM_REQ_MMU_RELOAD can be seen
with a completely valid root shadow page.  This is a bit of a moot point
as KVM currently unloads all roots on KVM_REQ_MMU_RELOAD, but that will
be cleaned up in the future.

Fixes: a955cad84c ("KVM: x86/mmu: Retry page fault if root is invalidated by memslot update")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211209060552.2956723-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19 19:38:58 +01:00
Vitaly Kuznetsov 0b091a43d7 KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend
on guest visible CPUIDs and (incorrect) KVM logic implementing it is
about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden
and causes test to fail.

Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: feb627e8d6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19 19:35:29 +01:00
Vitaly Kuznetsov 1aa2abb33a KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should
not depend on guest visible CPUID entries, even if just to allow
creating/restoring guest MSRs and CPUIDs in any sequence.

Fixes: 27461da310 ("KVM: x86/pmu: Support full width counting")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19 19:35:18 +01:00
Jens Axboe 87959fa16c Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"
This reverts commit cb2ac2912a.

Alex and the kernel test robot report that this causes a significant
performance regression with BFQ. I can reproduce that result, so let's
revert this one as we're close to -rc6 and we there's no point in trying
to rush a fix.

Link: https://lore.kernel.org/linux-block/1639853092.524jxfaem2.none@localhost/
Link: https://lore.kernel.org/lkml/20211219141852.GH14057@xsang-OptiPlex-9020/
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-19 07:58:44 -07:00
Linus Torvalds 3f667b5d40 Merge tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
 "Here are two small tty/serial fixes for 5.16-rc6.  They include:

   - n_hdlc fix for syzbot reported problem that you were previously
     copied on.

   - 8250_fintek driver fix that resolved a console problem by removing
     a previous change.

  Both have been in linux-next with no reported issues"

* tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_fintek: Fix garbled text for console
  tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronous
2021-12-18 13:23:55 -08:00
Linus Torvalds fb7d082913 Merge tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for reported problems.
  They include:

   - dwc2 driver fixes

   - xhci driver fixes

   - cdnsp driver fixes

   - typec driver fix

   - gadget u_ether driver fix

   - new quirk additions

   - usb gadget endpoint calculation fix

   - usb serial new device ids

   - revert of a xhci-dbg change that broke early debug booting

  All changes, except for the revert, have been in linux-next with no
  reported problems. The revert was from yesterday, and it was reported
  by the developers affected that it resolved their problem"

* tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "usb: early: convert to readl_poll_timeout_atomic()"
  usb: typec: tcpm: fix tcpm unregister port but leave a pending timer
  usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
  USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)
  usb: xhci: Extend support for runtime power management for AMD's Yellow carp.
  usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe
  USB: gadget: bRequestType is a bitfield, not a enum
  USB: serial: option: add Telit FN990 compositions
  USB: serial: cp210x: fix CP2105 GPIO registration
  usb: cdnsp: Fix incorrect status for control request
  usb: cdnsp: Fix issue in cdnsp_log_ep trace event
  usb: cdnsp: Fix incorrect calling of cdnsp_died function
  usb: xhci-mtk: fix list_del warning when enable list debug
  usb: gadget: u_ether: fix race in setting MAC address in setup phase
2021-12-18 13:16:43 -08:00
Linus Torvalds 0f03adcca7 Merge tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix segfaults in 'perf inject' related to usage of unopened files

 - The return value of hashmap__new() should be checked using IS_ERR()

* tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf inject: Fix segfault due to perf_data__fd() without open
  perf inject: Fix segfault due to close without open
  perf expr: Fix missing check for return value of hashmap__new()
2021-12-18 11:53:14 -08:00