IXP4xx is being migrated to device tree only. Convert this
driver to use device tree probing.
Pull in all the boardfile code from the one boardfile and
make it local, pull all the boardfile parameters from the
device tree instead of the board file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds device tree bindings for the IXP4xx V.35 WAN high
speed serial (HSS) link.
An example is added to the NPE example where the HSS appears
as a child.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A contact at Realtek has clarified what exactly the units of RGMII RX
delay are. The answer is that the unit of RX delay is "about 0.3 ns".
Take this into account when parsing rx-internal-delay-ps by
approximating the closest step value. Delays of more than 2.1 ns are
rejected.
This obviously contradicts the previous assumption in the driver that a
step value of 4 was "about 2 ns", but Realtek also points out that it is
easy to find more than one RX delay step value which makes RGMII work.
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Cc: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Probe deferral is not an error, so don't log this as an error:
[0.590156] realtek-smi ethernet-switch: unable to register switch ret = -517
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior patch:
]# TESTS=vlmc_filtering_test ./bridge_vlan_mcast.sh
TEST: Vlan multicast snooping enable [ OK ]
Device "bridge" does not exist.
TEST: Disable multicast vlan snooping when vlan filtering is disabled [FAIL]
Vlan filtering is disabled but multicast vlan snooping is still enabled
After patch:
# TESTS=vlmc_filtering_test ./bridge_vlan_mcast.sh
TEST: Vlan multicast snooping enable [ OK ]
TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ]
Fixes: f5a9dd58f4 ("selftests: net: bridge: add test for vlan_filtering dependency")
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier says:
====================
net: mpls: Cleanup nexthop iterator macros
The mpls macros for_nexthops and change_nexthops were probably copied
from decnet or ipv4 but they grew a superfluous variable and lost a
beneficial "const".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are separate for_nexthops and change_nexthops iterators. The
for_nexthops variant should use const.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__nh is just a copy of nh with a different type.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephan Gerhold says:
====================
net: wwan: Add Qualcomm BAM-DMUX WWAN network driver
The BAM Data Multiplexer provides access to the network data channels
of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916
or MSM8974. This series adds a driver that allows using it.
All the changes in this patch series are based on a quite complicated
driver from Qualcomm [1]. The driver has been used in postmarketOS [2]
on various smartphones/tablets based on Qualcomm MSM8916 and MSM8974
for more than a year now with no reported problems. It works out of
the box with open-source WWAN userspace such as ModemManager.
[1]: https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/soc/qcom/bam_dmux.c?h=LA.BR.1.2.9.1-02310-8x16.0
[2]: https://postmarketos.org/
Changes in v3:
- Clarify DT schema based on discussion
- Drop bam_dma/dmaengine patches since they already landed in 5.16
- Rebase on net-next
- Simplify cover letter and commit messages
Changes in v2:
- Rename "qcom,remote-power-collapse" -> "qcom,powered-remotely"
- Rebase on net-next and fix conflicts
- Rename network interfaces from "rmnet%d" -> "wwan%d"
- Fix wrong file name in MAINTAINERS entry
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The BAM Data Multiplexer provides access to the network data channels of
modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916 or
MSM8974. It is built using a simple protocol layer on top of a DMA engine
(Qualcomm BAM) and bidirectional interrupts to coordinate power control.
The modem announces a fixed set of channels by sending an OPEN command.
The driver exports each channel as separate network interface so that
a connection can be established via QMI from userspace. The network
interface can work either in Ethernet or Raw-IP mode (configurable via
QMI). However, Ethernet mode seems to be broken with most firmwares
(network packets are actually received as Raw-IP), therefore the driver
only supports Raw-IP mode.
Note that the control channel (QMI/AT) is entirely separate from
BAM-DMUX and is already supported by the RPMSG_WWAN_CTRL driver.
The driver uses runtime PM to coordinate power control with the modem.
TX/RX buffers are put in a kind of "ring queue" and submitted via
the bam_dma driver of the DMAEngine subsystem.
The basic architecture looks roughly like this:
+------------+ +-------+
[IPv4/6] | BAM-DMUX | | |
[Data...] | | | |
---------->|wwan0 | [DMUX chan: x] | |
[IPv4/6] | (chan: 0) | [IPv4/6] | |
[Data...] | | [Data...] | |
---------->|wwan1 |--------------->| Modem |
| (chan: 1) | BAM | |
[IPv4/6] | ... | (DMA Engine) | |
[Data...] | | | |
---------->|wwan7 | | |
| (chan: 7) | | |
+------------+ +-------+
Note that some newer firmware versions support QMAP ("rmnet" driver)
as additional multiplexing layer on top of BAM-DMUX, but this is not
currently supported by this driver.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BAM Data Multiplexer provides access to the network data channels of
modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916 or
MSM8974. It is built using a simple protocol layer on top of a DMA engine
(Qualcomm BAM) and bidirectional interrupts to coordinate power control.
The device tree node combines the incoming interrupt with the outgoing
interrupts (smem-states) as well as the two DMA channels, which allows
the BAM-DMUX driver to request all necessary resources.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: vxlan: add macro definition for number of IANA VXLAN-GPE port
This series add macro definition for number of IANA VXLAN-GPE port for
cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The writer acquires dev_base_lock with disabled bottom halves.
The reader can acquire dev_base_lock without disabling bottom halves
because there is no writer in softirq context.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves (as in write_lock_bh()) and somewhere else with
enabled bottom halves (as by read_lock() in netstat_show()) followed by
disabling bottom halves (cxgb_get_stats() -> t4_wr_mbox_meat_timeout()
-> spin_lock_bh()). This is the reverse locking order.
All read_lock() invocation are from sysfs callback which are not invoked
from softirq context. Therefore there is no need to disable bottom
halves while acquiring a write lock.
Acquire the write lock of dev_base_lock without disabling bottom halves.
Reported-by: Pei Zhang <pezhang@redhat.com>
Reported-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously commit e02d494d2c ("l2tp: Convert rwlock to RCU") converted
most, but not all, rwlock instances in the l2tp subsystem to RCU.
The remaining rwlock protects the per-tunnel hashlist of sessions which
is used for session lookups in the UDP-encap data path.
Convert the remaining rwlock to rcu to improve performance of UDP-encap
tunnels.
Note that the tunnel and session, which both live on RCU-protected
lists, use slightly different approaches to incrementing their refcounts
in the various getter functions.
The tunnel has to use refcount_inc_not_zero because the tunnel shutdown
process involves dropping the refcount to zero prior to synchronizing
RCU readers (via. kfree_rcu).
By contrast, the session shutdown removes the session from the list(s)
it is on, synchronizes with readers, and then decrements the session
refcount. Since the getter functions increment the session refcount
with the RCU read lock held we prevent getters seeing a zero session
refcount, and therefore don't need to use refcount_inc_not_zero.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier says:
====================
net: mvneta: mqprio cleanups and shaping support
This is the second version of the series that adds some improvements to the
existing mqprio implementation in mvneta, and adds support for
egress shaping offload.
The first 3 patches are some minor cleanups, such as using the
tc_mqprio_qopt_offload structure to get access to more offloading
options, cleaning the logic to detect whether or not we should offload
mqprio setting, and allowing to have a 1 to N mapping between TCs and
queues.
The last patch adds traffic shaping offload, using mvneta's per-queue
token buckets, allowing to limit rates from 10Kbps up to 5Gbps with
10Kbps increments.
This was tested only on an Armada 3720, with traffic up to 2.5Gbps.
Changes since V1 fixes the build for 32bits kernels, using the right
div helpers as suggested by Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The mvneta controller is able to do some tocken-bucket per-queue traffic
shaping. This commit adds support for setting these using the TC mqprio
interface.
The token-bucket parameters are customisable, but the current
implementation configures them to have a 10kbps resolution for the
rate limitation, since it allows to cover the whole range of max_rate
values from 10kbps to 5Gbps with 10kbps increments.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mqprio implementation assumed that we are only using one
queue per TC. Use the offset and count parameters to allow using
multiple queues per TC. In that case, the controller will use a standard
round-robin algorithm to pick queues assigned to the same TC, with the
same priority.
This only applies to VLAN priorities in ingress traffic, each TC
corresponding to a vlan priority.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qopt->hw flag is set by the TC code according to the offloading mode
asked by user. Don't force-set it in the driver, but instead read it to
make sure we do what's asked.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
that allows passing extra parameters, such as traffic shaping. This commit
converts the current mqprio code to that new struct.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use devm_ioremap() instead of ioremap() to avoid iounmap() missing.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima says:
====================
af_unix: Replace unix_table_lock with per-hash locks.
The hash table of AF_UNIX sockets is protected by a single big lock,
unix_table_lock. This series replaces it with small per-hash locks.
1st - 2nd : Misc refactoring
3rd - 8th : Separate BSD/abstract address logics
9th - 11th : Prep to save a hash in each socket
12th : Replace the big lock
13th : Speed up autobind()
Note to maintainers:
The 12th patch adds two kinds of Sparse warnings on patchwork:
about unix_table_double_lock/unlock()
We can avoid this by adding two apparent acquires/releases annotations,
but there are the same kinds of warnings about unix_state_double_lock().
about unix_next_socket() and unix_seq_stop() (/proc/net/unix)
This is because Sparse does not understand logic in unix_next_socket(),
which leaves a spin lock held until it returns NULL.
Also, tcp_seq_stop() causes a warning for the same reason.
These warnings seem reasonable, but let me know if there is any better way.
Please see [0] for details.
[0]: https://lore.kernel.org/netdev/20211117001611.74123-1-kuniyu@amazon.co.jp/
====================
Link: https://lore.kernel.org/r/20211124021431.48956-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we bind an AF_UNIX socket without a name specified, the kernel selects
an available one from 0x00000 to 0xFFFFF. unix_autobind() starts searching
from a number in the 'static' variable and increments it after acquiring
two locks.
If multiple processes try autobind, they obtain the same lock and check if
a socket in the hash list has the same name. If not, one process uses it,
and all except one end up retrying the _next_ number (actually not, it may
be incremented by the other processes). The more we autobind sockets in
parallel, the longer the latency gets. We can avoid such a race by
searching for a name from a random number.
These show latency in unix_autobind() while 64 CPUs are simultaneously
autobind-ing 1024 sockets for each.
Without this patch:
usec : count distribution
0 : 1176 |*** |
2 : 3655 |*********** |
4 : 4094 |************* |
6 : 3831 |************ |
8 : 3829 |************ |
10 : 3844 |************ |
12 : 3638 |*********** |
14 : 2992 |********* |
16 : 2485 |******* |
18 : 2230 |******* |
20 : 2095 |****** |
22 : 1853 |***** |
24 : 1827 |***** |
26 : 1677 |***** |
28 : 1473 |**** |
30 : 1573 |***** |
32 : 1417 |**** |
34 : 1385 |**** |
36 : 1345 |**** |
38 : 1344 |**** |
40 : 1200 |*** |
With this patch:
usec : count distribution
0 : 1855 |****** |
2 : 6464 |********************* |
4 : 9936 |******************************** |
6 : 12107 |****************************************|
8 : 10441 |********************************** |
10 : 7264 |*********************** |
12 : 4254 |************** |
14 : 2538 |******** |
16 : 1596 |***** |
18 : 1088 |*** |
20 : 800 |** |
22 : 670 |** |
24 : 601 |* |
26 : 562 |* |
28 : 525 |* |
30 : 446 |* |
32 : 378 |* |
34 : 337 |* |
36 : 317 |* |
38 : 314 |* |
40 : 298 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Walleij
Alvin Šipraga
Ivan Vecera
David S. Miller
Benjamin Poirier
Stephan Gerhold
Hao Chen
Sebastian Andrzej Siewior
Tom Parkin
Maxime Chevallier
Yang Yingliang
Jakub Kicinski
Kuniyuki Iwashima