Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel)
gets populated only when DMA remapping is enabled (dmar_disabled = 0)
irrespective of whether interrupt remapping is enabled or not.
Instead, populate the intel iommu debugfs directory if any IOMMUs are
detected.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ee2636b867 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") accidentally left out the ir_data pointer when
calling modity_irte_ga(), which causes the function amd_iommu_update_ga()
to return prematurely due to struct amd_ir_data.ref is NULL and
the "is_run" bit of IRTE does not get updated properly.
This results in bad I/O performance since IOMMU AVIC always generate GA Log
entry and notify IOMMU driver and KVM when it receives interrupt from the
PCI pass-through device instead of directly inject interrupt to the vCPU.
Fixes by passing ir_data when calling modify_irte_ga() as done previously.
Fixes: b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VMD subdevices are created with a PCI domain ID of 0x10000 or
higher.
These subdevices are also handled like all other PCI devices by
dmar_pci_bus_notifier().
However, when dmar_alloc_pci_notify_info() take records of such devices,
it will truncate the domain ID to a u16 value (in info->seg).
The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if
it is 0000:00:02.0.
In the unlucky event that a real device also exists at 0000:00:02.0 and
also has a device-specific entry in the DMAR table,
dmar_insert_dev_scope() will crash on:
BUG_ON(i >= devices_cnt);
That's basically a sanity check that only one PCI device matches a
single DMAR entry; in this case we seem to have two matching devices.
Fix this by ignoring devices that have a domain number higher than
what can be looked up in the DMAR table.
This problem was carefully diagnosed by Jian-Hong Pan.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Fixes: 59ce0515cd ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When base address in RHSA structure doesn't match base address in
each DRHD structure, the base address in last DRHD is printed out.
This doesn't make sense when there are multiple DRHD units, fix it
by printing the buggy RHSA's base address.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Fixes: fd0c889489 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:
* WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
* significant kernel issues that need prompt attention if they should ever
* appear at runtime.
*
* Do not use these macros when checking for invalid external inputs
The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.
Fixes: 556ab45f9a ("ioat2: catch and recover from broken vtd configurations v6")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:
* WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
* significant kernel issues that need prompt attention if they should ever
* appear at runtime.
*
* Do not use these macros when checking for invalid external inputs
The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.
Some distros, e.g. Fedora, have tools watching for the kernel backtraces
logged by the WARN macros and offer the user an option to file a bug for
this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr
+ another iommu WARN_TAINT, addressed in another patch, have lead to over
a 100 bugs being filed this way.
This commit replaces the WARN_TAINT("...") call, with a
pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call
avoiding the backtrace and thus also avoiding bug-reports being filed
about this against the kernel.
Fixes: f5a68bb075 ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874
Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:
* WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
* significant kernel issues that need prompt attention if they should ever
* appear at runtime.
*
* Do not use these macros when checking for invalid external inputs
The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.
Some distros, e.g. Fedora, have tools watching for the kernel backtraces
logged by the WARN macros and offer the user an option to file a bug for
this when these are encountered. The WARN_TAINT in warn_invalid_dmar()
+ another iommu WARN_TAINT, addressed in another patch, have lead to over
a 100 bugs being filed this way.
This commit replaces the WARN_TAINT("...") calls, with
pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls
avoiding the backtrace and thus also avoiding bug-reports being filed
about this against the kernel.
Fixes: fd0c889489 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Fixes: e625b4a95d ("iommu/vt-d: Parse ANDD records")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200309140138.3753-2-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1564895
Similar to the commit 02d715b4a8 ("iommu/vt-d: Fix RCU list debugging
warnings"), there are several other places that call
list_for_each_entry_rcu() outside of an RCU read side critical section
but with dmar_global_lock held. Silence those false positives as well.
drivers/iommu/intel-iommu.c:4288 RCU-list traversed in non-reader section!!
1 lock held by swapper/0/1:
#0: ffffffff935892c8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1ad/0xb97
drivers/iommu/dmar.c:366 RCU-list traversed in non-reader section!!
1 lock held by swapper/0/1:
#0: ffffffff935892c8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x125/0xb97
drivers/iommu/intel-iommu.c:5057 RCU-list traversed in non-reader section!!
1 lock held by swapper/0/1:
#0: ffffffffa71892c8 (dmar_global_lock){++++}, at: intel_iommu_init+0x61a/0xb13
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are several places traverse RCU-list without holding any lock in
intel_iommu_init(). Fix them by acquiring dmar_global_lock.
WARNING: suspicious RCU usage
-----------------------------
drivers/iommu/intel-iommu.c:5216 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/1.
Call Trace:
dump_stack+0xa0/0xea
lockdep_rcu_suspicious+0x102/0x10b
intel_iommu_init+0x947/0xb13
pci_iommu_init+0x26/0x62
do_one_initcall+0xfe/0x500
kernel_init_freeable+0x45a/0x4f8
kernel_init+0x11/0x139
ret_from_fork+0x3a/0x50
DMAR: Intel(R) Virtualization Technology for Directed I/O
Fixes: d8190dc638 ("iommu/vt-d: Enable DMA remapping after rmrr mapped")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The way cookie_init_hw_msi_region() allocates the iommu_dma_msi_page
structures doesn't match the way iommu_put_dma_cookie() frees them.
The former performs a single allocation of all the required structures,
while the latter tries to free them one at a time. It doesn't quite
work for the main use case (the GICv3 ITS where the range is 64kB)
when the base granule size is 4kB.
This leads to a nice slab corruption on teardown, which is easily
observable by simply creating a VF on a SRIOV-capable device, and
tearing it down immediately (no need to even make use of it).
Fortunately, this only affects systems where the ITS isn't translated
by the SMMU, which are both rare and non-standard.
Fix it by allocating iommu_dma_msi_page structures one at a time.
Fixes: 7c1b058c8b ("iommu/dma: Handle IOMMU API reserved regions")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we ony support the TTB1 quirk for AArch64 contexts, and
consequently only for 64-bit builds, the sign-extension aspect of the
"are all bits above IAS consistent?" check should implicitly only apply
to 64-bit IOVAs. Change the type of the cast to ensure that 32-bit longs
don't inadvertently get sign-extended, and thus considered invalid, if
they happen to be above 2GB in the TTB0 region.
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Acked-by: Will Deacon <will@kernel.org>
Fixes: db6903010a ("iommu/io-pgtable-arm: Prepare for TTBR1 usage")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
intel_iommu_iova_to_phys() has a bug when it translates an IOVA for a huge
page onto its corresponding physical address. This commit fixes the bug by
accomodating the level of page entry for the IOVA and adds IOVA's lower
address to the physical address.
Cc: <stable@vger.kernel.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Yonghyun Hwang <yonghyun@google.com>
Fixes: 3871794642 ("VT-d: Changes to support KVM")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull ext4 fixes from Ted Ts'o:
"Two more bug fixes (including a regression) for 5.6"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
jbd2: fix data races at struct journal_head
Pull KVM fixes from Paolo Bonzini:
"More bugfixes, including a few remaining "make W=1" issues such as too
large frame sizes on some configurations.
On the ARM side, the compiler was messing up shadow stacks between EL1
and EL2 code, which is easily fixed with __always_inline"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: check descriptor table exits on instruction emulation
kvm: x86: Limit the number of "kvm: disabled by bios" messages
KVM: x86: avoid useless copy of cpufreq policy
KVM: allow disabling -Werror
KVM: x86: allow compiling as non-module with W=1
KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
KVM: Introduce pv check helpers
KVM: let declaration of kvm_get_running_vcpus match implementation
KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
arm64: Ask the compiler to __always_inline functions used by KVM at HYP
KVM: arm64: Define our own swab32() to avoid a uapi static inline
KVM: arm64: Ask the compiler to __always_inline functions used at HYP
kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
KVM: arm/arm64: Fix up includes for trace.h
KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.
Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.
Fixes: 07721feee4 ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull i2c fixes from Wolfram Sang:
"I2C has three driver bugfixes for you. We agreed on the Mac regression
to go in via I2C"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
macintosh: therm_windtunnel: fix regression when instantiating devices
i2c: altera: Fix potential integer overflow
i2c: jz4780: silence log flood on txabrt
If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash. The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.
Fixes: 7c990728b9 ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.
When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.
This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.
Fixes: 3e7bed5271 ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+
journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,
LTP: starting fsync04
/dev/zero: Can't open blockdev
EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
==================================================================
BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]
write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
__jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
__jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
(inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
kjournald2+0x13b/0x450 [jbd2]
kthread+0x1cd/0x1f0
ret_from_fork+0x27/0x50
read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
jbd2_write_access_granted+0x1b2/0x250 [jbd2]
jbd2_write_access_granted at fs/jbd2/transaction.c:1155
jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
__ext4_journal_get_write_access+0x50/0x90 [ext4]
ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
ext4_mb_new_blocks+0x54f/0xca0 [ext4]
ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
ext4_map_blocks+0x3b4/0x950 [ext4]
_ext4_get_block+0xfc/0x270 [ext4]
ext4_get_block+0x3b/0x50 [ext4]
__block_write_begin_int+0x22e/0xae0
__block_write_begin+0x39/0x50
ext4_write_begin+0x388/0xb50 [ext4]
generic_perform_write+0x15d/0x290
ext4_buffered_write_iter+0x11f/0x210 [ext4]
ext4_file_write_iter+0xce/0x9e0 [ext4]
new_sync_write+0x29c/0x3b0
__vfs_write+0x92/0xa0
vfs_write+0x103/0x260
ksys_write+0x9d/0x130
__x64_sys_write+0x4c/0x60
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
5 locks held by fsync04/25724:
#0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
#1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
#2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
#3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
#4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
irq event stamp: 1407125
hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull SCSI fixes from James Bottomley:
"Four small fixes.
Three are in drivers for fairly obvious bugs. The fourth is a set of
regressions introduced by the compat_ioctl changes because some of the
compat updates wrongly replaced .ioctl instead of .compat_ioctl"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
scsi: zfcp: fix wrong data and display format of SFP+ temperature
scsi: sd_sbc: Fix sd_zbc_report_zones()
scsi: libfc: free response frame from GPN_ID
Pull PCI fixes from Bjorn Helgaas:
- Fix build issue on 32-bit ARM with old compilers (Marek Szyprowski)
- Update MAINTAINERS for recent Cadence driver file move (Lukas
Bulwahn)
* tag 'pci-v5.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Correct Cadence PCI driver path
PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers
