The length of outgoing data in an osd request is dependent on the
osd ops that are embedded in that request. Each op is encoded into
a request message using osd_req_encode_op(), so that should be used
to determine the amount of outgoing data implied by the op as it
is encoded.
Have osd_req_encode_op() return the number of bytes of outgoing data
implied by the op being encoded, and accumulate and use that in
ceph_osdc_build_request().
As a result, ceph_osdc_build_request() no longer requires its "len"
parameter, so get rid of it.
Using the sum of the op lengths rather than the length provided is
a valid change because:
- The only callers of osd ceph_osdc_build_request() are
rbd and the osd client (in ceph_osdc_new_request() on
behalf of the file system).
- When rbd calls it, the length provided is only non-zero for
write requests, and in that case the single op has the
same length value as what was passed here.
- When called from ceph_osdc_new_request(), (it's not all that
easy to see, but) the length passed is also always the same
as the extent length encoded in its (single) write op if
present.
This resolves:
http://tracker.ceph.com/issues/4406
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Implement and use cursor routines for page array message data items
for outbound message data.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Implement and use cursor routines for bio message data items for
outbound message data.
(See the previous commit for reasoning in support of the changes
in out_msg_pos_next().)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Switch to using the message cursor for the (non-trail) outgoing
pagelist data item in a message if present.
Notes on the logic changes in out_msg_pos_next():
- only the mds client uses a ceph pagelist for message data;
- if the mds client ever uses a pagelist, it never uses a page
array (or anything else, for that matter) for data in the same
message;
- only the osd client uses the trail portion of a message data,
and when it does, it never uses any other data fields for
outgoing data in the same message; and finally
- only the rbd client uses bio message data (never pagelist).
Therefore out_msg_pos_next() can assume:
- if we're in the trail portion of a message, the message data
pagelist, data, and bio can be ignored; and
- if there is a page list, there will never be any a bio or page
array data, and vice-versa.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This just inserts some infrastructure in preparation for handling
other types of ceph message data items. No functional changes,
just trying to simplify review by separating out some noise.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch lays out the foundation for using generic routines to
manage processing items of message data.
For simplicity, we'll start with just the trail portion of a
message, because it stands alone and is only present for outgoing
data.
First some basic concepts. We'll use the term "data item" to
represent one of the ceph_msg_data structures associated with a
message. There are currently four of those, with single-letter
field names p, l, b, and t. A data item is further broken into
"pieces" which always lie in a single page. A data item will
include a "cursor" that will track state as the memory defined by
the item is consumed by sending data from or receiving data into it.
We define three routines to manipulate a data item's cursor: the
"init" routine; the "next" routine; and the "advance" routine. The
"init" routine initializes the cursor so it points at the beginning
of the first piece in the item. The "next" routine returns the
page, page offset, and length (limited by both the page and item
size) of the next unconsumed piece in the item. It also indicates
to the caller whether the piece being returned is the last one in
the data item.
The "advance" routine consumes the requested number of bytes in the
item (advancing the cursor). This is used to record the number of
bytes from the current piece that were actually sent or received by
the network code. It returns an indication of whether the result
means the current piece has been fully consumed. This is used by
the message send code to determine whether it should calculate the
CRC for the next piece processed.
The trail of a message is implemented as a ceph pagelist. The
routines defined for it will be usable for non-trail pagelist data
as well.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Group the types of message data into an abstract structure with a
type indicator and a union containing fields appropriate to the
type of data it represents. Use this to represent the pages,
pagelist, bio, and trail in a ceph message.
Verify message data is of type NONE in ceph_msg_data_set_*()
routines. Since information about message data of type NONE really
should not be interpreted, get rid of the other assertions in those
functions.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A ceph message has a data payload portion. The memory for that data
(either the source of data to send or the location to place data
that is received) is specified in several ways. The ceph_msg
structure includes fields for all of those ways, but this
mispresents the fact that not all of them are used at a time.
Specifically, the data in a message can be in:
- an array of pages
- a list of pages
- a list of Linux bios
- a second list of pages (the "trail")
(The two page lists are currently only ever used for outgoing data.)
Impose more structure on the ceph message, making the grouping of
some of these fields explicit. Shorten the name of the
"page_alignment" field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define and use macros ceph_msg_has_*() to determine whether to
operate on the pages, pagelist, bio, and trail fields of a message.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function ceph_tcp_recvpage() that behaves in a way
comparable to ceph_tcp_sendpage().
Rearrange the code in both read_partial_message_pages() and
read_partial_message_bio() so they have matching structure,
(similar to what's in write_partial_msg_pages()), and use
this new function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pull the code that reads the data portion into a message into
a separate function read_partial_msg_data().
Rename write_partial_msg_pages() to be write_partial_message_data()
to match its read counterpart, and to reflect its more generic
purpose.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define local variables page_offset and length to represent the range
of bytes within a page that will be sent by ceph_tcp_sendpage() in
write_partial_msg_pages().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In prepare_write_message_data(), various fields are initialized in
preparation for writing message data out. Meanwhile, in
read_partial_message(), there is essentially the same block of code,
operating on message variables associated with an incoming message.
Generalize prepare_write_message_data() so it works for both
incoming and outcoming messages, and use it in both spots. The
did_page_crc is not used for input (so it's harmless to initialize
it).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There are several places where a message's out_msg_pos or in_msg_pos
field is used repeatedly within a function. Use a local pointer
variable for this purpose to unclutter the code.
This and the upcoming cleanup patches are related to:
http://tracker.ceph.com/issues/4403
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
At one time it was necessary to clear a message's bio_iter field to
avoid a bad pointer dereference in write_partial_msg_pages().
That no longer seems to be the case. Here's why.
The message's bio fields represent (in this case) outgoing data.
Between where the bio_iter is made NULL in prepare_write_message()
and the call in that function to prepare_message_data(), the
bio fields are never used.
In prepare_message_data(), init-bio_iter() is called, and the result
of that overwrites the value in the message's bio_iter field.
Because it gets overwritten anyway, there is no need to set it to
NULL. So don't do it.
This resolves:
http://tracker.ceph.com/issues/4402
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The mds client no longer tries to assign zero-length message data,
and the osd client no longer sets its data info more than once.
This allows us to activate assertions in the messenger to verify
these things never happen.
This resolves both of these:
http://tracker.ceph.com/issues/4263http://tracker.ceph.com/issues/4284
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
When an incoming message is destined for the osd client, the
messenger calls the osd client's alloc_msg method. That function
looks up which request has the tid matching the incoming message,
and returns the request message that was preallocated to receive the
response. The response message is therefore known before the
request is even started.
Between the start of the request and the receipt of the response,
the request and its data fields will not change, so there's no
reason we need to hold off setting them. In fact it's preferable
to set them just once because it's more obvious that they're
unchanging.
So set up the fields describing where incoming data is to land in a
response message at the beginning of ceph_osdc_start_request().
Define a helper function that sets these fields, and use it to
set the fields for both outgoing data in the request message and
incoming data in the response.
This resolves:
http://tracker.ceph.com/issues/4284
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Record the number of bytes of data in a page array rather than the
number of pages in the array. It can be assumed that the page array
is of sufficient size to hold the number of bytes indicated (and
offset by the indicated alignment).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Change it so we only assign outgoing data information for messages
if there is outgoing data to send.
This then allows us to add a few more (currently commented-out)
assertions.
This is related to:
http://tracker.ceph.com/issues/4284
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Define ceph_msg_data_set_pagelist(), ceph_msg_data_set_bio(), and
ceph_msg_data_set_trail() to clearly abstract the assignment of the
remaining data-related fields in a ceph message structure. Use the
new functions in the osd client and mds client.
This partially resolves:
http://tracker.ceph.com/issues/4263
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When setting page array information for message data, provide the
byte length rather than the page count ceph_msg_data_set_pages().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a function ceph_msg_data_set_pages(), which more clearly
abstracts the assignment page-related fields for data in a ceph
message structure. Use this new function in the osd client and mds
client.
Ideally, these fields would never be set more than once (with
BUG_ON() calls to guarantee that). At the moment though the osd
client sets these every time it receives a message, and in the event
of a communication problem this can happen more than once. (This
will be resolved shortly, but setting up these helpers first makes
it all a bit easier to work with.)
Rearrange the field order in a ceph_msg structure to group those
that are used to define the possible data payloads.
This partially resolves:
http://tracker.ceph.com/issues/4263
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Record the byte count for an osd request rather than the page count.
The number of pages can always be derived from the byte count (and
alignment/offset) but the reverse is not true.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Rather than explicitly initializing many fields to 0, NULL, or false
in a newly-allocated message, just use kzalloc() for allocating new
messages. This will become a much more convenient way of doing
things anyway for upcoming patches that abstract the data field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
