Where possible, we want the failsafe link configuration (one which won't
hang the OR during modeset because of not enough bandwidth for the mode)
to also be supported by the sink.
This prevents "link rate unsupported by sink" messages when link training
fails.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing
graphics/compute bring-up.
Each subsystem was compared with traces, along with various tests to check
that things generally work as they should, and appears compatible enough
with the current TU106 code to enable support.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
HW has error checks in place which check that pixel depth is explicitly
provided on DP, while HDMI has a "default" setting that we use.
In multi-display configurations with identical modelines, but different
protocols (HDMI + DP, in this case), it was possible for the DP head to
get swapped to the head which previously drove the HDMI output, without
updating HeadSetControlOutputResource(), triggering the error check and
hanging the core update.
Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cursor position updates were accidentally causing us to attempt to interlock
window with window immediate, and without a matching window immediate update,
NVDisplay could hang forever in some circumstances.
Fixes suspend/resume on (at least) Quadro RTX4000 (TU104).
Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On a failed resume we may experience unrecoverable errors. Plumb the error code
through to actually let the driver fail. On a reverse-prime setup this helps the
drm subsystem to at least recover the integrated gpu.
This can especially happen with secboot timing out, leaving the hardware in a
non-functioning state.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For a while, we've had the problem of i2c bus access not grabbing
a runtime PM ref when it's being used in userspace by i2c-dev, resulting
in nouveau spamming the kernel log with errors if anything attempts to
access the i2c bus while the GPU is in runtime suspend. An example:
[ 130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff
Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
on isn't accessible. On x86, the standard behavior for accessing an
unavailable MMIO region is to just return ~0.
Except, that turned out to be a lie. While computers with a clean
concious will return ~0 in this scenario, some machines will actually
completely hang a CPU on certian bad MMIO accesses. This was witnessed
with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
access the i2c bus while the GPU was suspended would result in a CPU
hang:
CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
RIP: 0010:ioread32+0x2b/0x30
Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f
40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
FS: 00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
g94_i2c_aux_xfer+0x326/0x850 [nouveau]
nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
__i2c_transfer+0x14b/0x620
i2c_smbus_xfer_emulated+0x159/0x680
? _raw_spin_unlock_irqrestore+0x1/0x60
? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
? __lock_is_held+0x59/0xa0
__i2c_smbus_xfer+0x138/0x5a0
i2c_smbus_xfer+0x4f/0x80
i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
do_vfs_ioctl+0x408/0x750
ksys_ioctl+0x5e/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f25317f546b
Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]
Yikes! While I wanted to try to make it so that accessing an i2c bus on
nouveau would wake up the GPU as needed, airlied pointed out that pretty
much any usecase for userspace accessing an i2c bus on a GPU (mainly for
the DDC brightness control that some displays have) is going to only be
useful while there's at least one display enabled on the GPU anyway, and
the GPU never sleeps while there's displays running.
Since teaching the i2c bus to wake up the GPU on userspace accesses is a
good deal more difficult than it might seem, mostly due to the fact that
we have to use the i2c bus during runtime resume of the GPU, we instead
opt for the easiest solution: don't let userspace access i2c busses on
the GPU at all while it's in runtime suspend.
Changes since v1:
* Also disable i2c busses that run over DP AUX
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit 3a6536c51d ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE")
added a definition of ACPI_VIDEO_NOTIFY_PROBE because <acpi/video.h> didn't
supply one. Later, commit eff4a751cc ("ACPI / video: Move
ACPI_VIDEO_NOTIFY_* defines to acpi/video.h") moved ACPI_VIDEO_NOTIFY_PROBE
and other definitions to <acpi/video.h>, so the copy in nouveau_display.c
is now unnecessary.
Remove the unnecessary definition from nouveau_display.c.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the BAR initialization failed it may leave the vmm structure in an
unitialized state, leading to a null-pointer-dereference when the vmm is
dereferenced during teardown.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
With the previous patch drm_crtc_find will return NULL when the crtc
isn't in our lease, which will then disable the plane/connector. No
longer an issue since the lessor can't escape their lease terms
anymore, but not quite great semantics yet either.
Catch this and return -EACCES, so that at least evil test cases have a
better chance of making sure the kernel works correctly.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-8-daniel.vetter@ffwll.ch