This patch is to implement Sender-Side Procedures for the Add
Outgoing and Incoming Streams Request Parameter described in
rfc6525 section 5.1.5-5.1.6.
It is also to add sockopt SCTP_ADD_STREAMS in rfc6525 section
6.3.4 for users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to implement Sender-Side Procedures for the SSN/TSN
Reset Request Parameter descibed in rfc6525 section 5.1.4.
It is also to add sockopt SCTP_RESET_ASSOC in rfc6525 section 6.3.3
for users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tracksticks on the Lenovo thinkpads have their buttons connected
through the touchpad device. We already fixed that in synaptics.c, but
when we switch the device into RMI4 mode to have proper support, the
pass-through functionality can't deal with them easily.
We add a new PS/2 flag and protocol designed for psmouse. The RMI4 F03
pass-through can then emit a special set of commands to notify psmouse the
state of the buttons.
This patch implements the protocol in psmouse, while an other will
do the same for rmi4-f03.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The nl80211_nan_dual_band_conf enumeration doesn't make much sense.
The default value is assigned to a bit, which makes it weird if the
default bit and other bits are set at the same time.
To improve this, get rid of NL80211_NAN_BAND_DEFAULT and add a wiphy
configuration to let the drivers define which bands are supported.
This is exposed to the userspace, which then can make a decision on
which band(s) to use. Additionally, rename all "dual_band" elements
to "bands", to make things clearer.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch implements the kernel side of the TCP option patch.
Signed-off-by: Manuel Messner <mm@skelett.io>
Reviewed-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just like with counters the direction attribute is optional.
We set priv->dir to MAX unconditionally to avoid duplicating the assignment
for all keys with optional direction.
For keys where direction is mandatory, existing code already returns
an error.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If NFT_EXTHDR_F_PRESENT is set, exthdr will not copy any header field
data into *dest, but instead set it to 1 if the header is found and 0
otherwise.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Update the drivers to pass the RSSI level as a cfg80211_cqm_rssi_notify
parameter and pass this value to userspace in a new nl80211 attribute.
This helps both userspace and also helps in the implementation of the
multiple RSSI thresholds CQM mechanism.
Note for marvell/mwifiex I pass 0 for the RSSI value because the new
RSSI value is not available to the driver at the time of the
cfg80211_cqm_rssi_notify call, but the driver queries the new value
immediately after that, so it is actually available just a moment later
if we wanted to defer caling cfg80211_cqm_rssi_notify until that moment.
Without this, the new cfg80211 code (patch 3) will call .get_station
which will send a duplicate HostCmd_CMD_RSSI_INFO command to the hardware.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The conflict was an interaction between a bug fix in the
netvsc driver in 'net' and an optimization of the RX path
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
The big feature this time is support for POWER9 using the radix-tree
MMU for host and guest. This required some changes to arch/powerpc
code, so I talked with Michael Ellerman and he created a topic branch
with this patchset, which I merged into kvm-ppc-next and which Michael
will pull into his tree. Michael also put in some patches from Nick
Piggin which fix bugs in the interrupt vector code in relocatable
kernels when coming from a KVM guest.
Other notable changes include:
* Add the ability to change the size of the hashed page table,
from David Gibson.
* XICS (interrupt controller) emulation fixes and improvements,
from Li Zhong.
* Bug fixes from myself and Thomas Huth.
These patches define some new KVM capabilities and ioctls, but there
should be no conflicts with anything else currently upstream, as far
as I am aware.
Add a hypercall to retrieve the host realtime clock and the TSC value
used to calculate that clock read.
Used to implement clock synchronization between host and guest.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch is a quick fixup of the user structures that will prevent
the structures from being different sizes on 32 and 64 bit archs.
Taking this fix will allow us to *NOT* have to do compat ioctls for
the sed code.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Fixes: 19641f2d76 ("Include: Uapi: Add user ABI for Sed/Opal")
Signed-off-by: Jens Axboe <axboe@fb.com>
The libnetfilter_conntrack userland library always sets IPS_CONFIRMED
when building a CTA_STATUS attribute. If this toggles the bit from
0->1, the parser will return an error. On Linux 4.4+ this will cause any
NFQA_EXP attribute in the packet to be ignored. This breaks conntrackd's
userland helpers because they operate on unconfirmed connections.
Instead of returning -EBUSY if the user program asks to modify an
unchangeable bit, simply ignore the change.
Also, fix the logic so that user programs are allowed to clear
the bits that they are allowed to change.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This resolves the merge errors that were reported in linux-next and it
picks up the staging and IIO fixes that we need/want in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next
tree, they are:
1) Stash ctinfo 3-bit field into pointer to nf_conntrack object from
sk_buff so we only access one single cacheline in the conntrack
hotpath. Patchset from Florian Westphal.
2) Don't leak pointer to internal structures when exporting x_tables
ruleset back to userspace, from Willem DeBruijn. This includes new
helper functions to copy data to userspace such as xt_data_to_user()
as well as conversions of our ip_tables, ip6_tables and arp_tables
clients to use it. Not surprinsingly, ebtables requires an ad-hoc
update. There is also a new field in x_tables extensions to indicate
the amount of bytes that we copy to userspace.
3) Add nf_log_all_netns sysctl: This new knob allows you to enable
logging via nf_log infrastructure for all existing netnamespaces.
Given the effort to provide pernet syslog has been discontinued,
let's provide a way to restore logging using netfilter kernel logging
facilities in trusted environments. Patch from Michal Kubecek.
4) Validate SCTP checksum from conntrack helper, from Davide Caratti.
5) Merge UDPlite conntrack and NAT helpers into UDP, this was mostly
a copy&paste from the original helper, from Florian Westphal.
6) Reset netfilter state when duplicating packets, also from Florian.
7) Remove unnecessary check for broadcast in IPv6 in pkttype match and
nft_meta, from Liping Zhang.
8) Add missing code to deal with loopback packets from nft_meta when
used by the netdev family, also from Liping.
9) Several cleanups on nf_tables, one to remove unnecessary check from
the netlink control plane path to add table, set and stateful objects
and code consolidation when unregister chain hooks, from Gao Feng.
10) Fix harmless reference counter underflow in IPVS that, however,
results in problems with the introduction of the new refcount_t
type, from David Windsor.
11) Enable LIBCRC32C from nf_ct_sctp instead of nf_nat_sctp,
from Davide Caratti.
12) Missing documentation on nf_tables uapi header, from Liping Zhang.
13) Use rb_entry() helper in xt_connlimit, from Geliang Tang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
New nested netlink attribute to associate tunnel info per vlan.
This is used by bridge driver to send tunnel metadata to
bridge ports in vlan tunnel mode. This patch also adds new per
port flag IFLA_BRPORT_VLAN_TUNNEL to enable vlan tunnel mode.
off by default.
One example use for this is a vxlan bridging gateway or vtep
which maps vlans to vn-segments (or vnis). User can configure
per-vlan tunnel information which the bridge driver can use
to bridge vlan into the corresponding vn-segment.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vxlan COLLECT_METADATA mode today solves the per-vni netdev
scalability problem in l3 networks. It expects all forwarding
information to be present in dst_metadata. This patch series
enhances collect metadata mode to include the case where only
vni is present in dst_metadata, and the vxlan driver can then use
the rest of the forwarding information datbase to make forwarding
decisions. There is no change to default COLLECT_METADATA
behaviour. These changes only apply to COLLECT_METADATA when
used with the bridging use-case with a special dst_metadata
tunnel info flag (eg: where vxlan device is part of a bridge).
For all this to work, the vxlan driver will need to now support a
single fdb table hashed by mac + vni. This series essentially makes
this happen.
use-case and workflow:
vxlan collect metadata device participates in bridging vlan
to vn-segments. Bridge driver above the vxlan device,
sends the vni corresponding to the vlan in the dst_metadata.
vxlan driver will lookup forwarding database with (mac + vni)
for the required remote destination information to forward the
packet.
Changes introduced by this patch:
- allow learning and forwarding database state in vxlan netdev in
COLLECT_METADATA mode. Current behaviour is not changed
by default. tunnel info flag IP_TUNNEL_INFO_BRIDGE is used
to support the new bridge friendly mode.
- A single fdb table hashed by (mac, vni) to allow fdb entries with
multiple vnis in the same fdb table
- rx path already has the vni
- tx path expects a vni in the packet with dst_metadata
- prior to this series, fdb remote_dsts carried remote vni and
the vxlan device carrying the fdb table represented the
source vni. With the vxlan device now representing multiple vnis,
this patch adds a src vni attribute to the fdb entry. The remote
vni already uses NDA_VNI attribute. This patch introduces
NDA_SRC_VNI netlink attribute to represent the src vni in a multi
vni fdb table.
iproute2 example (patched and pruned iproute2 output to just show
relevant fdb entries):
example shows same host mac learnt on two vni's.
before (netdev per vni):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self
after this patch with collect metadata in bridged mode (single netdev):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the encode/decode functionality from the ife module instead of using
implementation inside the act_ife.
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This module is responsible for the ife encapsulation protocol
encode/decode logics. That module can:
- ife_encode: encode skb and reserve space for the ife meta header
- ife_decode: decode skb and extract the meta header size
- ife_tlv_meta_encode - encodes one tlv entry into the reserved ife
header space.
- ife_tlv_meta_decode - decodes one tlv entry from the packet
- ife_tlv_meta_next - advance to the next tlv
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the latest version of the IPv6 Segment Routing IETF draft [1] the
cleanup flag is removed and the flags field length is shrunk from 16 bits
to 8 bits. As a consequence, the input of the HMAC computation is modified
in a non-backward compatible way by covering the whole octet of flags
instead of only the cleanup bit. As such, if an implementation compatible
with the latest draft computes the HMAC of an SRH who has other flags set
to 1, then the HMAC result would differ from the current implementation.
This patch carries those modifications to prevent conflict with other
implementations of IPv6 SR.
[1] https://tools.ietf.org/html/draft-ietf-6man-segment-routing-header-05
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Debugging issues caused by pfmemalloc is often tedious.
Add a new SNMP counter to more easily diagnose these problems.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Acked-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This ioctl opens a file to which a socket is bound and
returns a file descriptor. The caller has to have CAP_NET_ADMIN
in the socket network namespace.
Currently it is impossible to get a path and a mount point
for a socket file. socket_diag reports address, device ID and inode
number for unix sockets. An address can contain a relative path or
a file may be moved somewhere. And these properties say nothing about
a mount namespace and a mount point of a socket file.
With the introduced ioctl, we can get a path by reading
/proc/self/fd/X and get mnt_id from /proc/self/fdinfo/X.
In CRIU we are going to use this ioctl to dump and restore unix socket.
Here is an example how it can be used:
$ strace -e socket,bind,ioctl ./test /tmp/test_sock
socket(AF_UNIX, SOCK_STREAM, 0) = 3
bind(3, {sa_family=AF_UNIX, sun_path="test_sock"}, 11) = 0
ioctl(3, SIOCUNIXFILE, 0) = 4
^Z
$ ss -a | grep test_sock
u_str LISTEN 0 1 test_sock 17798 * 0
$ ls -l /proc/760/fd/{3,4}
lrwx------ 1 root root 64 Feb 1 09:41 3 -> 'socket:[17798]'
l--------- 1 root root 64 Feb 1 09:41 4 -> /tmp/test_sock
$ cat /proc/760/fdinfo/4
pos: 0
flags: 012000000
mnt_id: 40
$ cat /proc/self/mountinfo | grep "^40\s"
40 19 0:37 / /tmp rw shared:23 - tmpfs tmpfs rw
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Kerrisk <<mtk.manpages@gmail.com> writes:
I would like to write code that discovers the namespace setup on a live
system. The NS_GET_PARENT and NS_GET_USERNS ioctl() operations added in
Linux 4.9 provide much of what I want, but there are still a couple of
small pieces missing. Those pieces are added with this patch series.
Here's an example program that makes use of the new ioctl() operations.
8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---
/* ns_capable.c
(C) 2016 Michael Kerrisk, <mtk.manpages@gmail.com>
Licensed under the GNU General Public License v2 or later.
Test whether a process (identified by PID) might (subject to LSM checks)
have capabilities in a namespace (identified by a /proc/PID/ns/xxx file).
*/
} while (0)
exit(EXIT_FAILURE); } while (0)
/* Display capabilities sets of process with specified PID */
static void
show_cap(pid_t pid)
{
cap_t caps;
char *cap_string;
caps = cap_get_pid(pid);
if (caps == NULL)
errExit("cap_get_proc");
cap_string = cap_to_text(caps, NULL);
if (cap_string == NULL)
errExit("cap_to_text");
printf("Capabilities: %s\n", cap_string);
}
/* Obtain the effective UID pf the process 'pid' by
scanning its /proc/PID/file */
static uid_t
get_euid_of_process(pid_t pid)
{
char path[PATH_MAX];
char line[1024];
int uid;
snprintf(path, sizeof(path), "/proc/%ld/status", (long) pid);
FILE *fp;
fp = fopen(path, "r");
if (fp == NULL)
errExit("fopen-/proc/PID/status");
for (;;) {
if (fgets(line, sizeof(line), fp) == NULL) {
/* Should never happen... */
fprintf(stderr, "Failure scanning %s\n", path);
exit(EXIT_FAILURE);
}
if (strstr(line, "Uid:") == line) {
sscanf(line, "Uid: %*d %d %*d %*d", &uid);
return uid;
}
}
}
int
main(int argc, char *argv[])
{
int ns_fd, userns_fd, pid_userns_fd;
int nstype;
int next_fd;
struct stat pid_stat;
struct stat target_stat;
char *pid_str;
pid_t pid;
char path[PATH_MAX];
if (argc < 2) {
fprintf(stderr, "Usage: %s PID [ns-file]\n", argv[0]);
fprintf(stderr, "\t'ns-file' is a /proc/PID/ns/xxxx file; "
"if omitted, use the namespace\n"
"\treferred to by standard input "
"(file descriptor 0)\n");
exit(EXIT_FAILURE);
}
pid_str = argv[1];
pid = atoi(pid_str);
if (argc <= 2) {
ns_fd = STDIN_FILENO;
} else {
ns_fd = open(argv[2], O_RDONLY);
if (ns_fd == -1)
errExit("open-ns-file");
}
/* Get the relevant user namespace FD, which is 'ns_fd' if 'ns_fd' refers
to a user namespace, otherwise the user namespace that owns 'ns_fd' */
nstype = ioctl(ns_fd, NS_GET_NSTYPE);
if (nstype == -1)
errExit("ioctl-NS_GET_NSTYPE");
if (nstype == CLONE_NEWUSER) {
userns_fd = ns_fd;
} else {
userns_fd = ioctl(ns_fd, NS_GET_USERNS);
if (userns_fd == -1)
errExit("ioctl-NS_GET_USERNS");
}
/* Obtain 'stat' info for the user namespace of the specified PID */
snprintf(path, sizeof(path), "/proc/%s/ns/user", pid_str);
pid_userns_fd = open(path, O_RDONLY);
if (pid_userns_fd == -1)
errExit("open-PID");
if (fstat(pid_userns_fd, &pid_stat) == -1)
errExit("fstat-PID");
/* Get 'stat' info for the target user namesapce */
if (fstat(userns_fd, &target_stat) == -1)
errExit("fstat-PID");
/* If the PID is in the target user namespace, then it has
whatever capabilities are in its sets. */
if (pid_stat.st_dev == target_stat.st_dev &&
pid_stat.st_ino == target_stat.st_ino) {
printf("PID is in target namespace\n");
printf("Subject to LSM checks, it has the following capabilities\n");
show_cap(pid);
exit(EXIT_SUCCESS);
}
/* Otherwise, we need to walk through the ancestors of the target
user namespace to see if PID is in an ancestor namespace */
for (;;) {
int f;
next_fd = ioctl(userns_fd, NS_GET_PARENT);
if (next_fd == -1) {
/* The error here should be EPERM... */
if (errno != EPERM)
errExit("ioctl-NS_GET_PARENT");
printf("PID is not in an ancestor namespace\n");
printf("It has no capabilities in the target namespace\n");
exit(EXIT_SUCCESS);
}
if (fstat(next_fd, &target_stat) == -1)
errExit("fstat-PID");
/* If the 'stat' info for this user namespace matches the 'stat'
* info for 'next_fd', then the PID is in an ancestor namespace */
if (pid_stat.st_dev == target_stat.st_dev &&
pid_stat.st_ino == target_stat.st_ino)
break;
/* Next time round, get the next parent */
f = userns_fd;
userns_fd = next_fd;
close(f);
}
/* At this point, we found that PID is in an ancestor of the target
user namespace, and 'userns_fd' refers to the immediate descendant
user namespace of PID in the chain of user namespaces from PID to
the target user namespace. If the effective UID of PID matches the
owner UID of descendant user namespace, then PID has all
capabilities in the descendant namespace(s); otherwise, it just has
the capabilities that are in its sets. */
uid_t owner_uid, uid;
if (ioctl(userns_fd, NS_GET_OWNER_UID, &owner_uid) == -1) {
perror("ioctl-NS_GET_OWNER_UID");
exit(EXIT_FAILURE);
}
uid = get_euid_of_process(pid);
printf("PID is in an ancestor namespace\n");
if (owner_uid == uid) {
printf("And its effective UID matches the owner "
"of the namespace\n");
printf("Subject to LSM checks, PID has all capabilities in "
"that namespace!\n");
} else {
printf("But its effective UID does not match the owner "
"of the namespace\n");
printf("Subject to LSM checks, it has the following capabilities\n");
show_cap(pid);
}
exit(EXIT_SUCCESS);
}
8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---
Michael Kerrisk (2):
nsfs: Add an ioctl() to return the namespace type
nsfs: Add an ioctl() to return owner UID of a userns
fs/nsfs.c | 13 +++++++++++++
include/uapi/linux/nsfs.h | 9 +++++++--
2 files changed, 20 insertions(+), 2 deletions(-)
