Merge tag 'kvmarm-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

kvmarm updates for 4.11

- GICv3 save restore
- Cache flushing fixes
- MSI injection fix for GICv3 ITS
- Physical timer emulation support

Documentation/devicetree/bindings/mtd/tango-nand.txt

@@ -5,7 +5,7 @@ Required properties:
 - compatible: "sigma,smp8758-nand"
 - reg: address/size of nfc_reg, nfc_mem, and pbus_reg
 - dmas: reference to the DMA channel used by the controller
-- dma-names: "nfc_sbox"
+- dma-names: "rxtx"
 - clocks: reference to the system clock
 - #address-cells: <1>
 - #size-cells: <0>
@@ -17,9 +17,9 @@ Example:
 
 	nandc: nand-controller@2c000 {
 		compatible = "sigma,smp8758-nand";
-		reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>;
+		reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
 		dmas = <&dma0 3>;
-		dma-names = "nfc_sbox";
+		dma-names = "rxtx";
 		clocks = <&clkgen SYS_CLK>;
 		#address-cells = <1>;
 		#size-cells = <0>;

Documentation/devicetree/bindings/net/ti,dp83867.txt

@@ -3,9 +3,11 @@
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
 	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -1,17 +1,23 @@
 Renesas MSIOF spi controller
 
 Required properties:
-- compatible           : "renesas,msiof-<soctype>" for SoCs,
-			 "renesas,sh-msiof" for SuperH, or
-			 "renesas,sh-mobile-msiof" for SH Mobile series.
-			 Examples with soctypes are:
-			 "renesas,msiof-r8a7790" (R-Car H2)
+- compatible           : "renesas,msiof-r8a7790" (R-Car H2)
 			 "renesas,msiof-r8a7791" (R-Car M2-W)
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
 			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
+			 "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
+			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+			 "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+			 "renesas,sh-msiof"      (deprecated)
+
+			 When compatible with the generic version, nodes
+			 must list the SoC-specific version corresponding
+			 to the platform first followed by the generic
+			 version.
+
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
 			 If only one register set is present, it is to be used
@@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*.
 Example:
 
 	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
+		compatible = "renesas,msiof-r8a7791",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;

Documentation/virtual/kvm/devices/arm-vgic-v3.txt

@@ -118,7 +118,7 @@ Groups:
     -EBUSY: One or more VCPUs are running
 
 
-  KVM_DEV_ARM_VGIC_CPU_SYSREGS
+  KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
   Attributes:
     The attr field of kvm_device_attr encodes two values:
     bits:     | 63      ....       32 | 31  ....  16 | 15  ....  0 |
@@ -139,13 +139,15 @@ Groups:
     All system regs accessed through this API are (rw, 64-bit) and
     kvm_device_attr.addr points to a __u64 value.
 
-    KVM_DEV_ARM_VGIC_CPU_SYSREGS accesses the CPU interface registers for the
+    KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS accesses the CPU interface registers for the
     CPU specified by the mpidr field.
 
+    CPU interface registers access is not implemented for AArch32 mode.
+    Error -ENXIO is returned when accessed in AArch32 mode.
   Errors:
     -ENXIO: Getting or setting this register is not yet supported
     -EBUSY: VCPU is running
-    -EINVAL: Invalid mpidr supplied
+    -EINVAL: Invalid mpidr or register value supplied
 
 
   KVM_DEV_ARM_VGIC_GRP_NR_IRQS
@@ -204,3 +206,6 @@ Groups:
     architecture defined MPIDR, and the field is encoded as follows:
       | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
       |    Aff3    |    Aff2    |    Aff1    |    Aff0    |
+  Errors:
+    -EINVAL: vINTID is not multiple of 32 or
+     info field is not VGIC_LEVEL_INFO_LINE_LEVEL

MAINTAINERS

@@ -976,6 +976,7 @@ M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.armlinux.org.uk/
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git
 F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
@@ -1153,6 +1154,7 @@ ARM/CLKDEV SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git clkdev
 F:	arch/arm/include/asm/clkdev.h
 F:	drivers/clk/clkdev.c
 
@@ -1688,6 +1690,7 @@ M:	Krzysztof Kozlowski <krzk@kernel.org>
 R:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 S:	Maintained
 F:	arch/arm/boot/dts/s3c*
 F:	arch/arm/boot/dts/s5p*
@@ -7697,8 +7700,10 @@ F:	drivers/net/dsa/mv88e6xxx/
 F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
 
 MARVELL ARMADA DRM SUPPORT
-M:	Russell King <rmk+kernel@armlinux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-devel
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-fixes
 F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
 F:	Documentation/devicetree/bindings/display/armada/
@@ -8903,8 +8908,10 @@ S:	Supported
 F:	drivers/nfc/nxp-nci
 
 NXP TDA998X DRM DRIVER
-M:	Russell King <rmk+kernel@armlinux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Supported
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-devel
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-fixes
 F:	drivers/gpu/drm/i2c/tda998x_drv.c
 F:	include/drm/i2c/tda998x.h
 

Makefile

@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
-NAME = Roaring Lionus
+EXTRAVERSION = -rc5
+NAME = Anniversary Edition
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arc/Kconfig

@@ -29,7 +29,7 @@ config ARC
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_MEMBLOCK
-	select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
+	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select HANDLE_DOMAIN_IRQ

arch/arc/include/asm/cache.h

@@ -67,7 +67,7 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_IC_PTAG_HI	0x1F
 
 /* Bit val in IC_CTRL */
-#define IC_CTRL_CACHE_DISABLE   0x1
+#define IC_CTRL_DIS		0x1
 
 /* Data cache related Auxiliary registers */
 #define ARC_REG_DC_BCR		0x72	/* Build Config reg */
@@ -80,8 +80,9 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_DC_PTAG_HI	0x5F
 
 /* Bit val in DC_CTRL */
-#define DC_CTRL_INV_MODE_FLUSH  0x40
-#define DC_CTRL_FLUSH_STATUS    0x100
+#define DC_CTRL_DIS		0x001
+#define DC_CTRL_INV_MODE_FLUSH	0x040
+#define DC_CTRL_FLUSH_STATUS	0x100
 
 /*System-level cache (L2 cache) related Auxiliary registers */
 #define ARC_REG_SLC_CFG		0x901
@@ -92,8 +93,8 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_SLC_RGN_END	0x916
 
 /* Bit val in SLC_CONTROL */
+#define SLC_CTRL_DIS		0x001
 #define SLC_CTRL_IM		0x040
-#define SLC_CTRL_DISABLE	0x001
 #define SLC_CTRL_BUSY		0x100
 #define SLC_CTRL_RGN_OP_INV	0x200
 

arch/arc/include/asm/entry-arcv2.h

@@ -16,6 +16,7 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+	PUSH	r30
 	PUSH	r12
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
@@ -72,6 +73,7 @@
 	POPAX	AUX_USER_SP
 1:
 	POP	r12
+	POP	r30
 
 .endm
 

arch/arc/include/asm/module.h

@@ -14,13 +14,13 @@
 
 #include <asm-generic/module.h>
 
-#ifdef CONFIG_ARC_DW2_UNWIND
 struct mod_arch_specific {
+#ifdef CONFIG_ARC_DW2_UNWIND
 	void *unw_info;
 	int unw_sec_idx;
+#endif
 	const char *secstr;
 };
-#endif
 
 #define MODULE_PROC_FAMILY "ARC700"
 

arch/arc/include/asm/ptrace.h

@@ -84,7 +84,7 @@ struct pt_regs {
 	unsigned long fp;
 	unsigned long sp;	/* user/kernel sp depending on where we came from  */
 
-	unsigned long r12;
+	unsigned long r12, r30;
 
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;

arch/arc/include/asm/setup.h

@@ -31,6 +31,7 @@ extern int root_mountflags, end_mem;
 
 void setup_processor(void);
 void __init setup_arch_memory(void);
+long __init arc_get_mem_sz(void);
 
 /* Helpers used in arc_*_mumbojumbo routines */
 #define IS_AVAIL1(v, s)		((v) ? s : "")

arch/arc/kernel/intc-arcv2.c

@@ -77,20 +77,20 @@ void arc_init_IRQ(void)
 
 static void arcv2_irq_mask(struct irq_data *data)
 {
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_ENABLE, 0);
 }
 
 static void arcv2_irq_unmask(struct irq_data *data)
 {
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_ENABLE, 1);
 }
 
 void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
 
 	/*

arch/arc/kernel/intc-compact.c

@@ -57,7 +57,7 @@ static void arc_irq_mask(struct irq_data *data)
 	unsigned int ienb;
 
 	ienb = read_aux_reg(AUX_IENABLE);
-	ienb &= ~(1 << data->irq);
+	ienb &= ~(1 << data->hwirq);
 	write_aux_reg(AUX_IENABLE, ienb);
 }
 
@@ -66,7 +66,7 @@ static void arc_irq_unmask(struct irq_data *data)
 	unsigned int ienb;
 
 	ienb = read_aux_reg(AUX_IENABLE);
-	ienb |= (1 << data->irq);
+	ienb |= (1 << data->hwirq);
 	write_aux_reg(AUX_IENABLE, ienb);
 }
 

arch/arc/kernel/mcip.c

@@ -10,6 +10,7 @@
 
 #include <linux/smp.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/spinlock.h>
 #include <soc/arc/mcip.h>
 #include <asm/irqflags-arcv2.h>
@@ -221,10 +222,13 @@ static irq_hw_number_t idu_first_hwirq;
 static void idu_cascade_isr(struct irq_desc *desc)
 {
 	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	struct irq_chip *core_chip = irq_desc_get_chip(desc);
 	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
 	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
 
+	chained_irq_enter(core_chip, desc);
 	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
+	chained_irq_exit(core_chip, desc);
 }
 
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)

arch/arc/kernel/module.c

@@ -32,8 +32,8 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 #ifdef CONFIG_ARC_DW2_UNWIND
 	mod->arch.unw_sec_idx = 0;
 	mod->arch.unw_info = NULL;
-	mod->arch.secstr = secstr;
 #endif
+	mod->arch.secstr = secstr;
 	return 0;
 }
 
@@ -113,8 +113,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 
 	}
 
+#ifdef CONFIG_ARC_DW2_UNWIND
 	if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0)
 		module->arch.unw_sec_idx = tgtsec;
+#endif
 
 	return 0;
 

arch/arc/mm/cache.c

@@ -23,7 +23,7 @@
 
 static int l2_line_sz;
 static int ioc_exists;
-int slc_enable = 1, ioc_enable = 0;
+int slc_enable = 1, ioc_enable = 1;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 
@@ -271,7 +271,11 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
 
 /*
  * For ARC700 MMUv3 I-cache and D-cache flushes
- * Also reused for HS38 aliasing I-cache configuration
+ *  - ARC700 programming model requires paddr and vaddr be passed in seperate
+ *    AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the
+ *    caches actually alias or not.
+ * -  For HS38, only the aliasing I-cache configuration uses the PTAG reg
+ *    (non aliasing I-cache version doesn't; while D-cache can't possibly alias)
  */
 static inline
 void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
@@ -458,6 +462,21 @@ static inline void __dc_entire_op(const int op)
 	__after_dc_op(op);
 }
 
+static inline void __dc_disable(void)
+{
+	const int r = ARC_REG_DC_CTRL;
+
+	__dc_entire_op(OP_FLUSH_N_INV);
+	write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS);
+}
+
+static void __dc_enable(void)
+{
+	const int r = ARC_REG_DC_CTRL;
+
+	write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS);
+}
+
 /* For kernel mappings cache operation: index is same as paddr */
 #define __dc_line_op_k(p, sz, op)	__dc_line_op(p, p, sz, op)
 
@@ -483,6 +502,8 @@ static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr,
 #else
 
 #define __dc_entire_op(op)
+#define __dc_disable()
+#define __dc_enable()
 #define __dc_line_op(paddr, vaddr, sz, op)
 #define __dc_line_op_k(paddr, sz, op)
 
@@ -597,6 +618,40 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
 #endif
 }
 
+noinline static void slc_entire_op(const int op)
+{
+	unsigned int ctrl, r = ARC_REG_SLC_CTRL;
+
+	ctrl = read_aux_reg(r);
+
+	if (!(op & OP_FLUSH))		/* i.e. OP_INV */
+		ctrl &= ~SLC_CTRL_IM;	/* clear IM: Disable flush before Inv */
+	else
+		ctrl |= SLC_CTRL_IM;
+
+	write_aux_reg(r, ctrl);
+
+	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+
+	/* Important to wait for flush to complete */
+	while (read_aux_reg(r) & SLC_CTRL_BUSY);
+}
+
+static inline void arc_slc_disable(void)
+{
+	const int r = ARC_REG_SLC_CTRL;
+
+	slc_entire_op(OP_FLUSH_N_INV);
+	write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS);
+}
+
+static inline void arc_slc_enable(void)
+{
+	const int r = ARC_REG_SLC_CTRL;
+
+	write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS);
+}
+
 /***********************************************************
  * Exported APIs
  */
@@ -923,21 +978,54 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
 	return 0;
 }
 
-void arc_cache_init(void)
+/*
+ * IO-Coherency (IOC) setup rules:
+ *
+ * 1. Needs to be at system level, so only once by Master core
+ *    Non-Masters need not be accessing caches at that time
+ *    - They are either HALT_ON_RESET and kick started much later or
+ *    - if run on reset, need to ensure that arc_platform_smp_wait_to_boot()
+ *      doesn't perturb caches or coherency unit
+ *
+ * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC,
+ *    otherwise any straggler data might behave strangely post IOC enabling
+ *
+ * 3. All Caches need to be disabled when setting up IOC to elide any in-flight
+ *    Coherency transactions
+ */
+noinline void __init arc_ioc_setup(void)
 {
-	unsigned int __maybe_unused cpu = smp_processor_id();
-	char str[256];
+	unsigned int ap_sz;
 
-	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+	/* Flush + invalidate + disable L1 dcache */
+	__dc_disable();
+
+	/* Flush + invalidate SLC */
+	if (read_aux_reg(ARC_REG_SLC_BCR))
+		slc_entire_op(OP_FLUSH_N_INV);
+
+	/* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */
+	write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
 
 	/*
-	 * Only master CPU needs to execute rest of function:
-	 *  - Assume SMP so all cores will have same cache config so
-	 *    any geomtry checks will be same for all
-	 *  - IOC setup / dma callbacks only need to be setup once
+	 * IOC Aperture size:
+	 *   decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies 512M
+	 * TBD: fix for PGU + 1GB of low mem
+	 * TBD: fix for PAE
 	 */
-	if (cpu)
-		return;
+	ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2;
+	write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz);
+
+	write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
+	write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
+
+	/* Re-enable L1 dcache */
+	__dc_enable();
+}
+
+void __init arc_cache_init_master(void)
+{
+	unsigned int __maybe_unused cpu = smp_processor_id();
 
 	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
 		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
@@ -985,30 +1073,14 @@ void arc_cache_init(void)
 		}
 	}
 
-	if (is_isa_arcv2() && l2_line_sz && !slc_enable) {
+	/* Note that SLC disable not formally supported till HS 3.0 */
+	if (is_isa_arcv2() && l2_line_sz && !slc_enable)
+		arc_slc_disable();
 
-		/* IM set : flush before invalidate */
-		write_aux_reg(ARC_REG_SLC_CTRL,
-			read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM);
-
-		write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
-
-		/* Important to wait for flush to complete */
-		while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
-		write_aux_reg(ARC_REG_SLC_CTRL,
-			read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE);
-	}
+	if (is_isa_arcv2() && ioc_enable)
+		arc_ioc_setup();
 
 	if (is_isa_arcv2() && ioc_enable) {
-		/* IO coherency base - 0x8z */
-		write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
-		/* IO coherency aperture size - 512Mb: 0x8z-0xAz */
-		write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11);
-		/* Enable partial writes */
-		write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
-		/* Enable IO coherency */
-		write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
-
 		__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
 		__dma_cache_inv = __dma_cache_inv_ioc;
 		__dma_cache_wback = __dma_cache_wback_ioc;
@@ -1022,3 +1094,20 @@ void arc_cache_init(void)
 		__dma_cache_wback = __dma_cache_wback_l1;
 	}
 }
+
+void __ref arc_cache_init(void)
+{
+	unsigned int __maybe_unused cpu = smp_processor_id();
+	char str[256];
+
+	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+
+	/*
+	 * Only master CPU needs to execute rest of function:
+	 *  - Assume SMP so all cores will have same cache config so
+	 *    any geomtry checks will be same for all
+	 *  - IOC setup / dma callbacks only need to be setup once
+	 */
+	if (!cpu)
+		arc_cache_init_master();
+}

arch/arc/mm/init.c

@@ -40,6 +40,11 @@ struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 #endif
 
+long __init arc_get_mem_sz(void)
+{
+	return low_mem_sz;
+}
+
 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
 static int __init setup_mem_sz(char *str)
 {

arch/arm/boot/dts/Makefile

@@ -846,6 +846,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-nanopi-m1.dtb	\
 	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-orangepi-2.dtb \
 	sun8i-h3-orangepi-lite.dtb \

arch/arm/boot/dts/am335x-icev2.dts

@@ -170,7 +170,6 @@
 			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
 			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
 			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
 		>;
 	};