Combine found device and created qp into one operation instead of found
device and create qp both are independent operations. when execute
multiple tasks, the different threads may find same device at the same
time, but the number of queues is insufficient on the device. causing
one of threads fail to create a qp. Now fix this, First find device then
create qp, if result failure. the current thread will find next device.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Encapsulate hisi_qm_alloc_qps_node() to new interface to replace
find_zip_device(), which will fix the bug of creating QP failure
especially in multi-thread scenario.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Our handling of ciphers with IV trailing the AAD was correct
but overly complicated. Refactor to simplify and possibly
save one DMA burst.
This has the added bonus of behaving the same as the generic
rfc4543 implementation for none compliants inputs where the
IV in the iv field was not the same as the IV in the AAD.
There should be no change in behaviour with correct inputs.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use crypto_ipsec_check_assoclen() instead of home grown functions.
Clean up some unneeded code as a result. Delete stale comments
while we're at it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move testing of condition to after the point we decide if
we need it or not.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using CAP_SYS_ADMIN which is restricted to the root user,
check the file mode for write permissions before executing commands that
can affect the platform. This allows for more fine-grained access
control to the SEV ioctl interface. This would allow a SEV-only user
or group the ability to administer the platform without requiring them
to be root or granting them overly powerful permissions.
For example:
chown root:root /dev/sev
chmod 600 /dev/sev
setfacl -m g:sev:r /dev/sev
setfacl -m g:sev-admin:rw /dev/sev
In this instance, members of the "sev-admin" group have the ability to
perform all ioctl calls (including the ones that modify platform state).
Members of the "sev" group only have access to the ioctls that do not
modify the platform state.
This also makes opening "/dev/sev" more consistent with how file
descriptors are usually handled. By only checking for CAP_SYS_ADMIN,
the file descriptor could be opened read-only but could still execute
ioctls that modify the platform state. This patch enforces that the file
descriptor is opened with write privileges if it is going to be used to
modify the platform state.
This flexibility is completely opt-in, and if it is not desirable by
the administrator then they do not need to give anyone else access to
/dev/sev.
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use a simpler approach for masking / unmasking the rngc interrupt:
The interrupt is unmasked while self-test is running and when the rngc
driver is used by the hwrng core.
Mask the interrupt again when self test is finished, regardless of
self test success or failure.
Unmask the interrupt in the init function. Add a cleanup function where
the rngc interrupt is masked again.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Read the rng type and hardware revision during probe. Fail the probe
operation if the type is not one of rngc or rngb.
(There's also an rnga type, which needs a different driver.)
Display the type and revision in a debug print if probe was successful.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the device name, it is added by the dev_...() routines.
Drop the error code as well. It will be shown by the driver core when
the probe operation failed.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The rngc requires a new seed for its prng after generating 2^20 160-bit
words of random data. At the moment, we seed the prng only once during
initalisation.
Set the rngc to auto seed mode so that it kicks off the internal
reseeding operation when a new seed is required.
Keep the manual calculation of the initial seed when the device is
probed and switch to automatic seeding afterwards.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make sure that the rngc interrupt is masked if the rngc self test fails.
Self test failure means that probe fails as well. Interrupts should be
masked in this case, regardless of the error.
Cc: stable@vger.kernel.org
Fixes: 1d5449445b ("hwrng: mx-rngc - add a driver for Freescale RNGC")
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the scenario of SMMU translation, the SEC performance of short messages
(<512Bytes) cannot meet our expectations. To avoid this, we reserve the
plat buffer (PBUF) memory for small packets when creating TFM.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to improve performance of small packets (<512Bytes)
in SMMU translation scenario, we need to identify the type of IOMMU
in the SEC probe to process small packets by a different method.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate one workqueue for each QM instead of one for all QMs,
we found the throughput of SEC engine can be increased to
the hardware limit throughput during testing sec2 performance.
so we added this scheme.
Signed-off-by: Ye Kai <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since SEC need not so many workqueues as our test, we just use
one workqueue created by the device driver of QM if necessary,
which will also reduce CPU waste without any throughput decreasing.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do test_aead_vs_generic_impl() before test_aead_inauthentic_inputs() so
that any differences with the generic driver are detected before getting
to the inauthentic input tests, which intentionally use only the driver
being tested (so that they run even if a generic driver is unavailable).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rfc4543 was missing from the list of algorithms that may treat the end
of the AAD buffer specially.
Also, with rfc4106, rfc4309, rfc4543, and rfc7539esp, the end of the AAD
buffer is actually supposed to contain a second copy of the IV, and
we've concluded that if the IV copies don't match the behavior is
implementation-defined. So, the fuzz tests can't easily test that case.
So, make the fuzz tests only use inputs where the two IV copies match.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 40153b10d9 ("crypto: testmgr - fuzz AEADs against their generic implementation")
Cc: Stephan Mueller <smueller@chronox.de>
Originally-from: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kai Ye
Hui Tang
Shukun Tan
Weili Qian
Gilad Ben-Yossef
Hadar Gat
Connor Kuehl
Martin Kaiser
Randy Dunlap
Longfang Liu
Eric Biggers