Merge branch 'systemport'

Florian Fainelli says:

====================
net: Broadcom SYSTEMPORT driver

This patchset adds support for the Broadcom SYSTEMPORT Ethernet MAC
controller which is used in the latest Broadcom BCM7xxx Set Top Box
System-on-a-Chip. This Ethernet MAC is interfaced to an internal
switch which will get a separate driver submitted later on.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/broadcom-systemport.txt

@@ -0,0 +1,29 @@
+* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+Required properties:
+- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
+- reg: address and length of the register set for the device.
+- interrupts: interrupts for the device, first cell must be for the the rx
+  interrupts, and the second cell should be for the transmit queues
+- local-mac-address: Ethernet MAC address (48 bits) of this adapter
+- phy-mode: Should be a string describing the PHY interface to the
+  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
+- fixed-link: see Documentation/devicetree/bindings/net/fsl-tsec-phy.txt for
+  the property specific details
+
+Optional properties:
+- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
+- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
+- systemport,num-txq: number of HW transmit queues, an integer
+- systemport,num-rxq: number of HW receive queues, an integer
+
+Example:
+ethernet@f04a0000 {
+	compatible = "brcm,systemport-v1.00";
+	reg = <0xf04a0000 0x4650>;
+	local-mac-address = [ 00 11 22 33 44 55 ];
+	fixed-link = <0 1 1000 0 0>;
+	phy-mode = "gmii";
+	interrupts = <0x0 0x16 0x0>,
+		<0x0 0x17 0x0>;
+};

MAINTAINERS

@@ -1967,6 +1967,12 @@ S:	Maintained
 F:	drivers/bcma/
 F:	include/linux/bcma/
 
+BROADCOM SYSTEMPORT ETHERNET DRIVER
+M:	Florian Fainelli <f.fainelli@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/ethernet/broadcom/bcmsysport.*
+
 BROCADE BFA FC SCSI DRIVER
 M:	Anil Gurumurthy <anil.gurumurthy@qlogic.com>
 M:	Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>

drivers/net/ethernet/broadcom/Kconfig

@@ -150,4 +150,15 @@ config BGMAC
 	  In case of using this driver on BCM4706 it's also requires to enable
 	  BCMA_DRIVER_GMAC_CMN to make it work.
 
+config SYSTEMPORT
+	tristate "Broadcom SYSTEMPORT internal MAC support"
+	depends on OF
+	select MII
+	select PHYLIB
+	select FIXED_PHY if SYSTEMPORT=y
+	help
+	  This driver supports the built-in Ethernet MACs found in the
+	  Broadcom BCM7xxx Set Top Box family chipset using an internal
+	  Ethernet switch.
+
 endif # NET_VENDOR_BROADCOM

drivers/net/ethernet/broadcom/Makefile

@@ -11,3 +11,4 @@ obj-$(CONFIG_BNX2X) += bnx2x/
 obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
 obj-$(CONFIG_TIGON3) += tg3.o
 obj-$(CONFIG_BGMAC) += bgmac.o
+obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o