Merge tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.17:

- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
  to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
  i.MX8MN display related domain support.
- Add optional continuous burst clock support for imx-weim bus driver.
- Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
  gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
  MIX domain.

* tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
  dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
  soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
  soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
  bus: imx-weim: optionally enable continuous burst clock
  soc: imx: gpcv2: keep i.MX8MM VPU-H1 bus clock active
  soc: imx: gpcv2: Synchronously suspend MIX domains

Link: https://lore.kernel.org/r/20211218071427.26745-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

drivers/bus/imx-weim.c

@@ -21,6 +21,7 @@ struct imx_weim_devtype {
 	unsigned int	cs_stride;
 	unsigned int	wcr_offset;
 	unsigned int	wcr_bcm;
+	unsigned int	wcr_cont_bclk;
 };
 
 static const struct imx_weim_devtype imx1_weim_devtype = {
@@ -41,6 +42,7 @@ static const struct imx_weim_devtype imx50_weim_devtype = {
 	.cs_stride	= 0x18,
 	.wcr_offset	= 0x90,
 	.wcr_bcm	= BIT(0),
+	.wcr_cont_bclk	= BIT(3),
 };
 
 static const struct imx_weim_devtype imx51_weim_devtype = {
@@ -206,8 +208,20 @@ static int weim_parse_dt(struct platform_device *pdev, void __iomem *base)
 	if (of_property_read_bool(pdev->dev.of_node, "fsl,burst-clk-enable")) {
 		if (devtype->wcr_bcm) {
 			reg = readl(base + devtype->wcr_offset);
-			writel(reg | devtype->wcr_bcm,
-				base + devtype->wcr_offset);
+			reg |= devtype->wcr_bcm;
+
+			if (of_property_read_bool(pdev->dev.of_node,
+						"fsl,continuous-burst-clk")) {
+				if (devtype->wcr_cont_bclk) {
+					reg |= devtype->wcr_cont_bclk;
+				} else {
+					dev_err(&pdev->dev,
+						"continuous burst clk not supported.\n");
+					return -EINVAL;
+				}
+			}
+
+			writel(reg, base + devtype->wcr_offset);
 		} else {
 			dev_err(&pdev->dev, "burst clk mode not supported.\n");
 			return -EINVAL;

drivers/soc/imx/gpcv2.c

@@ -377,7 +377,7 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
 		}
 	}
 
-	pm_runtime_put(domain->dev);
+	pm_runtime_put_sync_suspend(domain->dev);
 
 	return 0;
 
@@ -734,6 +734,7 @@ static const struct imx_pgc_domain imx8mm_pgc_domains[] = {
 			.map = IMX8MM_VPUH1_A53_DOMAIN,
 		},
 		.pgc   = BIT(IMX8MM_PGC_VPUH1),
+		.keep_clocks = true,
 	},
 
 	[IMX8MM_POWER_DOMAIN_DISPMIX] = {
@@ -840,6 +841,32 @@ static const struct imx_pgc_domain imx8mn_pgc_domains[] = {
 			.hskack = IMX8MN_GPUMIX_HSK_PWRDNACKN,
 		},
 		.pgc   = BIT(IMX8MN_PGC_GPUMIX),
+		.keep_clocks = true,
+	},
+
+	[IMX8MN_POWER_DOMAIN_DISPMIX] = {
+		.genpd = {
+			.name = "dispmix",
+		},
+			.bits  = {
+			.pxx = IMX8MN_DISPMIX_SW_Pxx_REQ,
+			.map = IMX8MN_DISPMIX_A53_DOMAIN,
+			.hskreq = IMX8MN_DISPMIX_HSK_PWRDNREQN,
+			.hskack = IMX8MN_DISPMIX_HSK_PWRDNACKN,
+		},
+		.pgc   = BIT(IMX8MN_PGC_DISPMIX),
+		.keep_clocks = true,
+	},
+
+	[IMX8MN_POWER_DOMAIN_MIPI] = {
+		.genpd = {
+			.name = "mipi",
+		},
+			.bits  = {
+			.pxx = IMX8MN_MIPI_SW_Pxx_REQ,
+			.map = IMX8MN_MIPI_A53_DOMAIN,
+		},
+		.pgc   = BIT(IMX8MN_PGC_MIPI),
 	},
 };
 

drivers/soc/imx/imx8m-blk-ctrl.c

@@ -14,6 +14,7 @@
 #include <linux/clk.h>
 
 #include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/power/imx8mn-power.h>
 
 #define BLK_SFT_RSTN	0x0
 #define BLK_CLK_EN	0x4
@@ -498,6 +499,77 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
 	.num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
 };
 
+
+static int imx8mn_disp_power_notifier(struct notifier_block *nb,
+				      unsigned long action, void *data)
+{
+	struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+						 power_nb);
+
+	if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+		return NOTIFY_OK;
+
+	/* Enable bus clock and deassert bus reset */
+	regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
+	regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
+
+	/*
+	 * On power up we have no software backchannel to the GPC to
+	 * wait for the ADB handshake to happen, so we just delay for a
+	 * bit. On power down the GPC driver waits for the handshake.
+	 */
+	if (action == GENPD_NOTIFY_ON)
+		udelay(5);
+
+
+	return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
+	[IMX8MN_DISPBLK_PD_MIPI_DSI] = {
+		.name = "dispblk-mipi-dsi",
+		.clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
+		.num_clks = 2,
+		.gpc_name = "mipi-dsi",
+		.rst_mask = BIT(0) | BIT(1),
+		.clk_mask = BIT(0) | BIT(1),
+		.mipi_phy_rst_mask = BIT(17),
+	},
+	[IMX8MN_DISPBLK_PD_MIPI_CSI] = {
+		.name = "dispblk-mipi-csi",
+		.clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
+		.num_clks = 2,
+		.gpc_name = "mipi-csi",
+		.rst_mask = BIT(2) | BIT(3),
+		.clk_mask = BIT(2) | BIT(3),
+		.mipi_phy_rst_mask = BIT(16),
+	},
+	[IMX8MN_DISPBLK_PD_LCDIF] = {
+		.name = "dispblk-lcdif",
+		.clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
+		.num_clks = 3,
+		.gpc_name = "lcdif",
+		.rst_mask = BIT(4) | BIT(5),
+		.clk_mask = BIT(4) | BIT(5),
+	},
+	[IMX8MN_DISPBLK_PD_ISI] = {
+		.name = "dispblk-isi",
+		.clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
+						"disp_apb_root"},
+		.num_clks = 4,
+		.gpc_name = "isi",
+		.rst_mask = BIT(6) | BIT(7),
+		.clk_mask = BIT(6) | BIT(7),
+	},
+};
+
+static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
+	.max_reg = 0x84,
+	.power_notifier_fn = imx8mn_disp_power_notifier,
+	.domains = imx8mn_disp_blk_ctl_domain_data,
+	.num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
+};
+
 static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
 	{
 		.compatible = "fsl,imx8mm-vpu-blk-ctrl",
@@ -505,7 +577,10 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
 	}, {
 		.compatible = "fsl,imx8mm-disp-blk-ctrl",
 		.data = &imx8mm_disp_blk_ctl_dev_data
-	} ,{
+	}, {
+		.compatible = "fsl,imx8mn-disp-blk-ctrl",
+		.data = &imx8mn_disp_blk_ctl_dev_data
+	}, {
 		/* Sentinel */
 	}
 };

include/dt-bindings/power/imx8mn-power.h

@@ -12,4 +12,9 @@
 #define IMX8MN_POWER_DOMAIN_DISPMIX	3
 #define IMX8MN_POWER_DOMAIN_MIPI	4
 
+#define IMX8MN_DISPBLK_PD_MIPI_DSI	0
+#define IMX8MN_DISPBLK_PD_MIPI_CSI	1
+#define IMX8MN_DISPBLK_PD_LCDIF	2
+#define IMX8MN_DISPBLK_PD_ISI	3
+
 #endif