Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new IIO device support, features and cleanup for the 5.8 cycle

Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)

New device support
* ad7476
  - Add ad7091 support (ID only)
* ad9467
  - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
  - New driver to support ADIs generic AXI ADC IP core, used to provide
    high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
    paired with a device using a slow configuration interface (spi etc)
    Includes DT bindings and some fixes for fpga headers.
* bmg160
  - Add support for BMI088 (ID only)
* max1241
  - New driver for this ADC.
* st_sensors
  - Add support for LIS2HH12 accelerometer
* sx9310
  - New driver supporting sx9310 and sx9311 proximity sensors.

Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000

Features
* st_lsm6dsx
  - Add LIS3MDL as a possible sensor hub device.
* vcnl4000
  - Add new concept of near level (from DT) to provide to userspace which
    often needs to have some calibrated concept of 'near'.

Cleanups, minor fixes etc.
* core
  - Use snprintf for functions where strings are built and there is
    potential for overflow.
  - Correct docs to indicate mlock should not be used directly by drivers.
  - Fix up accidental dropping of a patch to use bitmap_zalloc.
  - Stop allowing enabling of buffers with no channels enabled.
  - Drop unused 'stufftoread' from iio_buffer.
  - Drop scan_el_attrs form iio_buffer as unused.
  - Reorder sanity checks in __iio_device_register to fail earlier.
  - Drop all the devm_ runregister / free functions from IIO as they
    were never used and encourage poor design.
* dma-buffer
  - Tidy up includes.
* dma-engine-buffer
  - Provide dev-managed allocator.
  - Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
  - Replace some unnecessary casts of error ptrs and whilst there.
    use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
  - Drop casts in calls to regmap_bulk_read as they make no sense.
  - Use devm_platform_ioremap_resource to reduce boilerplate.
  - Fix typos in Analog Devices.
* counters/104-quad
  - Add Syed Nayyar Waris as an additional maintainer.
* ad7476
  - Generate CONVST signal internally rather than requiring external
    trigger.  Add sysfs read back as can now do so.
  - use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
  - Switch to read_avail from explicit attribute. Mostly done to avoid
    confusing people with a - sign (without surounding spaces) that
    was correct but checkpatch didn't like.
* adis library
  - Add missing newlines at end of error messages.
* adis16400
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
  - Move some channel definitions into individual drivers to avoid
    having to deal with complex options.
* ak8974
  - Silence an error on deffered probe.
* bmp280
  - Harden against IRQ before registration.
  - Convert to read_avail instead of opencoding the equivalent.
  - Explicitly mark GPIO as optional.
  - Cleanup casts.
  - Remove line breaks from strings.
* htts221
  - Replace direct access to platform_data with dev_get_platdata().
  - Use device properties rather than device tree ones to allow ACPI
    probing.
  - Casting cleanups.
* intel_mrfld_adc
  - Don't use unaligned accessor for aligned data.
* isl29125
  - Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
  - Remove comp to bool.
* max1363
  - Stop using mlock from the iio_dev directly in favour of a local lock
    with clearly defined scope.
* max30100
  - Use generic device properties to allow ACPI probe.
* mpu6050
  - Convert to i2c_new_client_device.
  - Add debugfs register access.
* st_lsm6dsx
  - Provide means of configuring full scale on slave device if supported.
  - Drop include of st_sensors header to get one value. Its not otherwise
    used by this driver.
* st-sensors
  - Replace direct access to platform_data with dev_get_platdata().
  - Casting cleanups.
  - Avoid splitting strings.
* st_uvis25
  - Casting cleanups.
* tsl2563
  - Typo fix.
* tsl2772
  - scnprintf in a non obvious string building usecase. Note also 'fixes'
    a wrong calculation of remaining space that couldn't actually cause
    any trouble as there was lots of room.
* xilinx-xadc
  - Fix Lars-Peter spelling his own name wrong :) + additional typos.

* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
  iio: magnetometer: ak8974: Silence deferred-probe error
  Documentation: ABI: document IIO in_proximity_nearlevel file
  iio: vcnl4000: Export near level property for proximity sensor
  dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  dt-bindings: iio: Introduce common properties for iio sensors
  dt-bindings: iio: vcnl4000: convert bindings to YAML format
  iio: Fix misspellings of "Analog Devices"
  iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
  iio: adc: at91-adc: Use devm_platform_ioremap_resource
  iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
  iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
  iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
  iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
  iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
  iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
  iio: buffer: drop devm_iio_kfifo_free() API call
  iio: buffer: drop devm_iio_hw_consumer_free() API call
  ...

Documentation/ABI/testing/sysfs-bus-iio-proximity

@@ -0,0 +1,10 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_nearlevel
+Date:		March 2020
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Near level for proximity sensors. This is a single integer
+		value that tells user space when an object should be
+		considered close to the device. If the value read from the
+		sensor is above or equal to the value in this file an object
+		should typically be considered near.

Documentation/ABI/testing/sysfs-bus-iio-sx9310

@@ -0,0 +1,10 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity3_comb_raw
+Date:		February 2019
+KernelVersion:	5.6
+Contact:	Daniel Campello <campello@chromium.org>
+Description:
+		Proximity measurement indicating that some object is
+		near the combined sensor. The combined sensor presents
+		proximity measurements constructed by hardware by
+		combining measurements taken from a given set of
+		physical sensors.

Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml

@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9467 High-Speed ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital
+  converter (ADC).
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad9467
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  powerdown-gpios:
+    description:
+      Pin that controls the powerdown mode of the device.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reset pin for the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad9467";
+          reg = <0>;
+          clocks = <&adc_clk>;
+          clock-names = "adc-clk";
+        };
+    };
+...

Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI ADC IP core
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  Analog Devices Generic AXI ADC IP core for interfacing an ADC device
+  with a high speed serial (JESD204B/C) or source synchronous parallel
+  interface (LVDS/CMOS).
+  Usually, some other interface type (i.e SPI) is used as a control
+  interface for the actual ADC, while this IP core will interface
+  to the data-lines of the ADC and handle the streaming of data into
+  memory via DMA.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-adc-10.0.a
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  adi,adc-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A reference to a the actual ADC to which this FPGA ADC interfaces to.
+
+required:
+  - compatible
+  - dmas
+  - reg
+  - adi,adc-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    axi-adc@44a00000 {
+          compatible = "adi,axi-adc-10.0.a";
+          reg = <0x44a00000 0x10000>;
+          dmas = <&rx_dma 0>;
+          dma-names = "rx";
+
+          adi,adc-dev = <&spi_adc>;
+    };
+...

Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Alexandru Lazar
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1241 12-bit, single-channel analog to digital converter
+
+maintainers:
+  - Alexandru Lazar <alazar@startmail.com>
+
+description: |
+  Bindings for the max1241 12-bit, single-channel ADC device. Datasheet
+  can be found at:
+    https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1241
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Device tree identifier of the regulator that powers the ADC.
+
+  vref-supply:
+    description:
+      Device tree identifier of the regulator that provides the external
+      reference voltage.
+
+  shutdown-gpios:
+    description:
+      GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If
+      specified, the /SHDN pin will be asserted between conversions,
+      thus enabling power-down mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vref-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1241";
+            reg = <0>;
+            vdd-supply = <&adc_vdd>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+            shutdown-gpios = <&gpio 26 1>;
+        };
+    };

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -1,37 +0,0 @@
-Rockchip Successive Approximation Register (SAR) A/D Converter bindings
-
-Required properties:
-- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc"
-   - "rockchip,saradc": for rk3188, rk3288
-   - "rockchip,rk3066-tsadc": for rk3036
-   - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328
-   - "rockchip,rk3399-saradc": for rk3399
-   - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108
-
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-              depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for
-               the peripheral clock.
-- vref-supply: The regulator supply ADC reference voltage.
-- #io-channel-cells: Should be 1, see ../iio-bindings.txt
-
-Optional properties:
-- resets: Must contain an entry for each entry in reset-names if need support
-	  this option. See ../reset/reset.txt for details.
-- reset-names: Must include the name "saradc-apb".
-
-Example:
-	saradc: saradc@2006c000 {
-		compatible = "rockchip,saradc";
-		reg = <0x2006c000 0x100>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
-		clock-names = "saradc", "apb_pclk";
-		resets = <&cru SRST_SARADC>;
-		reset-names = "saradc-apb";
-		#io-channel-cells = <1>;
-		vref-supply = <&vcc18>;
-	};

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml

@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rockchip-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Successive Approximation Register (SAR) A/D Converter
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,saradc
+      - const: rockchip,rk3066-tsadc
+      - const: rockchip,rk3399-saradc
+      - items:
+          - enum:
+            - rockchip,px30-saradc
+            - rockchip,rk3308-saradc
+            - rockchip,rk3328-saradc
+            - rockchip,rv1108-saradc
+          - const: rockchip,rk3399-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: converter clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: saradc
+      - const: apb_pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: saradc-apb
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    saradc: saradc@2006c000 {
+      compatible = "rockchip,saradc";
+      reg = <0x2006c000 0x100>;
+      interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+      clock-names = "saradc", "apb_pclk";
+      resets = <&cru SRST_SARADC>;
+      reset-names = "saradc-apb";
+      vref-supply = <&vcc18>;
+      #io-channel-cells = <1>;
+    };

Documentation/devicetree/bindings/iio/common.yaml

@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for iio sensors
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Guido Günther <agx@sigxcpu.org>
+
+description: |
+  This document defines device tree properties common to several iio
+  sensors. It doesn't constitue a device tree binding specification by itself but
+  is meant to be referenced by device tree bindings.
+
+  When referenced from sensor tree bindings the properties defined in this
+  document are defined as follows. The sensor tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  proximity-near-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      For proximity sensors whether an object can be considered near to the
+      device depends on parameters like sensor position, covering glass and
+      aperture. This value gives an indication to userspace for which
+      sensor readings this is the case.
+
+      Raw proximity values equal or above this level should be
+      considered 'near' to the device (an object is near to the
+      sensor).
+
+...

Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt

@@ -1,63 +0,0 @@
-STMicroelectronics STM32 DAC
-
-The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
-may be configured in 8 or 12-bit mode. It has two output channels, each with
-its own converter.
-It has built-in noise and triangle waveform generator and supports external
-triggers for conversions. The DAC's output buffer allows a high drive output
-current.
-
-Contents of a stm32 dac root node:
------------------------------------
-Required properties:
-- compatible: Should be one of:
-  "st,stm32f4-dac-core"
-  "st,stm32h7-dac-core"
-- reg: Offset and length of the device's register set.
-- clocks: Must contain an entry for pclk (which feeds the peripheral bus
-  interface)
-- clock-names: Must be "pclk".
-- vref-supply: Phandle to the vref+ input analog reference supply.
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- A pinctrl state named "default" for each DAC channel may be defined to set
-  DAC_OUTx pin in mode of operation for analog output on external pin.
-
-Contents of a stm32 dac child node:
------------------------------------
-DAC core node should contain at least one subnode, representing a
-DAC instance/channel available on the machine.
-
-Required properties:
-- compatible: Must be "st,stm32-dac".
-- reg: Must be either 1 or 2, to define (single) channel in use
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
-  Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-Example:
-	dac: dac@40007400 {
-		compatible = "st,stm32h7-dac-core";
-		reg = <0x40007400 0x400>;
-		clocks = <&clk>;
-		clock-names = "pclk";
-		vref-supply = <&reg_vref>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dac_out1 &dac_out2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dac1: dac@1 {
-			compatible = "st,stm32-dac";
-			#io-channels-cells = <1>;
-			reg = <1>;
-		};
-
-		dac2: dac@2 {
-			compatible = "st,stm32-dac";
-			#io-channels-cells = <1>;
-			reg = <2>;
-		};
-	};

Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml

@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 DAC bindings
+
+description: |
+  The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+  may be configured in 8 or 12-bit mode. It has two output channels, each with
+  its own converter.
+  It has built-in noise and triangle waveform generator and supports external
+  triggers for conversions. The DAC's output buffer allows a high drive output
+  current.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-dac-core
+      - st,stm32h7-dac-core
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^dac@[1-2]+$":
+    type: object
+    description:
+      A DAC block node should contain at least one subnode, representing an
+      DAC instance/channel available on the machine.
+
+    properties:
+      compatible:
+        const: st,stm32-dac
+
+      reg:
+        description: Must be either 1 or 2, to define (single) channel in use
+        enum: [1, 2]
+
+      '#io-channel-cells':
+        const: 1
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - '#io-channel-cells'
+
+examples:
+  - |
+    // Example on stm32mp157c
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dac: dac@40017000 {
+      compatible = "st,stm32h7-dac-core";
+      reg = <0x40017000 0x400>;
+      clocks = <&rcc DAC12>;
+      clock-names = "pclk";
+      vref-supply = <&vref>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@1 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <1>;
+      };
+
+      dac@2 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <2>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt

@@ -2,7 +2,7 @@
 
 Required properties:
 
-  - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro"
+  - compatible : should be "bosch,bmg160", "bosch,bmi055_gyro" or "bosch,bmi088_gyro"
   - reg : the I2C address of the sensor (0x69)
 
 Optional properties:

Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS TAOS TSL2563 ambient light sensor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Ambient light sensor with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2560
+      - amstaos,tsl2561
+      - amstaos,tsl2562
+      - amstaos,tsl2563
+
+  reg:
+    maxItems: 1
+
+  amstaos,cover-comp-gain:
+    description: Multiplier for gain compensation
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [1, 16]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@29 {
+        compatible = "amstaos,tsl2563";
+        reg = <0x29>;
+        amstaos,cover-comp-gain = <16>;
+      };
+    };
+...

Documentation/devicetree/bindings/iio/light/tsl2563.txt

@@ -1,19 +0,0 @@
-* AMS TAOS TSL2563 ambient light sensor
-
-Required properties:
-
-  - compatible : should be "amstaos,tsl2563"
-  - reg : the I2C address of the sensor
-
-Optional properties:
-
-  - amstaos,cover-comp-gain : integer used as multiplier for gain
-                              compensation (default = 1)
-
-Example:
-
-tsl2563@29 {
-	compatible = "amstaos,tsl2563";
-	reg = <0x29>;
-	amstaos,cover-comp-gain = <16>;
-};

Documentation/devicetree/bindings/iio/light/vcnl4000.txt

@@ -1,24 +0,0 @@
-VISHAY VCNL4000 -  Ambient Light and proximity sensor
-
-This driver supports the VCNL4000/10/20/40 and VCNL4200 chips
-
-Required properties:
-
-	-compatible: must be one of :
-        vishay,vcnl4000
-        vishay,vcnl4010
-        vishay,vcnl4020
-        vishay,vcnl4040
-        vishay,vcnl4200
-
-	-reg: I2C address of the sensor, should be one from below based on the model:
-        0x13
-        0x51
-        0x60
-
-Example:
-
-light-sensor@51 {
-	compatible = "vishay,vcnl4200";
-	reg = <0x51>;
-};

Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VISHAY VCNL4000 ambient light and proximity sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+  Ambient light sensing with proximity detection over an i2c
+  interface.
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl4000
+      - vishay,vcnl4010
+      - vishay,vcnl4020
+      - vishay,vcnl4040
+      - vishay,vcnl4200
+  reg:
+    maxItems: 1
+
+  proximity-near-level: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+- |
+  i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@51 {
+              compatible = "vishay,vcnl4200";
+              reg = <0x51>;
+              proximity-near-level = <220>;
+      };
+  };
+...

Documentation/devicetree/bindings/iio/st-sensors.txt

@@ -50,6 +50,7 @@ Accelerometers:
 - st,lis3dhh
 - st,lis3de
 - st,lis2de12
+- st,lis2hh12
 
 Gyroscopes:
 - st,l3g4200d-gyro

Documentation/driver-api/driver-model/devres.rst

@@ -284,21 +284,13 @@ I2C
 
 IIO
   devm_iio_device_alloc()
-  devm_iio_device_free()
   devm_iio_device_register()
-  devm_iio_device_unregister()
   devm_iio_kfifo_allocate()
-  devm_iio_kfifo_free()
   devm_iio_triggered_buffer_setup()
-  devm_iio_triggered_buffer_cleanup()
   devm_iio_trigger_alloc()
-  devm_iio_trigger_free()
   devm_iio_trigger_register()
-  devm_iio_trigger_unregister()
   devm_iio_channel_get()
-  devm_iio_channel_release()
   devm_iio_channel_get_all()
-  devm_iio_channel_release_all()
 
 INPUT
   devm_input_allocate_device()

Documentation/driver-api/iio/triggers.rst

@@ -4,9 +4,7 @@ Triggers
 
 * struct :c:type:`iio_trigger` — industrial I/O trigger device
 * :c:func:`devm_iio_trigger_alloc` — Resource-managed iio_trigger_alloc
-* :c:func:`devm_iio_trigger_free` — Resource-managed iio_trigger_free
 * :c:func:`devm_iio_trigger_register` — Resource-managed iio_trigger_register
-* :c:func:`devm_iio_trigger_unregister` — Resource-managed
   iio_trigger_unregister
 * :c:func:`iio_trigger_validate_own_device` — Check if a trigger and IIO
   device belong to the same device

MAINTAINERS

@@ -294,6 +294,7 @@ F:	drivers/gpio/gpio-104-idio-16.c
 
 ACCES 104-QUAD-8 DRIVER
 M:	William Breathitt Gray <vilhelm.gray@gmail.com>
+M:	Syed Nayyar Waris <syednwaris@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-counter-104-quad-8

drivers/iio/accel/Kconfig

@@ -238,7 +238,7 @@ config IIO_ST_ACCEL_3AXIS
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
 	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
-	  LNG2DM, LIS3DE, LIS2DE12
+	  LNG2DM, LIS3DE, LIS2DE12, LIS2HH12
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created: