Merge branch 'remotes/lorenzo/pci/dwc'

- Add intel-gw driver for PCIe host controller on Intel Gateway SoC
    (Dilip Kota)

  - Use shared DesignWare helpers to configure Fast Training Sequence (FTS)
    in artpec6 (Dilip Kota)

* remotes/lorenzo/pci/dwc:
  PCI: artpec6: Configure FTS with dwc helper function
  PCI: dwc: intel: PCIe RC controller driver
  dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller

Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml

@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-pcie
+      - const: snps,dw-pcie
+
+  device_type:
+    const: pci
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe configuration registers.
+      - description: Controller application registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: app
+
+  ranges:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,pci-domain: true
+
+  num-lanes:
+    maximum: 2
+    description: Number of lanes to use for this port.
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-map-mask:
+    description: Standard PCI IRQ mapping properties.
+
+  interrupt-map:
+    description: Standard PCI IRQ mapping properties.
+
+  max-link-speed:
+    description: Specify PCI Gen for link capability.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 1, 2, 3, 4 ]
+      - default: 1
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  reset-assert-ms:
+    description: |
+      Delay after asserting reset to the PCIe device.
+    maximum: 500
+    default: 100
+
+required:
+  - compatible
+  - device_type
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - reg-names
+  - ranges
+  - resets
+  - clocks
+  - phys
+  - phy-names
+  - reset-gpios
+  - '#interrupt-cells'
+  - interrupt-map
+  - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/intel,lgm-clk.h>
+    pcie10: pcie@d0e00000 {
+      compatible = "intel,lgm-pcie", "snps,dw-pcie";
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xd0e00000 0x1000>,
+            <0xd2000000 0x800000>,
+            <0xd0a41000 0x1000>;
+      reg-names = "dbi", "config", "app";
+      linux,pci-domain = <0>;
+      max-link-speed = <4>;
+      bus-range = <0x00 0x08>;
+      interrupt-parent = <&ioapic1>;
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+                      <0 0 0 2 &ioapic1 28 1>,
+                      <0 0 0 3 &ioapic1 29 1>,
+                      <0 0 0 4 &ioapic1 30 1>;
+      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+      resets = <&rcu0 0x50 0>;
+      clocks = <&cgu0 LGM_GCLK_PCIE10>;
+      phys = <&cb0phy0>;
+      phy-names = "pcie";
+      reset-assert-ms = <500>;
+      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+      num-lanes = <2>;
+    };

drivers/pci/controller/dwc/Kconfig

@@ -209,6 +209,17 @@ config PCIE_ARTPEC6_EP
 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
 	  endpoint mode. This uses the DesignWare core.
 
+config PCIE_INTEL_GW
+	bool "Intel Gateway PCIe host controller support"
+	depends on OF && (X86 || COMPILE_TEST)
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW_HOST
+	help
+	  Say 'Y' here to enable PCIe Host controller support on Intel
+	  Gateway SoCs.
+	  The PCIe controller uses the DesignWare core plus Intel-specific
+	  hardware wrappers.
+
 config PCIE_KIRIN
 	depends on OF && (ARM64 || COMPILE_TEST)
 	bool "HiSilicon Kirin series SoCs PCIe controllers"

drivers/pci/controller/dwc/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
+obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
 obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
 obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
 obj-$(CONFIG_PCI_MESON) += pci-meson.o

drivers/pci/controller/dwc/pcie-artpec6.c

@@ -51,9 +51,6 @@ static const struct of_device_id artpec6_pcie_of_match[];
 #define ACK_N_FTS_MASK			GENMASK(15, 8)
 #define ACK_N_FTS(x)			(((x) << 8) & ACK_N_FTS_MASK)
 
-#define FAST_TRAINING_SEQ_MASK		GENMASK(7, 0)
-#define FAST_TRAINING_SEQ(x)		(((x) << 0) & FAST_TRAINING_SEQ_MASK)
-
 /* ARTPEC-6 specific registers */
 #define PCIECFG				0x18
 #define  PCIECFG_DBG_OEN		BIT(24)
@@ -313,10 +310,7 @@ static void artpec6_pcie_set_nfts(struct artpec6_pcie *artpec6_pcie)
 	 * Set the Number of Fast Training Sequences that the core
 	 * advertises as its N_FTS during Gen2 or Gen3 link training.
 	 */
-	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-	val &= ~FAST_TRAINING_SEQ_MASK;
-	val |= FAST_TRAINING_SEQ(180);
-	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+	dw_pcie_link_set_n_fts(pci, 180);
 }
 
 static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)

drivers/pci/controller/dwc/pcie-designware.c

@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/types.h>
 
+#include "../../pci.h"
 #include "pcie-designware.h"
 
 /*
@@ -474,6 +475,61 @@ int dw_pcie_link_up(struct dw_pcie *pci)
 		(!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
 }
 
+void dw_pcie_upconfig_setup(struct dw_pcie *pci)
+{
+	u32 val;
+
+	val = dw_pcie_readl_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL);
+	val |= PORT_MLTI_UPCFG_SUPPORT;
+	dw_pcie_writel_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL, val);
+}
+EXPORT_SYMBOL_GPL(dw_pcie_upconfig_setup);
+
+void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
+{
+	u32 reg, val;
+	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+
+	reg = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2);
+	reg &= ~PCI_EXP_LNKCTL2_TLS;
+
+	switch (pcie_link_speed[link_gen]) {
+	case PCIE_SPEED_2_5GT:
+		reg |= PCI_EXP_LNKCTL2_TLS_2_5GT;
+		break;
+	case PCIE_SPEED_5_0GT:
+		reg |= PCI_EXP_LNKCTL2_TLS_5_0GT;
+		break;
+	case PCIE_SPEED_8_0GT:
+		reg |= PCI_EXP_LNKCTL2_TLS_8_0GT;
+		break;
+	case PCIE_SPEED_16_0GT:
+		reg |= PCI_EXP_LNKCTL2_TLS_16_0GT;
+		break;
+	default:
+		/* Use hardware capability */
+		val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+		val = FIELD_GET(PCI_EXP_LNKCAP_SLS, val);
+		reg &= ~PCI_EXP_LNKCTL2_HASD;
+		reg |= FIELD_PREP(PCI_EXP_LNKCTL2_TLS, val);
+		break;
+	}
+
+	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL2, reg);
+}
+EXPORT_SYMBOL_GPL(dw_pcie_link_set_max_speed);
+
+void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts)
+{
+	u32 val;
+
+	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+	val &= ~PORT_LOGIC_N_FTS_MASK;
+	val |= n_fts & PORT_LOGIC_N_FTS_MASK;
+	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+}
+EXPORT_SYMBOL_GPL(dw_pcie_link_set_n_fts);
+
 static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
 {
 	u32 val;

drivers/pci/controller/dwc/pcie-designware.h

@@ -30,7 +30,12 @@
 #define LINK_WAIT_IATU			9
 
 /* Synopsys-specific PCIe configuration registers */
+#define PCIE_PORT_AFR			0x70C
+#define PORT_AFR_N_FTS_MASK		GENMASK(15, 8)
+#define PORT_AFR_CC_N_FTS_MASK		GENMASK(23, 16)
+
 #define PCIE_PORT_LINK_CONTROL		0x710
+#define PORT_LINK_DLL_LINK_EN		BIT(5)
 #define PORT_LINK_MODE_MASK		GENMASK(21, 16)
 #define PORT_LINK_MODE(n)		FIELD_PREP(PORT_LINK_MODE_MASK, n)
 #define PORT_LINK_MODE_1_LANES		PORT_LINK_MODE(0x1)
@@ -46,6 +51,7 @@
 #define PCIE_PORT_DEBUG1_LINK_IN_TRAINING	BIT(29)
 
 #define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
+#define PORT_LOGIC_N_FTS_MASK		GENMASK(7, 0)
 #define PORT_LOGIC_SPEED_CHANGE		BIT(17)
 #define PORT_LOGIC_LINK_WIDTH_MASK	GENMASK(12, 8)
 #define PORT_LOGIC_LINK_WIDTH(n)	FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n)
@@ -60,6 +66,9 @@
 #define PCIE_MSI_INTR0_MASK		0x82C
 #define PCIE_MSI_INTR0_STATUS		0x830
 
+#define PCIE_PORT_MULTI_LANE_CTRL	0x8C0
+#define PORT_MLTI_UPCFG_SUPPORT		BIT(7)
+
 #define PCIE_ATU_VIEWPORT		0x900
 #define PCIE_ATU_REGION_INBOUND		BIT(31)
 #define PCIE_ATU_REGION_OUTBOUND	0
@@ -273,6 +282,9 @@ void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val);
 u32 dw_pcie_read_atu(struct dw_pcie *pci, u32 reg, size_t size);
 void dw_pcie_write_atu(struct dw_pcie *pci, u32 reg, size_t size, u32 val);
 int dw_pcie_link_up(struct dw_pcie *pci);
+void dw_pcie_upconfig_setup(struct dw_pcie *pci);
+void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen);
+void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts);
 int dw_pcie_wait_for_link(struct dw_pcie *pci);
 void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
 			       int type, u64 cpu_addr, u64 pci_addr,

include/uapi/linux/pci_regs.h

@@ -676,6 +676,7 @@
 #define  PCI_EXP_LNKCTL2_TLS_32_0GT	0x0005 /* Supported Speed 32GT/s */
 #define  PCI_EXP_LNKCTL2_ENTER_COMP	0x0010 /* Enter Compliance */
 #define  PCI_EXP_LNKCTL2_TX_MARGIN	0x0380 /* Transmit Margin */
+#define  PCI_EXP_LNKCTL2_HASD		0x0020 /* HW Autonomous Speed Disable */
 #define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
 #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	52	/* v2 endpoints with link end here */
 #define PCI_EXP_SLTCAP2		52	/* Slot Capabilities 2 */