Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED updates from Bryan Wu:
 "This cycle we got:
   - new driver for leds-mc13783
   - bug fixes
   - code cleanup"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: make sure we unregister a trigger only once
  leds: leds-pwm: properly clean up after probe failure
  leds: clevo-mail: Make probe function __init
  leds-ot200: Fix dependencies
  leds-gpio: of: introduce MODULE_DEVICE_TABLE for module autoloading
  leds: clevo-mail: remove __initdata marker
  leds: leds-ss4200: remove __initdata marker
  leds: blinkm: remove unnecessary spaces
  leds: lp5562: remove unnecessary parentheses
  leds: leds-ss4200: remove DEFINE_PCI_DEVICE_TABLE macro
  leds: leds-s3c24xx: Trivial cleanup in header file
  drivers/leds: delete non-required instances of include <linux/init.h>
  leds: leds-gpio: add retain-state-suspended property
  leds: leds-mc13783: Add devicetree support
  leds: leds-mc13783: Remove unnecessary cleaning of registers on exit
  leds: leds-mc13783: Use proper "max_brightness" value fo LEDs
  leds: leds-mc13783: Use LED core PM functions
  leds: leds-mc13783: Add MC34708 LED support
  leds: Turn off led if blinking is disabled
  ledtrig-cpu: Handle CPU hot(un)plugging

Documentation/devicetree/bindings/leds/leds-gpio.txt

@@ -21,6 +21,8 @@ LED sub-node properties:
   on).  The "keep" setting will keep the LED at whatever its current
   state is, without producing a glitch.  The default is off if this
   property is not present.
+- retain-state-suspended: (optional) The suspend state can be retained.Such
+  as charge-led gpio.
 
 Examples:
 
@@ -50,3 +52,13 @@ run-control {
 		default-state = "on";
 	};
 };
+
+leds {
+	compatible = "gpio-leds";
+
+	charger-led {
+		gpios = <&gpio1 2 0>;
+		linux,default-trigger = "max8903-charger-charging";
+		retain-state-suspended;
+	};
+};

Documentation/devicetree/bindings/mfd/mc13xxx.txt

@@ -10,9 +10,44 @@ Optional properties:
 - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
 
 Sub-nodes:
+- leds : Contain the led nodes and initial register values in property
+  "led-control". Number of register depends of used IC, for MC13783 is 6,
+  for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
+  these registers.
+  - #address-cells: Must be 1.
+  - #size-cells: Must be 0.
+  Each led node should contain "reg", which used as LED ID (described below).
+  Optional properties "label" and "linux,default-trigger" is described in
+  Documentation/devicetree/bindings/leds/common.txt.
 - regulators : Contain the regulator nodes. The regulators are bound using
   their names as listed below with their registers and bits for enabling.
 
+MC13783 LED IDs:
+    0  : Main display
+    1  : AUX display
+    2  : Keypad
+    3  : Red 1
+    4  : Green 1
+    5  : Blue 1
+    6  : Red 2
+    7  : Green 2
+    8  : Blue 2
+    9  : Red 3
+    10 : Green 3
+    11 : Blue 3
+
+MC13892 LED IDs:
+    0  : Main display
+    1  : AUX display
+    2  : Keypad
+    3  : Red
+    4  : Green
+    5  : Blue
+
+MC34708 LED IDs:
+    0  : Charger Red
+    1  : Charger Green
+
 MC13783 regulators:
     sw1a      : regulator SW1A      (register 24, bit 0)
     sw1b      : regulator SW1B      (register 25, bit 0)
@@ -89,6 +124,18 @@ ecspi@70010000 { /* ECSPI1 */
 		interrupt-parent = <&gpio0>;
 		interrupts = <8>;
 
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x000 0x000 0x0e0 0x000>;
+
+			sysled {
+				reg = <3>;
+				label = "system:red:live";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+
 		regulators {
 			sw1_reg: mc13892__sw1 {
 				regulator-min-microvolt = <600000>;

drivers/leds/Kconfig

@@ -416,7 +416,7 @@ config LEDS_MC13783
 	depends on MFD_MC13XXX
 	help
 	  This option enable support for on-chip LED drivers found
-	  on Freescale Semiconductor MC13783/MC13892 PMIC.
+	  on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
 
 config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
@@ -474,7 +474,7 @@ config LEDS_LM355x
 
 config LEDS_OT200
 	tristate "LED support for the Bachmann OT200"
-	depends on LEDS_CLASS && HAS_IOMEM
+	depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
 	help
 	  This option enables support for the LEDs on the Bachmann OT200.
 	  Say Y to enable LEDs on the Bachmann OT200.

drivers/leds/led-core.c

@@ -39,9 +39,11 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 	led_cdev->blink_delay_on = delay_on;
 	led_cdev->blink_delay_off = delay_off;
 
-	/* never on - don't blink */
-	if (!delay_on)
+	/* never on - just set to off */
+	if (!delay_on) {
+		__led_set_brightness(led_cdev, LED_OFF);
 		return;
+	}
 
 	/* never off - just set to brightness */
 	if (!delay_off) {

drivers/leds/led-triggers.c

@@ -13,7 +13,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
@@ -220,9 +219,12 @@ void led_trigger_unregister(struct led_trigger *trig)
 {
 	struct led_classdev *led_cdev;
 
+	if (list_empty_careful(&trig->next_trig))
+		return;
+
 	/* Remove from the list of led triggers */
 	down_write(&triggers_list_lock);
-	list_del(&trig->next_trig);
+	list_del_init(&trig->next_trig);
 	up_write(&triggers_list_lock);
 
 	/* Remove anyone actively using this trigger */

drivers/leds/leds-88pm860x.c

@@ -11,7 +11,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>

drivers/leds/leds-adp5520.c

@@ -15,7 +15,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/workqueue.h>

drivers/leds/leds-asic3.c

@@ -7,7 +7,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/slab.h>

drivers/leds/leds-blinkm.c

@@ -18,7 +18,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
@@ -444,7 +443,7 @@ static void led_work(struct work_struct *work)
 {
 	int ret;
 	struct blinkm_led *led;
-	struct blinkm_data *data ;
+	struct blinkm_data *data;
 	struct blinkm_work *blm_work = work_to_blmwork(work);
 
 	led = blm_work->blinkm_led;

drivers/leds/leds-clevo-mail.c

@@ -19,7 +19,7 @@ MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>");
 MODULE_DESCRIPTION("Clevo mail LED driver");
 MODULE_LICENSE("GPL");
 
-static bool __initdata nodetect;
+static bool nodetect;
 module_param_named(nodetect, nodetect, bool, 0);
 MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
 
@@ -153,7 +153,7 @@ static struct led_classdev clevo_mail_led = {
 	.flags			= LED_CORE_SUSPENDRESUME,
 };
 
-static int clevo_mail_led_probe(struct platform_device *pdev)
+static int __init clevo_mail_led_probe(struct platform_device *pdev)
 {
 	return led_classdev_register(&pdev->dev, &clevo_mail_led);
 }
@@ -165,7 +165,6 @@ static int clevo_mail_led_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver clevo_mail_led_driver = {
-	.probe		= clevo_mail_led_probe,
 	.remove		= clevo_mail_led_remove,
 	.driver		= {
 		.name		= KBUILD_MODNAME,

drivers/leds/leds-cobalt-qube.c

@@ -3,7 +3,6 @@
  *
  * Control the Cobalt Qube/RaQ front LED
  */
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/leds.h>

drivers/leds/leds-da903x.c

@@ -14,7 +14,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/workqueue.h>

drivers/leds/leds-da9052.c

@@ -14,7 +14,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/workqueue.h>

drivers/leds/leds-fsg.c

@@ -16,7 +16,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/module.h>

drivers/leds/leds-gpio.c

@@ -11,7 +11,6 @@
  *
  */
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
@@ -204,6 +203,9 @@ static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
 				led.default_state = LEDS_GPIO_DEFSTATE_OFF;
 		}
 
+		if (of_get_property(child, "retain-state-suspended", NULL))
+			led.retain_state_suspended = 1;
+
 		ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
 				      &pdev->dev, NULL);
 		if (ret < 0) {
@@ -224,6 +226,8 @@ static const struct of_device_id of_gpio_leds_match[] = {
 	{ .compatible = "gpio-leds", },
 	{},
 };
+
+MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
 #else /* CONFIG_OF_GPIO */
 static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
 {

drivers/leds/leds-hp6xx.c

@@ -12,7 +12,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <asm/hd64461.h>

drivers/leds/leds-lm3533.c

@@ -12,7 +12,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/leds.h>
 #include <linux/mfd/core.h>
 #include <linux/mutex.h>

drivers/leds/leds-lp5521.c

@@ -25,7 +25,6 @@
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
-#include <linux/init.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>

drivers/leds/leds-lp5523.c

@@ -25,7 +25,6 @@
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
-#include <linux/init.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>

drivers/leds/leds-lp5562.c

@@ -13,7 +13,6 @@
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
-#include <linux/init.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -347,9 +346,9 @@ static void lp5562_write_program_memory(struct lp55xx_chip *chip,
 /* check the size of program count */
 static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
 {
-	return (ptn->size_r >= LP5562_PROGRAM_LENGTH ||
-		ptn->size_g >= LP5562_PROGRAM_LENGTH ||
-		ptn->size_b >= LP5562_PROGRAM_LENGTH);
+	return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
+	       ptn->size_g >= LP5562_PROGRAM_LENGTH ||
+	       ptn->size_b >= LP5562_PROGRAM_LENGTH;
 }
 
 static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)