Merge branch 'akpm' (patches from Andrew Morton)

Merge misc fixes from Andrew Morton.

* emailed patches from Andrew Morton akpm@linux-foundation.org>:
  mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness
  mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
  MAINTAINERS: add and correct types of some "T:" entries
  MAINTAINERS: use tab for separator
  rapidio/tsi721: fix tasklet termination in dma channel release
  hfsplus: fix remount issue
  zram: avoid null access when fail to alloc meta
  sh: prefix sh-specific "CCR" and "CCR2" by "SH_"
  ocfs2: fix quota file corruption
  drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX
  kallsyms: fix absolute addresses for kASLR
  scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression
  mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking
  memcg: reparent charges of children before processing parent
  memcg: fix endless loop in __mem_cgroup_iter_next()
  lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock
  dma debug: account for cachelines and read-only mappings in overlap tracking
  mm: close PageTail race
  MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors

MAINTAINERS

@@ -73,7 +73,8 @@ Descriptions of section entries:
 	L: Mailing list that is relevant to this area
 	W: Web-page with status/info
 	Q: Patchwork web based patch tracking system site
-	T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit, topgit.
+	T: SCM tree type and location.
+	   Type is one of: git, hg, quilt, stgit, topgit
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -1612,11 +1613,11 @@ S:	Maintained
 F:	drivers/net/wireless/atmel*
 
 ATTO EXPRESSSAS SAS/SATA RAID SCSI DRIVER
-M:      Bradley Grove <linuxdrivers@attotech.com>
-L:      linux-scsi@vger.kernel.org
-W:      http://www.attotech.com
-S:      Supported
-F:      drivers/scsi/esas2r
+M:	Bradley Grove <linuxdrivers@attotech.com>
+L:	linux-scsi@vger.kernel.org
+W:	http://www.attotech.com
+S:	Supported
+F:	drivers/scsi/esas2r
 
 AUDIT SUBSYSTEM
 M:	Eric Paris <eparis@redhat.com>
@@ -2159,7 +2160,7 @@ F:	Documentation/zh_CN/
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
 M:	Peter Chen <Peter.Chen@freescale.com>
-T:	git://github.com/hzpeterchen/linux-usb.git
+T:	git git://github.com/hzpeterchen/linux-usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
@@ -2179,9 +2180,9 @@ S:	Supported
 F:	drivers/net/ethernet/cisco/enic/
 
 CISCO VIC LOW LATENCY NIC DRIVER
-M:      Upinder Malhi <umalhi@cisco.com>
-S:      Supported
-F:      drivers/infiniband/hw/usnic
+M:	Upinder Malhi <umalhi@cisco.com>
+S:	Supported
+F:	drivers/infiniband/hw/usnic
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
@@ -2378,20 +2379,20 @@ F:	drivers/cpufreq/arm_big_little.c
 F:	drivers/cpufreq/arm_big_little_dt.c
 
 CPUIDLE DRIVER - ARM BIG LITTLE
-M:      Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-M:      Daniel Lezcano <daniel.lezcano@linaro.org>
-L:      linux-pm@vger.kernel.org
-L:      linux-arm-kernel@lists.infradead.org
-T:      git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
-S:      Maintained
-F:      drivers/cpuidle/cpuidle-big_little.c
+M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M:	Daniel Lezcano <daniel.lezcano@linaro.org>
+L:	linux-pm@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+S:	Maintained
+F:	drivers/cpuidle/cpuidle-big_little.c
 
 CPUIDLE DRIVERS
 M:	Rafael J. Wysocki <rjw@rjwysocki.net>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-T:	git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 F:	drivers/cpuidle/*
 F:	include/linux/cpuidle.h
 
@@ -2458,9 +2459,9 @@ S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CW1200 WLAN driver
-M:     Solomon Peachy <pizza@shaftnet.org>
-S:     Maintained
-F:     drivers/net/wireless/cw1200/
+M:	Solomon Peachy <pizza@shaftnet.org>
+S:	Maintained
+F:	drivers/net/wireless/cw1200/
 
 CX18 VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
@@ -3095,6 +3096,8 @@ F:	fs/ecryptfs/
 
 EDAC-CORE
 M:	Doug Thompson <dougthompson@xmission.com>
+M:	Borislav Petkov <bp@alien8.de>
+M:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Supported
@@ -4914,7 +4917,7 @@ F:	drivers/staging/ktap/
 KCONFIG
 M:	"Yann E. MORIN" <yann.morin.1998@free.fr>
 L:	linux-kbuild@vger.kernel.org
-T:	git://gitorious.org/linux-kconfig/linux-kconfig
+T:	git git://gitorious.org/linux-kconfig/linux-kconfig
 S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
@@ -5471,11 +5474,11 @@ S:	Maintained
 F:	drivers/media/tuners/m88ts2022*
 
 MA901 MASTERKIT USB FM RADIO DRIVER
-M:      Alexey Klimov <klimov.linux@gmail.com>
-L:      linux-media@vger.kernel.org
-T:      git git://linuxtv.org/media_tree.git
-S:      Maintained
-F:      drivers/media/radio/radio-ma901.c
+M:	Alexey Klimov <klimov.linux@gmail.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/radio/radio-ma901.c
 
 MAC80211
 M:	Johannes Berg <johannes@sipsolutions.net>
@@ -5636,7 +5639,7 @@ F:	drivers/scsi/megaraid/
 
 MELLANOX ETHERNET DRIVER (mlx4_en)
 M:	Amir Vadai <amirv@mellanox.com>
-L: 	netdev@vger.kernel.org
+L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
@@ -5677,7 +5680,7 @@ F:	include/linux/mtd/
 F:	include/uapi/mtd/
 
 MEN A21 WATCHDOG DRIVER
-M:  	Johannes Thumshirn <johannes.thumshirn@men.de>
+M:	Johannes Thumshirn <johannes.thumshirn@men.de>
 L:	linux-watchdog@vger.kernel.org
 S:	Supported
 F:	drivers/watchdog/mena21_wdt.c
@@ -5733,20 +5736,20 @@ L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git://openfabrics.org/~eli/connect-ib.git
+T:	git git://openfabrics.org/~eli/connect-ib.git
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
 
 Mellanox MLX5 IB driver
-M:      Eli Cohen <eli@mellanox.com>
-L:      linux-rdma@vger.kernel.org
-W:      http://www.mellanox.com
-Q:      http://patchwork.kernel.org/project/linux-rdma/list/
-T:      git://openfabrics.org/~eli/connect-ib.git
-S:      Supported
-F:      include/linux/mlx5/
-F:      drivers/infiniband/hw/mlx5/
+M:	Eli Cohen <eli@mellanox.com>
+L:	linux-rdma@vger.kernel.org
+W:	http://www.mellanox.com
+Q:	http://patchwork.kernel.org/project/linux-rdma/list/
+T:	git git://openfabrics.org/~eli/connect-ib.git
+S:	Supported
+F:	include/linux/mlx5/
+F:	drivers/infiniband/hw/mlx5/
 
 MODULE SUPPORT
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -8700,17 +8703,17 @@ S:	Maintained
 F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
-M:      Zhang Rui <rui.zhang@intel.com>
-M:      Eduardo Valentin <eduardo.valentin@ti.com>
-L:      linux-pm@vger.kernel.org
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
-Q:      https://patchwork.kernel.org/project/linux-pm/list/
-S:      Supported
-F:      drivers/thermal/
-F:      include/linux/thermal.h
-F:      include/linux/cpu_cooling.h
-F:      Documentation/devicetree/bindings/thermal/
+M:	Zhang Rui <rui.zhang@intel.com>
+M:	Eduardo Valentin <eduardo.valentin@ti.com>
+L:	linux-pm@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
+Q:	https://patchwork.kernel.org/project/linux-pm/list/
+S:	Supported
+F:	drivers/thermal/
+F:	include/linux/thermal.h
+F:	include/linux/cpu_cooling.h
+F:	Documentation/devicetree/bindings/thermal/
 
 THINGM BLINK(1) USB RGB LED DRIVER
 M:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
@@ -9812,7 +9815,7 @@ ZR36067 VIDEO FOR LINUX DRIVER
 L:	mjpeg-users@lists.sourceforge.net
 L:	linux-media@vger.kernel.org
 W:	http://mjpeg.sourceforge.net/driver-zoran/
-T:	Mercurial http://linuxtv.org/hg/v4l-dvb
+T:	hg http://linuxtv.org/hg/v4l-dvb
 S:	Odd Fixes
 F:	drivers/media/pci/zoran/
 

arch/sh/include/cpu-sh2/cpu/cache.h

@@ -18,7 +18,7 @@
 #define SH_CACHE_ASSOC		8
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define CCR		0xffffffec
+#define SH_CCR		0xffffffec
 
 #define CCR_CACHE_CE	0x01	/* Cache enable */
 #define CCR_CACHE_WT	0x02    /* CCR[bit1=1,bit2=1] */

arch/sh/include/cpu-sh2a/cpu/cache.h

@@ -17,8 +17,8 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xfffc1000 /* CCR1 */
-#define CCR2		0xfffc1004
+#define SH_CCR		0xfffc1000 /* CCR1 */
+#define SH_CCR2		0xfffc1004
 
 /*
  * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not

arch/sh/include/cpu-sh3/cpu/cache.h

@@ -17,7 +17,7 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xffffffec	/* Address of Cache Control Register */
+#define SH_CCR		0xffffffec	/* Address of Cache Control Register */
 
 #define CCR_CACHE_CE	0x01	/* Cache Enable */
 #define CCR_CACHE_WT	0x02	/* Write-Through (for P0,U0,P3) (else writeback) */

arch/sh/include/cpu-sh4/cpu/cache.h

@@ -17,7 +17,7 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xff00001c	/* Address of Cache Control Register */
+#define SH_CCR		0xff00001c	/* Address of Cache Control Register */
 #define CCR_CACHE_OCE	0x0001	/* Operand Cache Enable */
 #define CCR_CACHE_WT	0x0002	/* Write-Through (for P0,U0,P3) (else writeback)*/
 #define CCR_CACHE_CB	0x0004	/* Copy-Back (for P1) (else writethrough) */

arch/sh/kernel/cpu/init.c

@@ -112,7 +112,7 @@ static void cache_init(void)
 	unsigned long ccr, flags;
 
 	jump_to_uncached();
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 
 	/*
 	 * At this point we don't know whether the cache is enabled or not - a
@@ -189,7 +189,7 @@ static void cache_init(void)
 
 	l2_cache_init();
 
-	__raw_writel(flags, CCR);
+	__raw_writel(flags, SH_CCR);
 	back_to_cached();
 }
 #else

arch/sh/mm/cache-debugfs.c

@@ -36,7 +36,7 @@ static int cache_seq_show(struct seq_file *file, void *iter)
 	 */
 	jump_to_uncached();
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	if ((ccr & CCR_CACHE_ENABLE) == 0) {
 		back_to_cached();
 

arch/sh/mm/cache-sh2.c

@@ -63,9 +63,9 @@ static void sh2__flush_invalidate_region(void *start, int size)
 	local_irq_save(flags);
 	jump_to_uncached();
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	ccr |= CCR_CACHE_INVALIDATE;
-	__raw_writel(ccr, CCR);
+	__raw_writel(ccr, SH_CCR);
 
 	back_to_cached();
 	local_irq_restore(flags);

arch/sh/mm/cache-sh2a.c

@@ -134,7 +134,8 @@ static void sh2a__flush_invalidate_region(void *start, int size)
 
 	/* If there are too many pages then just blow the cache */
 	if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
-		__raw_writel(__raw_readl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+		__raw_writel(__raw_readl(SH_CCR) | CCR_OCACHE_INVALIDATE,
+			     SH_CCR);
 	} else {
 		for (v = begin; v < end; v += L1_CACHE_BYTES)
 			sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
@@ -167,7 +168,8 @@ static void sh2a_flush_icache_range(void *args)
 	/* I-Cache invalidate */
 	/* If there are too many pages then just blow the cache */
 	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
-		__raw_writel(__raw_readl(CCR) | CCR_ICACHE_INVALIDATE, CCR);
+		__raw_writel(__raw_readl(SH_CCR) | CCR_ICACHE_INVALIDATE,
+			     SH_CCR);
 	} else {
 		for (v = start; v < end; v += L1_CACHE_BYTES)
 			sh2a_invalidate_line(CACHE_IC_ADDRESS_ARRAY, v);

arch/sh/mm/cache-sh4.c

@@ -133,9 +133,9 @@ static void flush_icache_all(void)
 	jump_to_uncached();
 
 	/* Flush I-cache */
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	ccr |= CCR_CACHE_ICI;
-	__raw_writel(ccr, CCR);
+	__raw_writel(ccr, SH_CCR);
 
 	/*
 	 * back_to_cached() will take care of the barrier for us, don't add

arch/sh/mm/cache-shx3.c

@@ -19,7 +19,7 @@ void __init shx3_cache_init(void)
 {
 	unsigned int ccr;
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 
 	/*
 	 * If we've got cache aliases, resolve them in hardware.
@@ -40,5 +40,5 @@ void __init shx3_cache_init(void)
 	ccr |= CCR_CACHE_IBE;
 #endif
 
-	writel_uncached(ccr, CCR);
+	writel_uncached(ccr, SH_CCR);
 }

arch/sh/mm/cache.c

@@ -285,8 +285,8 @@ void __init cpu_cache_init(void)
 {
 	unsigned int cache_disabled = 0;
 
-#ifdef CCR
-	cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+#ifdef SH_CCR
+	cache_disabled = !(__raw_readl(SH_CCR) & CCR_CACHE_ENABLE);
 #endif
 
 	compute_alias(&boot_cpu_data.icache);

drivers/block/aoe/aoecmd.c

@@ -874,7 +874,7 @@ bio_pageinc(struct bio *bio)
 		/* Non-zero page count for non-head members of
 		 * compound pages is no longer allowed by the kernel.
 		 */
-		page = compound_trans_head(bv.bv_page);
+		page = compound_head(bv.bv_page);
 		atomic_inc(&page->_count);
 	}
 }
@@ -887,7 +887,7 @@ bio_pagedec(struct bio *bio)
 	struct bvec_iter iter;
 
 	bio_for_each_segment(bv, bio, iter) {
-		page = compound_trans_head(bv.bv_page);
+		page = compound_head(bv.bv_page);
 		atomic_dec(&page->_count);
 	}
 }

drivers/block/zram/zram_drv.c

@@ -612,6 +612,8 @@ static ssize_t disksize_store(struct device *dev,
 
 	disksize = PAGE_ALIGN(disksize);
 	meta = zram_meta_alloc(disksize);
+	if (!meta)
+		return -ENOMEM;
 	down_write(&zram->init_lock);
 	if (zram->init_done) {
 		up_write(&zram->init_lock);

drivers/rapidio/devices/tsi721.h

@@ -678,6 +678,7 @@ struct tsi721_bdma_chan {
 	struct list_head	free_list;
 	dma_cookie_t		completed_cookie;
 	struct tasklet_struct	tasklet;
+	bool			active;
 };
 
 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */

drivers/rapidio/devices/tsi721_dma.c

@@ -206,8 +206,8 @@ void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan)
 {
 	/* Disable BDMA channel interrupts */
 	iowrite32(0, bdma_chan->regs + TSI721_DMAC_INTE);
-
-	tasklet_schedule(&bdma_chan->tasklet);
+	if (bdma_chan->active)
+		tasklet_schedule(&bdma_chan->tasklet);
 }
 
 #ifdef CONFIG_PCI_MSI
@@ -562,7 +562,7 @@ static int tsi721_alloc_chan_resources(struct dma_chan *dchan)
 	}
 #endif /* CONFIG_PCI_MSI */
 
-	tasklet_enable(&bdma_chan->tasklet);
+	bdma_chan->active = true;
 	tsi721_bdma_interrupt_enable(bdma_chan, 1);
 
 	return bdma_chan->bd_num - 1;
@@ -576,9 +576,7 @@ err_out:
 static void tsi721_free_chan_resources(struct dma_chan *dchan)
 {
 	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
-#ifdef CONFIG_PCI_MSI
 	struct tsi721_device *priv = to_tsi721(dchan->device);
-#endif
 	LIST_HEAD(list);
 
 	dev_dbg(dchan->device->dev, "%s: Entry\n", __func__);
@@ -589,14 +587,25 @@ static void tsi721_free_chan_resources(struct dma_chan *dchan)
 	BUG_ON(!list_empty(&bdma_chan->active_list));
 	BUG_ON(!list_empty(&bdma_chan->queue));
 
-	tasklet_disable(&bdma_chan->tasklet);
+	tsi721_bdma_interrupt_enable(bdma_chan, 0);
+	bdma_chan->active = false;
+
+#ifdef CONFIG_PCI_MSI
+	if (priv->flags & TSI721_USING_MSIX) {
+		synchronize_irq(priv->msix[TSI721_VECT_DMA0_DONE +
+					   bdma_chan->id].vector);
+		synchronize_irq(priv->msix[TSI721_VECT_DMA0_INT +
+					   bdma_chan->id].vector);
+	} else
+#endif
+	synchronize_irq(priv->pdev->irq);
+
+	tasklet_kill(&bdma_chan->tasklet);
 
 	spin_lock_bh(&bdma_chan->lock);
 	list_splice_init(&bdma_chan->free_list, &list);
 	spin_unlock_bh(&bdma_chan->lock);
 
-	tsi721_bdma_interrupt_enable(bdma_chan, 0);
-
 #ifdef CONFIG_PCI_MSI
 	if (priv->flags & TSI721_USING_MSIX) {
 		free_irq(priv->msix[TSI721_VECT_DMA0_DONE +
@@ -790,6 +799,7 @@ int tsi721_register_dma(struct tsi721_device *priv)
 		bdma_chan->dchan.cookie = 1;
 		bdma_chan->dchan.chan_id = i;
 		bdma_chan->id = i;
+		bdma_chan->active = false;
 
 		spin_lock_init(&bdma_chan->lock);
 
@@ -799,7 +809,6 @@ int tsi721_register_dma(struct tsi721_device *priv)
 
 		tasklet_init(&bdma_chan->tasklet, tsi721_dma_tasklet,
 			     (unsigned long)bdma_chan);
-		tasklet_disable(&bdma_chan->tasklet);
 		list_add_tail(&bdma_chan->dchan.device_node,
 			      &mport->dma.channels);
 	}

drivers/rtc/rtc-s3c.c

@@ -580,10 +580,12 @@ static int s3c_rtc_suspend(struct device *dev)
 
 	clk_enable(rtc_clk);
 	/* save TICNT for anyone using periodic interrupts */
-	ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
 		ticnt_en_save = readw(s3c_rtc_base + S3C2410_RTCCON);
 		ticnt_en_save &= S3C64XX_RTCCON_TICEN;
+		ticnt_save = readl(s3c_rtc_base + S3C2410_TICNT);
+	} else {
+		ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
 	}
 	s3c_rtc_enable(pdev, 0);
 
@@ -605,10 +607,15 @@ static int s3c_rtc_resume(struct device *dev)
 
 	clk_enable(rtc_clk);
 	s3c_rtc_enable(pdev, 1);
-	writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
-	if (s3c_rtc_cpu_type == TYPE_S3C64XX && ticnt_en_save) {
-		tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
-		writew(tmp | ticnt_en_save, s3c_rtc_base + S3C2410_RTCCON);
+	if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
+		writel(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
+		if (ticnt_en_save) {
+			tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
+			writew(tmp | ticnt_en_save,
+					s3c_rtc_base + S3C2410_RTCCON);
+		}
+	} else {
+		writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
 	}
 
 	if (device_may_wakeup(dev) && wake_en) {

drivers/vfio/vfio_iommu_type1.c

@@ -186,12 +186,12 @@ static bool is_invalid_reserved_pfn(unsigned long pfn)
 	if (pfn_valid(pfn)) {
 		bool reserved;
 		struct page *tail = pfn_to_page(pfn);
-		struct page *head = compound_trans_head(tail);
+		struct page *head = compound_head(tail);
 		reserved = !!(PageReserved(head));
 		if (head != tail) {
 			/*
 			 * "head" is not a dangling pointer
-			 * (compound_trans_head takes care of that)
+			 * (compound_head takes care of that)
 			 * but the hugepage may have been split
 			 * from under us (and we may not hold a
 			 * reference count on the head page so it can

fs/hfsplus/options.c

@@ -75,7 +75,7 @@ int hfsplus_parse_options_remount(char *input, int *force)
 	int token;
 
 	if (!input)
-		return 0;
+		return 1;
 
 	while ((p = strsep(&input, ",")) != NULL) {
 		if (!*p)

fs/ocfs2/quota_global.c

@@ -717,6 +717,12 @@ static int ocfs2_release_dquot(struct dquot *dquot)
 	 */
 	if (status < 0)
 		mlog_errno(status);
+	/*
+	 * Clear dq_off so that we search for the structure in quota file next
+	 * time we acquire it. The structure might be deleted and reallocated
+	 * elsewhere by another node while our dquot structure is on freelist.
+	 */
+	dquot->dq_off = 0;
 	clear_bit(DQ_ACTIVE_B, &dquot->dq_flags);
 out_trans:
 	ocfs2_commit_trans(osb, handle);
@@ -756,16 +762,17 @@ static int ocfs2_acquire_dquot(struct dquot *dquot)
 	status = ocfs2_lock_global_qf(info, 1);
 	if (status < 0)
 		goto out;
-	if (!test_bit(DQ_READ_B, &dquot->dq_flags)) {
-		status = ocfs2_qinfo_lock(info, 0);
-		if (status < 0)
-			goto out_dq;
-		status = qtree_read_dquot(&info->dqi_gi, dquot);
-		ocfs2_qinfo_unlock(info, 0);
-		if (status < 0)
-			goto out_dq;
-	}
-	set_bit(DQ_READ_B, &dquot->dq_flags);
+	status = ocfs2_qinfo_lock(info, 0);
+	if (status < 0)
+		goto out_dq;
+	/*
+	 * We always want to read dquot structure from disk because we don't
+	 * know what happened with it while it was on freelist.
+	 */
+	status = qtree_read_dquot(&info->dqi_gi, dquot);
+	ocfs2_qinfo_unlock(info, 0);
+	if (status < 0)
+		goto out_dq;
 
 	OCFS2_DQUOT(dquot)->dq_use_count++;
 	OCFS2_DQUOT(dquot)->dq_origspace = dquot->dq_dqb.dqb_curspace;