"OBJECT_FILES_NON_STANDARD_vma.o := n" has a dependency bug. When
objtool source is updated, the affected object doesn't get re-analyzed
by objtool.
Peter's new variable-sized jump label feature relies on objtool
rewriting the object file. Otherwise the system can fail to boot. That
effectively upgrades this minor dependency issue to a major bug.
The problem is that variables in prerequisites are expanded early,
during the read-in phase. The '$(objtool_dep)' variable indirectly uses
'$@', which isn't yet available when the target prerequisites are
evaluated.
Use '.SECONDEXPANSION:' which causes '$(objtool_dep)' to be expanded in
a later phase, after the target-specific '$@' variable has been defined.
Fixes: b9ab5ebb14 ("objtool: Add CONFIG_STACK_VALIDATION option")
Fixes: ab3257042c ("jump_label, x86: Allow short NOPs")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Now that objtool is able to rewrite jump_label instructions, have the
compiler emit a JMP, such that it can decide on the optimal encoding,
and set jump_entry::key bit1 to indicate that objtool should rewrite
the instruction to a matching NOP.
For x86_64-allyesconfig this gives:
jl\ NOP JMP
short: 22997 124
long: 30874 90
IOW, we save (22997+124) * 3 bytes of kernel text in hotpaths.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210506194158.216763632@infradead.org
Teach objtool about the the low bits in the struct static_key pointer.
That is, the low two bits of @key in:
struct jump_entry {
s32 code;
s32 target;
long key;
}
as found in the __jump_table section. Since @key has a relocation to
the variable (to be resolved by the linker), the low two bits will be
reflected in the relocation's addend.
As such, find the reloc and store the addend, such that we can access
these bits.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210506194158.028024143@infradead.org
This allows the patching to to emit 2 byte JMP/NOP instruction in
addition to the 5 byte JMP/NOP we already did. This allows for more
compact code.
This code is not yet used, as we don't emit shorter code at compile
time yet.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210506194157.846870383@infradead.org
Currently objtool has 5 hashtables and sizes them 16 or 20 bits
depending on the --vmlinux argument.
However, a single side doesn't really work well for the 5 tables,
which among them, cover 3 different uses. Also, while vmlinux is
larger, there is still a very wide difference between a defconfig and
allyesconfig build, which again isn't optimally covered by a single
size.
Another aspect is the cost of elf_hash_init(), which for large tables
dominates the runtime for small input files. It turns out that all it
does it assign NULL, something that is required when using malloc().
However, when we allocate memory using mmap(), we're guaranteed to get
zero filled pages.
Therefore, rewrite the whole thing to:
1) use more dynamic sized tables, depending on the input file,
2) avoid the need for elf_hash_init() entirely by using mmap().
This speeds up a regular kernel build (100s to 98s for
x86_64-defconfig), and potentially dramatically speeds up vmlinux
processing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210506194157.452881700@infradead.org
Commit b9d79e4ca4 ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^
Fix it.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
Pull cifs fixes from Steve French:
"Three small SMB3 chmultichannel related changesets (also for stable)
from the SMB3 test event this week.
The other fixes are still in review/testing"
* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: if max_channels set to more than one channel request multichannel
smb3: do not attempt multichannel to server which does not support it
smb3: when mounting with multichannel include it in requested capabilities
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
Pull locking fixes from Thomas Gleixner:
"A set of locking related fixes and updates:
- Two fixes for the futex syscall related to the timeout handling.
FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
because it's not set the time namespace adjustment for clock
MONOTONIC is applied wrongly.
FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
always a relative timeout.
- Cleanups in the futex syscall entry points which became obvious
when the two timeout handling bugs were fixed.
- Cleanup of queued_write_lock_slowpath() as suggested by Linus
- Fixup of the smp_call_function_single_async() prototype"
* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Make syscall entry points less convoluted
futex: Get rid of the val2 conditional dance
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
Revert 337f13046f ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
locking/qrwlock: Cleanup queued_write_lock_slowpath()
smp: Fix smp_call_function_single_async prototype
Vasily Gorbik
Josh Poimboeuf
Peter Zijlstra
Linus Torvalds