[ Upstream commit 8bc2b3dca7 ]
The prior message is confusing users, which is the exact opposite of the
goal. If the message is being seen, one of the following situations is
happening:
1. the param is misspelled
2. the param is not valid due to the kernel configuration
3. the param is intended for init but isn't after the '--'
delineator on the command line
To make that more clear to the user, explicitly mention "kernel command
line" and also note that the params are still passed to user space to
avoid causing any alarm over params intended for init.
Link: https://lkml.kernel.org/r/20211013223502.96756-1-ahalaney@redhat.com
Fixes: 86d1919a4f ("init: print out unknown kernel parameters")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c360cc1cc ]
The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this >
needs to be >= to prevent an off by one bug. The priv->ntfy_blocks[]
array is allocated in gve_alloc_notify_blocks().
Fixes: 87a7f321bb ("gve: Recover from queue stall due to missed IRQ")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2498363310 ]
Using the % operator on a 64-bit variable is expensive and can
cause a link failure:
arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_get_max_width':
stm32-dma.c:(.text+0x170): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_set_xfer_param':
stm32-dma.c:(.text+0x1cd4): undefined reference to `__aeabi_uldivmod'
As we know that we just want to check the alignment in
stm32_dma_get_max_width(), there is no need for a full division, and
using a simple mask is a faster replacement.
Same in stm32_dma_set_xfer_param(), change this to only allow burst
transfers if the address is a multiple of the length.
stm32_dma_get_best_burst just after will take buf_len into account to fix
burst in case of misalignment.
Fixes: b20fd5fa31 ("dmaengine: stm32-dma: fix stm32_dma_get_max_width")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211103153312.41483-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af229d2c25 ]
Theorically, address pointers used by STM32 DMA must be chosen so as to
ensure that all transfers within a burst block are aligned on the address
boundary equal to the size of the transfer.
If this is always the case for peripheral addresses on STM32, it is not for
memory addresses if the user doesn't respect this alignment constraint.
To avoid a weird behavior of the DMA controller in this case (no error
triggered but data are not transferred as expected), force no burst.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211011094259.315023-4-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2c4618162 ]
The current conversion of skb->data_end reads like this:
; data_end = (void*)(long)skb->data_end;
559: (79) r1 = *(u64 *)(r2 +200) ; r1 = skb->data
560: (61) r11 = *(u32 *)(r2 +112) ; r11 = skb->len
561: (0f) r1 += r11
562: (61) r11 = *(u32 *)(r2 +116)
563: (1f) r1 -= r11
But similar to the case in 84f44df664 ("bpf: sock_ops sk access may stomp
registers when dst_reg = src_reg"), the code will read an incorrect skb->len
when src == dst. In this case we end up generating this xlated code:
; data_end = (void*)(long)skb->data_end;
559: (79) r1 = *(u64 *)(r1 +200) ; r1 = skb->data
560: (61) r11 = *(u32 *)(r1 +112) ; r11 = (skb->data)->len
561: (0f) r1 += r11
562: (61) r11 = *(u32 *)(r1 +116)
563: (1f) r1 -= r11
... where line 560 is the reading 4B of (skb->data + 112) instead of the
intended skb->len Here the skb pointer in r1 gets set to skb->data and the
later deref for skb->len ends up following skb->data instead of skb.
This fixes the issue similarly to the patch mentioned above by creating an
additional temporary variable and using to store the register when dst_reg =
src_reg. We name the variable bpf_temp_reg and place it in the cb context for
sk_skb. Then we restore from the temp to ensure nothing is lost.
Fixes: 16137b09a6 ("bpf: Compute data_end dynamically with JIT code")
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-6-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0dc3b93bd ]
Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling
progress, e.g. offset and length of the skb. First this is poorly named and
inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at
this layer.
But, more importantly strparser is using the following to access its metadata.
(struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data))
Where _strp_msg is defined as:
struct _strp_msg {
struct strp_msg strp; /* 0 8 */
int accum_len; /* 8 4 */
/* size: 12, cachelines: 1, members: 2 */
/* last cacheline: 12 bytes */
};
So we use 12 bytes of ->data[] in struct. However in BPF code running parser
and verdict the user has read capabilities into the data[] array as well. Its
not too problematic, but we should not be exposing internal state to BPF
program. If its really needed then we can use the probe_read() APIs which allow
reading kernel memory. And I don't believe cb[] layer poses any API breakage by
moving this around because programs can't depend on cb[] across layers.
In order to fix another issue with a ctx rewrite we need to stash a temp
variable somewhere. To make this work cleanly this patch builds a cb struct
for sk_skb types called sk_skb_cb struct. Then we can use this consistently
in the strparser, sockmap space. Additionally we can start allowing ->cb[]
write access after this.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5d2177a72 ]
A socket in a sockmap may have different combinations of programs attached
depending on configuration. There can be no programs in which case the socket
acts as a sink only. There can be a TX program in this case a BPF program is
attached to sending side, but no RX program is attached. There can be an RX
program only where sends have no BPF program attached, but receives are hooked
with BPF. And finally, both TX and RX programs may be attached. Giving us the
permutations:
None, Tx, Rx, and TxRx
To date most of our use cases have been TX case being used as a fast datapath
to directly copy between local application and a userspace proxy. Or Rx cases
and TxRX applications that are operating an in kernel based proxy. The traffic
in the first case where we hook applications into a userspace application looks
like this:
AppA redirect AppB
Tx <-----------> Rx
| |
+ +
TCP <--> lo <--> TCP
In this case all traffic from AppA (after 3whs) is copied into the AppB
ingress queue and no traffic is ever on the TCP recieive_queue.
In the second case the application never receives, except in some rare error
cases, traffic on the actual user space socket. Instead the send happens in
the kernel.
AppProxy socket pool
sk0 ------------->{sk1,sk2, skn}
^ |
| |
| v
ingress lb egress
TCP TCP
Here because traffic is never read off the socket with userspace recv() APIs
there is only ever one reader on the sk receive_queue. Namely the BPF programs.
However, we've started to introduce a third configuration where the BPF program
on receive should process the data, but then the normal case is to push the
data into the receive queue of AppB.
AppB
recv() (userspace)
-----------------------
tcp_bpf_recvmsg() (kernel)
| |
| |
| |
ingress_msgQ |
| |
RX_BPF |
| |
v v
sk->receive_queue
This is different from the App{A,B} redirect because traffic is first received
on the sk->receive_queue.
Now for the issue. The tcp_bpf_recvmsg() handler first checks the ingress_msg
queue for any data handled by the BPF rx program and returned with PASS code
so that it was enqueued on the ingress msg queue. Then if no data exists on
that queue it checks the socket receive queue. Unfortunately, this is the same
receive_queue the BPF program is reading data off of. So we get a race. Its
possible for the recvmsg() hook to pull data off the receive_queue before the
BPF hook has a chance to read it. It typically happens when an application is
banging on recv() and getting EAGAINs. Until they manage to race with the RX
BPF program.
To fix this we note that before this patch at attach time when the socket is
loaded into the map we check if it needs a TX program or just the base set of
proto bpf hooks. Then it uses the above general RX hook regardless of if we
have a BPF program attached at rx or not. This patch now extends this check to
handle all cases enumerated above, TX, RX, TXRX, and none. And to fix above
race when an RX program is attached we use a new hook that is nearly identical
to the old one except now we do not let the recv() call skip the RX BPF program.
Now only the BPF program pulls data from sk->receive_queue and recv() only
pulls data from the ingress msgQ post BPF program handling.
With this resolved our AppB from above has been up and running for many hours
without detecting any errors. We do this by correlating counters in RX BPF
events and the AppB to ensure data is never skipping the BPF program. Selftests,
was not able to detect this because we only run them for a short period of time
on well ordered send/recvs so we don't get any of the noise we see in real
application environments.
Fixes: 51199405f9 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-4-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8b8315e39 ]
We do not need to handle unhash from BPF side we can simply wait for the
close to happen. The original concern was a socket could transition from
ESTABLISHED state to a new state while the BPF hook was still attached.
But, we convinced ourself this is no longer possible and we also improved
BPF sockmap to handle listen sockets so this is no longer a problem.
More importantly though there are cases where unhash is called when data is
in the receive queue. The BPF unhash logic will flush this data which is
wrong. To be correct it should keep the data in the receive queue and allow
a receiving application to continue reading the data. This may happen when
tcp_abort() is received for example. Instead of complicating the logic in
unhash simply moving all this to tcp_close() hook solves this.
Fixes: 51199405f9 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-3-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7c386fbc2 ]
gcc warns about undefined behavior the vmalloc code when building
with CONFIG_ARM64_PA_BITS_52, when the 'idx++' in the argument to
__phys_to_pte_val() is evaluated twice:
mm/vmalloc.c: In function 'vmap_pfn_apply':
mm/vmalloc.c:2800:58: error: operation on 'data->idx' may be undefined [-Werror=sequence-point]
2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot));
| ~~~~~~~~~^~
arch/arm64/include/asm/pgtable-types.h:25:37: note: in definition of macro '__pte'
25 | #define __pte(x) ((pte_t) { (x) } )
| ^
arch/arm64/include/asm/pgtable.h:80:15: note: in expansion of macro '__phys_to_pte_val'
80 | __pte(__phys_to_pte_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
| ^~~~~~~~~~~~~~~~~
mm/vmalloc.c:2800:30: note: in expansion of macro 'pfn_pte'
2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot));
| ^~~~~~~
I have no idea why this never showed up earlier, but the safest
workaround appears to be changing those macros into inline functions
so the arguments get evaluated only once.
Cc: Matthew Wilcox <willy@infradead.org>
Fixes: 75387b9263 ("arm64: handle 52-bit physical addresses in page table entries")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211105075414.2553155-1-arnd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dc232a8ab ]
The id argument of ARM64_FTR_REG_OVERRIDE() is used for two purposes:
one as the system register encoding (used for the sys_id field of
__ftr_reg_entry), and the other as the register name (stringified
and used for the name field of arm64_ftr_reg), which is debug
information. The id argument is supposed to be a macro that
indicates an encoding of the register (eg. SYS_ID_AA64PFR0_EL1, etc).
ARM64_FTR_REG(), which also has the same id argument,
uses ARM64_FTR_REG_OVERRIDE() and passes the id to the macro.
Since the id argument is completely macro-expanded before it is
substituted into a macro body of ARM64_FTR_REG_OVERRIDE(),
the stringified id in the body of ARM64_FTR_REG_OVERRIDE is not
a human-readable register name, but a string of numeric bitwise
operations.
Fix this so that human-readable register names are available as
debug information.
Fixes: 8f266a5d87 ("arm64: cpufeature: Add global feature override facility")
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211101045421.2215822-1-reijiw@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c45231a766 ]
'netdev' is a managed resource allocated in the probe using
'devm_alloc_etherdev()'.
It must not be freed explicitly in the remove function.
Fixes: ee7da21ac4 ("net: Add driver for LiteX's LiteETH network interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fec40f850 ]
skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs,
but follow error handler branch when pn533_fill_fragment_skbs()
fails, skb is freed again, results in double free issue. Fix this
by not free skb in error path of pn533_fill_fragment_skbs.
Fixes: 963a82e07d ("NFC: pn533: Split large Tx frames in chunks")
Fixes: 93ad42020c ("NFC: pn533: Target mode Tx fragmentation support")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ac9dfd58b ]
Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed.
This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative
if @ifindex is negative.
We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned.
In this patch I chose to use hash_32() to get more entropy
from @ifindex, like llc_sk_laddr_hashfn().
UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26
index -43 is out of range for type 'hlist_head [64]'
CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
llc_sk_dev_hash include/net/llc.h:75 [inline]
llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697
llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404
__sys_bind+0x1e9/0x250 net/socket.c:1693
__do_sys_bind net/socket.c:1704 [inline]
__se_sys_bind net/socket.c:1702 [inline]
__x64_sys_bind+0x6f/0xb0 net/socket.c:1702
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa503407ae9
Fixes: 6d2e3ea284 ("llc: use a device based hash table to speed up multicast delivery")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe8605ca4 ]
There is one possible race window between zs_pool_dec_isolated() and
zs_unregister_migration() because wait_for_isolated_drain() checks the
isolated count without holding class->lock and there is no order inside
zs_pool_dec_isolated(). Thus the below race window could be possible:
zs_pool_dec_isolated zs_unregister_migration
check pool->destroying != 0
pool->destroying = true;
smp_mb();
wait_for_isolated_drain()
wait for pool->isolated_pages == 0
atomic_long_dec(&pool->isolated_pages);
atomic_long_read(&pool->isolated_pages) == 0
Since we observe the pool->destroying (false) before atomic_long_dec()
for pool->isolated_pages, waking pool->migration_wait up is missed.
Fix this by ensure checking pool->destroying happens after the
atomic_long_dec(&pool->isolated_pages).
Link: https://lkml.kernel.org/r/20210708115027.7557-1-linmiaohe@huawei.com
Fixes: 701d678599 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Henry Burns <henryburns@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9447f768b ]
In es58x_rx_err_msg(), if can->do_set_mode() fails, the function
directly returns without calling netif_rx(skb). This means that the
skb previously allocated by alloc_can_err_skb() is not freed. In other
terms, this is a memory leak.
This patch simply removes the return statement in the error branch and
let the function continue.
Issue was found with GCC -fanalyzer, please follow the link below for
details.
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/all/20211026180740.1953265-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d6366e743 ]
My previous patch correctly addressed the possible link failure, but as
Jani points out, the dependency is now stricter than it needs to be.
Change it again, to allow DRM_FBDEV_EMULATION to be used when
DRM_KMS_HELPER and FB are both loadable modules and DRM is linked into
the kernel.
As a side-effect, the option is now only visible when at least one DRM
driver makes use of DRM_KMS_HELPER. This is better, because the option
has no effect otherwise.
Fixes: 606b102876 ("drm: fb_helper: fix CONFIG_FB dependency")
Suggested-by: Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029120307.1407047-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8955c1a329 ]
As I want to test both DEVMAP and DEVMAP_HASH in XDP multicast redirect, I
limited DEVMAP max entries to a small value for performace. When the test
runs after amount of interface creating/deleting tests. The interface index
will exceed the map max entries and xdp_redirect_multi will error out with
"Get interfacesInterface index to large".
Fix this issue by limit the tests in netns and specify the ifindex when
creating interfaces.
Fixes: d232924762 ("selftests/bpf: Add xdp_redirect_multi test")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211027033553.962413-5-liuhangbin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Halaney
Imre Deak
Dan Carpenter
Arnd Bergmann
Amelie Delaunay
Jussi Maki
John Fastabend
Reiji Watanabe
Christophe JAILLET
Chengfeng Ye
Eric Dumazet
Ian Rogers
Miaohe Lin
Marc Kleine-Budde
Vincent Mailhol
Alex Deucher
Fabio Estevam
Hangbin Liu